TORP_0387.doc

DOD COUNTER NARCOTERRORISM PROGRAM OFFICE (cntpo)

PROGRAM AND OPERATIONS SUPPORT

counter narcotics and global threats (cn & gt)

FY14 CENTAM AND CARIBBEAN PROCUREMENT

PERFORMANCE WORK STATEMENT (PWS)

TORP 0387

23 october 2014 cntpo PROGRAM AND OPERATIONS SUPPORT

FY14 CENTAM AND CARIBBEAN PROCUREMENT

TORP 0387

1.0 MISSION OBJECTIVE.

The DoD Counter Narco-terrorism Program Office (CNTPO), currently being managed by the Counter Narcotics and Global Threats (CNGT) Division, was established to create worldwide Counter Narcotics Technology (CNT) networks, infrastructures, and capabilities that are focused on the detection, identification, and disruption of narcotics activities and organizations. This task effort will support the War Fighter in combating narcotics activities globally.

2.0 SCOPE.

2.1 Task Order (T/O) Objective.

The Task Order (T/O) objective is to provide and deliver CN support equipment for Central American (CENTAM) and Caribbean (CARIB) nations to include, but not limited to Belize, Dominican Republic, El Salvador, Guatemala, Honduras, Nicaragua, and Panama. Procurement items include Ford F-450 trucks, Night Vision Devices, and Workshop Tools among others.

2.2 Basic Contract References.

This T/O PWS establishes the requirements for the contractor to provide support in the Basic Contract task areas of 4.3.2 Training, Operations, and Logistics Support, 4.3.2.7 Logistics Support and Equipment, 4.3.2.8 Preservation, Packing and Marking, 4.3.2.9 Training, 4.3.3 Professional and Executive Support, and 4.3.3.4 Material and Equipment Purchase.

3.0 PERFORMANCE REQUIREMENTS.

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment set forth in this T/O to the delivery locations specified in the appropriate appendix. The contractor shall propose two separate deliveries per country (where applicable). One delivery shall contain short lead time/non-ITAR equipment, while the next delivery shall contain the long lead time/ITAR-controlled equipment. The contractor shall assume that VAT, and all other taxes, will be waived unless the equipment was procured within the country of final delivery, or from a bonded warehouse within that country.

Ordered items shall be delivered in a single shipment to each delivery location unless the contractor can demonstrate value to the USG for a multiple delivery approach. Partial shipments of ordered items are not authorized unless preapproved or requested by the Contracting Officer (KO). Any change in the FOB address shall be agreed to by the KO and the prime contractor in writing.

The below point of contact information is provided for each specific country:

Belize:

Dominican Republic:

El Salvador:

Guatemala:

Honduras:

Jamaica:

Nicaragua:

Panama:

3.1 BASE REQUIREMENT – F450s/Thermal Binoculars/Night Vision Goggles (NVGs).

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 1’. Unless specifically stated as ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.2 OPTION A – Boat/Tent System/Tire Lift Truck.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 2’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.3 OPTION B – Industrial Equipment.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 3’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.4 OPTION C – 4x4 Utility Trucks/Mobile Phone Accessories.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 4’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.5 OPTION D – 1000 Gallon Fuel Trailers.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 5’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.6 OPTION E – M4/M9 Equipment/Survival Beacons/GPS/Ballistic Helmets/CT-40 Kits.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 6’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.7 OPTION F – Thermal Binoculars/NVGs.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 7’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.8 OPTION G –Workshop Tools.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 8’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.9 OPTION H – Ballistic Flotation Vests/Miscellaneous Equipment.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 9’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.10 OPTION I – Aircrew Survival Vests/Body Armor.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 10’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.11 OPTION J – Pickup Trucks.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 11’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.12 OPTION K – 1000 Gallon Fuel Trailers/Weapons Accessory Equipment.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 12’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.13 OPTION L – Tool Kits/Miscellaneous Equipment/Gear.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 13’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.14 OPTION M –Deleted.

3.15 OPTION N – 1000 Gallon Fuel Trailer.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 15’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.16 OPTION O – 1000 Gallon Fuel Trailer/Water Purification/Ballistic Vests/Diving Supplies/Warrior Kits.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 16’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.17 OPTION P – Ballistic Vests and Helmets/Boat Fenders/GPS.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 17’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.18 OPTION Q – Helicopter Insert/Extract Rope/Helmet Mount/NVG Test Kit/1000 Gallon Fuel Trailer.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 18’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.19 OPTION R – Communications Equipment/GPS.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 19’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.20 OPTION S – Miscellaneous Equipment/Gear.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 20’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.21 OPTION T – Miscellaneous Equipment/Tools/Camera/Gear.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 21’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.22 OPTION U – Heavy Duty Pick-up Truck.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 22’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.23 OPTION V – NVGs.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 23’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.24 OPTION W – Miscellaneous Marine Equipment/Camera.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 24’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.25 OPTION X – Outboard Engines.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 25’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.26 OPTION Y – Weather Radar System.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix 26’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.27 OPTION Z – JPAT Guatemala Vehicle.

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of the vehicle listed in the attached ‘Appendix 27’. Unless specifically stated as a ‘Brand Name Only’, items shall be ‘Brand Name or Equivalent’.

3.28 The contractor shall be responsible for all associated taxes, duties and customs fees, and other related charges.

3.29 The contractor shall also be responsible for all aspects of export compliance, including compliance with the Arms Export Control Act and International Traffic in Arms Regulations (ITAR).

3.30 The contractor shall ensure the appropriate Technical Assistance Agreements (TAAs) and/or applicable export licenses are in place before conducting any activity under this task order that requires such approval and documentation.

3.31 All materials shall be of good quality and durability according to commercially accepted quality standards for similar products. All equipment shall be new. All equipment shall be supplied with OEM use and maintenance manuals in Latin American Spanish language when available.

3.32 The contractor shall obtain provide approval to transfer license, maintenance, and warranties from the US Government to the Government in which the equipment will be delivered in accordance with the manufacturer End User Agreement (EULA); (A00E).

4.0 WORK HOURS AND LOCATION.

The principal place of performance for this T/O shall be Central America and the Caribbean. The contractor may be required to provide labor hours in excess of 40 hours per work week to include holiday and weekends, and/or during irregular times and shifts based upon CNTPO operations and exercises.

5.0 OTHER PERFORMANCE REQUIREMENTS.

5.1 Defense Base Act (DBA) Insurance.

DBA insurance is required for all personnel performing work OCONUS under this task order.

5.2 Meetings, Briefing, Publications.

The contractor shall participate in technical interchange meetings, to be scheduled upon request of the responsible Contracting Officer or written designee, to discuss and to informally evaluate the contractor’s efforts and accomplishments in direct relation to specific T/O’s. During the meetings, the contractor shall present necessary data to enable a joint review of its various assigned tasks, attendant schedules, and resource expenditures. The contractor shall present and participate in technical discussions and shall inform, in a timely fashion, the Program Manager (PM), the Contracting Office Representative (COR) and the Contracting Officer (KO) of any problems with contract execution and any proposed solutions. The contractor shall attend and participate in other meetings, as scheduled by the responsible Contracting Officer or written designee.

6.0 TEMPORARY DUTY TRAVEL (TDY).

The contractor shall perform TDY non-local travel, as required in the performance of this T/O, as directed by the TM. The Contractor shall provide the performance of this task order Outside the Continental United States (OCONUS). Specific countries include, but are not limited to, Panama, Belize, Nicaragua, Honduras, El Salvador, Peru, Guatemala, and the Dominican Republic. All travel required and approved under this T/O will be paid IAW the Basic Contract by reimbursement to the contractor. The contractor shall ensure that all OCONUS travelers have a country approval to enter the country for this mission as well as a Letter of Authorization (LOA) approved by the KO prior to travel. Only required travel previously approved by the KO/COR/PM will be reimbursed under this T/O.

7.0 GOVERNMENT FURNISHED EQUIPMENT OR SERVICES (GFE/GFS).

None

8.0 SECURITY.

All work performed under this T/O shall be unclassified.

9.0 TASK ORDER DELIVERABLES.

9.1 The following deliverable are required as set forth in the Basic Contract and are applicable to this T/O:

Basic Contract deliverables

* Unless otherwise stated, submit CDRLs electronically (one copy each) to the following recipients COR, PM, KO and AMIC Acquisition Org Email box (amic.pmt.acq@us.af.mil), and MEI (cntposeta@meicompany.com)

**Unless specified otherwise, number of days after the effective date of this T/O.

9.2 DATA REQUIREMENTS.

The contractor shall ensure that all employees in the SPOT database have a current DD Form 93, Record of Emergency Data Card, on file with both the contractor and the designated Government official.

9.3 Master Schedule (CDRL A00G).

The contractor shall provide a Master Project Schedule for Government approval. The contractor shall create, maintain and report the schedule in conjunction with the progress report after initial delivery. The schedule shall cover all phases of the project from kick off to task order close out. The contractor’s Master Schedule shall include; but not be limited to, the following information:

· Timeline for providing proposed staffing

· Timeline for procurement of equipment

· Timeline for development of the Integration and Implementation Plan (if applicable)

· Timeline for Installation and Integration (if applicable)

· Timeline for system Test and Acceptance (if applicable)

· Timeline for Training (if applicable)

· Repair Concept and Turn Around Schedule

· Milestones for T/O Deliverables

9.4 T/O Quality Control Plan (CDRL A00G).

The contractor shall provide a draft T/O Quality Control (QC) Plan with its response to the TORP. The final plan shall be provided within thirty (30) calendar days after the date of the task order award. At a minimum, the T/O QC Plan shall address the following:

· QC Execution: The plan shall not be cursory, but discuss specifically how the prime contractor shall execute its QC responsibilities. The T/O QC Plan shall include a clearly defined QC process, key performance indicators, QC schedules and QC personnel, by name, to include those that will be performing subcontractor oversight and oversight of activities in-theater. The plan shall address how QC trend analysis and tracking of corrective actions will accomplished. The T/O QC Plan shall discuss the prime's management activity that will provide oversight and involvement in the QC process. QC personnel should not be buried in the organization, but should have a direct line to upper management.

· Reporting: Monthly status reports shall specifically discuss QC activities over the reporting period and planned activities for the next period. Information shall specifically address WHO conducted the QC, WHEN was the QC executed, HOW was the QC executed and WHAT the findings and corrective actions were. Trends overtime shall be discussed.

· Invoice Quality Control and Review: The contractor shall discuss how invoice reviews will be conducted, to include discussion on how the primes, subcontractor and supplier supporting data will be reviewed for consistency with task order requirements and the contractor's approach to execute the task order.

9.5 Management Plan (CDRL A00G).

The contractor shall provide a management plan that shall define a management system to plan and control this T/O effort. The management plan must delineate how the contractor plans to accomplish the effort supporting the specific T/O, to include a breakout of Direct Productive Person Hours (DPPHs), travel, material, ODC, DBA Insurance, a milestone schedule, and a schedule for the planned expenditure of funds. The final plan shall be provided within forty-five (45) calendar days of the contract award.

9.6 Licenses, Export Agreements, and Certifications (CDRL A00H).

The contractor shall provide a cover letter describing the purpose of their submission, POC, Contract/TORP number, description of each enclosed attachment and should include original document(s) nomenclature (if revised). The attachments shall be originals or certified originals and be dated, signed by a cognizant authority and indicate specific agreement terms. The contractor shall provide an English translation of foreign language documents when applicable.

9.7 Contractor’s Progress Report (CDRL A002).

A comprehensive progress report shall be delivered monthly to the Program Manager (PM) and Contract Officer Reprehensive (COR). The report shall, at a minimum contain an overall schedule, the current status of funding on the T/O, accomplishments completed, any potential problems, and any lessons learned. These reports shall be delivered in accordance with CDRL A002 Expenditure Report of the Basic Contract. These reports are due no later than the seventh (7th) calendar day of each month.

9.8 Status Meetings (CDRL A003).

The contractor shall provide a status review either in person via teleconference or via electronic mail within ten (10) calendar days of a request by the KO, COR or PM. This will include a PowerPoint presentation which will address current status of the T/O, including a technical/management review, a financial review (at a minimum the status of invoicing), anticipated risks/risk mitigations, delivery status including anticipated dates, status of any export compliance/ITAR issues, Technical Assistance Agreements (if required), country clearance issues for personnel traveling OCONUS, anticipated modifications, etc.

9.9 Program Reviews (CDRL A004).

The contractor shall support Program Reviews (commonly called Program Management Reviews [PMR]) in support of CNTPO which will occur twice per calendar year, but may be scheduled as necessary. Formats for PMRs will be provided by the COR ahead of PMRs. In addition, the dates and locations will be announced well in advance of the meetings. In some cases, time will be allotted for the contractor to meet individually with representatives from CNTPO to discuss contractual issues.

9.10 Product Support Plan (CDRL A00E).

The contractor shall provide a Product Support Plan forty-five (45) calendar days prior to delivery/shipment. The plan shall describe a clear process that explains the acquisition, delivery, transfer, and end user product support for all items procured IAW this Task Order. Include:

· Roles and responsibilities of all entities involved in the acquisition, delivery, transfer and end user product support

· How items will be moved/transferred, from the manufacturer, through other parties, to the end user; include method of delivery (ex. ground, air, electronically) and delivery location(s). Identify documentation required to complete the movement/transfer of items and items that require an export license.

· Product/Equipment List; see example at Annex 1. Identify items that have a shelf life or expiration date.

· Warranty, maintenance agreement, software, software license, and software maintenance agreement details; see examples at Annex 2 and 3. Details shall include product/item covered (ex. make, model, lot number, serial number, key, etc); date coverage begins and ends; coverage period; where coverage is applicable (specify geographical location); type of warranty/license/agreement; registration process; and how to obtain service/support. Details shall be submitted for each coverage type (warranty, maintenance agreement, software, software license, and software maintenance agreement).

· Process for renewing coverage.

9.10.1 Warranty.

The contractor shall provide standard Original Equipment Manufacturer (OEM) warranties (noting above or beyond the warranties that come with the initial purchase) for all items procured IAW this Task Order. Warranties issued shall be the same warranty offered to the general public. Warranties shall become effective upon date of delivery to and acceptance by the US Government and upon signing the Form DD250. Upon delivery and acceptance it is the responsibility of the end user to register all warranties and follow the warranty process for communication, servicing, and/or exchange. All requirements for shipping a product to the OEM for warranty analysis or repair will be the responsibility of the End User. Include warranty details IAW PWS paragraph 9.10 Product Support Plan and Annex 2.

ANNEX 1: Product/Equipment List Example

Ref

Agreement?

Software

License?

Date

ANNEX 2: Warranty Example

PWS

Reference

Start Warranty

End

Applicability End User Contact Information

www.dell.support.com 1-800-624-9896

ANNEX 3: Software Example

PWS

Reference

Start Coverage

End

No End

WH6F176LODM24

www.microsoft.support.com 1-800-724-5769

APPENDIX A

PERFORMANCE REQUIREMENTS SUMMARY MATRIX

PERFORMANCE

OBJECTIVE

PERFORMANCE INCENTIVE

Performance meets all technical and functional requirements, and is highly responsive to changes in technical direction and/or the technical support environment.

Personnel qualifications, assessments, evaluations, analyses, recommendations, and related input are thorough, reliable, highly relevant to T/O requirements, and consist of substantial depth and breadth of subject matter expertise.

Deliverable reports contain all required data and meet all applicable CDRL requirements.

Contractor technical performance meets all T/O requirements.

Adequate Key Personnel with appropriate qualifications including security clearances (if required) provided at least 95% of time. Problems that are encountered are minor and resolved in a satisfactory manner.

EXCEPTIONAL

Performance meets all and exceeds many T/O requirements. Performance delivered with no required re-performance/rework 99% of time; problems that are encountered are minor and resolved in a highly effective manner.

VERY GOOD

Performance and deliverables meet all and exceed some T/O requirements. Performance delivered with no required re-performance/rework at least 97% of time; problems that are encountered are minor and resolved in an effective manner.

SATISFACTORY

Performance and deliverables meet all T/O requirements. Performance delivered with no re-performance/rework at least 95% of time; problems that are encountered are minor and resolved in a satisfactory manner.

MARGINAL

Some T/O requirements not met and/or performance delivered with re-performance/rework required more than 20% of time. Problems encountered were resolved in a less than satisfactory manner.

UNSATISFACTORY

Many T/O requirements not met. Numerous re-performances/rework required. Substantial problems were encountered and inadequate corrective actions employed.

Services.

Assignment of performance rating for schedule criteria:

EXCEPTIONAL

T/O milestones/ performance dates met or exceeded 99% of time (excluding government caused delays)

VERY GOOD

T/O milestones/ performance dates met or exceeded at least 97% of time (excluding government caused delays)

SATISFACTORY

T/O milestones/ performance dates met or exceeded at least 95% of time (excluding government caused delays)

MARGINAL

T/O milestones/ performance dates met less than 95% of time (excluding government caused delays)

UNSATISFACTORY

T/O schedule/performance dates met less than 80% of time

(excluding government caused delays)

Actual T/O labor resource mix is maintained within 3% of originally awarded T/O resource mix; travel and ODCs effectively monitored and controlled.

EXCEPTIONAL

Actual T/O resource mix maintained within originally awarded T/O resource mix

VERY GOOD

Actual T/O resource mix maintained within 1% of originally awarded T/O resource mix

SATISFACTORY

Actual T/O resource mix maintained within 3% of originally awarded T/O resource mix

MARGINAL

Actual T/O resource mix maintained within 10% of originally awarded T/O resource mix

UNSATISFACTORY Actual T/O resource mix exceeds 10% of originally awarded T/O resource mix

THIS PAGE INTENTIONALLY LEFT BLANK.

APPENDIX 1 – Base Requirement **Appendix 1 Base Requirement Includes p. 20-27 Appendix 1 has multiple shipping locations. The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. Each item listed below shall be shipped to the corresponding address in the table:

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

BASE NAVAL 27 DE FEBERERO

JEFATURA DE ESTADO MAYOR

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

CALLE CONCEPCION NO. 910

SAN SALVADOR,

EL SALVADOR

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

Comando Naval Del Pacifico, Aldea Santa Rosa KM 109, Carretera a Puerto San Jose, Guatemala

• Shall be most current ITAR-exportable item (minimum Gen 2+ Intensifier Tube)

• Shall be provided with head mount and Personnel Armor System for Ground Troops (PAGST) helmet mount

• Image Tube Gen 2+ IDi - “Improved Definition”

• Resolution 47-54 lp/mm

• Photo Sensitivity <350

• Magnification 1x standard; 3x, 5x, 8x optional

• Lens System F1.2, 24 mm

• Field of View (FOV) (°) 40

• Range of Focus (m) 0.25 to infinity

• Diopter Adjustment (dpt) -5 to +5

• Controls Digital

• Automatic Brightness Control, Bright Light Cut-off, Automatic Shut-off System

• Infrared Illuminator (Built-in), IR Indicator (in FOV), Low Battery Indicator (in FOV)

• Power Supply (1) 3 V lithium, or (1) AA Alkaline

• Battery Life (hours) 60

• Environmental Rating Water and fog resistant

• Operating temperature (°C) -40 to +50

• Dimensions (LxWxH, mm/in) 150 x 102 x 70 / 5.9 x 4.0 x 2.7

• Weight (kg/lbs) 0.45 / 1.0

c/o U.S. Military Group Avenida Reforma 7-45, Zona 10, Guatemala, Guatemala 01010

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

Base Naval de Puerto Castilla Trujillo, Colon

• Shall perform no less than 750 meters

• Shall include a digital compass (magnetic bearing)

• Low battery indicator

• AA battery and external power

• Field of view no less than 18 x 14 degrees

• Focus no less than 1m to infinity

• Shall detect a human no less than 900m

• Shall include a zoom capable of 4X magnification

• Shall operate no less than 7 hours on one set of batteries

• Shall have minimum one year warranty

Base Naval de Puerto Castilla Trujillo, Colon

[Qty 10] Batallón de Infantería de Marina (BIM) Carretera al Muelle de Cabotaje Calle a los Diques 500 mts. después del Restaurante Arrecife La Ceiba, Atlántida

• Shall be most current ITAR-exportable item (minimum Gen 2+ Intensifier Tube)

• Shall be provided with head mount and PAGST helmet mount

• Image Tube Gen 2+ IDi - “Improved Definition”

• Resolution 47-54 lp/mm

• Photo Sensitivity <350

• Magnification 1x standard; 3x, 5x, 8x optional

• Lens System F1.2, 24 mm

• FOV (°) 40

• Range of Focus (m) 0.25 to infinity

• Diopter Adjustment (dpt) -5 to +5

• Controls Digital

• Automatic Brightness Control, Bright Light Cut-off, Automatic Shut-off System

• Infrared Illuminator (Built-in), IR Indicator (in FOV), Low Battery Indicator (in FOV)

• Power Supply (1) 3 V lithium, or (1) AA Alkaline

• Battery Life (hours) 60

• Environmental Rating Water and fog resistant

• Operating temperature (°C) -40 to +50

• Dimensions (LxWxH, mm/in) 150 x 102 x 70 / 5.9 x 4.0 x 2.7

• Weight (kg/lbs) 0.45 / 1.0

Base Naval de Puerto Castilla Trujillo, Colon

[qty 10] Batallón de Infantería de Marina (BIM) Carretera al Muelle de Cabotaje Calle a los Diques 500 mts. después del Restaurante Arrecife La Ceiba, Atlántida

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

JDF Logistics Company

UP PARK CAMP

KINGSTON 5, JAMAICA

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: Gem Green

Avenida Omar Torrijos Barrió Los Rios Corozal Este Complejo SPI Edificio 9 Embajada Americana (JPAT)

• 6.7L Diesel Engine, Automatic

• 4X4

• 19.5 Tires

• 176" WB w/Extra Heavy Duty Trailer Package and Overseas High Sulfur Diesel modification

• Stake Bed Body in steel

• Color of steel: Black

• Class 5 hitch (with 2.5" square)

• Shall be provided w/ Full Size Spare Tire & Jack

Vehicle Color: White

Avenida Omar Torrijos Barrió Los Rios Corozal Este Complejo SPI Edificio 9 Embajada Americana (JPAT)

• Shall perform no less than 750 meters

• Shall include a digital compass (magnetic bearing)

• Low battery indicator

• AA battery and external power

• Field of view no less than 18 x 14 degrees

• Focus no less than 1m to infinity

• Shall detect a human no less than 900m

• Shall include a zoom capable of 4X magnification

• Shall operate no less than 7 hours on one set of batteries

• Shall have minimum one year warranty

Avenida Omar Torrijos Barrió Los Rios Corozal Este Complejo SPI Edificio 9 Embajada Americana (JPAT)

• Shall be most current ITAR-exportable item (minimum Gen 2+ Intensifier Tube)

• Shall be provided with head mount and PAGST helmet mount

• Image Tube Gen 2+ IDi - “Improved Definition”

• Resolution 47-54 lp/mm

• Photo Sensitivity <350

• Magnification 1x standard; 3x, 5x, 8x optional

• Lens System F1.2, 24 mm

• FOV (°) 40

• Range of Focus (m) 0.25 to infinity

• Diopter Adjustment (dpt) -5 to +5

• Controls Digital

• Automatic Brightness Control, Bright Light Cut-off, Automatic Shut-off System

• Infrared Illuminator (Built-in), IR Indicator (in FOV), Low Battery Indicator (in FOV)

• Power Supply (1) 3 V lithium, or (1) AA Alkaline

• Battery Life (hours) 60

• Environmental Rating Water and fog resistant

• Operating temperature (°C) -40 to +50

• Dimensions (LxWxH, mm/in) 150 x 102 x 70 / 5.9 x 4.0 x 2.7

• Weight (kg/lbs) 0.45 / 1.0

Avenida Omar Torrijos Barrió Los Rios Corozal Este Complejo SPI Edificio 9 Embajada Americana (JPAT)

• Shall perform no less than 750 meters

• Shall include a digital compass (magnetic bearing)

• Low battery indicator

• AA battery and external power

• Field of view no less than 18 x 14 degrees

• Focus no less than 1m to infinity

• Shall detect a human no less than 900m

• Shall include a zoom capable of 4X magnification

• Shall operate no less than 7 hours on one set of batteries

• Shall have minimum one year warranty

c/o Nicaragua Army, Ejército de Nicaragua, Jefe de la Dirección de Finanzas Del Ministerio de Gobernación (MINGO) 3 Cuadras al Oeste, 1 Cuadra al Norte Managua, Nicaragua

• Shall be most current ITAR-exportable item (minimum Gen 2+ Intensifier Tube)

• Shall be provided with head mount and PAGST helmet mount

• Image Tube Gen 2+ IDi - “Improved Definition”

• Resolution 47-54 lp/mm

• Photo Sensitivity <350

• Magnification 1x standard; 3x, 5x, 8x optional

• Lens System F1.2, 24 mm

• FOV (°) 40

• Range of Focus (m) 0.25 to infinity

• Diopter Adjustment (dpt) -5 to +5

• Controls Digital

• Automatic Brightness Control, Bright Light Cut-off, Automatic Shut-off System

• Infrared Illuminator (Built-in), IR Indicator (in FOV), Low Battery Indicator (in FOV)

• Power Supply (1) 3 V lithium, or (1) AA Alkaline

• Battery Life (hours) 60

• Environmental Rating Water and fog resistant

• Operating temperature (°C) -40 to +50

• Dimensions (LxWxH, mm/in) 150 x 102 x 70 / 5.9 x 4.0 x 2.7

• Weight (kg/lbs) 0.45 / 1.0

c/o Nicaragua Army, Ejército de Nicaragua, Jefe de la Dirección de Finanzas Del Ministerio de Gobernación (MINGO) 3 Cuadras al Oeste, 1 Cuadra al Norte Managua, Nicaragua

APPENDIX 2 – Option A - Boat/Tent System/Tire Lift Truck The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 2 below shall be shipped to the following address:

Belize Coast Guard

4 1/2 miles Northern Hwy

Belize City, Belize

FC420

(Zodiac)

(or equivalent) Futura Commando 13' 9" Inflatable Boat

• Length 13' 9"

• Beam 5' 9"

• Hull Weight 265 lbs

• Capacity: (6) Persons (1918 lbs)

• Maximum power allowed 50L hp (20" Shaft) using hard Aluminum deck

• Maximum Motor Weight 216 lbs

• Tube Diameter 18": ◦ Separate Air Chambers: (3 + 2 + 1)

• Fabric: 940 Decitex, Polyamide, Hypalon-Neoprene

MGPTS

(or equivalent) Modular General Purpose Tent System (MGPTS 18' X 36')

• 18 feet wide X 36 feet long

• 648 square feet floor space

• Modular and extendible in length indefinitely in 18' increments

• Fabric meets the physical characteristics of MIL-PRF 44103

Color: Olive Drab (OD) Green

DP55NM1

(or equivalent) CAT Lift Truck

• 12,000 lb lift capacity

• Diesel Fueled

• Standard Forks

APPENDIX 3 – Option B – Industrial Equipment The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 3 below shall be shipped to the following address:

Belize Defense Force Air Wing

Aircraft Maintenance Officer

Williamson Hangar Complex

Phillip Goldson International Airport

Ladyville, Belize

L144 (or equivalent) 44 Gallon Chemical Storage Cabinet

• OSHA compliant flammable liquid and chemical protection

• Self-Latching Manual Doors

• 2-Part Polyurethane coating finish to withstand salt, chemical rub, fading due to UV exposure

US Industrial Machinery

Model #USHB200-13 (or equivalent) Industrial 200 Ton X 13' Hydraulic Press Brake

• Working Pressure: 200 Tons

• Length of Working Table: 157.4”

• Distance Between Housings: 124”

• Throat Depth: 12.5”

• Stroke Adjustment of Ram: 2.75”

• Ram Travel: 7.0”

• Open Height: 17.5”

• Rapid Ram Travel Speed: 2.4”/sec.

• Rapid Ram Retreat Speed: 2.0”/sec.

• Backgauge Travel: 24”

• Hydraulic Oil Capacity: 97 Gal.

• Motor Horsepower: 20 HP

• Provided w/ available option: Computer Numerical Controlled (CNC) 2-axis Color Graphic Computer Control

• Provided w/ available option: CNC Controlled Mechanical Auto Crown

• Provided w/ available option: Sick 4000 Light Curtain

• Provided w/ detailed user manual(s) (English)

Dayton Model #13W878 (or equivalent) Mechanical Machining Foot Shear

• Capacity of Mild Steel (Gauge): 16

• Length of Cut (In.): 52

• Length of Blade (In.): 52

APPENDIX 4 – Option C – 4x4 Utility Trucks/Mobile Phone Accessories The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 4 below shall be shipped to the following address:

Belize Defense Force Intelligence Cell

BDF Force Headquarters, Price Barracks, Ladyville

Brickhouse Mobile Phone Recorder

(or equivalent) Bluetooth Mobile Phone Recorder

• Works with Bluetooth phones

• Automatic recording capability

• 340 hours call storage

Brickhouse Recover It

(or equivalent) Recover It Cell Phone & PC Monitoring Software

• Recover Text Messages on iPhones, and BlackBerry Back Up Files

• See Deleted Emails, Videos, and Pictures

• Save, View, or Delete Chat Logs

• Search Internet Cache Files

Model: FT1J-GUA

(or equivalent) 4x4 Utility Truck,

• Single Cab for one (1) driver and two (2) passengers

• Multi-Purpose Cargo vehicle (Cargo Box 15 ft.), with long bed capable of transporting twelve (12) persons

• Folding seats on cargo covered compartment to transport personnel

• Six (6) cylinder engine, 4 cycle diesel, 6 speed Transmission, Water Cool, 215 HP to 2,500 rpm

• Fuel capacity of 200 liters, standard tank with fuel water separator

• Hydraulic Brakes, Engine Brake

• Tire Size: 8.25R20-14PR with one (1) full size spare, tire jack and accessories

• Wheel Base: 3,750 mm

• 7 Tare Tons Cargo Capacity, 8.7 inches ground-clearance

• Chassis equipped w/front and rear tow hooks

• Factory installed air conditioner

• Warranty provided locally in Belize

• Color: Forest Green w/ Forest Green Canvas

Rear Enclosure Dimensions

• Minimum Dimensions:

Exterior Length: 17 ft Interior Length: 16.5 ft Exterior Width: 96 in Interior Width: 96 in External Height: 96 in Interior Height: 96 in

• Platform:

Aluminum channel 4x2 in x ¼ thickness H-Beam stringers aluminum 3x1/4 thickness Aluminum flat T-6 A 6005 Dairy Floor Light Special Rear Bumper 8in diamond plate covered in depth

• Structure:

Front Corner: Aluminum 6005-A T6 5in radio Aerodynamic Rear Corner: Aluminum 6005 – T6 reinforced Ribs: Zetas 6005 T6 Aluminum separation 16 in centered External Lining: Aluminum sheets, baked enamel white lime. x19 attached to the structure, riveted on the edges of the body and one piece of aluminum foil. 20in joints in the roof

• Doors:

Total of 2 sheets with x3 hinges and closure style container.

Two side doors, one for each side; 36 in x 66 in centered on the body.

• Internal Lining:

½ in thickness plywood

APPENDIX 5 – Option D – 1000 Gallon Fuel Trailers The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. The items listed in Appendix 5 below shall be shipped to the following locations:

QTY 2:

Guatemalan Navy- Fuerzas Especiales Navales (FEN)

Comando Naval Del Pacifico, Aldea Santa Rosa KM 109, Carretera a Puerto San Jose, Guatemala

QTY 2:Guatemalan Navy- Marine Corps (GTMC)

Comandancia De La Marina De La Defensa Nacional, 11 Ave Final 23-32, Zona 13, Aurora II, Guatemala

• 1,000 gallon fuel capacity

• Shall store and dispense aviation fuel

• 2" top fill, 2" lockable pre-vent fill cap, 2" venting, drain

• 20 gpm, 12V pump w/ deep cycle battery and weather-tight battery box

• 50’x1” fuel hose on spring loaded hose reel

• Water and particulate fuel filter system

• 3 Digit Meter

• Auto shut-off nozzle

• Heavy duty solid steel tube trailer frame

• 6,000 pound trailer axles - 12,000 GVW (minimum) - with electric brakes

• 3” pintle tow ring

• 5000# Swivel jack , safety chains and hooks

• English and Spanish operating manuals for each fuel trailer Color: Red

APPENDIX 6 – Option E – M4/M9 Equipment/Survival Beacon/GPS/Ballistic Helmets/Contraband Team Detection Kits

The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 6 below shall be shipped to the following address:

2a Brigada de Infanteria “CAP.GRAL.Rafael Carrera” Avenida Miguel Garcia – Granados

Adelante, Puente Blanco, Zacapa, Guatemala

M4 Training Dummy Rifle

• Durable high impact polyurethane

• Collapsible stock

Color: Blue

.30 CAL Cleaning Kit w/ Storage Soft Pack

• 8" and 30" cables for cleaning

• Caliber-specific bronze bore brush

• Solid brass obstruction removal tools for jammed cases and other blockages

• Solvent to clean, lubricate and protect barrel

• Oversized bore brush for chamber cleaning

NSN 6545-01-539-6448

(or equivalent) M9 Field-Ready Medic Bag

• Kit version w/ medical kits contained in field-ready bag

Survival ELT - Emergency Locator Transmitter/Locator Beacon, Reflective Yellow

• Transmit on global 406MHz and local 121.5MHz satellite frequencies

• The rescue zone should include both land and sea

• Integrated 50-channel GPS in order to provide a pinpoint location in transmission

• Include an LED flash signal which sends out “SOS” in order to aid with visual acquisition

• Transmit distress and location information for 24 hours upon activation

• Waterproof and shall operate in temperatures to -20 Celsius

• Include an integrated battery with a shelf life of 5-years to eliminate the need for recharging or battery checks

Garmin GPSMAP 62stc (or equivalent)

Gentex

P/N C11812

(or equivalent) TBH-II Ballistic Helmet Color: Black

Sizes: 20 SM; 90 MED; 20 LG; 10 XL

CT-40 Kit

Campbell Security

(or equivalent) Contraband Team Inspection Kit

· K-910B Contraband detector

· Perfect Vision V20 Videoscope

· LRF (Laser Rangefinder) LEICA

· PM-10 extending inspection mirror

· PN-30 (6) pocket pencil probes

· P-41 heavy duty inspection probe

· CT-PTK Personal Inspection Tool Kit

· CT-40 Pelican Carrying Case with Wheels

CT-40 manuals for all equipment

APPENDIX 7 – Option F – Thermal Binoculars/NVGs

The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 7 below shall be shipped to the following address:

2a Brigada de Infanteria “CAP.GRAL.Rafael Carrera” Avenida Miguel Garcia – Granados

Adelante, Puente Blanco, Zacapa, Guatemala

PhantomIR

(or equivalent) Infrared Thermal Binoculars

• Shall perform no less than 750 meters

• Shall include a digital compass (magnetic bearing)

• Low battery indicator

• AA battery and external power

• Field of view no less than 18 x 14 degrees

• Focus no less than 1m to infinity

• Shall detect a human no less than 900m

• Shall include a zoom capable of 4X magnification

• Shall operate no less than 7 hours on one set of batteries

• Shall have minimum one year warranty"

Armasight NYX-7 IDi

(or equivalent) Night Vision Goggle

• Shall be most current ITAR-exportable item (minimum Gen 2+ Intensifier Tube)

• Shall be provided with head mount and PAGST helmet mount

• Image Tube Gen 2+ IDi - “Improved Definition”

• Resolution 47-54 lp/mm

• Photo Sensitivity <350

• Magnification 1x standard; 3x, 5x, 8x optional

• Lens System F1.2, 24 mm

• FOV (°) 40

• Range of Focus (m) 0.25 to infinity

• Diopter Adjustment (dpt) -5 to +5

• Controls Digital

• Automatic Brightness Control, Bright Light Cut-off, Automatic Shut-off System

• Infrared Illuminator (Built-in), IR Indicator (in FOV), Low Battery Indicator (in FOV)

• Power Supply (1) 3 V lithium, or (1) AA Alkaline

• Battery Life (hours) 60

• Environmental Rating Water and fog resistant

• Operating temperature (°C) -40 to +50

• Dimensions (LxWxH, mm/in) 150 x 102 x 70 / 5.9 x 4.0 x 2.7

• Weight (kg/lbs) 0.45 / 1.0

APPENDIX 8 – Option G – Workshop Tools The contractor shall coordinate delivery with the POC stated in section 3.0 of this PWS for each country. All of the items in Appendix 8 below shall be shipped to the following address:

2a Brigada de Infanteria “CAP.GRAL.Rafael Carrera” Avenida Miguel Garcia – Granados

Adelante, Puente Blanco, Zacapa, Guatemala

8x40

Container Tech

(or equivalent) 8 ft X 40 ft Storage Container

• Double-door front & back access

• Ground level access

• Water-tight & fire safe heavy duty steel

• Equipped with high-security lock box system

APPENDIX 8 – Option G (cont’d)

Workshop Tools for Non-Armored Vehicles

Robinair 34788

(or equivalent) A/C Evacuation/Recovery/Recharge Machine

· Shall comply with newest standard SAE J2210

· Fully automatic

· SD Card Slot

Waekon Cooling System Analyzer Master Kit

(or equivalent) Cooling System Analyzer

· Shall be compatible with Jeep J8s

· Shall be capable of providing pressure and temperature testing on a running engine

Sealey Air Compressor SAC42055B

(or equivalent)

5.5 Workshop Compressor 200ltr

· Shall be compatible with Jeep J8s

· Two stage pump system with 5.5HP motor

· Shall be a 3-phase compressor suitable for workshop use

Uni-Max 3202

(or equivalent) 1/2” Air Impact Gun 620Nm

· Shall be compatible with Jeep J8s

· 10 torque levels

· ½” Sq. Drive

· Maximum Torque: 620Nm

1/2” Air Impact Gun 1380Nm

· Shall be compatible with Jeep J8s

· 10 torque levels

· ½” Sq. Drive

· Maximum Torque: 1380Nm

Matco MT2858A

(or equivalent) 3/8” Heavy Duty Air Ratchet

· Shall be compatible with Jeep J8s

· Shall be capable of a minimum of 100lbs of torque

Air Hose System

· Shall have an automatic recoil system

· Rotation of 180 degrees

· Wall-mountable

· Maximum Pressure: 300 psi

· Length: 15m

· Shall be compatible with Jeep J8s

· Shall have a bolt capacity of 3/8”

· Shall have a variable speed option

Central Pneumatic 68259

(or equivalent) 4” Blow Gun

· Shall be compatible with Jeep J8s

· Shall facilitate up to 90 PSI to clean debris quickly and easily

Handheld Tire Inflator

· Shall be capable of 0-17 psi

· CCE Homologated

Schumacher SpeedCharge Wheel Charger

(or equivalent) Vehicle Battery Charger

· Shall be able to re-charge a Jeep J8 vehicle battery

· Shall have 150 amps emergency engine start power

· Shall have a minimum of 55-amp rapid charge capability

Duracell 1500 Watt Inverter

(or equivalent) Portable Battery Power Pack

· Shall be capable of providing a power charge to a Jeep J8

· Shall include an A/C port

· Shall include all necessary cables

AW Direct EZMS4000

(or equivalent) Battery Memory Saver

· Shall be…