10 21 13 - Toilet Compartments.pdf

10 21 13 – TOILET COMPARTMENTS

Herbert, Rowland & Grubic, Inc. 10 21 13 - 1 000483.0450

SECTION 10 21 13 – TOILET COMPARTMENTS

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Metal toilet compartments.

B. Related Requirements:

1. Section 10 28 00 – Toilet, Bath, and Laundry Accessories.

1.2 REFERENCE STANDARDS

A. ASTM International:

1. ASTM A653 - Standard Specification for Steel Sheet, Zinc Coated (Galvanized) or

Zinc Iron Alloy Coated (Galvannealed) by the Hot Dip Process.

2. ASTM A666 - Standard Specification for Annealed or Cold-Worked Austenitic

Stainless Steel Sheet, Strip, Plate, and Flat Bar.

1.3 COORDINATION

A. Section 01 31 13 – Project Coordination: Requirements for coordination.

B. Coordinate Work with placement of support framing and anchors in wall.

1.4 SUBMITTALS

A. Section 01 33 00 – Submittal Procedures: Requirements for submittals.

B. Product Data: Submit data on panel construction, hardware, accessories, and available colors.

C. Shop Drawings: Indicate partition plan, elevation views, dimensions, door swings, details of wall and floor supports, and anchorage types.

D. Manufacturer's Instructions: Submit special procedures, and perimeter conditions requiring special attention.

E. Field Quality-Control Submittals: Indicate results of Contractor-furnished tests and inspections.

1.5 MAINTENANCE MATERIAL SUBMITTALS

A. Section 01 73 00 – Execution Requirements: Requirements for maintenance materials.

B. Spare Parts:

1. Furnish one set of manufacturer's recommended spare parts.

C. Tools: Furnish special wrenches and other devices required for Owner to maintain panels

Herbert, Rowland & Grubic, Inc. 10 21 13 - 2 000483.0450 and hardware.

1.6 EXISTING CONDITIONS

A. Field Measurements: Verify field measurements prior to fabrication. Indicate field measurements on Shop Drawings.

1.7 WARRANTY

A. Section 01 78 36 – Warranty Requirements specifies requirements for warranties.

B. Furnish five-year manufacturer's warranty for powder-coat finishes.

PART 2 - PRODUCTS

2.1 METAL TOILET COMPARTMENTS

A. Manufacturers:

1. All American Metal Corp., Bradley Corp., General Partitions Mfg., or equal.

B. Toilet Compartments: baked enameled, floor mounted, head rail braced.

C. Doors, Panels, and Pilasters: Sheet steel faces, pressure bonded to sound-deadening core, formed and closed edges, mitered and welded corners ground smooth.

1. Panel and Door Faces: 22 gage.

2. Pilaster Faces: 18 gage.

3. Reinforcement: 12 gage.

4. Internal Reinforcement: Furnish in areas of attached hardware and fittings. Mark locations of reinforcement for partition-mounted washroom accessories.

D. Door and Panel Dimensions:

1. Thickness: 1 in.

2. Door Width: 32 in., out swinging.

3. Height: 58 in.

E. Pilasters: 1-1/4 in thick, of sizes required to suit compartment width and spacing.

2.2 MATERIALS

A. Steel Sheet: ASTM A653, with G90 zinc coating.

2.3 FINISHES

A. Powder-Coated Enamel Steel Compartments: Cleaned, degreased, and neutralized, followed immediately with phosphatizing treatment, prime coat, and two finish coats of electrostatically applied baked enamel.

B. Color: Single color as selected by Owner

Herbert, Rowland & Grubic, Inc. 10 21 13 - 3 000483.0450

2.4 ACCESSORIES

A. Pilaster Shoes:

1. Formed ASTM A666, Type 304 stainless steel with No. 4 finish, concealing floor fastenings.

2. Provide adjustment for floor variations with screw jack through steel saddles integral with pilaster.

B. Head Rails: Hollow anodized aluminum tube, 1 x 1-5/8 in size, with cast socket wall brackets.

C. Brackets:

1. Polished chrome-plated, non-ferrous cast metal

D. Attachments, Screws, and Bolts: Stainless steel, tamper-proof type.

1. For Attaching Panels and Pilasters to Brackets: Through-bolts and nuts, tamper-proof.

E. Hardware: Chrome-plated, non-ferrous cast metal.

1. Self closing, pivot hinges, gravity type, adjustable for door close positioning; two for each door.

2. Nylon bearings.

3. Thumb-turn door latch with exterior emergency access feature.

4. Paddle-style door latch for accessible compartments.

5. Door strike and keeper with rubber bumper; mounted on pilaster in alignment with door latch.

6. Coat hook with rubber bumper; one for each compartment, mounted on door.

7. Furnish door pull for out-swinging doors.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Section 01 73 00 – Execution Requirements: Requirements for installation examination.

B. Verify field measurements are as indicated on Shop Drawings.

C. Verify correct spacing of and between plumbing fixtures.

D. Verify correct location of built-in framing, anchorage, and bracing.

3.2 INSTALLATION

A. Maintain maximum of 1/2 in space between panels and pilasters, and 1 in between panels and walls.

B. Attach panel brackets securely to walls using anchor and expansion devices appropriate to wall materials.

C. Attach panels and pilasters to brackets using two brackets per panel. Align bracket

Herbert, Rowland & Grubic, Inc. 10 21 13 - 4 000483.0450 locations to greatest extent possible. Locate head rail joints at pilaster center lines.

3.3 ERECTION TOLERANCES

A. Section 01 40 00 – Quality Requirements: Requirements for tolerances.

3.4 FIELD QUALITY CONTROL

A. Section 01 40 00 – Quality Requirements: Requirements for inspecting and testing.

B. Review proposed field touch-up of scratches or damaged finish with Engineer prior to initiating repair. Where conditionally approved, use manufacturer-provided repair materials and procedures. Replace all unacceptable field-repaired finishes with new materials.

3.5 ADJUSTING

A. Section 01 73 00 – Execution Requirements: Requirements for testing and adjusting.

B. Adjust and align hardware to uniform clearance at vertical edge of doors, not exceeding 1/8 in.

C. Adjust hinges to position doors in partially opened position when unlatched. Return out swinging doors to closed position.

D. Adjust adjacent components for consistency of line or plane.

3.6 CLEANING

A. Section 01 73 00 – Execution Requirements: Requirements for cleaning.

B. Clean partition and screen surfaces with materials and cleansers according to manufacturer's recommendations.

END OF SECTION 10 21 13