Project 4_Attachment 0008 Scopes_07 Apr 2026.pdf

Project #4: MDC-PAC Modular SCIF

Project Title: MDC-PAC Modular SCIF

1.0 DESCRIPTION OF WORK

Provide all plant, labor, tools, equipment, and materials to perform all work in strict accordance with the specificaƟons and plans required for the project. The Contractor shall accomplish all items of work needed to provide a complete and usable SCIF-in-a-Box (SIAB) system. All work must adhere to the applicable drawings, specificaƟons, and relevant naƟonal, state, and local codes and standards.

2.0 AREA DESCRIPTION

The work will occur at the designated project site at Joint Base Lewis-McChord. The Contractor is responsible for verifying all site condiƟons, including the availability of electrical and communicaƟon services at the designated Ɵe-in points.

3.0 PRINCIPAL ITEMS TO BE ACCOMPLISHED

3.1 Site Work and FoundaƟon

Concrete Pad InstallaƟon:

Excavate and prepare the site for a new concrete pad at the locaƟon of the new

SCIF in a box.

Prepare the subgrade and install a crushed aggregate base course, compacted to

95% standard density. The contractor shall provide a compacƟon test as a submiƩal.

Pour a new 6” thick, 4,000 psi Portland cement concrete pad. The pad shall have a 1” chamfer on all edges and extend 4” above the surrounding grade. Concrete pad requirements may change based on requirements of the SCIF in a box.

The concrete pad shall have a thickened edge extending 12” below grade. Both the pad and thickened edge shall be reinforced with #4 rebar at 12” O.C. in each direcƟon.

The contractor shall provide a concrete mix design submiƩal and the 28-day compressive strength test results.

SIAB Procurement & Placement:

Modular Unit shall be approximately 1,000 SF, provide space for approximately

23-25 workstaƟons, and shall meet ICD 705 and SAPF requirements

Mount and secure the SCIF in a box onto the newly installed concrete pad per the manufacturer's anchoring requirements.

The contractor is responsible for procuring the machinery necessary to liŌ and place the SIAB.

Provide stub-out locaƟons in the concrete pad for electrical and communicaƟons services.

3.2 Electrical Service

Conduit and Wiring:

Install appropriately sized electrical service to provide 120/208V, 3-phase, 4-wire, 200A, 60 Hz service to the SIAB. Electrical service demands will be driven by chosen SCIF in a box requirements.

Trench and install conduit from the Main DistribuƟon Panel in Building 4290 to the SIAB's electrical panel stub-out locaƟon.

All conductors used shall be copper and must be conƟnuous runs without splices.

All exterior fiƫngs shall be weatherproof.

ConnecƟons and TesƟng:

Provide and install a new 200A breaker in the designated distribuƟon panel.

Provide electrical grounding to the SIAB mounted bonding plate per the project specificaƟons.

Connect the electrical service to the SIAB and coordinate with the government

Project Manager (PM) for a full systems check.

Perform an arc flash study for the affected electrical equipment and provide warning labels. Provide the study results as a submiƩal.

3.3 CommunicaƟons Infrastructure

Duct Bank InstallaƟon:

Install a duct bank system from the designated communicaƟons Ɵe-in point (e.g., exisƟng manhole or hand hole) to the SIAB’s communicaƟons panel stub-out.

Install a new telecommunicaƟons maintenance hole, if required by the project design.

The duct system shall be concrete-encased schedule-40 conduit. The contractor is responsible for field-verifying all measurements.

Cable and Service InstallaƟon:

Engineer-Furnish-Install-and-Test (EFI&T) a complete and usable telecommunicaƟons fiber opƟc and copper cable system.

Install new single-mode (SM) fiber opƟc and mulƟ-pair copper cabling from the source at Building 4290 to the SIAB, using the new duct bank infrastructure.

Fusion splice new fiber cables as required and install new splice cases.

Install new fiber patch panels (Lightguide InterconnecƟon Units or LIUs) and a telecommunicaƟons equipment cabinet inside the SIAB.

All newly installed cables shall be tested "on the reel" before installaƟon and aŌer final terminaƟon. The contractor shall perform OpƟcal Time Domain

Reflectometry (OTDR) and AƩenuaƟon tests on all fiber strands.

Label all new cables and patch panels in accordance with ANSI/TIA-606 and Joint

Base Lewis-McChord labeling standards.

Provide a detailed communicaƟons installaƟon plan and test reports as submiƩals.

4.0 CONSTRUCTION REQUIREMENTS

Work Hours: Normal work hours are 0700 to 1600, Monday through Friday, excluding

Federal holidays. ExcepƟons may be authorized with prior approval from the government PM.

Permits: The Contractor shall obtain all required permits before starƟng work, including but not limited to digging permits.

Codes and SpecificaƟons: The Contractor shall comply with the most recent ediƟons of all perƟnent Local, State, and Federal codes, including the NaƟonal Electrical Code (NFPA

70), Unified FaciliƟes Criteria (UFC), and applicable installaƟon design standards.

Environmental: The Contractor shall comply with all environmental regulaƟons, including the submission of an Environmental ProtecƟon Plan (EPP) and a Stormwater PolluƟon

PrevenƟon Plan (SWPPP) if applicable.

Waste Management: The contractor shall create and follow a waste management plan to meet or exceed installaƟon-specific construcƟon and demoliƟon waste diversion goals.

UƟlity Outages: Any required uƟlity outages must be coordinated with the government

PM a minimum of 14 calendar days in advance.

Proposed Loca on for new SCIF in a box

Project Loca on – MDC PAC SCIF

FRONT ISOMETRIC

GROUNDING LUG

(SEE SHEET 8)

4' X 5' AWNING

HIGH SECURITY SINGLE DOOR

WITH NAPEC HASP

ANCHOR BRACKET

45'

10'

15'

1:64

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

1 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

STC 50 "HAZE GRAY" - DEVTHANE 349QC

1384940044.CIV

Text Box Example SCIF in a Box Design:

*Contractor must confirm all requirements of scope for final SCIF design.

*Contractor not required to use this manufacturer. This is for information only.

RIGHT SIDE ELEVATION

12'21'12'

50'-8 1/2"

45'

48'-0 1/4"

1:49.7485

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

2 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

STC 50 "HAZE GRAY" - DEVTHANE 349QC

REAR ELEVATIONFRONT ELEVATION

4'

10'-11 3/8"

200AMP 120/208V 3PH 60HZ

MAIN BREAKER

EXTERIOR ELECTRICAL PANEL

SIGNAL J-BOX

(THERMOSTAT AND TAMPERS)

24" X 24" NETWORK ENTRANCE

W/ TWO WGF12 FIBER WAVEGUIDES

2'-10"

8'-2"

4'

SECURITY

LED LIGHT

VESTIBULE

AIR VENT

6"

9'-11 7/8"

15'-1 1/2"

GROUNDING LUG

(SEE SHEET 8)

D-RING

ANCHOR BRACKET

WALL MOUNTED

HVAC

4' X 5' ALUMINUM AWNING

2'-2"

SIGNAL J-BOX

(THERMOSTAT AND TAMPERS)

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

3 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

'-9

/2

W

ID

TH

O F

BA

SE

F R

AM

E

44'-10" WIDTH OF BASE FRAME2 1/2"

45'-3" TO BOLT CENTERS

'-5

/2

TO

B O

LT

C

EN

TE

R S

1'-2"

11"

1'-2"

11"

45'-0 1/2"

15'

BASE FRAMING PLAN

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

4 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

5'-7 1/4"

8'

15'

13'-10 3/4"

CONFERENCE / CER

WORK AREA

6'

SHREDDER(BY

OTHERS)

PRIN

TER(BY

OTHERS)

2 DRAWER

GSA SAFE

(BY OTHERS)

2'-6"

TYP. 4' TYP.

FURNITURE

(BY OTHERS)

27'-8" 16'

45'

FLOOR PLAN

1 3

VESTIBULE

8'

3'-6"

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

5 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

STC 50 "HAZE GRAY" - DEVTHANE 349QC

DOOR SCHEDULE

DOOR QTY SIZE / SWING DESCRIPTION HARDWARE

1 1 3070 / LHR ARMAG HIGH SECURITY DOOR, A-36 STEEL W/ 2" HARDWOOD MIL-DTL-29181 HIGH SECURITY HASP / PANIC BAR EXIT DEVICE 2 1 3070 / RH 18 GA COMMERCIAL METAL DOOR W/ 16 GA FRAME COMMERCIAL LEVER LOCKSET / CLOSER / WEATHER STRIPPING

3 1 3070 / LHR RF SHIELDED ACOUSTIC COMBO DOOR W/ FRAME, MEETING ICS 705 SOUND

GROUP 4 LKM10K - X10 W/ KEY OVERRIDE / CLOSER

4 1 3070 / RHR 18 GA COMMERCIAL METAL DOOR W/ 16 GA FRAME COMMERCIAL LEVER LOCKSET / CLOSER

FINISH SCHEDULE

SURFACE MATERIAL COLOR

EXTERIOR PAINT DEVOE DEVATHANE 349QC HAZE GRAY

INTERIOR PRIMER DEVOE DEVATHANE 349QC GRAY

INTERIOR WALLS WHITE TEXTURED FRP .090" WHITE

CEILING WHITE TEXTURED FRP .090" WHITE

DOORS + FRAMES DEVOE DEVTHANE 349QC GREY

BASE MOULDING FLEXCO 2000 TPR WALL BASE, 4" COVE BLACK

FLOOR SQUARE CARPET TILES GREY

ICS 705 SOUND GROUP 4

STC 50 SECURITY PERIMETER

DYNASOUND DS2400

SOUND MASKER ON

RETURN DUCT

PIRCCTV CAMERA

DYNASOUND DS2400

SOUND MASKER ON

RETURN DUCT

SM

PIR

SECURITY PLAN

IDS PREP

(EQUIPMENT

BY OTHERS)

ACS PREP

(EQUIPMENT

BY OTHERS)

BOX ONLY

(BMS BY OTHERS)

BM

S

BOX ONLY

(BMS BY OTHERS)

BOX ONLY

(PIR BY OTHERS)

CCTV MONITOR

BOX ONLY

(PIR BY OTHERS)

WALL BOX FOR

IDS KEYPAD

(BY OTHERS)

WALL BOX FOR

ACS KEYPAD /

CARD READER

(BY OTHERS)

BM

S

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

6 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

2 TON WALL-MOUNT

HVAC W/ ACOUSTIC

Z-DUCT FOR SUPPLY

AND RETURN

W24HYDB05MXXXXE

3 TON WALL-MOUNT

HVAC W/ ACOUSTIC

Z-DUCT FOR SUPPLY

AND RETURN

W36HYDB05MXXXXE

A

B

EM

R

A

A

A A

C

A

C

C

EM

R

A

A

A

T T

LIGHTING / HVAC PLAN

EM

R

A

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

7 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

STC 50 "HAZE GRAY" - DEVTHANE 349QC

LIGHTING SCHEDULE

ITEM # QTY DESCRIPTION MFG / PART NUMBER

A 10 4' - LED LIGHT FIXTURE RAB LIGHTING / SEAL 4-50/D10

B 1 EXTERIOR 18W LED WALL PACK LIGHT RAB LIGHTING / SLIM18

C 3 LED EXIT / EMERGENCY LIGHT HUBBLE LIGHTING / EVCURW

NETWORK ENTRANCE

WITH TWO WGF12

FIBER WAVEGUIDES

200A 120/208V 3PH 60HZ

MAIN BREAKER PANEL

(2) 24" CABINETS FOR

SECURE NETWORKS

W/ QUAD RECEPTACLES

(1) 48" CABINET FOR

NON-SECURE NETWORKS

W/ QUAD RECEPTACLE

5'-7 1/4"

8'

15'

6'

3'-6"4' TYP. C-C

7' 4'

27'-8" 16'

45'

ELECTRICAL / NETWORKING PLAN

CONFERENCE / CERWORK AREA

6'

WALL PENETRATION

FOR RACEWAY, QTY 2

DUPLEX NEMA 5-20

RECEPTACLE FOR CCTV

WALL MOUNTED

QUAD NEMA 5-20

RECEPTACLE, QTY 10

36" AFF

WALL MOUNTED BOX FOR

NETWORK DROP, QTY 10

36" AFF

5'-10"

4'

DUPLEX NEMA 5-20

RECEPTACLE FOR SHREDDER

DEDICATED BREAKER

18" AFF

VESTIBULE

4X100A

POWER FILTER

100A 120/208V 3PH 60HZ

PANELBOARD

1:48

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

8 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

NETWORK CABINET DETAIL NETWORK DROP DETAIL

(11) 62.5 UM LC FIBER

CONNECTORS IN COLOR

CODED PATCH PANEL, QTY 2

QUAD NEMA 5-20

RECEPTACLE FOR

CABINETS (X3)

24" TALL WALL-MOUNTED

NETWORKING CABINET FOR (RED)

SECURE NETWORK

(11) 62.5 UM LC FIBER

CONNECTORS IN COLOR

CODED PATCH PANEL

24" TALL WALL-MOUNTED

NETWORKING CABINET FOR

(YELLOW) SECURE NETWORK

(11) 62.5 UM LC FIBER

CONNECTORS IN COLOR

CODED PATCH PANEL

WALL PENETRATION TO

EXTERIOR JUNCTION BOX

48" TALL WALL-MOUNTED

NETWORKING CABINET FOR

(GREEN AND WHITE)

NON-SECURE NETWORKS

4" RACEWAY

TYP WALL MOUNTED NETWORK DROP

FACEPLATE - (4) LC CONNECTORS

COLOR CODED TO NETWORK

1:20

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

9 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

1:25.7466

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

10 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,

STC 50 "HAZE GRAY" - DEVTHANE 349QC

120/208V 3Ø 60 Hz

MAIN PANEL

NEMA 3R ENCLOSURE

POWER FILTER

4 LINE 100A

RF SHIELDED

PERIMETER

200A MAIN

BREAKER

100A BREAKER TO

INTERIOR PANEL

INTERIOR PANEL

NEMA 1 ENCLOSURE

POWER DISTRIBUTION

13 14

15 16

17 18

19 20

21 22

23 24

INTERIOR SUB PANEL SCHEDULE - 100A 120/208V 3Ø RATED PANEL - MAIN LUG ONLY SURFACE MOUNT - NEMA 1

BRK. VOLTS AMPS /

POLES DESCRIPTION

LOAD (VA)

DESCRIPTION AMPS /

POLES VOLTS BRK.

A B C

1 120 20/1 NETWORK CABINET #1 1000 / 800 RECEPTACLES #1-2 20/1 120 2

3 120 20/1 NETWORK CABINET #2 1000 / 800 RECEPTACLES #3-4 20/1 120 4

5 120 20/1 NETWORK CABINET #3 1000 / 800 RECEPTACLES #5-6 20/1 120 6

7 120 20/1 CCTV RECEPTACLE 180 /800 RECEPTACLES #7-8 20/1 120 8

9 120 20/1 SHREDDER 400 / 800 RECEPTACLES #9-10 20/1 120 10

11 120 20/1 PRINTER 400 / 200 CER LIGHTING 20/1 120 12

13 120 20/1 SPARE - / 360 IDS / ACS 20/1 120 14

15 120 20/1 SPARE - / 250 WORK AREA LIGHTING 20/1 120 16

17 120 20/1 SPARE - / - SPARE 20/1 120 18

19 120 20/1 SPARE - / - SPARE 20/1 120 20

21 120 20/1 SPARE - / - SPARE 20/1 120 22

23 120 20/1 SPARE - / - SPARE 20/1 120 24

CONNECTED LOAD PER PHASE 3140 3250 2400

TOTAL CONNECTED LOAD (KVA) 8.79

EXTERIOR MAIN PANEL SCHEDULE - 120/208V 3Ø RATED PANEL W/ 200A MAIN BREAKER SURFACE MOUNT - NEMA 3R

BRK. VOLTS AMPS /

POLES DESCRIPTION

LOAD (VA)

DESCRIPTION AMPS /

POLES VOLTS BRK.

A B C

208 30/3 HVAC

3600 / 4200

HVAC 35/3 208

3 3600 / 4200 4

5 3600 / 4200 6

7 120 20/1 EXTERIOR LIGHTING 18 / 230 VESTIBULE 20/1 120 8

9 120 20/1 SPARE - / 3250

INTERIOR POWER 100/3 208

11 120 20/1 SPARE - / 2400 12

13 120 20/1 SPARE - / 3140 14

15 120 20/1 SPARE - / - SPARE 20/1 120 16

17 120 20/1 SPARE - / - SPARE 20/1 120 18

CONNECTED LOAD PER PHASE 9388 11050 10200

TOTAL CONNECTED LOAD (KVA) 30.64

120/208V 3Ø 60 Hz

TYPICAL GROUNDING KIT

TYPICAL WALL / ROOF CONSTRUCTION

6 5/8"

7 3/8"

10 1/8"

TYPICAL FLOOR CONSTRUCTION

COPPER BONDING

PLATE IS BRAZED TO

1/4" MILD STEEL PLATE

COPPER CONDUCTOR

-28 STRANDS OF #14 AWG

COPPER WIRE IN ROPE LAY

-121,900 CIRCULAR MIL

CROSS SECTION

GROUND CLAMP

FOR Ø3/4" ROD

COPPER CLAD GROUND ROD

Ø3/4" X 10FT. BURIED IN EARTH BY

OTHERS PER NEC REQUIREMENTS

3/8" A-36 STEEL 2" X 2 5/8"

PINE BOARD HSS 6" X 6" X 1/4"

BASE FRAME

HSS 2 1/2" X 2 1/2" X 3/16"

WALL SUPPORT 48" O.C.

2 1/2" R10 BATT

MINERAL WOOL

2 1/2" R10 BATT

MINERAL WOOL

3/4" ADVANTECH

PLYWOOD 1/4" UNDERLAYMENTFLOOR

COVERING

RSIC-1 SOUND ISOLATION CLIPS

MOUNTED TO 2X4 ON 24" X 48" PATTERN

7/8" 20 GA FURRING CHANNELS

MOUNTED IN RSIC-1 CLIPS

5/8" AC PLYWOOD

HSS 6" X 2" X 1/8" + 1/8" X 6" PL

ROOF TEE 24" O.C.(2) LAYERS

1" HARDWOOD

5/8" R4 RIGID

INSULATION

5/8" R4 RIGID

INSULATION1/4" A-36 STEEL SHELL

2 1/2" R10 BATT

MINERAL WOOL

(2) LAYERS

1" HARDWOOD1/4" A-36 STEEL SHELL

5/8" AC PLYWOOD

1:16

DESCRIPTION

SHEET

DRAWN BY

DATE DRAWN

APPROVED BY

SCALE

SHEET SIZE

DRAWING NO.

APPROX. SHIPPING WT. IN LBS.

C O R P O R A T I O N LINING

SERIAL #

UNIT LENGTH

CUSTOMER

UNIT SPEC

UNIT TYPE

LOCATION

REVISION

300 ARMAG AVE. • BARDSTOWN, KY 40004 • PHONE: (800) 443-9994 •

FAX: (502) 348-4801 • EMAIL: info@armagcorp.com

Manufacturers of Arms Vaults and Explosive Storage magazines since 1969

B

11 OF

LEGEND:

KILL SWITCH

DURESS

ELECTRIC RECEPTACLE

DOUBLE STACKED

SINGLE STACKED

EMERGENCY LIGHT

TELEPHONE JACK

LAN CONNECTION

SEISMIC SENSOR

SMOKE DETECTION

PIR

BULLET TRAP

DS

EMR

P L

SS

SE

SM

PIR

BT

LEGEND CONTINUED:

THERMOSTAT

GROUND

THIS DRAWING IS THE PROPERTY OF ARMAG

CORPORATION WHO CLAIMS PROPRIETARY RIGHTS

IN THE MATERIAL DISCLOSED. IT IS ISSUED IN

CONFIDENCE FOR ENGINEERING INFORMATION

ONLY AND MAY NOT BE COPIED OR USED FOR

MANUFACTURE OF ANYTHING SHOWN WITHOUT

SPECIFIC PERMISSION FROM ARMAG CORPORATION

UNLESS OTHERWISE NOTED, TOLERANCES ARE:

FRACTIONS: ±1/16 ANGLES: ±1°

MACHINED SURFACES: 125 MICRO-INCHES

THESE TOLERANCES DO NOT APPLY TO BASIC DIMS.

DRAWN TO SCALE UNLESS OTHERWISE NOTED

TK

D

UNIT WIDTH UNIT HEIGHT

QUOTE #

EXT. FINISH

S3944

01CTD

02/07/2024

12070-01 41541

45' 15' 10'

ARC VAULT

ICD 705

80,000

ADS

JOINT BASE LEWIS-MCCHORD, WA

ARC VAULT WITH RF SHIELDING, DIVIDER WALLS, ALUMINUM AWNING,

ACOUSTIC/RF COMBO DOOR, AND NETWORK CABINETS,