01 42 00 - References.pdf

01 42 00 – REFERENCES

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 1 009280.0426

SECTION 01 42 00 – REFERENCES

PART 1 - GENERAL

1.01 REFERENCE STANDARDS AND SPECIFICATIONS

A. Standards and other publications referenced to these Specifications shall be of the issues in effect on date for receiving bids and shall form a part of this Contract.

B. Should specified reference standards conflict with Contract Documents; request clarifica-tion from Engineer before proceeding.

C. The contractual relationship of the parties to the Contract shall not be altered from the Contract Documents by mention or inference otherwise in any reference documents.

1.02 DEFINITIONS

A. General: Basic Contract definitions are included in the Conditions of the Contract.

B. "Approved": When used to convey Engineer's action on Contractor's submittals, applications, and requests, "approved" is limited to Engineer's duties and responsibilities as stated in the Conditions of the Contract.

C. "Directed": A command or instruction by Engineer. Other terms including "requested,"

"authorized," "selected," "approved," "required," and "permitted" have the same meaning as "directed."

D. "Indicated": Requirements expressed by graphic representations or in written form on

Drawings, in Specifications, and in other Contract Documents. Other terms including "shown," "noted," "scheduled," and "specified" have the same meaning as "indicated."

E. "Regulations": Laws, ordinances, statutes, and lawful orders issued by authorities having jurisdiction, and rules, conventions, and agreements within the construction industry that control performance of the Work.

F. "Project Site": Space available for performing construction activities. The extent of

Project site is shown on Drawings and may or may not be identical with the description of the land on which Project is to be built.

1.03 INDUSTRY STANDARDS

A. Applicability of Standards: Unless the Contract Documents include more stringent requirements, applicable construction industry standards have the same force and effect as if bound or copied directly into the Contract Documents to the extent referenced. Such standards are made a part of the Contract Documents by reference.

B. Publication Dates: Comply with standards in effect as of date of the Contract Documents, unless otherwise indicated.

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 2 009280.0426

C. Copies of Standards: Each entity engaged in construction on Project should be familiar with industry standards applicable to its construction activity. Copies of applicable standards are not bound with the Contract Documents.

1. Where copies of standards are needed to perform a required construction activity, obtain copies directly from publication source.

D. Abbreviations and Acronyms for Standards and Regulations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the standards and regulations in the following list.

ADAAG Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities CFR Code of Federal Regulations CRD Handbook for Concrete and Cement FED-STD Federal Standard FS Federal Specification FTMS Federal Test Method Standard UFAS Uniform Federal Accessibility Standards

1.04 ABBREVIATIONS AND ACRONYMS

A. Industry Organizations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the following list.

AA Aluminum Association, Inc. (The) AAADM American Association of Automatic Door Manufacturers AABC Associated Air Balance Council AAMA American Architectural Manufacturers Association AASHTO American Association of State Highway and Transportation Officials ABMA American Bearing Manufacturers Association ACI ACI International (American Concrete Institute) ACPA American Concrete Pipe Association AEIC Association of Edison Illuminating Companies, Inc. (The) AFPA American Forest & Paper Association AGA American Gas Association AGC Associated General Contractors of America (The) AHA American Hardboard Association AI Asphalt Institute AISC American Institute of Steel Construction AISI American Iron and Steel Institute AITC American Institute of Timber Construction ALCA Associated Landscape Contractors of America

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 3 009280.0426

ALSC American Lumber Standard Committee, Incorporated AMCA Air Movement and Control Association International, Inc.

ANSI American National Standards Institute AOSA Association of Official Seed Analysts APA APA - The Engineered Wood Association APA Architectural Precast Association API American Petroleum Institute ARI Air-Conditioning & Refrigeration Institute ARMA Asphalt Roofing Manufacturers Association ASCE American Society of Civil Engineers

ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engi-neers

ASME American Society of Mechanical Engineers International ASSE American Society of Sanitary Engineering ASTM American Society for Testing and Materials International AWCI Association of the Wall and Ceiling Industries International AWCMA American Window Covering Manufacturers Association AWI Architectural Woodwork Institute AWPA American Wood-Preservers' Association AWS American Welding Society AWWA American Water Works Association BHMA Builders Hardware Manufacturers Association BIA Brick Industry Association (The)

BIFMA (Business and Institutional Furniture Manufacturer's Association Inter-national)

CCFSS Center for Cold-Formed Steel Structures CDA Copper Development Association Inc.

CGA Compressed Gas Association CIMA Cellulose Insulation Manufacturers Association CISCA Ceilings & Interior Systems Construction Association CISPI Cast Iron Soil Pipe Institute CLFMI Chain Link Fence Manufacturers Institute CPPA Corrugated Polyethylene Pipe Association CRSI Concrete Reinforcing Steel Institute CSA CSA International (Formerly: IAS - International Approval Services) CSI Construction Specifications Institute (The) DHI Door and Hardware Institute EIA Electronic Industries Alliance EIMA EIFS Industry Members Association EJCDC Engineers Joint Contract Documents Committee EJMA Expansion Joint Manufacturers Association, Inc.

ESD ESD Association

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 4 009280.0426

FCI Fluid Controls Institute FM Factory Mutual System FMG FM Global (Formerly: FM - Factory Mutual System) FSA Fluid Sealing Association FSC Forest Stewardship Council GA Gypsum Association GANA Glass Association of North America GRI Geosynthetic Research Institute GS Green Seal GSI Geosynthetic Institute HI Hydraulic Institute HMMA Hollow Metal Manufacturers Association HPVA Hardwood Plywood & Veneer Association HPW H. P. White Laboratory, Inc.

IAS International Approval Services ICEA Insulated Cable Engineers Association, Inc.

ICRI International Concrete Repair Institute, Inc.

IEC International Electrotechnical Commission IEEE Institute of Electrical and Electronics Engineers, Inc. (The) IESNA Illuminating Engineering Society of North America IGCC Insulating Glass Certification Council IGMA Insulating Glass Manufacturers Alliance (The) ILI Indiana Limestone Institute of America, Inc.

ISO International Organization for Standardization ISSFA International Solid Surface Fabricators Association ITU International Telecommunication Union KCMA Kitchen Cabinet Manufacturers Association LMA Laminating Materials Association LPI Lightning Protection Institute MBMA Metal Building Manufacturers Association MFMA Maple Flooring Manufacturers Association MFMA Metal Framing Manufacturers Association MHIA Material Handling Industry of America MPI Master Painters Institute

MSS Manufacturers Standardization Society of The Valve and Fittings Indus-try Inc.

NAAMM National Association of Architectural Metal Manufacturers NACE (National Association of Corrosion Engineers International) NAIMA North American Insulation Manufacturers Association (The) NCMA National Concrete Masonry Association NCPI National Clay Pipe Institute NCTA National Cable & Telecommunications Association

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 5 009280.0426

NEBB National Environmental Balancing Bureau NECA National Electrical Contractors Association NeLMA Northeastern Lumber Manufacturers' Association NEMA National Electrical Manufacturers Association NETA InterNational Electrical Testing Association NFHS National Federation of State High School Associations

NFPA NFPA

NFRC National Fenestration Rating Council NGA National Glass Association NHLA National Hardwood Lumber Association NLGA National Lumber Grades Authority NRCA National Roofing Contractors Association NRMCA National Ready Mixed Concrete Association NSF NSF International NSSGA National Stone, Sand & Gravel Association NTMA National Terrazzo & Mosaic Association, Inc.

NTRMA National Tile Roofing Manufacturers Association NWWDA National Wood Window and Door Association PCI Precast/Prestressed Concrete Institute PDCA Painting & Decorating Contractors of America PDI Plumbing & Drainage Institute PGI PVC Geomembrane Institute PTI Post-Tensioning Institute RCSC Research Council on Structural Connections RFCI Resilient Floor Covering Institute

RTI Roof Tile Institute (Formerly: National Tile Roofing Manufacturers As-sociation)

SAE SAE International SDI Steel Deck Institute SDI Steel Door Institute SEFA Scientific Equipment and Furniture Association SGCC Safety Glazing Certification Council SIA Security Industry Association SIGMA Sealed Insulating Glass Manufacturers Association SJI Steel Joist Institute SMA Screen Manufacturers Association SMACNA Sheet Metal and Air Conditioning Contractors' National Association SPFA Spray Polyurethane Foam Alliance

SPI/SPFD Society of the Plastics Industry, Inc. (The) Spray Polyurethane Foam Di-vision

SPIB Southern Pine Inspection Bureau (The) SPRI (Single Ply Roofing Institute)

Herbert, Rowland, & Grubic, Inc. 01 42 00 - 6 009280.0426

SSINA Specialty Steel Industry of North America SSPC SSPC: The Society for Protective Coatings STI Steel Tank Institute SWI Steel Window Institute SWRI Sealant, Waterproofing, & Restoration Institute TCA Tile Council of America, Inc.

TIA/EIA Telecommunications Industry Association/Electronic Industries Alli-ance

TMS The Masonry Society TPI Truss Plate Institute, Inc.

TPI Turfgrass Producers International UL Underwriters Laboratories Inc.

UNI Uni-Bell PVC Pipe Association USGBC U.S. Green Building Council WASTEC Waste Equipment Technology Association WDMA Window & Door Manufacturers Association WMMPA Wood Moulding & Millwork Producers Association

B. Code Agencies: Where abbreviations and acronyms are used in Specifications or other

Contract Documents, they shall mean the recognized name of the entities in the following list.

C. Government Agencies: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the following list.

PART 2 – PRODUCTS – Not Used

PART 3 – EXECUTION – Not used.

END OF SECTION 01 42 00

BOCA BOCA International, Inc. (See ICC) CABO Council of American Building Officials (see ICC) IAPMO International Association of Plumbing and Mechanical Officials ICBO International Conference of Building Officials ICC International Code Council (Formerly CABO)

NIST National Institute of Standards and Technology OSHA Occupational Safety & Health Administration

PENNDOT

or PaDOT Pennsylvania Department of Transportation

PADEP or

DEP

Pennsylvania Department of Environmental Protection