08 81 00.pdf

137TH SOW OKLAHOMA ANG B- 3 100% REPAI R BUI LDI NG 1040

OKLAHOMA CI TY, OK 12 SEPTEMBER, 2024

SECTI ON 08 81 00

GLAZI NG

05/ 19

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

ANSI Z97. 1 ( 2015) Saf et y Gl azi ng Mat er i al s Used i n Bui l di ngs - Saf et y Per f or mance Speci f i cat i ons and Met hods of Test

ASTM I NTERNATI ONAL ( ASTM)

ASTM C509 ( 2006; R 2021) St andar d Speci f i cat i on f or El ast omer i c Cel l ul ar Pr ef or med Gasket and Seal i ng Mat er i al

ASTM C864 ( 2005; R 2015) Dense El ast omer i c Compr essi on Seal Gasket s, Set t i ng Bl ocks, and Spacer s

ASTM C920 ( 2018) St andar d Speci f i cat i on f or El ast omer i c Joi nt Seal ant s

ASTM C1021 ( 2008; R 2014) St andar d Pr act i ce f or Labor at or i es Engaged i n Test i ng of Bui l di ng Seal ant s

ASTM C1036 ( 2021) St andar d Speci f i cat i on f or Fl at Gl ass

ASTM C1048 ( 2018) St andar d Speci f i cat i on f or Heat - St r engt hened and Ful l y Temper ed Fl at Gl ass

ASTM C1087 ( 2016) St andar d Test Met hod f or Det er mi ni ng Compat i bi l i t y of Li qui d- Appl i ed Seal ant s wi t h Accessor i es Used i n St r uct ur al Gl azi ng Syst ems

ASTM C1172 ( 2019) St andar d Speci f i cat i on f or Lami nat ed Ar chi t ect ur al Fl at Gl ass

ASTM C1184 ( 2014) St andar d Speci f i cat i on f or St r uct ur al Si l i cone Seal ant s

ASTM D395 ( 2016; E 2017) St andar d Test Met hods f or Rubber Pr oper t y - Compr essi on Set

ASTM D2287 ( 2019) Nonr i gi d Vi nyl Chl or i de Pol ymer and

SECTI ON 08 81 00 Page 1

Gallagher, Brad K.

Cloud

Gallagher, Brad K.

Text Box

ADDENDUM #1 02-17-2025

Copol ymer Mol di ng and Ext r usi on Compounds

ASTM E1300 ( 2016) St andar d Pr act i ce f or Det er mi ni ng Load Resi st ance of Gl ass i n Bui l di ngs

ASTM E2190 ( 2010) St andar d Speci f i cat i on f or I nsul at i ng Gl ass Uni t Per f or mance and Eval uat i on

GLASS ASSOCI ATI ON OF NORTH AMERI CA ( GANA)

GANA Gl azi ng Manual ( 2008) Gl azi ng Manual

GANA Seal ant Manual ( 2008) Seal ant Manual

GANA St andar ds Manual ( 2008) Engi neer i ng St andar ds Manual

I NSULATI NG GLASS MANUFACTURERS ALLI ANCE ( I GMA)

I GMA TB- 1200 ( 1983; R 2016) Gui del i nes f or I nsul at i ng Gl ass Di mensi onal Tol er ances

I GMA TB- 3001 ( 2001) Gui del i nes f or Sl oped Gl azi ng

I GMA TM- 3000 ( 1990; R 2016) Nor t h Amer i can Gl azi ng Gui del i nes f or Seal ed I nsul at i ng Gl ass Uni t s f or Commer ci al & Resi dent i al Use

NATI ONAL FENESTRATI ON RATI NG COUNCI L ( NFRC)

NFRC 100 ( 2020) Pr ocedur e f or Det er mi ni ng Fenest r at i on Pr oduct U- Fact or s

NFRC 200 ( 2020) Pr ocedur e f or Det er mi ni ng Fenest r at i on Pr oduct Sol ar Heat Gai n Coef f i c i ent and Vi s i bl e Tr ansmi t t ance at Nor mal I nci dence

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 252 ( 2022) St andar d Met hods of Fi r e Test s of Door Assembl i es

NFPA 257 ( 2022) St andar d on Fi r e Test f or Wi ndow and Gl ass Bl ock Assembl i es

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

16 CFR 1201 Saf et y St andar d f or Ar chi t ect ur al Gl azi ng Mat er i al s

1. 2 SUBMI TTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SECTI ON 08 81 00 Page 2

SD- 03 Pr oduct Dat a

I nsul at i ng Gl ass

Gl azi ng Accessor i es

Seal ant s

SD- 04 Sampl es

I nsul at i ng Gl ass

Gl azi ng Compound

Gl azi ng Tape

Seal i ng Tapes

SD- 07 Cer t i f i cat es

I nsul at i ng Gl ass

SD- 08 Manuf act ur er ' s I nst r uct i ons

Set t i ng and Seal i ng Mat er i al s

Gl ass Set t i ng

SD- 11 Cl oseout Submi t t al s

War r ant y f or I nsul at ed Gl ass Uni t s

1. 3 SYSTEM DESCRI PTI ON

Fabr i cat e and i nst al l wat er t i ght and ai r t i ght gl azi ng syst ems t o wi t hst and t her mal movement and wi nd l oadi ng wi t hout gl ass br eakage, gasket f ai l ur e, det er i or at i on of gl azi ng accessor i es, or def ect s i n t he wor k. Gl azed panel s must compl y wi t h t he saf et y st andar ds, i n accor dance wi t h ANSI Z97. 1, and compl y wi t h i ndi cat ed wi nd/ snow l oadi ng i n accor dance wi t h ASTM E1300.

1. 4 QUALI TY CONTROL

Submi t t wo 8 by 10 i nch sampl es of each of t he f ol l owi ng: t i nt ed gl ass, pat t er ned gl ass, heat - absor bi ng gl ass, and i nsul at i ng gl ass uni t s.

Submi t t hr ee sampl es of each ot her mat er i al . Sampl es of pl ast i c sheet s must be mi ni mum 5 by 7 i nches.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Del i ver pr oduct s t o t he s i t e i n unopened cont ai ner s, l abel ed pl ai nl y wi t h manuf act ur er s ' names and br ands. St or e gl ass and set t i ng mat er i al s i n saf e, encl osed dr y l ocat i ons and do not unpack unt i l needed f or i nst al l at i on. Handl e and i nst al l mat er i al s i n a manner t hat wi l l pr ot ect

SECTI ON 08 81 00 Page 3 t hem f r om damage.

1. 6 ENVI RONMENTAL REQUI REMENTS

Do not st ar t gl azi ng wor k unt i l t he out door t emper at ur e i s above 40 degr ees F and r i s i ng, unl ess pr ocedur es r ecommended by t he gl ass manuf act ur er and appr oved by t he Cont r act i ng Of f i cer ar e made t o war m t he gl ass and r abbet sur f aces. Pr ovi de vent i l at i on t o pr event condensat i on of moi st ur e on gl azi ng wor k dur i ng i nst al l at i on. Do not per f or m gl azi ng wor k dur i ng damp or r ai ny weat her .

1. 7 WARRANTY

1. 7. 1 War r ant y f or I nsul at ed Gl ass Uni t s

War r ant y i nsul at i ng gl ass uni t s agai nst devel opment of mat er i al obst r uct i on t o v i s i on ( such as dust , f oggi ng, or f i l m f or mat i on on t he i nner gl ass sur f aces) caused by f ai l ur e of t he her met i c seal , ot her t han t hr ough gl ass br eakage, f or a 10- year per i od f ol l owi ng accept ance of t he wor k. Pr ovi de new uni t s f or any uni t s f ai l i ng t o compl y wi t h t er ms of t hi s war r ant y wi t hi n 45 wor ki ng days af t er r ecei pt of not i ce f r om t he Gover nment .

PART 2 PRODUCTS

2. 1 GLASS

ASTM C1036, unl ess speci f i ed ot her wi se. I n door s and si del i ght s, pr ovi de saf et y gl azi ng mat er i al conf or mi ng t o 16 CFR 1201.

2. 1. 1 Cl ear Gl ass

For i nt er i or gl azi ng ( i . e. , pass and obser vat i on wi ndows) , 1/ 4 i nch t hi ck gl ass shoul d be used.

Type I , Cl ass 1 ( c l ear ) , Qual i t y q3 ( A) . Pr ovi de f or gl azi ng openi ngs not i ndi cat ed or speci f i ed ot her wi se. Use doubl e- st r engt h sheet gl ass or 1/ 8 i nch f l oat gl ass f or openi ngs up t o and i ncl udi ng 15 squar e f eet , 3/ 16 i nch f or gl azi ng openi ngs over 15 squar e f eet but not over 30 squar e f eet , and 1/ 4 i nch f or gl azi ng openi ngs over 30 squar e f eet but not over 45 squar e f eet .

For i nt er i or one- way vi s i on gl azi ng use a dual r ef l ect i ve hi gh per f or mance one- way mi r r or r ef l ect i ve wi ndow f i l m. Fi l m shoul d gi ve a t r ue one- way ef f ect wi t h no si l ver r ef l ect i on f r om t he i nsi de ( CAT Room 132) and no i nt er nal r ef l ect i on.

2. 1. 2 Anneal ed Gl ass

Anneal ed gl ass must be Type I t r anspar ent f l at t ype, Cl ass 1 - c l ear , Qual i t y q3 - gl azi ng sel ect , per cent l i ght t r ansmi t t ance, per cent shadi ng coef f i c i ent , conf or mi ng t o ASTM C1036.

2. 1. 3 Lami nat ed Gl ass

ASTM C1172, Lami nat ed gl ass f abr i cat ed f r om t wo nomi nal 1/ 8 i nch pi eces of Type I , Cl ass 1, Qual i t y Q3. c l ear gl ass conf or mi ng t o ASTM C1036. Fl at gl ass t o be l ami nat ed t oget her wi t h a mi ni mum of 0. 060 i nch t hi ck, c l ear pol yvi nyl but yr al l ami nat e, conf or mi ng t o r equi r ement s of 16 CFR 1201 and

SECTI ON 08 81 00 Page 4

Gallagher, Brad K.

Text Box

ADDENDUM #1 02-17-2025

Gallagher, Brad K.

Cloud

Gallagher, Brad K.

Cloud

ASTM C1172. The t ot al t hi ckness of nomi nal l y 1/ 4 i nches. Col or t o be cl ear .

2. 1. 4 Temper ed Gl ass

ASTM C1048, Ki nd FT ( f ul l y t emper ed) , Condi t i on A ( uncoat ed) , Type I , Cl ass 1 ( t r anspar ent ) , Qual i t y q3, 1/ 4" i nch t hi ck, conf or mi ng t o ASTM C1048 and GANA St andar ds Manual . Col or must be cl ear . Pr ovi de at ext er i or st or ef r ont syst em, and wher ever saf et y gl azi ng mat er i al i s i ndi cat ed or speci f i ed.

2. 1. 5 Fi r e/ Saf et y Rat ed Gl ass

2. 1. 5. 1 Fi r e Pr ot ect i on Rat ed Gl ass

Cl ear t emper ed and meet 16 CFR 1201 Cat egor y I ( under 9 squar e f eet ) or I I ( over 9 squar e f eet ) i mpact saf et y st andar d. Gl ass t o make 45 mi nut e r at i ng when t est ed i n accor dance wi t h NFPA 257 and NFPA 252. Gl ass t o be per manent l y l abel ed wi t h appr opr i at e mar ki ngs.

2. 2 I NSULATI NG GLASS UNI TS

Two panes of gl ass separ at ed by a dehydr at ed ai r space and her met i cal l y seal ed, conf or mi ng t o ASTM E2190. Submi t per f or mance and compl i ance document at i on f or each t ype of i nsul at i ng gl ass.

I nsul at ed gl ass uni t s must have a Sol ar Heat Gai n Coef f i c i ent ( SHGC) maxi mum of 0. 32 det er mi ned accor di ng t o NFRC 200, a 61 vi s i abl e l i ght t r ansmi t t ance, and a Wi nt er Ni ght t i me U- f act or maxi mum of 0. 29 Bt u per squar e f oot by hr by degr ee F i n accor dance wi t h NFRC 100.

Di mensi onal t ol er ances must be as speci f i ed i n I GMA TB- 1200. Spacer must be bl ack, r ol l - f or med, t her mal l y br oken al umi num , wi t h bent or t i ght l y wel ded or keyed and seal ed j oi nt s t o compl et el y seal t he spacer per i pher y and el i mi nat e moi st ur e and hydr ocar bon vapor t r ansmi ssi on i nt o ai r space t hr ough t he cor ner s. Pr i mar y seal must be compr essed pol y i sobut yl ene and t he secondar y seal must be a speci al l y f or mul at ed si l i cone.

The i nner pane must be l ami nat ed gl assASTM C1172. The out er pane must be t emper ed gl ass.

For ext er i or one- way vi s i on gl azi ng use a dual r ef l ect i ve hi gh per f or mance one- way mi r r or r ef l ect i ve wi ndow f i l m. Fi l m shoul d gi ve a t r ue one- way ef f ect wi t h no si l ver r ef l ect i on f r om t he i nsi de and no i nt er nal r ef l ect i on. Fi l m shoul d al l ow 10% vi s i bl e l i ght .

2. 3 SETTI NG AND SEALI NG MATERI ALS

Pr ovi de as speci f i ed i n t he GANA Gl azi ng Manual , I GMA TM- 3000, I GMA TB- 3001, and manuf act ur er ' s r ecommendat i ons, unl ess speci f i ed ot her wi se her ei n. Do not use met al sash put t y, nonski nni ng compounds, nonr esi l i ent pr ef or med seal er s, or i mpr egnat ed pr ef or med gasket s. Mat er i al s exposed t o v i ew and unpai nt ed must be gr ay or neut r al col or . Seal ant t est i ng must be per f or med by a t est i ng agency qual i f i ed accor di ng t o ASTM C1021.

Submi t gl ass manuf act ur er ' s r ecommendat i ons f or set t i ng and seal i ng mat er i al s and f or i nst al l at i on of each t ype of gl azi ng mat er i al speci f i ed.

2. 3. 1 Put t y and Gl azi ng Compound

Pr ovi de gl azi ng compound as r ecommended by manuf act ur er f or f ace- gl azi ng

SECTI ON 08 81 00 Page 5

Gallagher, Brad K.

Text Box

ADDENDUM #1 02-17-2025

Gallagher, Brad K.

Cloud

Gallagher, Brad K.

Cloud met al sash. Put t y must be l i nseed oi l t ype. Do not use put t y and gl azi ng compounds wi t h i nsul at i ng gl ass or l ami nat ed gl ass.

2. 3. 2 Gl azi ng Compound

Use f or f ace gl azi ng met al sash. Do not use wi t h i nsul at i ng gl ass uni t s or l ami nat ed gl ass.

2. 3. 3 Seal ant s

Pr ovi de el ast omer i c seal ant s.

2. 3. 3. 1 El ast omer i c Seal ant

ASTM C920, Type S, Gr ade NS, Cl ass 12. 5, Use G. Use f or channel or st op gl azi ng met al sash. Seal ant s must be chemi cal l y compat i bl e wi t h set t i ng bl ocks, edge bl ocks, and seal i ng t apes. Col or of seal ant must be whi t e.

2. 3. 3. 2 St r uct ur al Seal ant

ASTM C1184, Type S.

2. 3. 4 Seal i ng Tapes

Pr ef or med, semi sol i d, PVC- based mat er i al of pr oper s i ze and compr essi bi l i t y f or t he par t i cul ar condi t i on, compl yi ng wi t h ASTM D2287.

Use onl y wher e gl azi ng r abbet i s desi gned f or t ape and t ape i s r ecommended by t he gl ass or seal ant manuf act ur er . Pr ovi de spacer shi ms f or use wi t h compr essi bl e t apes. Tapes must be chemi cal l y compat i bl e wi t h t he pr oduct bei ng set .

2. 3. 5 Set t i ng Bl ocks and Edge Bl ocks

Cl osed- cel l neopr ene set t i ng bl ocks must be dense ext r uded t ype conf or mi ng t o ASTM C509 and ASTM D395, Met hod B, Shor e A dur omet er bet ween 70 and

90. Edge bl ocki ng must be Shor e A dur omet er of 50 ( pl us or mi nus 5) .

Pr ovi de si l i cone set t i ng bl ocks when bl ocks ar e i n cont act wi t h s i l i cone seal ant . Pr of i l es, l engt hs and l ocat i ons must be as r equi r ed and r ecommended i n wr i t i ng by gl ass manuf act ur er . Bl ock col or must be bl ack.

2. 3. 6 Gl azi ng Gasket s

Gl azi ng gasket s must be ext r uded wi t h cont i nuous i nt egr al l ocki ng pr oj ect i on desi gned t o engage i nt o met al gl ass hol di ng member s t o pr ovi de a wat er t i ght seal dur i ng dynami c l oadi ng, bui l di ng movement s and t her mal movement s. Gl azi ng gasket s f or a s i ngl e gl azed openi ng must be cont i nuous one- pi ece uni t s wi t h f act or y- f abr i cat ed i nj ect i on- mol ded cor ner s f r ee of f l ashi ng and bur r s. Gl azi ng gasket s must be i n l engt hs or uni t s r ecommended by manuf act ur er t o ensur e agai nst pul l - back at cor ner s.

Pr ovi de gl azi ng gasket pr of i l es as r ecommended by t he manuf act ur er f or t he i nt ended appl i cat i on.

2. 3. 6. 1 Fi xed Gl azi ng Gasket s

Fi xed gl azi ng gasket s must be cl osed- cel l ( sponge) smoot h ext r uded compr essi on gasket s of cur ed el ast omer i c v i r gi n neopr ene compounds conf or mi ng t o ASTM C509, Type 2, Opt i on 1.

SECTI ON 08 81 00 Page 6

2. 3. 6. 2 Wedge Gl azi ng Gasket s

Wedge gl azi ng gasket s must be hi gh- qual i t y ext r usi ons of cur ed el ast omer i c v i r gi n neopr ene compounds, ozone r esi st ant , conf or mi ng t o ASTM C864, Opt i on 1, Shor e A dur omet er bet ween 65 and 75.

2. 3. 6. 3 Al umi num Fr ami ng Gl azi ng Gasket s

Gl azi ng gasket s f or al umi num f r ami ng must be per manent , el ast i c, non- shr i nki ng, non- mi gr at i ng, wat er t i ght and weat her t i ght .

2. 3. 7 Accessor i es

Pr ovi de as r equi r ed f or a compl et e i nst al l at i on, i ncl udi ng gl azi ng poi nt s, c l i ps, shi ms, angl es, beads, and spacer st r i ps. Pr ovi de noncor r odi ng met al accessor i es. Pr ovi de pr i mer - seal er s and cl eaner s as r ecommended by t he gl ass and seal ant manuf act ur er s. Use ASTM C1087 t o det er mi ne whet her pr i mi ng and ot her speci f i c j oi nt pr epar at i on t echni ques ar e r equi r ed t o obt ai n r api d, opt i mum adhesi on of gl azi ng seal ant s t o sur f ace.

2. 4 ALUMI NUM PASS- THRU WI NDOWS

2. 4. 1 Bal l Bear i ng Tr ack Assembl y

Pr ovi de compl et e assembl y f or pass- t hr ough wi ndows, i ncl udi ng upper channel , shoes, car r i er s and l ower t r ack, z i nc- pl at ed. Assembl y shal l be f or 1/ 4 i nch t emper ed cl ear gl ass.

2. 4. 2 Lock pr ovi de adj ust abl e l ock f or 1/ 4 i nch sl i di ng gl ass door s wi t h di sc t umbl er , ni ckel pl at ed.

PART 3 EXECUTI ON

Any mat er i al s t hat show vi sual evi dence of bi ol ogi cal gr owt h due t o t he pr esence of moi st ur e must not be i nst al l ed on t he bui l di ng pr oj ect .

3. 1 PREPARATI ON

Pr epar at i on, unl ess ot her wi se speci f i ed or appr oved, must conf or m t o appl i cabl e r ecommendat i ons i n t he GANA Gl azi ng Manual , GANA Seal ant Manual , I GMA TB- 3001, I GMA TM- 3000, and manuf act ur er ' s r ecommendat i ons. Det er mi ne t he si zes t o pr ovi de t he r equi r ed edge cl ear ances by measur i ng t he act ual openi ng t o r ecei ve t he gl ass. Gr i nd smoot h i n t he shop gl ass edges t hat wi l l be exposed i n f i ni sh wor k. Leave l abel s i n pl ace unt i l t he i nst al l at i on i s appr oved, except r emove appl i ed l abel s on heat - absor bi ng gl ass and on i nsul at i ng gl ass uni t s as soon as gl ass i s i nst al l ed.

Secur el y f i x movabl e i t ems or keep i n a c l osed and l ocked posi t i on unt i l gl azi ng compound has t hor oughl y set .

3. 2 GLASS SETTI NG

Shop gl aze or f i el d gl aze i t ems t o be gl azed usi ng gl ass of t he qual i t y and t hi ckness speci f i ed or i ndi cat ed. Gl azi ng, unl ess ot her wi se speci f i ed or appr oved, must conf or m t o appl i cabl e r ecommendat i ons i n t he GANA Gl azi ng Manual , GANA Seal ant Manual , I GMA TB- 3001, I GMA TM- 3000, and manuf act ur er ' s r ecommendat i ons. Al umi num wi ndows, wood door s, and wood wi ndows may be gl azed i n conf or mance wi t h one of t he gl azi ng met hods

SECTI ON 08 81 00 Page 7 descr i bed i n t he st andar ds under whi ch t hey ar e pr oduced, except t hat f ace put t y i ng wi t h no beddi ng wi l l not be per mi t t ed. Handl e and i nst al l gl azi ng mat er i al s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons. Use beads or st ops whi ch ar e f ur ni shed wi t h i t ems t o be gl azed t o secur e t he gl ass i n pl ace. Ver i f y pr oduct s ar e pr oper l y i nst al l ed, connect ed, and adj ust ed.

3. 2. 1 Sheet Gl ass

Cut and set wi t h t he v i s i bl e l i nes or waves hor i zont al .

3. 2. 2 I nsul at i ng Gl ass Uni t s

Do not gr i nd, ni p, or cut edges or cor ner s of uni t s af t er t he uni t s have l ef t t he f act or y. Spr i ngi ng, f or c i ng, or t wi st i ng of uni t s dur i ng set t i ng wi l l not be per mi t t ed. Handl e uni t s so as not t o st r i ke f r ames or ot her obj ect s. I nst al l at i on must conf or m t o appl i cabl e r ecommendat i ons of I GMA TB- 3001 and I GMA TM- 3000.

3. 2. 3 I nst al l at i on of Lami nat ed Gl ass

Sashes whi ch ar e t o r ecei ve l ami nat ed gl ass must be weeped t o t he out si de t o al l ow wat er dr ai nage i nt o t he channel .

3. 3 CLEANI NG

Cl ean gl ass sur f aces and r emove l abel s, pai nt spot s, put t y, and ot her def acement as r equi r ed t o pr event st ai ni ng. Gl ass must be cl ean at t he t i me t he wor k i s accept ed.

3. 4 PROTECTI ON

Pr ot ect gl ass wor k i mmedi at el y af t er i nst al l at i on. I dent i f y gl azed openi ngs wi t h sui t abl e war ni ng t apes, c l ot h or paper f l ags, at t ached wi t h non- st ai ni ng adhesi ves. Pr ot ect r ef l ect i ve gl ass wi t h a pr ot ect i ve mat er i al t o el i mi nat e any cont ami nat i on of t he r ef l ect i ve coat i ng. Pl ace pr ot ect i ve mat er i al f ar enough away f r om t he coat ed gl ass t o al l ow ai r t o c i r cul at e t o r educe heat bui l dup and moi st ur e accumul at i on on t he gl ass.

Upon r emoval , separ at e pr ot ect i ve mat er i al s f or r euse or r ecycl i ng.

Remove and r epl ace gl ass uni t s whi ch ar e br oken, chi pped, cr acked, abr aded, or ot her wi se damaged dur i ng const r uct i on act i v i t i es wi t h new uni t s.

- - End of Sect i on - -

SECTI ON 08 81 00 Page 8

2.3.7 Accessories