TORP_0360.docx

1.0 MISSION OBJECTIVE.

The Department of Defense Counter-Narcoterrorism Program Office (CNTPO) currently being managed by the Counter Narcotics (CN) and Global Threats (CN&GT) Division was established to create Counter-Narcoterrorism Technology networks, infrastructure, and capabilities worldwide that are focused on the detection, identification, and disruption of narcoterrorist activities and organizations. This task effort will support the War Fighter in the combating of narco-terrorism worldwide.

2.0 SCOPE.

2.1 Task Order (T/O) Objective.

This T/O objective is to purchase vehicles for multiple agencies that support ongoing CN training and operations efforts in the Republics of Kazakhstan, Pakistan, Tajikistan and Uzbekistan.

2.2 Basic Contract References.

This T/O Performance Work Statement (PWS) establishes the requirements for the Contractor to provide support in the Basic Contract task area of 4.3.2.7 Logistics Support and Equipment; and 4.3.3.4 Material and Equipment Purchase.

3.0 PERFORMANCE REQUIREMENTS.

3.1 Base Requirement - MAN TGM 13.280 4X4 Vehicles for Uzbekistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of ten (10) MAN TGM 13.280 4X4 vehicles as described and specified in Appendix A. This appendix identifies Brand Name Only and point of delivery (POD) requirements. General delivery details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.2 Option Item A – GAZ-2705-288 Vehicles w/Canine Compartment for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of two (2) GAZ-2705-288 vehicles with Canine Compartment as described and specified in Appendix B. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.3 Option Item B – Skoda Superb Ambition or Equivalent Sedan Automobiles for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of six (6) Skoda Superb Ambition or equivalent sedan automobiles as described and specified in Appendix C. This appendix identifies minimum salient characteristics and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.4 Option Item C – Baggi KLM01100 GK All-Terrain Vehicles (ATV) for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of four (4) Baggi KLM-1100 GK ATV as described and specified in Appendix D. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.5 Option Item D – Toyota Hilux 4-Door 4X4 Vehicles for Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 53 Toyota Hilux 4-door 4X4 vehicles as described and specified in Appendix E. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.6 Option Item E – Kamaz 43118 Personnel & Cargo Vehicles for Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of four (4) Kamaz 43118 personnel and cargo vehicles as described and specified in Appendix F. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.7 Option Item F – Toyota HIACE Commuter Buses for Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 19 Toyota HIACE Commuter Buses as described and specified in Appendix G. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.8 Option Item G – Toyota HIACE Cargo Vans – Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 12 Toyota HIACE Cargo Vans (No Windows) as described and specified in Appendix H. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.9 Option Item H – Toyota GXL Prado 4x4 Vehicles – Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of three (3) Toyota GXL Prado 4X4 vehicles as described and specified in Appendix I. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.10 Option Item I – Toyota Hilux Single Cabin Vehicles for Pakistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 29 Toyota Hilux Single Cabin vehicles as described and specified in Appendix J. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.11 Option Item J – Toyota Hilux Double Cabin Vehicles for Pakistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 19 Toyota Hilux Double Cabin vehicles as described and specified in Appendix K. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.12 Option Item K – Isuzu PKB-211-GHRN Water Bowzer for Pakistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of four (4) Isuzu PKB-211-GHRN 3,000 gallon Water Bowzer as described and specified in Appendix L. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.13 Option Item L – Isuzu or Hino 2.5 Ton Heavy Duty Truck – Pakistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of nine (9) Isuzu or Hino 2.5 Ton Heavy Duty trucks as described and specified in Appendix M. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.14 Option Item M – Toyota Vigo Champ GX for Pakistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 44 Toyota Vigo Champ GX 4X4 Sport Utility Vehicle (SUV) as described and specified in Appendix N. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.15 Option Item N – MAN TGM 13.280 4X4 Vehicles for Uzbekistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of ten (10) MAN TGM 13.280 4X4 vehicles as described and specified in Appendix A. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.16 Option Item O – MAN TGM 13.280 4X4 Vehicles for Uzbekistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of ten (10) MAN TGM 13.280 4X4 vehicles as described and specified in Appendix A. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.17 Option Item P – MAN TGM 13.280 4X4 Vehicles for Uzbekistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of ten (10) MAN TGM 13.280 4X4 vehicles as described and specified in Appendix A. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.18 Option Item Q – GAZ-2705-288 Vehicles w/Canine Compartment for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of two (2) GAZ-2705-288 vehicles with Canine Compartment as described and specified in Appendix B. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.19 Option Item R – GAZ-2705-288 Vehicles Canine Compartment for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of two (2) GAZ-2705-288 vehicles with Canine Compartment as described and specified in Appendix B. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.20 Option Item S – GAZ-2705-288 Vehicles w/Canine Compartment for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of two (2) GAZ-2705-288 vehicles with Canine Compartment as described and specified in Appendix B. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.21 Option Item T – GAZ-2705-288 Vehicles w/Canine Compartment for Kazakhstan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of one (1) GAZ-2705-288 vehicle with Canine Compartment as described and specified in Appendix B. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.22 Option Item U – Toyota Hilux 4-Door 4X4 Vehicles for Tajikistan.

The Contractor shall procure, deliver and ensure receipt and turn-over acceptance of 52 Toyota Hilux 4-door 4X4 vehicles as described and specified in Appendix E. This appendix identifies Brand Name Only and POD requirements. General performance details are listed under section 3.23. Other performance requirements are listed under section 5.0.

3.23 General Delivery.

3.23.1 Single Delivery. All items as described and specified within each appendix shall be delivered in a single shipment to the respective delivery location unless the Contractor can demonstrate significant value to the United States Government (USG) for a multiple delivery approach. The Contractor shall provide DD250 Forms and the list of equipment and materials (including serial numbers) with by item costs to the Contracting Officer’s Representative (COR)/Program Manager (PM) per paragraph 10.5. Warranty plans shall be provided IAW paragraph 10.2. Partial shipments of ordered items are not authorized unless preapproved by the Contracting Officer (KO). Any change to the POD address shall be approved by the KO via a modification to the T/O.

3.23.2 Final delivery of equipment and material shall be Free on Board destination. All equipment and material shall clear customs prior to delivery. Use of an in-country broker is highly encouraged to guarantee proper customs clearance and delivery. The Contractor shall coordinate and provide required documentation (see paragraph 3.23.6) at least 60 days in advance for those individuals who will be traveling to all respective countries to support this effort.

3.23.3 The Contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment and materials required by this T/O no later than 365 days after T/O award. The Contractor shall seek delayed delivery authorization from the KO should long-lead time items prevent meeting the required delivery deadline. The request for delayed delivery authorization shall be submitted to the USG as soon as the Contractor becomes aware of the potential delay.

3.23.4 Delivery Points of Contact (POC). The POCs for delivery coordination will be provided at the Kick-Off Meeting.

3.23.5 Life Support during Delivery. The Contractor shall be responsible for providing life support services (lodging and air/ground transportation) while in country for delivery.

3.23.6 Diplomatic Notice (DIP Note). To coordinate with Uzbekistan, Kazakhstan, Tajikistan and Pakistan agencies, the CN PM/Program Advisor must deliver the coordination in a DIP Note. For instruction on the process see section 10.6.

4.0 WORK HOURS AND LOCATION.

The principal places of performance shall be at the Contractor’s discretion for successful performance and delivery to the Republics of Kazakhstan, Pakistan, Tajikistan and Uzbekistan respectively. The Contractor may be required to provide labor hours in excess of 40 hours per work week to include holiday and weekends, and/or during irregular times and shifts based upon Kazakhstan, Pakistan, Tajikistan and Uzbekistan operations and exercises.

5.0 OTHER PERFORMANCE REQUIREMENTS.

5.1 Defense Base Act (DBA) Insurance. The Contractor shall provide DBA insurance for all personnel performing duties outside the continental United States (OCONUS).

5.2 Taxes, Fees, Agreements.

5.2.1 Value Added Tax (VAT), Customs, Duties. The Contractor shall be responsible for all associated taxes (e.g. VAT), duties and customs fees, and other related charges for Tajikistan and Kazakhstan (if waiver or exemption is not available). Historically Uzbekistan has had very high (est. 20%) customs fees and taxes for the importation and delivery of material that is not accepted as locally or regionally produced. At this time, waivers or exemptions are available to preclude the payment of the VAT tax, customs fees, duties and other related charges. The Special Projects Office works closely with the Uzbek Government to sign agreements to waive these fees. Kazakhstan, also, has typically had very high (est. 20%) customs fees and taxes for the importation and delivery of material that is not accepted as locally or regionally produced. At this time, waivers or exemptions are available to preclude the payment of the VAT tax, customs fees, duties and other related charges. The Contractor shall first attempt to obtain a waiver or exemption before any other avenues to satisfy this requirement. The USG is available for coordination and assistance during the waiver or exemption process as needed. Waivers or exemptions shall be documented before shipment if possible. Pakistan requires a Non Objection Certificate (NOC) prior to delivery of equipment. Once the Pakistan government issues the NOC, all VAT/Customs fees are waived.

5.2.2 Arms Export Control Act and International Traffic in Arms Regulations (ITAR). The Contractor shall also be responsible for all aspects of export compliance, including compliance with the Arms Export Control Act and ITAR.

5.2.3 Technical Assistance Agreements (TAA). The Contractor shall ensure the appropriate Technical Assistance Agreements (TAAs) and/or applicable export licenses are in place before conducting any activity under this T/O that requires such approval and documentation.

5.3 Equipment. All equipment and materials shall be new and of good quality and durability according to commercially accepted quality standards for similar products. All vehicles shall be most current year model. All vehicles shall meet or exceed all country vehicle standards. Unless otherwise specified in the applicable appendix, all vehicles shall be delivered with a full tank of fuel. The grade or rating of fuel shall be no lower than what is recommended by the OEM if not specified elsewhere.

5.4 Kick-off Meeting. The Contractor shall participate in a Kick-off meeting to be coordinated by the USG after contract award.

5.5 Human Rights Vetting. Before any services are provided to foreign counterdrug personnel, the Contractor shall ensure that any personnel who will or may interact with USG personnel:

5.5.1 Are vetted for human rights violations through the Department of State (DoS) in accordance with (IAW) the Leahy Vetting Process;

5.5.2 Has been advised in writing by DoS that there is no credible information concerning gross violations of human rights by any of the personnel receiving services;

5.5.3 That maintained by the Contractor and made available to the USG upon request.

6.0 TEMPORARY DUTY TRAVEL (TDY).

The Contractor shall perform TDY travel, as required or as directed by the PM and COR. The Contractor shall coordinate all travel with PM/COR per CN&GT procedures. Only travel pre-approved by the COR/PM will be reimbursed under this T/O. See Appendix O. All approved travel will be paid IAW the Basic Contract by reimbursement to the Contractor.

7.0 GOVERNMENT FURNISHED EQUIPMENT, INFORMATION, MATERIAL OR SERVICES (GFE/GFI/GFM/GFS).

The Government will not provide equipment, information, material or services in support of this effort.

8.0 SECURITY.

All work performed under this T/O shall be Unclassified.

9.0 T/O CONTRACT DATA REQUIREMENTS LIST (CDRL).

The following are required as set forth in the Basic Contract and are applicable to this T/O:

Table 1 - T/O CDRLs

1. Submit one copy each electronically in Adobe (PDF) or as a Microsoft Office Suite product to the COR, PM, AMIC Acquisition Org Email box - amic.pmt.acq@us.af.mil, and MEI cntposeta@meicompany.com. If copies are to exceed five (5) megabytes of data refer to Appendix P.

2. All deliverables shall be submitted by the established due date. If the due date falls on a weekend or holiday, the deliverable shall be submitted prior to the established due date.

3. Unless specified otherwise, calendar days will be used.

9.1 Contractor’s Progress, Status and Management Report (CDRL A002). The Contractor shall provide a monthly report summarizing all tasks performed, projected tasks scheduled (to include procurement and delivery) and any issues encountered. The report shall, at a minimum, contain an overall schedule, the current status of funding on the T/O, accomplishments completed, any potential problems, and any lessons learned. These reports shall be delivered IAW CDRL A002 Expenditure Report of the Basic Contract and Data Item Description DI-MGMT-80227.

9.2 Licenses, Export Agreements & Certifications. (CDRL A00H). The Contractor shall provide Licenses, Export Agreements and Certifications in response to the T/O Requirement Plan (TORP). These documents shall be provided prior to final delivery unless otherwise directed by the KO. At a minimum, the Licenses, Export Agreements and Certifications shall include the following:

· Cover letter describing purpose or submission, POC, contract/TORP number#; description of each attachment/enclosure; Original Documents(s) Nomenclature (if revision)

· Attachment should be originals or certified originals and be dated, signed by cognizant authority, and indicate specific agreement terms

· English translation of foreign language documents is required

10.0 UNIQUE DATA REQUIREMENTS LIST.

The following are applicable to this T/O:

Table 2 – Unique T/O Deliverables

1. Submit one copy each electronically in Adobe (PDF) or as a Microsoft Office Suite product to the COR, PM, AMIC Acquisition Org Email box - amic.pmt.acq@us.af.mil, and MEI cntposeta@meicompany.com. If copies are to exceed five (5) megabytes of data refer to Appendix P.

2. All deliverables shall be submitted by the established due date. If the due date falls on a weekend or holiday, the deliverable shall be submitted prior to the established due date.

3. Unless specified otherwise, calendar days will be used.

10.1 T/O Quality Control Plan (QCP). The Contractor shall provide a draft T/O QCP with their response to the TORP. The final plan delivery as stated in the above table. At a minimum, the T/O QCP shall address the following:

· Quality Control (QC) Execution: The plan shall not be cursory, but discuss specifically how the prime Contractor shall execute its QC responsibilities with respect to this T/O. The T/O QCP shall include a clearly defined QC process, key performance indicators, QC schedules, and QC personnel (by name), to include those that shall be performing sub-contractor oversight and oversight of activities in-theater. The plan shall address how QC trend analysis and tracking of corrective actions shall be accomplished. The T/O QCP shall discuss the Prime Contractor’s management activity that shall provide oversight and involvement in the QC process. QC personnel should not be buried in the organization, but should have a direct line to upper management.

· Reporting: Monthly status reports shall specifically discuss QC activities over the reporting period and planned activities for the next period. Information shall specifically address WHO conducted the QC, WHEN was the QC executed, HOW was the QC executed and WHAT the findings and corrective actions were. Trends over time shall be identified and discussed thoroughly.

· Invoice QC and Review: The Contractor shall discuss how invoice reviews shall be conducted, to include discussion on how the Prime Contractor, sub-contractor, and supporting data will be reviewed for consistency with T/O requirements and the Contractor’s approach to execute the T/O.

10.2 Warranty Plan. The Contractor shall provide a Warranty Plan for each delivery to each End User (EU) that clearly addresses the following:

· All items normally provided with a warranty shall be provided with standard OEM warranties. The terms of the warranties shall be clearly presented in the name of EU. The effective start date of the warranty shall coincide with date of acceptance of the equipment and materials by the USG.

· As prescribed in FAR 12.404, the Contractor agrees that the supplies or services furnished under this contract shall be covered by the most favorable commercial warranties the Contractor gives to any customer for such supplies or services and that the rights and remedies provided herein are in addition to and do not limit any rights afforded to the Government by any other clause of this contract.

· All utilization of commercially available OEM warranties associated with the equipment shall be the responsibility of the EU upon receipt of the material from the USG.

· All Warranty Plans shall be in Russian, English and the OEMs language for clarity for all countries except Pakistan. The documents sent to Pakistan shall be provided in Urdu instead of Russian.

· Warranty Plan shall contain (as a minimum):

· OEM POC’S;

· List of items by OEM with part numbers, registration/serial numbers, and their warranty terms (i.e., length of warranty, start date, type (limited, extended, standard);

· Instructions for product registration with each OEM;

· Requirements to keep the warranty valid;

· How to execute a warrant call;

10.7 Technical Interchange Meetings. The Contractor shall participate in technical interchange meetings, to be scheduled upon request of the responsible KO or written designee, to discuss and to informally evaluate the Contractor’s efforts and accomplishments in direct relation to specific T/O requirements. During the meetings, the Contractor shall present necessary data to enable a joint review of its various assigned tasks, attendant schedules, and resource expenditures. The Contractor shall attend and participate in technical discussions and shall inform, in a timely fashion, the COR and/or PM, as applicable, of any problems with contract execution and any proposed solutions. The Contractor shall attend and participate in other meetings, as scheduled by the responsible KO or written designee. Unless noted elsewhere, all meetings will be scheduled as teleconferences normally not to exceed one hour, each instance. For planning purposes, the Contractor shall plan to participate in teleconferences on a monthly basis until all requirements have been satisfied. The frequency shall be adjusted based on the current status and issues of this requirement.

11.0 Services Summary. The Services Summary is a list of critical tasks that must be performed by the Contractor.

TABLE 3 – SERVICES SUMMARY

10.0 Contractor’s Proposal &

QCP

Performance is acceptable when:

a) 100% of deliverable requirements are met and received on time

AND

b) critical information is accurate 100% Random Sample

Cost, Schedule and Performance is acceptable Periodic Inspections 100% Random Sample

Execution:

a. Invoicing

b. Travel

c. Licensing

d. Plans

e. Delivery

Performance is acceptable when:

a. Executed with

b. Executed with

c. Executed with

d. Executed with

e. Executed with Periodic Inspections 100% Random Sample

UNDER DEVELOPMENT TO BE UPDATED PRIOR TO FINAL

APPENDIX A: MAN TGM 13.280 4X4 TRUCK - UZBEKISTAN

BASE REQUIREMENT

4X4 VEHICLES

(Brand Specific: MAN TGM 13.280 – 4X4 Vehicles)

Specifications:

Type of body: TRUCK BODY (Covered)

Loading capacity - minimum 13 ton

Suspension - steel-steel suspension

Truck will be used for delivery of cargo in possible off-road situations.

Wheel base: 4200mm

Overhang: 2125mm

Color: WHITE

POD:

State Border Protection Committee of the National Security Service 5A, Abdulla Kodiriy St.

Tashkent, 100128, Uzbekistan

NOTE: Same information applies to Options N-P at 10 vehicles each per option for a total of 40 TGM 13.280 vehicles for this TORP (if all options are exercised).

APPENDIX A (CONTINUED): MAN TGM 13.280 4X4 TRUCK - UZBEKISTAN

APPENDIX A (CONTINUED): MAN TGM 13.280 4X4 TRUCK - UZBEKISTAN

Appendix b: GAZ-2705-288 VEHICLE w/canine compartment – kazakhstan

GAZ-2705-288 or equivalent van chassis

Minimum Salient Characteristics:

Engine – fuel efficient gasoline, UMZ 4216 type, injection, four-stroke, 8-valve, liquid cooling, 2.89L, 106.8 h.p. - synchronized mechanical 5 mode transmission

· disc front breaks, rear drum brakes

· Fabric interior- 185/75R16C tires

· hydraulic power steering

· air ventilation and heating

· front and rear mud flaps

· rear tow bar, spare tire

· tinted coating of 6 windows

· central locking mechanism

· two zone heating and air conditioning

· Color: White

· OEM handbook and one set of spare keys

· OEM standard provided warranty for make and model

· All manuals / written information provided by manufacturer shall be in Russian.

Canine Compartment Requirements: Stationary box for working dogs to store no more than 4 working dogs to be transported in each vehicle (the size of grown-up German Sheppard). The box is to be single frame divided into four metal cages with doors – two on top, two at the bottom. The box dimensions: width – 1550 mm at the bottom, 1070 mm on top; height – 1500 mm; length into the cabin – 1670 mm. The floors in each cage should be made of channeled aluminum. To load dogs into top cages there shall be an unfolding ramp. The dogs will be loaded into the box cages from the back doors of the vehicle. The box should be separated from the cabin by solid partition allowing the flow of air.

Electric air pump for tire inflation:

12 volt compressor hooks up to vehicle battery or vehicle 12 volt power supply.

Maximum air pressure: 150 PSI.

Accessories to include: 2 nozzle adapters.

POD:

Military Unit 2458 Suyunbay Street 351 Almaty, Kazakhstan

NOTE: Same information applies to Options A, Q-S at two (2) vehicles each per option but Option T is only for One (1) vehicle each which comes to a total of 9 GAZ-2705-288 or equivalent vehicles for this TORP (if all options are exercised).

Appendix C: skoda superb ambition or equivalent - KAZAKHSTAN

Minimum Salient Characteristics:

Dimensions: L – 4833 mm; W – 1817 mm; H – 1482 mm; clearance – 159 mm. D Plus, business-class 5-door, 5-seat sedan car.

Engine: 2.0 TSI/ 200 h.p. gasoline; working volume – 1984 cubic sm; turbo blow, direct high pressure injection system; Euro 3 standard.

Front wheel drive; Automatic 6-shift transmission gearbox 7J X16″ rims with 205/55 R16 tires

Weight – 1540 kg

60 litre fuel tank

Rear LED lights, Twindoor trunk door, immobilizer, front and side airbags for the driver and front passenger, foldable back seats, front and rear heated seats, rear mud flaps, Electronic Stability Control, Anti-Breaking System, Motor Speed Regulation, Anti-Slip Regulation, Electronic Differential Lock, Hydraulic Brake Assistant, antifog lights with “Corner” function, Alcantara leather interior, climate control, electric heated side view mirrors with turn signals, electric front seats, rear parking sensors.

OEM handbook and one set of spare keys. OEM standard provided warranty for make and model. All manuals and written information provided by vehicle manufacturer shall be in Russian.

Color: Black

Electric air pump for tire inflation:

12 volt compressor hooks up to vehicle battery or vehicle 12 volt power supply.

Maximum air pressure: 150 Pounds per Square Inch.

Accessories to include: 2 nozzle adapters.

Point of Delivery:

Ministry of Internal Affairs of the Republic of Kazakhstan Tauelsizdik Avenue 1 Astana, Kazakhstan appendix d: BAGGI KLM-1100 GK ALL-TERRAIN VEHICLES - KAZAKHSTAN

Characteristics:

Engine: Dual Overhead Camshafts 1100 cubic sm, 4-cylinder, 16-valve, 86 h.p.

5-shift manual gearbox, clearance – 350mm, max. speed – 120 km/h, weight – 455 kg, dimensions: 2930 mm L, 1765 mm W, 1570 mm H.

The vehicle should have “sand-colored” body and fabric.

Items to be supplied with the vehicles:

Lug nut wrench

One (1) complete set of sand spare tires (set of 4 tires) for the vehicle

Warranty: 1-year

All OEM documentation and manuals in Russian language.

Note: the fuel tank of the vehicle must be full.

Point of Delivery:

Interregional Section on Combating Drug Business “Delta-Dolina” Tole Bi village, Shu district Zhambyl oblast, Kazakhstan

APPENDIX E: TOYOTA HILUX 4 DOOR 4X4 - TAJIKISTAN

52 (Opt U)

MECHANICAL

4.0L DOHC 24v v6 Variable Valve Technology with Intelligence (VVT-I) 236hp engine, 5-speed Electronically Controlled Automatic Transmission with intelligence automatic transmission,4wdemand: part-time 4x4 sys w/ 2-speed, electronically controlled transfer case, automatic limited-slip differential, coil-spring double wishbone front suspension, rear leaf spring suspension with staggered, outboard-mounted gas shock absorbers, variable-assist power rack-&-pinion steering, power-assisted front disc/rear drum brakes,16" styled steel wheels, p245/75r16 tires. Diesel engine is preferred.

Full Set of BF Goodrich (or equivalent) All-Terrain T/A Key Feature Off-Road Tires (245/65R16) for each HILUX

Exterior black grille insert, black door, handles, mirrors, front/rear bumpers, SMC inner bed w/steel outer panels, storage, rail caps & removable tailgate, deck rail system w/4 adjustable tie-down cleats comfort and convenience air conditioning, power windows / door locks / mirrors, cloth bucket front seats w/ pass fold-flat, driver seat w/ adjustable lumbar support, 60/40 split rear bench seat w/ adjustable headrests, AM/FM CD, 6 speakers, Bluetooth, USB, aux jack, tilt/telescoping steering wheel, 2-speed windshield wipers, dual 12v aux power outlets unclassified star safety system- includes vehicle, stability control, traction control, anti-lock brake system (abs), electronic, brake force distribution, brake assist, smart stop technology (SST), daytime running lights, driver & front passenger advanced airbag system, seat-mounted side & side curtain airbags, 3-point seatbelts for all seating, positions; driver-side electric & adjustable lumbar and electric on all passenger seats, driver & front passenger active headrest, side-impact door beams, tire pressure monitor system color: white

Points of Delivery:

Fifty (50) to (25 each for Options D & U):

Border guard 31 Shotemur Str.

Dushanbe, 734025, Tajikistan

Twenty (20) to (10 each for Options D & U):

National Guard 365 Nabiev Str.

Dushanbe, 734036, Tajikistan

Ten (10) to (five (5) each for Options D & U):

Drug Control Agency 52 Negmat Karabaeva Str.

Dushanbe, 734018, Tajikistan

Ten (10) to (five (5) each to Options D & U):

Ministry of Interior Omon 17 Saadi Sherozi Str.

Dushanbe, 734018, Tajikistan

Fifteen (15) to (eight (8) to Option D; seven (7) to Option U):

GKNB-Alphas 24, Mastonqulov Str.

Dushanbe, 734012, Tajikistan

APPENDIX F: KAMAZ 43118 personnel and cargo vehicles– TAJIKISTAN

Weight and Load Capacities:

Vehicles curb weight, kg 10400 Front axle load, kg 4700 Rear axle load, kg 5700 Vehicle load carrying capacity, kg 10000 Gross weight, kg 20700 Front axle load, kg 5550 Rear axle load, kg 15150 Trailer gross weight, kg 12000 Road train allowed gross weight 32700

Engine:

Model: 740.13-260 (E-1) Type diesel: turbocharged Rated horsepower: kwt (H.P) 191 (260) At crankshaft rotation: rpm 2200 Maximum torque: NM (kgcm) 931 (95) At crankshaft rotation: rpm 1300-1500 Arrangement and number of cylinders: V-shape, 8

Platform:

Type vehicle-borne metal with removable benches, equipped with removable canopy and frame Inside length: mm 4800 Inside width: mm 2320

Color: OD Green

Points of Delivery:

One (1) to:

Border Guard 31, Shotemur Str.

Dushanbe, 734025, Tajikistan

One (1) to:

National Guard 365, Nabiev Str.

Dushanbe, 734036, Tajikistan

One (1) to:

Ministry of Interior OMON 17 Saadi Sherozi Str.

Dushanbe, 734018, Tajikistan

One (1) to:

GKNB-Alphas

APPENDIX G: TOYOTA HIACE CARGO VANs - tajikistan

Engine Engine type: Diesel Engine code: 1KD-FTV Capacity (cc): 2982 Engine description: Four cylinder in-line, belt driven, DOHC, four valves per cylinder, twin balance shafts.

Number of cylinders: 4 Configuration: In-line Head composition: Light alloy Valve gear type: DOHC Number of valves per cylinder: 4 Fuel Fuel type: Diesel Drivetrain Driven wheels: Rear Transmission Transmission type: Automatic Number of gears: 4 Transmission description: Automatic Steering Type: Rack & Pinion Disc brakes Number of disc brakes: 2 Number of ventilated disc brakes: 2 Front brake rotor size (mm): 285 x 28 Suspension - front Suspension description: Independent, double wishbone type, upper torsion bar spring, hydraulic dampers and ball-joint mounted anti-roll bar.

Suspension type: Wishbone Suspension - rear Suspension description: Rigid axle, semi-elliptic leaf springs with hydraulic dampers.

Suspension type: Beam Tires - front Tire width (mm): 195 Tire rating: S Tires - rear Tire width (mm): 195 Tire rating: S Wheels - front Rim type: Steel Rim diameter (inch): 15 Rim width (inch): 6 Wheel covers: Full Wheels - rear Rim type: Steel Rim diameter (inch): 15 Rim width (inch): 6 Wheel cover Spare wheel - under body Spare wheel type: Full-size Rim type: Steel Spare wheel tire size195 R15ers: Full Bumpers - front Color of bumpers: Black/grey Bumpers - rear Color of bumpers: Black/grey Headlights Lens type: Complex surface Headlight bulb type: Halogen Exterior door handles Exterior door handles color: Black Paint Paint type: Gloss White Seat upholstery Main seat material: Cloth Floor covering Floor covering in cabin: Plastic/rubber Grab handles Number of grab handles: 3 Front seat - driver Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Front seat - passenger Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Head restraints - front seats Number of headrests: 2 Air conditioning Standard Power windows – front: Standard Power steering Power steering type: Hydraulic Steering wheel Steering wheel type: Plastic/urethane Tilting adjustment: Standard Cruise Control: Standard Door mirrors - driver's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Black Door mirrors - passenger's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Black Rear view mirror Automatic dimming rear view mirror: Standard Windscreen wipers Intermittent windscreen wipers: Fixed Rear window Rear window wipers: Intermittent Main dashboard display Type: Analog Gear position indicator in dash: Standard Low fuel level warning: Standard Anti-Skid Brakes (ABS) - All wheels Standard Front airbag driver: Standard Front airbag passenger: Standard Front seat belts center: Standard Front seat belts driver Pre-tensioner seatbelts: Standard Front seat belts force limiter: Standard Front seat belts - passenger Pre-tensioner seatbelts: Standard Front seat belts force limiter: Standard

Place of Delivery:

Drug Control Agency 52, Negmat Karabaeva Str.

Dushanbe, 734018, Tajikistan

APPENDIX H – TOYOTA HIACE COMMUTER BUSES – TAJIKISTAN

Specifications:

Seating capacity14 Fuel tank - main Capacity (L) 70 Fuel type: Diesel Engine Engine type: Diesel Engine code: 1KD-FTV Capacity: (cc) 2982 Engine description: Four cylinder in-line, belt driven, DOHC, four valves per cylinder, twin balance shafts.

Number of cylinders: 4 Configuration: In-line Head composition: Light alloy Valve gear type: DOHC Number of valves per cylinder: 4 Fuel system Injection type: Diesel common rail Ignition type: Diesel Drivetrain Driven wheels: Rear Transmission Transmission type: Automatic Number of gears: 4 Transmission description: Automatic Steering Type: Rack & Pinion Disc brakes Number of disc brakes: 2 Number of ventilated disc brakes: 2 Front brake rotor size (mm): 285 x 28 Suspension - front Suspension description: Independent, double wishbone type, upper torsion bar spring, hydraulic dampers, ball-joint mounted anti-roll bar.

Suspension type: Wishbone Suspension - rear Suspension description: Rigid axle, semi-elliptic leaf springs with hydraulic dampers Suspension type: Beam Tires - front Tire width (mm): 195 Tire rating: S Tires - rear Tire width (mm): 195 Tire rating: S Wheels - front Rim type: Steel Rim diameter (inch): 15 Rim width (inch): 6 Wheel covers: Full Wheels - rear Rim type: Steel Rim diameter (inch): 15 Rim width (inch): 6 Wheel covers: Full Spare wheel - under body Spare wheel type: Full-size Rim type: Steel Spare wheel tire size: 195 R15C

Bumpers - front Color of bumpers: Black/grey Bumpers - rear Color of bumpers: Black/grey Headlights Lens type: Complex surface Headlight bulb type: Halogen Exterior door handles Exterior door handles color: Black Paint Paint type: White Grab handles Number of grab handles: 12 Front seat - driver Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Front seat - passenger Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Rear seats Front facing: Standard Head restraints - front seats Number of headrests: 2 Head restraints - rear seats Number of headrests: 10 Air conditioning Rear air outlet: Standard Ventilation system: Standard Power windows – front Standard Power steering Power steering type: Hydraulic Steering wheel Steering wheel type: Plastic/urethane Tilting adjustment: Standard Cruise Control: Standard Door mirrors - driver's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Black Door mirrors - passenger's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Black Rear view mirror Automatic dimming rear view mirror: Standard Windscreen wipers Intermittent windscreen wipers: Fixed Rear window Rear window wipers: Intermittent Main dashboard display Type: Analog Gear position indicator in dash: Standard Low fuel level warning: Standard Anti-Skid Brakes (ABS): All wheels Standard Front airbag driver: Standard Front airbag passenger: Standard Front seat belts driver Pre-tensioner seatbelts: Standard Front seat belts force limiter: Standard Front seat belts passenger Pre-tensioner seatbelts: Standard Front seat belts force limiter: Standard Rear seat belts center Seatbelt type: 3-point Rear seat belts driver's side Seatbelt type: 3-point Rear seat belts passenger's side Seatbelt type: 3-point

Place of Delivery:

Five (5) – HIACE Commuter Bus Border Guard 31, Shotemur Str.

Dushanbe, 734025, Tajikistan

Five (5) – HIACE Commuter Bus National Guard 365, Nabiev Str.

Dushanbe, 734036, Tajikistan

Five (5) – HIACE Commuter Bus Drug Control Agency 52, Negmat Karabaeva Str.

Two (2) – HIACE Commuter Bus Ministry of Interior OMON 17 Saadi Sherozi Str.

Dushanbe, 734018, Tajikistan

Two (2) – HIACE Commuter Bus GKNB-Alphas

APPENDIX i: TOYOTA GXL PRADO 4X4 vehicles- tajikistan

Engine

- Engine type: Petrol

- Engine code: 1GR-FE

- Capacity (cc): 3956

- Engine description: Six cylinders, 60 degree V-formation, chain-driven DOHC, four valves per cylinder, alloy block with alloy cross-flow heads.

- Number of cylinders: 6

- Configuration: V

- Head composition: Light alloy

- Variable valve timing: Standard

- Variable valve timing type: Dual Variable Valve Timing with intelligence (VVT-i)

- Valve gear type: DOHC

- Number of valves per cylinder: 4 Fuel

- Fuel type: Premium unleaded

- Fuel type octane: no.95

- Minimum fuel octane number: 95 Drivetrain Driven wheels: 4x4 Four wheel drive type: Full-time Transmission Transmission type: Automatic Number of gears: 5 Transmission description: Automatic Limited slip differential center: Standard Steering Type: Rack & Pinion Disc brakes Number of disc brakes: 4 Number of ventilated disc brakes: 4 Front brake rotor size (mm): 338 x 32 Rear brake rotor size (mm): 312 x 18 Suspension - front Suspension description: Independent, with upper and lower wishbones, coil springs, gas dampers and ball-joint mounted anti-roll bar.

Suspension type: Wishbone Suspension - rear Suspension description: Rigid live axle, five-link system with upper and lower link trailing arms, Panhard rod, coil springs, gas dampers and ball-joint mounted anti-roll bar Suspension type: Beam Tires - front Tire width (mm): 265 Tire profile: 65 Tire rating: S Tires - rear Tire width (mm): 265 Tire profile: 65 Tire rating: S Wheels - front Rim type: Alloy Rim diameter (inch): 17 Rim width (inch): 7.5 Wheels - rear Rim type: Alloy Rim diameter (inch): 17 Rim width (inch): 7.5 Spare wheel - rear spare carrier Spare wheel type: Full-size Rim type: Alloy Spare wheel tire size: 265/65R17 Include a set of BF Goodrich (or equivalent) P265/65R17, Rugged Terrain Tires for each Prado Bumpers - front Color of bumpers: Body color Bumpers - rear Color of bumpers: Body color Headlights Lens type: Complex surface Headlight bulb type: Halogen Front fog lights: Standard Spoiler Roofline: Standard Exterior door handles Exterior door handles color: Body color Roof rails: Standard Step side: Standard Paint Paint type: Gloss White Underbody protection Engine: Standard Seat upholstery Main seat material upgraded: cloth/velour Luxury trim Gear knob trim: Premium Floor covering Floor covering in cabin: Textile Grab handles Number of grab handles: 12 Front seat - driver Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Height adjustment: Standard Height adjustment type: Manual Lumbar adjustment: Standard Lumbar adjustment type: Electric Front seat - passenger Front seat type: Bucket Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Rear seats - front facing Slide adjustment: Standard Slide adjustment type: Manual Recline adjustment: Standard Recline adjustment type: Manual Folding rear seat back: 40/20/40 Head restraints - 3rd row seats Number of headrests: 2 Head restraints - front seats Number of headrests: 2 Head restraints - rear seats Number of headrests: 3 Third row seats - front facing Folding third row seat back: Symmetrical Seating capacity: 2 Fold-away 3rd row seat: Standard Air conditioning Climate control: Standard Climate control type: AUTO Rear air outlet: Standard Climate control number of zones: 3 Rear air conditioner: Standard Ventilation system Digital controls: Standard Power windows front: Standard Power windows rear: Standard Power steering Power steering type: Hydraulic Steering wheel Steering wheel type: Premium Tilting adjustment: Standard Telescopic/reach adjustment: Standard Cruise Control: Standard Trip computer: Standard Door mirrors - driver's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Body color Door mirrors - passenger's side Exterior mirror adjustment type: Electrically adjustable Exterior mirror color: Body color Rear view mirror: Standard Windscreen wipers Intermittent windscreen wipers: Variable Rear window Rear window wipers: Intermittent Headlight control: Standard Main dashboard display Type: Analog Gear position indicator in dash: Standard Tachometer: Standard Low fuel level warning: Standard

Points of Delivery:

One (1) to:

Border Guard 31, Shotemur str.

Dushanbe, 734025, Tajikistan

One (1) to:

National Guard 365, Nabiev str.

Dushanbe, 734036, Tajikistan

One (1) to:

Drug Control Agency 52, Negmat Karabaeva str.

APPENDIX j: TOYOTA HILUX SINGLE CABIN VEHICLES - pakistan

Toyota Hilux Single Cabin Turbo Diesel 4x4, 5 Speed manual transmission, right hand-drive.

External dimensions: Length (mm) 5260, Width (mm) 1835, Height (mm) 1860, Wheelbase (mm) 3085 Weights: Kerb weight (kg) 1920, Gross Vehicle Mass (kg) Cargo area length (mm) 1520 Cargo area width (mm) 1515 Cargo area height (mm) 450 Fuel tank - main - Capacity (L) 76 Fuel type Diesel Engine type Diesel Engine code 1KD-FTV Capacity (cc) 2982 Engine description Four cylinders, in-line, belt-driven DOHC, four valves per cylinder, aluminum alloy head.

Double Overhead Camshafts (DOHC) Double overhead cams (DOHC) operate the engine's valves in a precise and controlled way. This helps increase power and efficiency.

Number of cylinders 4 Configuration In-line Head composition Light alloy Valve gear type DOHC Double Overhead Camshafts (DOHC) Double overhead cams (DOHC) operate the engine's valves in a precise and controlled way. This helps increase power and efficiency Right hand drive Driven wheels 4x4 Four wheel drive type Part-time Transmission type Manual Number of gears 5 transmission description Manual

Color: Pakistan Coast Guards = White Special Services Group (Navy) = Grey

Points of Delivery:

25 to:

Headquarters Pakistan Coast Guards…