24-25 - A6-0 - ENLARGED PLANS AND INTERIOR ELEVATIONS.pdf
PDF 390 KB Posted
- Solicitation number
- RFP260305
- Issued by
- Hart County, Kentucky
About this file
This is a set of architectural construction drawings prepared by the Commonwealth of Kentucky's Finance and Administration Cabinet, Department for Facilities Management, Division of Engineering, for the Gateway Urban Campus Professional Services Classroom Center renovation project located at 438-440 Scott Street in Covington, Kentucky. The drawings document enlarged plans and interior elevations for the renovation scope of work, approved for program concept on January 5, 2016. The document contains thirty-one detailed design sheets at various scales (ranging from 3/8" = 1'-0" to 3/4" = 1'-0") showing specifications for multiple functional areas including a vending area, dispensary, office, hair wash stations, and massage therapy rooms with clinical laboratory space.
The design specifications detail the installation and materials for casework, countertops, shelving, and fixtures throughout the facility. Materials specified include solid surface countertops with stainless steel edge protection (Schulter Quadel basis of design), plastic laminate countertops and casework, TAC-WALL systems by Walltalkers wall coverings, built-in wood shelving with mitered edges, ceramic tile flooring, stainless steel sinks with eyewash stations, and various wall types including moisture-resistant gypsum board and brick finishes. The drawings reference mechanical, electrical, and plumbing (MEP) drawings for fixture schedules and ductwork integration. The record drawings, marked as as-built with revisions dated December 18, 2015, note that the architect/engineer did not independently verify all information and shall not be responsible for errors resulting from information provided by others.
View the file
Other files
Show 40 more
Latest 50 of 80 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W D
RB-1
EXISTING CEILING
JOIST ABOVE, PT-??
EXISTING WALL, PT-??
BASIS OF DESIGN:
TAC-WALL BY
WALLTALKERS
(ENTIRE WALL
SURFACE) THIS SIDE
ONLY
SEALED CONCRETE
FLOOR TOPPING
OPEN TO
VENDING
AREA
3' - 2"
MICROWAVE, N.I.C.
SS-1
VENDING AREA
A6.0
3' - 0"
3' - 2"
SS-1
PL-1
FILLER
PANEL
B
A6.0
A6.0
A6.0
A6.0
WALL TYPE 906 BELOW COUNTERTOP
SMALL DASHED LINE REPRESENTS LOCATION
OF GLASS TILE MOSAIC (GT-2)
2" DIA. GROMMETS (MIN. 4)
EQUALLY SPACED
METAL COUNTER
SUPPORTS, REFER TO
SPECIFICATION, QTY AS
RECOMMENDED BY
COUNTERTOP MFR.
2" THICK SOLID SURFACE
COUNTERTOP WITH 1"
THICK APRON
N.I.C
R
' - 0
/4
/4
1' - 6 1/2"
8' - 10 1/4"
' - 6
STAINLESS STEEL EDGE PROTECTION
BASIS OF DESIGN: SCHULTER QUADEL
A6.0
2" THICK SOLID
SURFACE COUNTERTOP
WITH 1" THK APRON
GT-2 OVER WALL TYPE 906
1"
2' - 6"
2" DIA.
GROMMET
METAL
COUNTER
SUPPORT
SOLID SURFACE
COUNTER
GT-2
/2
/2
/2
1' - 0" 10' - 0"
2' - 6" 10' - 0"
4' - 6" 10' - 0"
9A
A6.0
103 102
/4
2" 2"
E Q
E Q
E Q
E Q
E
Q
PTD SALVAGED WOOD BASE
4' - 8 3/4" 5' - 3 5/8"
ROUND MECHANICAL DUCTWORK
REFER TO MEP DRAWINGS
REFER TO DETAIL
3/A2,1
3/4" CLEAR STAIN GRADE WOOD
BUILT-IN SHELVES WITH MITERED
EDGES AND CORNERS, FINISH TO
BE CHOSEN BY ARCHITECT
E
A6.0
F
IE
L D
V E
R
IF
Y
EPOXY
COUNTERTOP
AND BACK/END
SPLASH
UNDERMOUNT
STAINLESS STL
SINK AND EYEWASH
REFER TO MEP
FOR FIXTURE
SCHEDULE
2' - 1"
ADHERE 5/8"
MOISTURE
RESISTANT
GYPSUM BOARD
DIRECTLY TO
BRICK FACE
CHASE
FOR MEP
DISPENSARY
2' - 0" 2' - 0" 2' - 0"
2' - 0" 2' - 0"
FIELD VERIFY
PLAM
CT-4b
PLAM
S.S. SINK
W/ EYEWASH
EPOXY
COUNTER
PANEL
INFILL, TYP.
A6.0
N .I .C
N
.I .C
PLASTIC
LAMINATE
COUNTERTOP
SURFACE
MOUNTED
STAINLESS
STEEL
SINK, REFER
TO MEP DWGS
FOR FIXTURE
SCHEDULE
F
IE
L D
V E
R
IF
Y
N.I.C. N.I.C.
2' - 0" 2' - 0" 2' - 0" 1' - 9" 1' - 9" 1' - 3"
2' - 0" 2' - 0" 2' - 0"
PLAM
PLAM
PLAM
S.S. SINK
PANEL
INFILL,
TYP.
PANEL
INFILL,
TYP.
A6.0
906A
906A
906A
906A
OFFICE 2
C
BUILT-IN
WOOD
SHELVING
A6.0
SOLID SURFACE
COUNTERTOP
/2
/2
WALL
MOUNTED
HAIR WASH
STATIONS
E Q
E
Q
BUILT-IN PLAM OPEN
SHELVES, COORDINATE
WITH WINDOW/TRIM
CONSTRUCTION
WOOD BASEBOARD (MATCH EXISTING)
A6.0
/2
/2
/2
/2
T A
L L
SOLID SURFACE COUNTER
AND APRON
PLAM-FACED WALL
14' - 8"
5 1/2" 7' - 2 1/2" 5 1/2" 6' - 4 1/2"
BASIS OF DESIGN:
TAC-WALL BY WALL
TALKERS
(WALL TO WALL,
BASE TO CEILING)
WOOD BASE TO
MATCH EXISTING
NEW PILASTER
A6.0
2' - 0" 2' - 0" 2' - 0" 2' - 0"
906A
SURFACE MOUNT
STAINLESS STEEL
SINK, REFER TO
MEP DWGS FOR
FIXTURE SCHEDULE
PLASTIC LAMINATE
COUNTERTOP AND
CASEWORK
FACIAL / COUPLE
MASSAGE
2' - 0"2' - 0"2' - 0"2' - 0"
2' - 0" 2' - 0" 2' - 0" 2' - 0"
1" PANEL
INFILL
UNDER
CABINET
LED LIGHTS
CERAMIC
TILE
S.S. SINK
PLAM
PLAM
1" PANEL
INFILL 2
2" WOOD TRIM
WASHER
DRYER
N.I.C.
PLAM COUNTER
ON TOP OF WALL
F
IX
E D
S H
E L V
E S
/2
O P
E N
C O
U N
T E
R T
O P
1' - 3"
1' - 4"
SOLID
SURFACE
COUNTER
ON TOP OF
WALL
BUILT-IN
WOOD
SHELVES
PLAM
FACED
GWB
/2
1"
/8
6" 5/8"
6" METAL STUD
BRACING
SOLID MINERAL
PROFILE TILE:
16"x16"x1" . BASIS
OF DESIGN:
MODULAR ARTS, INC.,
"WADE"
WOOD BASE, PAINT
MATCH EXISTING
BLOCKING BEHIND
A6.0
A6.0
2' - 0"
FIT ANGLE
CUSTOM TO
CLIENT MASSAGE
301C
PLAM
S.S. SINK
PLAM
PANEL
INFILL
TYP.
2' - 0" 1' - 9"
S.S. SINK
PLAM
INFILL
PANEL
CLIENT MASSAGE
301D
CLIENT MASSAGE
301E
2' - 6" 2' - 0"
S.S. SINK
PLAM
PLAM
PANEL
INFILL
MASSAGE
CLINICAL LAB
1' - 0" 2' - 0"
S.S. SINK
PLAM
PLAM
INFILL
PANEL
TYP.
A6.0
F
IN
IS
H
E D
D
IM
E N
S
IO
N
906 906A
906A
906A
906A
906A
SURFACE MOUNT
STAINLESS STEEL
SINK, REFER TO
MEP DWGS FOR
FIXTURE SCHEDULE
PLASTIC LAMINATE
COUNTERTOP AND
CASEWORK
2' - 1"
CLIENT MASSAGE
301C
M
IN
A6.0
SURFACE MOUNT
STAINLESS STEEL
SINK, REFER TO
MEP DWGS FOR
FIXTURE SCHEDULE
PLASTIC LAMINATE
COUNTERTOP AND
CASEWORK
CLIENT MASSAGE
301D
2' - 1"
M
IN
A6.0
906A
923A
2' - 1"
SURFACE MOUNT
STAINLESS STEEL
SINK, REFER TO
MEP DWGS FOR
FIXTURE SCHEDULE
PLASTIC LAMINATE
COUNTERTOP AND
CASEWORK
CLIENT MASSAGE
301E
A6.0
MASSAGE
CLINICAL LAB
906A
906A906A
SURFACE MOUNT
STAINLESS STEEL
SINK, REFER TO
MEP DWGS FOR
FIXTURE SCHEDULE
PLASTIC LAMINATE
COUNTERTOP AND
CASEWORK 2' - 1"
1' - 0"1/2" CLEAR STAIN
GRADE WOOD
WRAP WITH
MITERED EDGES
OVER 2x4 WOOD
FRAME SECURED
TO EXISTING WALL
FINISH TO BE
DETERMINED BY
ARCHITECT
/2
/2
C
COMMONWEALTH
T
R E
R
A
H C
I
N K
E
UT
OF
B
3 87
I
R E
G
No.
TS E
NT U
C E
YK T
N E R
D
ER
RB
APPROVED FOR PROGRAM CONCEPT ONLY
APPROVED FOR PROGRAM CONCEPT ONLY
DATE
DATE
ENGINEERING
DIVISION OF
AGENCY
AUTHORIZED AGENT
FOR INTENT ONLY
DIV. OF ENGR.
REVIEWED
ENGR. ACCT. NO.
DRAWING NO.
DATE
A&E FILE NO.
CHECKED BY
SHEET DRAWN BY
RECORD DATE
DATEREVISIONS
COMMONWEALTH OF KENTUCKY
FINANCE AND ADMINISTRATION CABINET
DEPARTMENT FOR FACILITIES MANAGEMENT
DIVISION OF ENGINEERING
FRANKFORT, KENTUCKY
/5
/2
:5 :1
P
M C
U s e rs
\R H in s o n \D o c u m e n ts
\1
G
C T
C
A b o d e B u il d in g R e n o v a ti o n rh in s o n .r v t
A6.0
ENLARGED PLANS AND INTERIOR
ELEVATIONS
470-C5N5-NC11-01
GATEWAY URBAN CAMPUS
09/25/14
201114.02
BB
REH
PROFESSIONAL SERVICES CLASSROOM CENTER
438-440 Scott St., Covington, KY 41011
SCALE: 3/8" = 1'-0"A6.0
1 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
3 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
2 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
4 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
6 CASEWORK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
7 CASEWORK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
5 CASEWORK ELEVATION
SCALE: 3/4" = 1'-0"A6.0
8 CASEWORK SECTION
SCALE: 3/8" = 1'-0"A6.0
9 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
10 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
DISPENSARY ENLARGED
PLAN
SCALE: 3/8" = 1'-0"A6.0
DISPENSARY CASEWORK
ELEVATION
SCALE: 3/8" = 1'-0"A6.0
13 ENLARGED DETAIL
SCALE: 3/8" = 1'-0"A6.0
14 CASEWORK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
15 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
17 CASEWORK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
18 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
19 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
20 CASEWORK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
16 SECTION
SCALE: 3/4" = 1'-0"A6.0
21 INT. ELEVATION
SCALE: 3/4" = 1'-0"A6.0
22 SECTION DETAIL
SCALE: 3/8" = 1'-0"A6.0
23 INTERIOR ELEVATION
SCALE: 3/8" = 1'-0"A6.0
29 CSWK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
27 CSWK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
31 CSWK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
25 CSWK ELEVATION
SCALE: 3/8" = 1'-0"A6.0
28 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
26 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
30 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
24 ENLARGED PLAN
SCALE: 3/8" = 1'-0"A6.0
9A ENLARGED SECTION
AS-BUILT
12-18-15
RECORD DRAWINGS
THESE RECORD DRAWINGS HAVE BEEN PREPARED IN PART, ON THE BASIS OF INFORMATION COMPILED BY OTHERS. THE ARCHITECT/ENGINEER HAS NOT VERIFIED THE ACCURACY OR COMPLETENESS OF THE INFORMATION, AND SHALL NOT BE RESPONSIBLE FOR ANY ERRORS OR OMISSIONS THAT MAY BE
INCORPORATED AS A RESULT OF ERRONEOUS INFORMATION PROVIDED BY OTHERS.
File details come from the government source that posted it. Updated .