43 05 53 - Identification for Process Gas and Liquid Handling Equipment.pdf

43 05 53 - IDENTIFICATION FOR PROCESS GAS AND LIQUID HANDLING EQUIPMENT

Herbert, Rowland & Grubic, Inc. 43 05 53 - 1 005153.0436

SECTION 43 05 53 - IDENTIFICATION FOR PROCESS GAS AND LIQUID HANDLING EQUIPMENT

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Nameplates.

2. Tags.

3. Stencils.

4. Labels.

5. Lockout devices.

B. Related Requirements:

1. Section 43 05 20 - Common Work Results for Liquid Handling Equipment: Basic materials and methods for pumps.

1.2 PREINSTALLATION MEETINGS

A. Convene minimum one week prior to commencing Work of this Section.

1.3 SUBMITTALS

A. Section 01 33 00 - Submittal Procedures: Requirements for submittals.

B. Product Data: Submit manufacturer's catalog literature for each product required.

C. Shop Drawings: Submit list of wording, symbols, letter size, and color coding for equipment identification and schedule, including equipment number, location, function, and manufacturer's name and model number.

D. Samples: Submit two nameplates, labels and tags, for each size used on Project.

E. Manufacturer's Installation Instructions: Indicate installation instructions, special procedures, and installation.

F. Manufacturer's Certificate: Certify that products meet or exceed specified requirements.

G. Qualifications Statement:

1. Submit qualifications for manufacturer.

1.4 MAINTENANCE MATERIAL SUBMITTALS

A. Section 01 73 00 - Execution Requirements: Requirements for maintenance materials.

B. Tools: Furnish special crimpers and other devices required for Owner to reinstall tags.

Herbert, Rowland & Grubic, Inc. 43 05 53 - 2 005153.0436

1.5 QUALITY ASSURANCE

A. Perform Work according to industry standards.

1.6 QUALIFICATIONS

A. Manufacturer: Company specializing in manufacturing products specified in this Section with minimum three years' documented experience.

PART 2 - PRODUCTS

2.1 NAMEPLATES

A. Description: Laminated three-layer plastic with engraved, black letters on light, contrasting background color.

2.2 TAGS

A. Plastic Tags:

1. Description:

a. Laminated three-layer plastic with engraved, black letters on light, contrasting background color.

b. Minimum Tag Size and Configuration: 1-1/2 inch; square.

B. Metal Tags:

1. Description:

a. Stainless-steel construction; stamped letters.

b. Minimum Tag Size and Configuration: 1-1/2 inch; square with finished edges.

C. Information Tags:

1. Description:

a. Clear plastic with printed WARNING and message.

b. Minimum Tag Size: 3-1/4 by 5-5/8 inches.

c. Furnish grommet and self-locking nylon ties.

2.3 STENCILS

A. Description:

1. Clean-cut symbols.

2. Letter Height: 1-3/4 inch.

B. Stencil Paint: As specified in Section 09 90 00 - Painting and Coating; semi-gloss enamel.

2.4 LABELS

A. Description:

1. Laminated Mylar construction.

2. Minimum Size: 1.9 by 0.75 inches.

Herbert, Rowland & Grubic, Inc. 43 05 53 - 3 005153.0436

3. Adhesive backed, with printed identification.

2.5 LOCKOUT DEVICES

A. Lockout Hasps:

1. Description:

a. Reinforced nylon construction.

b. Furnish hasp with erasable label surface.

c. Minimum Size: 7-1/4 by 3 inches.

PART 3 - EXECUTION

3.1 PREPARATION

A. Section 01 73 00 - Execution Requirements: Requirements for installation preparation.

B. Degrease and clean surfaces to receive adhesive for identification materials.

3.2 INSTALLATION

A. Identify equipment with [plastic nameplates] [stencil painting].

B. Identify in-line pumps and other small devices with tags.

C. Identify control panels and major control components outside panels with plastic nameplates.

D. Install identifying devices after completion of coverings and painting.

E. Install plastic nameplates with corrosion-resistant mechanical fasteners or adhesive.

F. Labels:

1. Install labels with sufficient adhesive for permanent adhesion and seal with clear lacquer.

2. For unfinished covering, apply paint primer before applying labels.

G. Install tags using corrosion-resistant chain.

END OF SECTION