10 21 13.pdf

137TH SOW OKLAHOMA ANG B- 3 100% REPAI R BUI LDI NG 1040

OKLAHOMA CI TY, OK 12 SEPTEMBER, 2024

SECTI ON 10 21 13

TOI LET COMPARTMENTS

08/ 20

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ALUMI NUM ASSOCI ATI ON ( AA)

AA DAF45 ( 2003; Reaf f i r med 2009) Desi gnat i on Syst em f or Al umi num Fi ni shes

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2017) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A167 ( 2011) St andar d Speci f i cat i on f or St ai nl ess and Heat - Resi st i ng Chr omi um- Ni ckel St eel Pl at e, Sheet , and St r i p

ASTM A336/ A336M ( 2021) St andar d Speci f i cat i on f or Al l oy St eel For gi ngs f or Pr essur e and Hi gh- Temper at ur e Par t s

ASTM A385/ A385M ( 2022) St andar d Pr act i ce f or Pr ovi di ng Hi gh- Qual i t y Zi nc Coat i ngs ( Hot - Di p)

ASTM B36/ B36M ( 2018) St andar d Speci f i cat i on f or Br ass Pl at e, Sheet , St r i p, and Rol l ed Bar

ASTM B86 ( 2022) St andar d Speci f i cat i on f or Zi nc and Zi nc- Al umi num ( ZA) Al l oy Foundr y and Di e Cast i ngs

ASTM B221 ( 2021) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes

I NTERNATI ONAL CODE COUNCI L ( I CC)

I CC A117. 1 ( 2017) St andar d And Comment ar y Accessi bl e and Usabl e Bui l di ngs and Faci l i t i es

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 286 ( 2024) St andar d Met hods of Fi r e Test s f or Eval uat i ng Cont r i but i on of Wal l and Cei l i ng I nt er i or Fi ni sh t o Room Fi r e Gr owt h

SECTI ON 10 21 13 Page 1

Gallagher, Brad K.

Text Box

ADDENDUM #1 02-17-2025

Gallagher, Brad K.

Cloud

SCI ENTI FI C CERTI FI CATI ON SYSTEMS ( SCS)

SCS SCS Gl obal Ser vi ces ( SCS) I ndoor Advant age

U. S. GENERAL SERVI CES ADMI NI STRATI ON ( GSA)

CI D A- A- 60003 ( Basi c; Not i ce 1) Par t i t i ons, Toi l et , Compl et e

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

UNDERWRI TERS LABORATORI ES ( UL)

UL 2818 ( 2022) GREENGUARD Cer t i f i cat i on Pr ogr am For Chemi cal Emi ssi ons For Bui l di ng Mat er i al s, Fi ni shes And Fur ni shi ngs

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" c l assi f i cat i on.

Submi t t al s not havi ng a " G" c l assi f i cat i on ar e f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Fabr i cat i on Dr awi ngs; G, AE

I nst al l at i on Dr awi ngs; G

SD- 03 Pr oduct Dat a

Cl eani ng and Mai nt enance I nst r uct i ons

Col or s And Fi ni shes

Anchor i ng Devi ces and Fast ener s

Har dwar e and Fi t t i ngs

Br acket s

Door Har dwar e

Pi l ast er Shoes

Fi ni shes; G, AE

Recycl ed cont ent f or sol i d phenol i c par t i t i ons and scr eens; S

Toi l et Encl osur es; G, AE

Ur i nal Scr eens; G, AE

SECTI ON 10 21 13 Page 2

SD- 04 Sampl es

Col or s and Fi ni shes; G

Har dwar e and Fi t t i ngs

Anchor i ng Devi ces and Fast ener s

SD- 07 Cer t i f i cat es

War r ant y

1. 3 CERTI FI CATI ONS

1. 3. 1 I ndoor Ai r Qual i t y

1. 3. 1. 1 Lami nat ed Pl ast i c and Sol i d Phenol i c Pr oduct s

Pr ovi de pr oduct s cer t i f i ed t o meet i ndoor ai r qual i t y r equi r ement s by UL 2818 ( Gr eenguar d) Gol d, SCS Gl obal Ser vi ces I ndoor Advant age Gol d or pr ovi de cer t i f i cat i on or val i dat i on by ot her t hi r d- par t y pr ogr am t hat pr oduct s meet t he r equi r ement s of t hi s Sect i on. Pr ovi de cur r ent pr oduct cer t i f i cat i on document at i on f r om cer t i f i cat i on body.

1. 4 REGULATORY REQUI REMENTS

Compl y wi t h t o I CC A117. 1 code f or access f or t he handi capped oper at i on of t oi l et compar t ment door and har dwar e.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Del i ver mat er i al s i n t he manuf act ur er ' s or i gi nal unopened packages wi t h t he br and, i t em i dent i f i cat i on, and pr oj ect r ef er ence cl ear l y mar ked.

St or e component s i n a dr y l ocat i on t hat i s adequat el y vent i l at ed; f r ee f r om dust , wat er , ot her cont ami nant s, and damage dur i ng del i ver y, st or age, and const r uct i on.

1. 6 WARRANTY

Pr ovi de manuf act ur er ' s war r ant y t o r epai r or r epl ace def ect i ve mat er i al s and wor kmanshi p f or a per i od of 25 year f r om dat e of f i nal accept ance of t he wor k.

PART 2 PRODUCTS

2. 1 SYSTEM REQUI REMENTS

Pr ovi de a compl et e and usabl e t oi l et par t i t i on syst em, i ncl udi ng t oi l et encl osur es, r oom ent r ance scr eens, ur i nal scr eens, syst em of panel s, har dwar e, and suppor t component s. Fur ni sh t he par t i t i on syst em f r om a si ngl e manuf act ur er , wi t h a st andar d pr oduct as shown i n t he most r ecent cat al og dat a. Submi t Fabr i cat i on Dr awi ngs f or t oi l et par t i t i ons and ur i nal scr eens consi st i ng of f abr i cat i on and assembl y det ai l s t o be per f or med i n t he f act or y. Submi t manuf act ur er ' s Cl eani ng and Mai nt enance I nst r uct i ons i n accor dance wi t h Sect i on 01 78 23 OPERATI ONS AND

MAI NTENANCE DATA.

SECTI ON 10 21 13 Page 3

2. 2 MATERI ALS

2. 2. 1 Sol i d Pol yet hyl ene Panel s ( Fi ni sh 5)

Pr ovi de hi gh densi t y pol yet hyl ene ( HDPE) sui t abl e f or exposed appl i cat i on.

Wat er pr oof , non- absor bent and gr af f i t i r esi st ant t ext ur ed sur f ace. HDPE must meet f i r e t est i ng r equi r ement s i n accor dance wi t h NFPA 286.

2. 2. 2 Anchor i ng Devi ces and Fast ener s

Pr ovi de st eel anchor i ng devi ces and f ast ener s hot - di pped gal vani zed af t er f abr i cat i on, i n conf or mance wi t h ASTM A385/ A385M and ASTM A123/ A123M.

Conceal al l gal vani zed anchor i ng devi ces.

2. 2. 3 Br acket s

Pr ovi de t wo- ear panel wal l br acket s, T- st y l e, 1 i nch st ock. Pr ovi de st i r r up st y l e panel - t o- pi l ast er br acket s.

2. 2. 4 Har dwar e and Fi t t i ngs

2. 2. 4. 1 Gener al Requi r ement s

Pr ovi de har dwar e f or t he t oi l et par t i t i on syst em t hat compl i es wi t h CI D A- A- 60003 f or t he speci f i ed t ype and st y l e of par t i t i ons. Pr ovi de har dwar e f i ni sh hi ghl y r esi st ant t o al kal i s, ur i ne, and ot her common t oi l et r oom aci ds. Compl y wi t h 36 CFR 1191 of l at chi ng devi ces and hi nges f or handi cap compar t ment s; pr ovi de chr ome- pl at ed st eel or st ai nl ess st eel devi ces and hi nges wi t h door l at ches t hat oper at e wi t hout ei t her t i ght gr aspi ng or t wi st i ng of t he wr i st of t he oper at or . Submi t t hr ee sampl es of each i t em, i ncl udi ng anchor i ng devi ces and f ast ener s. Appr oved har dwar e sampl es may be i nst al l ed i n t he wor k i f pr oper l y i dent i f i ed.

Mat er i al Conf or mance St andar d

Col d- r ol l ed sheet st eel ASTM A336/ A336M, commer ci al qual i t y

Zi nc- base al l oy ASTM B86, Al l oy AC41- A

Br ass ASTM B36/ B36M, Al l oy C26800

Al umi num ASTM B221

Cor r osi on- r esi st ant st eel ASTM A167, Type 304

2. 2. 4. 2 Fi ni shes

e. Pr ovi de st ai nl ess st eel wi t h a No. 4 f i ni sh.

2. 2. 5 Door Har dwar e

2. 2. 5. 1 Hi nges

Pr ovi de adj ust abl e hi nges t o hol d i n- swi ngi ng door s open at any angl e up t o 90 degr ees and out swi ngi ng door s up t o 10 degr ees. Pr ovi de sel f - l ubr i cat i ng hi nges wi t h t he i ndi cat ed swi ng. Pr ovi de hi nges t hat have t he f ol l owi ng t ype of r et ur n movement :

SECTI ON 10 21 13 Page 4

a. Gr avi t y r et ur n movement

2. 2. 5. 2 Lat ch and Pul l

Pr ovi de l at ch and pul l t hat i s a combi nat i on r ubber - f aced door st r i ke and keeper equi pped wi t h emer gency access. Pr ovi de sur f ace mount ed l at ch.

2. 2. 5. 3 Coat Hooks

Pr ovi de coat hooks t hat ar e combi nat i on uni t s wi t h hooks and r ubber t i pped pi ns.

2. 3 PARTI TI ON PANELS AND DOORS

Fabr i cat e par t i t i on panel s, and pi l ast er s of mat er i al s and const r uct i on l i s t ed:

Pr ovi de pl ast i c ( HDPE) par t i t i on panel s, door s and pi l ast er s not l ess t han 1 i nch t hi ck. Pr ovi de sol i d pol yet hyl ene t oi l et par t i t i ons and ur i nal scr eens wi t h r ecycl ed cont ent of 30 per cent mi ni mum.

2. 3. 1 Toi l et Encl osur es

Pr ovi de t oi l et encl osur es t hat compl y wi t h CI D A- A- 60003, Type I , St y l e C, over head br aced. Fur ni sh wi dt h and l engt h of t oi l et encl osur es as shown.

Door panel hei ght t o be 55 i nches and pi l ast er s t o be 82 i nches hi gh.

Fi ni sh sur f ace of panel s ar e sol i d pol yet hyl ene ( Fi ni sh 5) ; wat er r esi st ant ; gr af f i t i r esi st ant ; non- absor bent r adi us bevel ed edges.

Rei nf or ce panel s i ndi cat ed t o r ecei ve t oi l et paper hol der s or gr ab bar s f or mount i ng of t he i t ems r equi r ed, and pr ovi de cut out s f or t hr ough par t i t i on t oi l et accessor i es. Pr ovi de gr ab bar s t o wi t hst and a bendi ng st r ess, shear st r ess, shear f or ce, and a t ensi l e f or ce i nduced by 250 l bf .

Gr ab bar s cannot r ot at e wi t hi n t hei r f i t t i ngs.

2. 3. 2 Ur i nal Scr eens

Pr ovi de ur i nal scr eens t hat compl y wi t h CI D A- A- 60003, Type I I I , St y l e A, f l oor suppor t ed. Pr ovi de f i ni sh f or sur f ace of scr eens as sol i d pol yet hyl ene ( Fi ni sh 5) ; wat er r esi st ant ; gr af f i t i r esi st ant ;

non- absor bent wi t h r adi us bevel ed edges; wi t h manuf act ur er ' s st andar d post desi gn of mat er i al s mat chi ng t he t hi ckness and const r uct i on of pi l ast er s.

Ur i nal scr eens t o be 18 by 55 i nches. Pr ovi de t hi ckness t o mat ch t oi l et compar t ment panel const r uct i on. Scr eens ar e wal l / pi l ast er suppor t ed.

Fabr i cat e scr eens f r om t he same t ypes of panel s and pi l ast er s as t he t oi l et par t i t i ons. Use cor r osi on- r esi st ant st eel f i t t i ngs and f ast ener s.

2. 4 OVERHEAD- BRACED PARTI TI ONS

Pr ovi de pi l ast er s i n s i zes i ndi cat ed t hat ar e manuf act ur er ' s st andar d cor r osi on- r esi st ant suppor t s, l evel i ng mechani sm, and anchor s at pi l ast er s t o sui t f l oor condi t i ons. Pr ovi de t oi l et encl osur es t hat ar e f l oor mount ed. Pr ovi de shoes at pi l ast er s t o conceal suppor t s and l evel i ng mechani sm. Pr ovi de anchor i ng devi ce at t he bot t om of t he pi l ast er consi st i ng of a channel - shaped f l oor st i r r up f abr i cat ed f r om not l ess t han

0. 0635 i nch t hi ck mat er i al and a l evel i ng bol t . Secur e t he st i r r up t o t he pi l ast er wi t h not l ess t han a 3/ 16 i nch bol t and nut af t er t he pi l ast er i s l evel ed. Secur e t he st i r r up t o t he f l oor wi t h not l ess t han t wo l ead

SECTI ON 10 21 13 Page 5

Gallagher, Brad K.

Text Box

ADDENDUM #1 02-17-2025

Gallagher, Brad K.

Cloud

Gallagher, Brad K.

Cloud

Gallagher, Brad K.

Cloud expansi on shi el ds and sheet met al scr ews. Fabr i cat e over head br ace f r om a cont i nuous ext r uded al umi num t ube not l ess t han 1 i nch wi de by 1- 1/ 2 i nch hi gh, 0. 125 i nch wal l t hi ckness. Fi ni sh i s AA- C22A31 i n accor dance wi t h AA DAF45. Set and secur e br ace i nt o t he t op of each pi l ast er . Pr ovi de shoes at pi l ast er s t o conceal suppor t s and l evel i ng mechani sm.

2. 5 PI LASTER SHOES

Pr ovi de shoes at pi l ast er s t o conceal f l oor - mount ed anchor age. Pr ovi de st ai nl ess st eel pi l ast er shoes. Hei ght i s a mi ni mum 3 i nches.

2. 6 HARDWARE

Pr ovi de har dwar e f or t he t oi l et par t i t i on syst em t hat compl i es wi t h CI D A- A- 60003 f or t he speci f i ed t ype and st y l e of par t i t i ons. Pr ovi de har dwar e pr e- dr i l l ed by manuf act ur er . Use a har dwar e f i ni sh t hat i s hi ghl y r esi st ant t o al kal i s, ur i ne, and ot her common t oi l et r oom aci ds.

Har dwar e i ncl udes: chr ome pl at ed nonf er r ous cast pi vot hi nges, gr avi t y t ype, adj ust abl e f or door c l ose posi t i oni ng; nyl on bear i ngs; chr ome pl at ed al umi num door l at ch; door st r i ke and keeper wi t h r ubber bumper ; and cast al l oy chr ome pl at ed coat hook and bumper , . Pr ovi de l at chi ng devi ces and hi nges f or handi cap compar t ment s compl yi ng wi t h 36 CFR 1191 and st ai nl ess st eel door l at ches t hat oper at e wi t hout ei t her t i ght gr aspi ng or t wi st i ng of t he wr i st of t he oper at or . Use st ai nl ess st eel , t amper pr oof t ype scr ews and bol t s. Wal l mount i ng br acket s ar e cont i nuous, f ul l hei ght , st ai nl ess st eel , i n accor dance wi t h t oi l et compar t ment manuf act ur er ' s i nst r uct i ons. Pr ovi de f l oor - mount ed anchor age consi st i ng of cor r osi on- r esi st ant anchor i ng assembl i es wi t h t hr eaded r ods, l ock washer s, and l evel i ng adj ust ment nut s at pi l ast er s f or st r uct ur al connect i on t o f l oor .

2. 7 COLORS AND FI NI SHES

2. 7. 1 Col or s

Pr ovi de col or as i ndi cat ed i n t he I nt er i or Mat er i al Legend i n t he Dr awi ngs;

col or s l i s t ed ar e not i nt ended t o l i mi t t he sel ect i on of equal col or s f r om ot her manuf act ur er s.

Submi t t hr ee sampl es showi ng col or and a f i ni shed edge on t wo adj acent s i des and cor e const r uct i on, each not l ess t han 12 i nch squar e.

2. 7. 2 Fi ni shes

2. 7. 2. 1 Fi ni shes No. 4, No 4A and No. 5

Pr ovi de manuf act ur er ' s st andar d sol i d pol yet hyl ene ( Fi ni sh 5) f or med under hi gh pr essur e r ender i ng a s i ngl e component sect i on not l ess t han 1 i nch t hi ck. Col or s ext end t hr oughout t he panel t hi ckness.

PART 3 EXECUTI ON

3. 1 PREPARATI ON

Take f i el d measur ement s pr i or t o t he pr epar at i on of dr awi ng and f abr i cat i on t o ensur e pr oper f i t s . Ver i f y t hat f i el d measur ement s, sur f aces, subst r at es and condi t i ons ar e as r equi r ed, and r eady t o r ecei ve wor k. Ver i f y cor r ect spaci ng of pl umbi ng f i xt ur es. Ver i f y cor r ect l ocat i on of bui l t i n f r ami ng, anchor age, and br aci ng. Repor t i n wr i t i ng

SECTI ON 10 21 13 Page 6 t o Cont r act i ng Of f i cer pr evai l i ng condi t i ons t hat adver sel y af f ect sat i sf act or y execut i on of t he wor k of t hi s sect i on. Do not pr oceed wi t h wor k unt i l unsat i sf act or y condi t i ons have been cor r ect ed.

3. 2 I NSTALLATI ON

Do not i nst al l i t ems t hat show vi sual evi dence of bi ol ogi cal gr owt h.

I nst al l par t i t i ons r i gi d, st r ai ght , pl umb, and l evel , wi t h t he panel s cent er ed bet ween t he f i xt ur es. Pr ovi de a panel c l ear ance of not mor e t han 1/ 2 i nch and secur e t he panel s t o wal l s and pi l ast er s wi t h cont i nuous f ul l hei ght wal l br acket s. Locat e wal l br acket s so t hat hol es f or wal l bol t s occur i n masonr y or t i l e j oi nt s. Secur e panel s t o pi l ast er s wi t h br acket s mat chi ng t he wal l br acket s. Pr ovi de f or adj ust ment due t o mi nor f l oor var i at i ons. Locat e head r ai l j oi nt s at pi l ast er cent er l i nes. I nst al l adj acent component s f or consi st ency of l i ne and pl ane. Equi p each door wi t h hi nges, one door l at ch, and one coat hook and bumper . Al i gn har dwar e t o uni f or m cl ear ance at ver t i cal edges of door s.

a. Secur e panel s t o hol l ow pl ast er ed wal l s wi t h t oggl e bol t s usi ng not l ess t han 1/ 4- 20 scr ews of t he l engt h r equi r ed f or t he wal l t hi ckness. Pr ovi de t oggl e bol t s wi t h a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor .

b. Secur e panel s t o cer ami c t i l e on hol l ow pl ast er ed wal l s or hol l ow concr et e- masonr y wal l s wi t h t oggl e bol t s usi ng not l ess t han 1/ 4- 20 scr ews of t he l engt h r equi r ed f or t he wal l t hi ckness. Pr ovi de t oggl e bol t s wi t h a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor .

c. Secur e panel s t o sol i d masonr y or concr et e wi t h l ead or br ass expansi on shi el ds desi gned f or use wi t h not l ess t han 1/ 4- 20 scr ews, wi t h a shi el d l engt h of not l ess t han 1- 1/ 2 i nches. Pr ovi de expansi on shi el ds wi t h a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor .

d. Submi t I nst al l at i on Dr awi ngs f or t oi l et par t i t i ons, r oom ent r ance scr eens, and ur i nal scr eens showi ng pl ans, el evat i ons, det ai l s of const r uct i on, har dwar e, r ei nf or ci ng and bl ocki ng, f i t t i ngs, mount i ngs and escut cheons. I ndi cat e on dr awi ngs t he t ype of par t i t i on, l ocat i on, mount i ng hei ght , cut out s, and r ei nf or cement r equi r ed f or t oi l et - r oom accessor i es.

3. 3 OVERHEAD- BRACED PARTI TI ONS

Secur e pi l ast er s t o t he f l oor wi t h t he anchor age devi ce speci f i ed. Make al l l evel i ng devi ces r eadi l y accessi bl e f or l evel i ng, pl umbi ng, and t i ght eni ng t he i nst al l at i on. Secur e over head br ace t o t he pi l ast er f ace wi t h not l ess t han t wo f ast ener s per f ace. Expansi on shi el ds have a mi ni mum 2 i nch penet r at i on i nt o t he concr et e s l ab. Make t ops of door s par al l el wi t h t he over head br ace when door s ar e i n a c l osed posi t i on.

3. 4 FI NAL ADJUSTMENT

Af t er compl et i on of t he i nst al l at i on, make f i nal adj ust ment s t o t he pi l ast er - l evel i ng devi ces, door har dwar e, and ot her wor ki ng par t s of t he par t i t i on assembl y. Door s have a uni f or m ver t i cal edge cl ear ance of appr oxi mat el y 3/ 16 i nch and r est open at appr oxi mat el y 30 degr ees when unl at ched.

SECTI ON 10 21 13 Page 7

3. 5 CLEANI NG

Touch up baked enamel and powder coat f i ni sh wi t h t he same col or of pai nt t hat was used f or t he f i ni sh. Cl ean al l sur f aces and adj acent sur f aces soi l ed as a r esul t of t he wor k, i n an appr oved manner compl i ant wi t h t he manuf act ur er ' s r ecommended cl eani ng and pr ot ect i on f r om damage pr ocedur es unt i l accept ed. Remove al l equi pment , t ool s, sur pl us mat er i al s, and wor k debr i s f r om t he si t e.

- - End of Sect i on - -

SECTI ON 10 21 13 Page 8