TORP_0308.doc

CNTPO Program and Operations Support

FY13 Colombia Military CN Equipment and Operational Support

TORP 0308

DoD Counter Narco-terrorism Program Office

(CNTPO) PROGRAM AND OPERATIONS SUPPORT

PERFORMANCE WORK STATEMENT (PWS)

FY13 Colombia military CN Equipment and operational support

TORP 0308

28 may 2014

1.0 MISSION OBJECTIVE.

The DoD Counter Narcoterrorism Program Office (CNTPO) was established to create Counter Narcoterrorism Technology (CNT) networks, infrastructure, and capabilities worldwide that are focused on the detection, identification, and disruption of narcoterrorist activities and organizations. This task effort will support the War Fighter in the combating of Narcoterrorism worldwide.

2.0 SCOPE.

2.1 Task Order Objective:

The T/O objective is to provide and deliver CN support equipment for the Colombian Military. Procurement items include, but are not limited to, Ground Operations and Maintenance equipment, Tactical Communications and Signals equipment, Small Arms Repair equipment, Scan Eagle Transportable Hub equipment, Firefighting equipment, Boat and Engine Maintenance equipment, and Workshop Tools.

2.2 Basic Contract References:

This T/O PWS establishes the requirements for the contractor to provide support in the Basic Contract task areas of 4.3.2.7 Logistics Support and Equipment; 4.3.2.8 Preservation, Packing and Marking; and 4.3.3.4 Material and Equipment Purchase.

3.0 PERFORMANCE REQUIREMENTS.

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached appendices for this T/O to the delivery location(s) specified below:

Fuerza Aerea Colombiana

Deposito Aduanero Habilitado Base Feraz Aerea Catam Bogota

ATT: Mayor Fernando Cristancho

USMILGP Bogotá, Colombia

ATT: Roy De Hoyos/Manuel Lopez The contractor shall provide all labor, materials, equipment, travel, DBA insurance, and all else required to satisfy the requirements set forth in this PWS.

The Embassy shall secure VAT exemptions. These costs should not be included in the proposal.

The contractor shall also be responsible for all aspects of export compliance, including compliance with International Traffic in Arms Regulation (ITAR)/Trades Agreement Act (TAA) compliance and obtaining all required export documentation, licenses and approvals required for the delivery of the equipment.

The contractor shall ensure the appropriate Technical Assistance Agreements (TAAs) and/or applicable export licenses are in place before conducting any activity under this task order that requires such approval and documentation.

Option D and M and Chadwick Helmuth systems within the PWS will be supporting the following aircraft:

UH-60, Huey II, Bell-412, Bell 212, AS-555, BK-117 and BO-105.

3.1 BASE REQUIREMENT COLOMBIAN ARMY (COLAR) Ground Operations (Ops) Maintenance Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix A’ . Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent”.

3.2 OPTION A COLAR Ground Ops Maintenance Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix B’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent”.

3.2 OPTION B COLAR Ground Ops Maintenance Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix C’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent”.

3.3 OPTION C 15T/COLAR Hoist Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix D’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent”.

3.4 OPTION D 15T/COLAR Hoist Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix E’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent”.

3.6 OPTION E 15T/COLAR Hoist Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix F’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.7 OPTION F COLOMBIAN SPECIAL OPERATIONS FORCE (COLSOF)/ JOINT SPECIAL OPERATIONS (JSOP) Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix G’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.8 OPTION G US AIR FORCE MISSION (AFMIS) Scan Eagle Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix H’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.9 OPTION H AFMIS Scan Eagle Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix I’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.10 OPTION I AFMIS Scan Eagles Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix J’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.11 OPTION J AFMIS FORWARD AIR COORDINATOR (FAC) CASUALTY SEARCH AND RESCUE (CSAR)/MEDICAL EVACUATION (MEDEVAC) and Fixed-Wing Equipment, Tools and Sustainment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix K. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.12 OPTION K AFMIS COLOMBIAN AIR FORCE AT BOGOTA AIRPORT ((COMANDO AEREO DE TRANSPORTE (CATAM)) Security Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix L’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.13 OPTION L COLOMBIAN NAVY (COLNAV)- COLOMBIAN NAVAL AVIATION (CAVNA) Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix M’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.14 OPTION M COLNAV-CAVNA Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix N’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.15 OPTION N COLNAV-CAVNA Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix O’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.16 OPTION O COLNAV-COLOMBIAN COAST GUARD (COMANDO DE GUARDACOSTAS (COGAC)) Firefighter Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix P’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.17 OPTION P COLNAV-COGAC Engine Maintenance

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix Q’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.18 OPTION Q COLNAV-COLOMBIAN MARINES (COMANDO DE INFANTERIA DE MARINIA (CIMAR)) Equipment The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix R’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.19 OPTION R COLNAV-CIMAR Diving Equipment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix S’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.20 OPTION S J85 SATCOM Radio Sustainment

The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix T’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.21 OPTION T COLAF - Regional Helicopter Training Center (RHTC) Tools The contractor shall provide, deliver, and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix U’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.22 OPTION U – Colombian Army Support Equipment

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix V’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.23 OPTION V – Colombian Navy Support Equipment

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix W’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.24 OPTION W – Colombian Air Force Support Equipment

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of all equipment listed in the attached ‘Appendix X’. Unless specifically stated as a ‘Brand Name Only’, items shall be “brand name or equivalent.”

3.25 OPTION X COLOMBIAN NAVY (COLNAV)- COLOMBIAN NAVAL AVIATION (CAVNA) Hoffman NVG Equipment Installation and Training The contractor shall provide OEM certified installation (3 days) and operator and maintenance training (5 days), excluding weekends for the Hoffman night vision (NV) equipment being procured under option A and D of this task order. The installation and training will take place in Tolemaida, Colombia after delivery of the equipment listed below.

· ANV-120 NVG Test Bench, four (4) each, two from option A and two from option D

· ANV 20/20 Test Bench, four (4) each, two from option A and two from option D

· Hoffman Engineering NVD Equipment (kit), one (1) each as identified in option A

The contractor shall develop a Program of Instruction (POI) Latin American Spanish language training course not to exceed 5 days in length and provide in this course to the Colombian Military in Latin American Spanish. The POI shall address the following minimum sections: course description; course administration; overall and topic-level learning objectives; instructional methods; student assessment methodology; and, student documentation. The contractor shall coordinate with the COR and PM for all proposed POIs and obtain approval from the COR or PM before beginning any student training courses.Training shall be conducted by an OEM certified team on the Hoffman equipment identified in the paragraphs above and shall consist of operational level training on the basic operations of the Hoffman systems, basic repairs, and preventative/corrective maintenance. The contractor shall develop POIs that address the following minimum topics::

· History on the systems and features

· Common features of the systems

· Unique features of the systems

· Familiarization and handling characteristics

· Operational deployment in tactical situations of the systems

· Preoperational check requirements

· Safety concerns with the use of the equipment

· Preventative maintenance requirements

· Basic maintenance for continued operation

· Component replacement

· Wiring/component repairs

· Electrical System checks

· Replacement of consumable parts

3.26 OPTION Y COLNAV- (CAVNA) Helicopter Maintenance Stands

The contractor shall provide, deliver and ensure receipt and turn-over acceptance of four (4) each Universal Maintenance Stands (UMS), Spika Welding & Manufacturing Inc. Part Number, SPUM72-4030 or equivalent. Basic characteristics/features of the stand are: stands are capable of being used on both sides of the aircraft, bumpers on deck edge to protect aircraft from direct contact, OSHA compliant fall protection, interchangeable railings with tool free installation, railings that can be removed from the front of the stand when placed directly against the aircraft, spring closed swing gate, telescopic deck legs, adjustable railings that lower for overhead obstructions, adjustable ladder that allows legs of ladder to remain on the ground regardless of the height of the platform, casters for easy movement and locking brakes for secure stand placement, stand constructed of corrosion-resistant lightweight aluminum.

4.0 DELIVERY.

Ordered equipment shall be delivered in a single shipment unless the contractor can demonstrate value to the USG for a multiple delivery approach. Due to limited man power on the USG side, a single shipment greatly minimizes cost to the USG, and as such, partial shipments of ordered items are not authorized unless preapproved or requested by the Contracting Officer (KO). Any change in the method of shipment or the delivery address shall be agreed to by the KO and the prime contractor in writing. The contractor shall provide DD Forms 250 and the list of equipment (including model and serial numbers) with by-item costs to the Points of Contact (POCs) below one (1) month prior to the delivery and transfer.

5.0 WORK HOURS AND LOCATION.

The principal place of performance for this T/O shall be CONUS. The contractor may be required to provide labor hours in excess of 40 hours per work week to include holiday and weekends, and/or during irregular times and shifts based upon CNTPO operations and exercises.

6.0 OTHER PERFORMANCE REQUIREMENTS.

6.1 Defense Base Act (DBA) Insurance.

All personnel performing duties in hazardous areas OCONUS shall be included in and insured with a policy covering Defense Base Act (DBA) requirements. DBA insurance for all personnel performing work OCONUS under this task order is required.

6.2 Meetings, Briefings, and Publications.

The contractor shall participate in technical interchange meetings, to be scheduled upon request of the responsible Contracting Officer or written designee, to discuss and to informally evaluate the contractor’s efforts and accomplishments in direct relation to specific T/Os. During the meetings, the contractor shall present necessary data to enable a joint review of its various assigned tasks, attendant schedules, and resource expenditures. The contractor shall present and participate in technical discussions and shall inform, in a timely fashion, the Technical Monitor (TM) of any problems with contract execution and any proposed solutions. The Contractor shall attend and participate in other meetings, as scheduled by the responsible contracting officer or written designee.

7.0 TEMPORARY DUTY (TDY) TRAVEL.

The contractor shall perform TDY non-local travel, as required in the performance of this T/O, as directed by the TM. The Contractor shall provide the performance of this task order Outside the Continental United States (OCONUS) and inside the Continental United States (CONUS). Specific countries may include Colombia. All travel required and approved under this T/O will be paid IAW the Basic Contract by reimbursement to the contractor. The contractor shall ensure that all OCONUS travelers have a country approval to enter the country for this mission as well as a Letter of Authorization (LOA) approved by the KO prior to travel. Only required travel previously approved by the KO/COR/TM will be reimbursed under this T/O.

8.0 GOVERNMENT FURNISHED PROPERTY

N/A.

9.0 WARRANTIES and WARRANTY PROCESS

The contractor shall provide all OEM standard warranties (nothing above or beyond the warranties that come with the initial purchase) of all equipment required by the T/O on behalf of the U.S. Government. Contractors shall offer the USG at least the same warranty terms, including offers of extended warranties, offered to the general public in customary practice. The OEM warranty is typically some form of materials and workmanship guarantee. Some items may be able to be repaired in-country if the OEM has representation in-country, others will have to be shipped back to the OEM facility that is designated in the respective warranties. The time for repairs and the individual warranty terms are specific to each item’s OEM warranty and may vary widely. The warranty extended to the Government shall be specific and clearly indicate the terms of the warranty. The warranty start date shall be the date of USG acceptance.

The contractor shall provide a Warranty Plan as specified in the Task Order Deliverables section.

10.0 SECURITY.

All work performed under this T/O shall be unclassified.

11.0 TASK ORDER DELIVERABLES.

The following deliverables are required as set forth in the Basic Contract:

*Copies are to be submitted electronically whenever possible. Recipients at a minimum should include the Contracting Officer’s Representative (COR) and Technical Monitor (TM).

**Unless specified otherwise, number of days after the effective date of this task order.

12.0 DATA REQUIREMENTS:

The Contractor shall ensure that all employees in the SPOT database have a current DD Form 93, Record of Emergency Data Card, on file with both the Contractor and the designated Government official.

12.1 Master Schedule (CDRL A00G).

The Contractor shall provide a Master Project Schedule for Government approval. The contractor shall create, maintain and report the schedule in conjunction with the progress report after initial delivery. The schedule shall cover all phases of the project from kick off to task order close out. The Contractor’s Master Schedule shall include, but not be limited to, the following information:

Timeline for providing proposed staffing Timeline for procurement of equipment Timeline for development of the Integration and Implementation Plan (if applicable) Timeline for Installation and Integration (if applicable) Timeline for system Test and Acceptance (if applicable) Timeline for Training (if applicable) Repair Concept and Turn Around Schedule

Milestones for T/O Deliverables

12.2 Contractor’s Progress Report (CDRL A002)

A comprehensive progress report shall be delivered monthly to the TM and Contract Officer Representative (COR). The report shall, at a minimum contain an overall schedule, the current status of funding on the T/O, accomplishments completed, any potential problems, and any lessons learned. These reports shall be delivered in accordance with CDRL A002 Expenditure Report of the Basic Contract. These reports are due no later than the seventh (7th) calendar day of each month.

12.3 Status Meetings (CDRL A003)

The contractor shall provide a status review either in person, via teleconference or via electronic mail within ten (10) calendar days of a request by the KO, COR or TM. This will include a PowerPoint presentation which will address current status of the T/O, including a technical/management review, a financial review (at a minimum the status of invoicing), anticipated risks/risk mitigations, delivery status including anticipated dates, status of any export compliance/ITAR issues, Technical Assistance Agreements (if required), country clearance issues for personnel traveling OCONUS, anticipated modifications, etc.

12.4 T/O Quality Control Plan (CDRL A00G).

The contractor shall provide a draft specific T/O Quality Control (QC) Plan with its response to the TORP. The final plan shall be provided within thirty (30) calendar days after the date of the task order award. At a minimum, the T/O QC Plan shall address the following:

QC Execution: The plan shall not be cursory, but discuss specifically how the prime contractor shall execute its QC responsibilities. The T/O QC Plan shall include a clearly defined QC process, key performance indicators, QC schedules and QC personnel, by name, to include those that will be performing subcontractor oversight and oversight of activities in-theater. The plan shall address how QC trend analysis and tracking of corrective actions will accomplished. The T/O QC Plan shall discuss the prime's management activity that will provide oversight and involvement in the QC process. QC personnel should not be buried in the organization, but should have a direct line to upper management.

Reporting: Monthly status reports shall specifically discuss QC activities over the reporting period and planned activities for the next period. Information shall specifically address WHO conducted the QC, WHEN was the QC executed, HOW was the QC executed and WHAT the findings and corrective actions were. Trends overtime shall be discussed.

Invoice Quality Control and Review: The contractor shall discuss how invoice reviews will be conducted, to include discussion on how the primes, subcontractor and supplier supporting data will be reviewed for consistency with task order requirements and the contractor's approach to execute the task order.

12.5 Management Plan (CDRL A00G).

The contractor shall provide a management plan that shall define a management system to plan and control this T/O effort. The management plan must delineate how the contractor plans to accomplish the effort supporting the specific T/O, to include a breakout of Direct Productive Person Hours (DPPHs), travel, material, ODC, DBA Insurance, a milestone schedule, and a schedule for the planned expenditure of funds. The final plan shall be provided within forty-five (45) calendar days of the contract award.

12.6 Program Reviews (CDRL A004).

The contractor shall support Program Reviews (commonly called Program Management Reviews [PMR] in support of CNTPO which typically occur once per calendar quarter, but may be scheduled as necessary. Formats for PMRs will be provided by the COR ahead of PMRs. In addition, the dates and locations will be announced well in advance of the meetings. In some cases, time will be allotted for the contractor to meet individually with representatives from CNTPO to discuss contractual issues.

12.7 Export Control Document (CDRL A00H)

The contractor shall provide a cover letter describing the purpose of their submission, POC, Contract/TORP number, description of each enclosed attachment and should include original document(s) nomenclature (if revised). The attachments shall be originals or certified copies and be dated, signed by a cognizant authority and indicate specific agreement terms. The contractor shall provide an English translation of foreign language documents when applicable.

13.0 Task Order Unique Deliverables

The following deliverables are required as stated in this task order.

*Copies are to be submitted electronically whenever possible. Recipients at a minimum should include the Contracting Officer (KO), Contracting Officer’s Representative (COR) and Technical Monitor (TM).

**Unless specified otherwise, number of calendar days after the effective date of this T/O.

13.1 Warranty Plan (CDRL A00E)

The contractor shall provide a Warranty Plan within thirty (30) calendar days after task order award that clearly addresses the following:

· Warranty POC;

· List of items with registration/serial number, and their warranty terms (i.e., length of warranty, start date, type (limited, extended, standard)

· Warranty approach;

· Customer process for warranty process

· Questions

· Registration process

· defects,

· problems,

· repetitive issues

COLAR Ground Ops Maintenance

APPENDIX A - Base Period

Kit shall include the following items:

1) 12 oz. Ballpeen Hammer (1)

2) 3⁄4" Plastic/Brass Hammer (1)

3) Firing Pin Protrusion Gauge (1)

4) 1⁄2" Square Drive Torque Wrench (1)

5) Shop Apron (1)

6) Vise Jaw Set (1)

7) Parts Boxes (2)

8) Bench Mat (1)

9) 101⁄2" Long, 1⁄2" Square Drive Handle (1)

10) Magna-Tip® #81 Handle (1)

11) Magna-Tip® Stubby Handle (1)

12) Snap Ring Pliers (1)

13) Barrel Nut Alignment Gauge (1)

14) 5.56mm (.223) Headspace Gauge (1)

15) #250 Chamber Mirror (1)

16) Cleaning Rod Small Arms

(w/Adapter) (6 pcs.)

17) Combination Wrench (1)

18) Roll Pin Punches (5)

19) 9⁄64"AllenBit & Socket Drive Adapter (1)

20) Roll Pin Holders

(Starter/Setter Punches) (5)

21) Bolt Catch Pin Punch (1)

22) Starrett 1⁄8" Punch (1)

23) Taper Pin Starter (1)

24) Starrett 1⁄4" Punch (1)

25) Starrett 5⁄32" Center Punch (1)

26) Pivot Pin Detent Depressor (1)

27) Pivot Pin Detent Installation Tool (1)

28) .223 Rem. Broken Shell Extractor (1)

29) 185-2 & 185-10 Hex Bits (1 ea.)

30) 445-6 Bit (1)

31) RED Bit (1) used on the left side of the pivot pin.

32) LB Bit (1) used on the butt plate screws.

33) A1 Sight Tool (1) & A2 Sight Tool (1)

34) 3⁄8" Square Drive Torque Wrench (1)

35) Custom Tool Case (1)

· Tough Tote Horizontal Wheeled Case

· Kit shall contain all necessary tools and equipment for the repair of communications equipment

· Wrench shall be able to be used on any AR-15 weapon

· Wrench shall be able to be used on any AR-15 weapon

· Tool shall be able to be used on any AR-15 weapon

· Tool shall be able to be used on any AR-15/M-16 weapon

· Wrench shall be able to be used on any AR-15/M-16 weapon

· Tool shall be able to be used on any AR-15 weapon

· Clamp shall be compatible with both the AR-15 and the M-16 weapons

· Poster shall show all parts/pieces of the M4 Carbine weapon

Kit shall include the following:

· Armorers Action Block Kit

· Lower Receiver Vise Block

· Heavy Duty Combination Armorer's Wrench

· Barrel Vise Jaw Blocks

· Drift Punch Set

· Rifle Cleaning Kit

· .223 Go/No-Go/Field Headspace Gauges

· Firing Pin Protrusion Gauge

· A1 and A2 Sight Tools

· Receiver Push Pin Tool

· 200 page M16 A2 Marine Corp. Technical Manual

· M16 A1 Technical Manual

· Tetra Gun Care Kit

· 2 complete spring packages (with carbine & rifle buffer springs), and an assortment of pins, detents and caps for fast and foolproof assemblies and installations

· Shall be rated for 2,000 lbs

· 12" tires

· Rated to 2000lbs per Skate

· Minimum of 24” X 12”

· Minimum of 1” in Depth

· Utilizing a minimum of 3/8 inch plate

· Rated up to 4,000 lbs

· Mobile end units with height Adjustment up to 58 inches

· 6" hard casters

· Adjustable arms

· Adjustable front yoke

· 4 wheels

· 2,000 lbs limit

(https://www.gsaadvantage.gov/advantage/catalog/product_detail.do?gsin=11000000928084)

COLAR Ground Ops Maintenance

APPENDIX B - Option A

HOFFMAN NVGs TEST BENCH ANV

· ANV-120 NVG Bench

· 12 inch integrating sphere

· Laboratory grade instrument with complete system calibration

· Nearly all NVG types can be tested with separate custom adapters

Hoffman NVG TEST BENCH - ANV-20/20 NVD INFINITY FOCUS SYSTEM

· The ANV-20/20 is a compact, portable system designed to provide the NVD user with an accurate means of performing infinity focus and mechanical alignment.

Hoffman Engineering NVD Equipment (kit)

· ANV-110-DQ Center Resolution Peripheral, 1 EA

· ANV-110-GE Signal to Noise Gain Equivalent Background, 1 EA

· ANV-126A-001 Tester, 2 EA

· ANV-126-085 Calibration, 1 EA

· Tool Kit P/N 9T1001, 2 KT

· Purge Kit P/N 9T1002, 2 KT

· * PVS-7, PVS-14, and ANVS-9 adapters, 1 KT

Mobile Column Lifts (set of 4)

Column capacity:18,000 lbs.

System capacity:108,000 lbs.

Min column height:97-1/2"

Max column height:140-1/2"

Lifting height:71-1/2"

Overall length:47-1/2"

Overall width:44"

COLAR Ground Ops Maintenance

APPENDIX C - Option B

15T / COLAR / Hoist Requirements

APPENDIX D - Option C

15T / COLAR / Hoist Requirements

APPENDIX E - Option D

· Shall support all aircraft vibration test and balancing requirements – present and future

· Minimum requirements include:

· SOFTWARE BELL-412, BELL 212, AS-555, BK-117 AND BO-105

· VXP ACQUISITION UNIT (AU),

· VXP DISPLAY UNIT (DU),

· SOFTWARE, AND ASSOCIATED CARRY-ON KIT AND SENSORS.

· THE VXP SYSTEM INTERFACES TO VIBRATION AND TACHOMETER SENSORS LOCATED THROUGHOUT THE AIRCRAFT AND ADDITIONALLY TO THE OPTIONAL FASTRAK™ OPTICAL TRACKER FOR MAIN ROTOR BLADE TRACKING.

· ANV-120 NVG Bench

· 12 inch integrating sphere

· Laboratory grade instrument with complete system calibration

· Nearly all NVG types can be tested with separate custom adapters

· The ANV-20/20 is a compact, portable system designed to provide the NVD user with an accurate means of performing infinity focus and mechanical alignment.

· 3,200PSI

· 50' Hose

· Trigger gun and wand

· Soap/chemical nozzle injector system

· 4 color-coded QC spray nozzles

· 1 color-coded QC chemical nozzle

· Approx. Dimensions (LxWxH): 425mm x 285mm x 380mm

· Approx. Weight: 9.35 lbs.

· Shall be able to securely mount your helicopter while performing routine maintenance or repairs

· Shall be able to rotate and tilt your helicopter for the best working angle

· Shall be able to provide a temporary load for field servicing and testing 28.5 volt ground power units

· 300A continuous load

· 1500A decreasing load

· Timer bypass switch

· Easy-to-read meters

15T / COLAR / Hoist Requirements

APPENDIX E - Option D

Model 05-7008-1100 (or equivalent)

HYDRAULIC Power Unit Tester Light Duty 25 foot hoses

· Dual system crossover check

· Dual system 16 Return filter with clogging indicator (10 micron nominal)

· Pyrometer

· 18" high platform

· Hourmeter

· Reservoir overflow return hose

· Protective cover

· Fluid Type: MIL-H-5606

· Pressure Level: 1750 PSI

· Flow: 6 Gallons Per Minute

· Reservoir Capacity: 10 Gallons

· Base Area 11x6”

· 4 Ton press tonnage

· Work area width: 9”

· Working distance (max): 12”

· Working distance (min): 4”

· Engine: 3 Cylinder Diesel, 904CC Indirect Injection

· Seating Capacity: 4

· Transmission: Automatic

· On Demand All Wheel Drive

· Dual Arm Suspension Front and Rear

· 2” rear receiver with 2000lb towing capacity

· 1000lbs Gas Assist Rear Dump Box with lock and ride system

· Wheels: 14” All Terrain Tires

· Color: Green

15T / COLAR / Hoist Requirements

APPENDIX F - Option E

· Wire twisters

· Wire twisters

· Tone Generator Filt

· Accurately tests cable pin configuration

· Tone indicator identifies faulty cables

· For cables up to 984’ long

· JACK, DOLLY-TYPE, HYDRAULIC: 10-TON CAPACITY

· Pot Mount Adaptor

· Handheld metal bender

· Bend Locating Gauge - allows any number of parts to be identically duplicated

· Angle Stop - precisely determines degree to bend

· Locking Pin - securely clamps material to ensure safety and accuracy

· Center Pin - cam action provides one radius setup plus mount for additional tooling

· Holding Pin - holds material in place to provide accurate bends.

· Table size(L x W)(mm): 320 x 1,000

· Maximum distance from spindle axis to table surface(mm): 825

· Maximum table longitudinal travel: 1,100

· Maximum wheelhead cross travel(mm): 370

· Maximum wheelhead vertical travel(mm): 650

· Feed on vertival feed handwheel (mm):

· Per grad.: 0.005

· Per rev.: 0.5

· Wheel size (mm): 350 x 40 x 127

· Spindle speed (r/min): 1,440

· Motors total power(kw): 9.17

· Wheel spindle motor (kw): 5.5

· Oil pump motor (kw): 3

· Parallelism of machining surface to reference surface (mm): 0.005/300

· Surface roughness: 0.63

· Net weight: 3,100kg

· Gross weight: 3,600kg

· Packing dimensions (L x W x H): 230 x 170 x 270cm

· Table size(L x W)(mm): 320 x 1,000

· Maximum distance from spindle axis to table surface(mm): 825

· Maximum table longitudinal travel: 1,100

· Maximum wheelhead cross travel(mm): 370

· Maximum wheelhead vertical travel(mm): 650

· Feed on vertival feed handwheel (mm):

· Per grad.: 0.005

· Per rev.: 0.5

· Wheel size (mm): 350 x 40 x 127

· Spindle speed (r/min): 1,440

· Motors total power(kw): 9.17

· Wheel spindle motor (kw): 5.5

· Oil pump motor (kw): 3

· Parallelism of machining surface to reference surface (mm): 0.005/300

· Surface roughness: 0.63

· Net weight: 3,100kg

· Gross weight: 3,600kg

· Packing dimensions (L x W x H): 230 x 170 x 270cm

· Table size(L x W)(mm): 320 x 1,000

· Maximum distance from spindle axis to table surface(mm): 825

· Maximum table longitudinal travel: 1,100

· Maximum wheelhead cross travel(mm): 370

· Maximum wheelhead vertical travel(mm): 650

· Stand-alone metal cutting machine

· MODEL GXB-1000-WJ (or equivalent), SERIAL NUMBER 8187, HI-PRESSURE

· http://www.nsnlocator.com/nsnlocator/fsc-3449/6.html

· Support DC Aircraft Power Needs

· Shall be able to provide a temporary load for field servicing and testing 28.5 volt ground power units

· 300A continuous load

· 1500A decreasing load

· Timer bypass switch

· Easy-to-read meters

· 7.5T, GENERAL PURPOSE, WHEEL MTD

· Automatic refill on pressure pot

· A.S.M.E. coded

· Flourescent Lamp Lighting exterior.

· 24" Cotton Lined Gloves

· 40 lb. Media Capacity Pressure Vessel

· Automatic Refill Pressure Vessel

· 14 and 16 gage Steel

· 115 Volt Operation

· 30 cfm compressed air Consumption

· Overall Dimensions: 67" x 51"W x 38"

· Working Dimensions: 16-24" H x 46" W x 24" Blasts 3 to 5 times faster than a siphon fed sandblaster.

· Compact, lightweight, and powerful pressure cleaner for professional use.

· 3 piston axial pump with brass water inlet and cylinder head

· Automatic pressure controlled shutdown upon trigger release

· Adjustable aluminum push handle

· Power : 240 volt

· Water flow rate : 500 I/h

· Pressure : 120 bar

· Maximum water feed temp. : 60 degrees C

· Trigger Gun - Extended Trigger Gun, easy press

· High Pressure Hose - 10 m

· Spray Lance - 550mm

· Dirt Blaster

· Triple Nozzle

· Electric Powered

· 60"L X 30"W Production Bench - Plastic Square Edge

· 5,000 lb capacity

· Plastic Laminate Square Edge

· Cleaning device shall use Ultrasound (from 20-400 kHz) and an appropriate cleaning solvent to clean delicate items

· Repair compound kit

· Adhesive used to repair cracks in compounds

· The instrument shall provide a comprehensive range of general purpose analog measurement facilities as well as advanced digital test options

· 2.7 GHz frequency range

· Sensitive receiver with built-in pre-amp for

· off air measurements

· -140 dBm (typical) DANL spectrum analyzer with 8 markers

· Tracking generator

· IQ generator for use with IQ CreatorTM

· GPIB, Ethernet, USB and RS-232 interfaces

· Software upgradeable in the field

· A precision simulator designed for testing aircraft weather radar and narrow pulse marine radar systems

· Automatic transmitter magnetron frequency tracking and digital readout

· Internal/external modulation for simulating target scintillation for turbulence detection radars

· Heterodyne monitor output

· Transmitter peak pulse measurements

· (EFF) Transmitter effective peak pulse power measurements

· Built in PRF generator and digital readout

· Video detector, frequency discriminator and spectrum analyzer outputs

· Contour boost capabilities

· General Mechanics Tool Kit

· Four drawers

· Includes the following:

· Tote bag

· Digital Multimeter w/Alligator Clips

· 2 Blade Multi-Tool

· Safety Glasses

· Electrical Connector Pliers (3/4” – 2 ½” Jaw Capacity)

· Wire Twist Pliers (12” Length)

· Flare Nut Wrench (3/4” and 1”)

· 3.8” Drive Sockets

· Tool Socket Wrench Screwdriver Attachment

· Brass Drift Punch

· Engine Test Stand

· Must be able to hold plane engines

· 3,200 lbs capacity

COLSOF / JSOP Requirements

APPENDIX G - Option F

Kramer VP-8X8 (or equivalent)

Computer Graphics Video Matrix Switcher

· Bandwidth − 400MHz (−3dB)

· Delayed Switching™ − 0−3.5s

· Control − RS−232, RS−485, Ethernet & IR

Clear One CONVERGE SR1212 (or equivalent)

Digital Matrix Mixer

· Automatic digital matrix mixer

· 20 Hz-22 kHz bandwidth for full-range audio response

· ALC & AGC keep participants’ audio balanced and consistent

Kramer SPK-WA511 (or equivalent)

On-Wall Speaker System

· A pair of powered two−way speakers designed for indoor wall mounting. The system accepts a line−level stereo input and amplifies it using a built−in amplifier and outputs a speaker signal to the passive speaker.

Panasonic PT-TW230U (or equivalent)

LCD Video Projector

· 2,500 lm

· WXGA

· HDMI Input

· 10 Watt built-in speaker

Panasonic PT-VW330 (or equivalent)

Projector

· 3,000 Im

· WXGA

· 1.6x Zoom

· Side-by-side/Picture-in-Picture

SAMSUNG MD55B (or equivalent)

55” LED Professional Display

· 55" Diagonal Size

· 120 Hz LED BLU

· 1,920 x 1,080 (16:9) Resolution

· 0.21(H) x 0.63(V)mm Pixel Pitch

· 1209.6 (H) x 680.4 (V) mm Active Display Area

PANASONIC UB-T880 (or equivalent)

Interactive Panaboard

· Dimensions (H x W x D): 51.97'' x 65.24'' x 4.6''

· Multi-touch capable

SAMSUNG ME55A (or equivalent)

55” LED Professional Display

· Resolution : 1920 x 1080

· 55" Diagonal Size

· Screen Size : 55"

· Brightness : 380nit

· Contrast Ratio : 5000:1

CRESTRON CP3 (or equivalent)

Control Processor

· 3-Series™ Control Engine — substantially faster and more powerful than other control systems

· Exclusive modular programming architecture

· Onboard 512MB RAM & 4GB Flash memory

· Expandable storage up to 1TB

· Rear panel memory card slot

· High-speed USB 2.0 host port

· Industry-standard Ethernet and Cresnet® wired communications

· XPanel with Smart Graphics™ computer and Web based control

· SNMP support

· One RS-232/422/485 COM port with hardware and software handshaking

· Two RS-232 COM ports with software handshaking only

· 8 IR/serial, 8 relay, and 8 Versiport I/O ports

· Native BACnet®/IP support[1]

· Installer setup via Crestron Toolbox™ or Internet Explorer®[2]

· Backwards compatible to run existing SIMPL programs

· Full Unicode (multi-language) support

· Increased network throughput and security

· Secure access though Active Directory integration or standalone account management

· Hardware level security using 802.1x authentication

· JITC certified model available for use in secure network environments

· IIS v.6.0 Web Server

· IPv6 ready

· Front panel USB computer console port

· 1-space rack-mountable

CRESTRON C3COM (or equivalent)

Control Card

· Provides three RS-232/422/485 COM ports for expansion of a 3-Series Control System™.

CRESTRON CEN-CI3-1 (or equivalent)

Card Interface

· A compact, rack-mountable enclosure designed to provide a versatile control interface and expansion solution using any single 3-Series™ Control Card.

ELITE SCREENS Electric106X (or equivalent)

Motorized Projection Screen

· 56x90”

· 110V/60Hz

· 160° wide viewing angle

· Infrared Remote Control

BEHRINGER EURORACK UB802 (or equivalent)

Ultra-Low Noise Design 8-Input 2-Bus Mixer

· 2 state-of-the-art, studio-grade IMP "Invisible" Mic Preamp with 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs

· Effective, extremely musical 3-band EQ on all channels

· 6 balanced high-headroom line inputs

· One post fader FX send per channel for external FX devices

· One stereo aux return for FX applications or as separate stereo input

· Clip LEDs on all mono channels

ROSSLARE AC-225 AYKR12B (or equivalent)

Advanced Scalable Network Access Controller

· Shall support 30,000 users with access rights for every panel, across optional 4092 modular doors in a system

· 20,000 FIFO (First In First Out) history event log, when offline

· Full intelligent logic interconnection of inputs, outputs, readers, and more

· Additional 8 inputs, 4 outputs with MD-IO84 IO expansion

· Additional 2 readers with 4 inputs, 4 outputs with MD-D02 2-Door expansion

· Supervised, 4 state end-of-line inputs

· Onboard TCP/IP networking (AC-225IP version)

· Panel supports both 1 door (In/Out) and 2 door (In/Out, In/In and Out/Out) configurations

· Real-time clock keeps time for up to 2 weeks without power. No batteries to replace

· Cable cut tamper detection function for readers, and cover tamper detection for the enclosure

FluidMesh VOLO 1200 Series (or equivalent)

ENDO Wireless Dual-Radio

· Designed and manufactured specifically for security, video-surveillance, and mission-critical condition monitoring applications. Can transmit the video streams coming from the cameras directly attached to it and dynamically route data packets coming from other units through the optimal network path

AUDIOTECHNICA PRO 44 (or equivalent)

Wired Boundary Microphone

· ELEMENT Fixed-charge back plate, permanently polarized condenser

· POLAR PATTERN Half-cardioid (cardioid in hemisphere above mounting surface)

· FREQUENCY RESPONSE 70-16,000 Hz

· OPEN CIRCUIT SENSITIVITY -25 dB (56.2 mV) re 1V at 1 Pa

· IMPEDANCE 100 ohms

· MAXIMUM INPUT SOUND LEVEL 114 dB SPL, 1 kHz at 1% T.H.D.

· DYNAMIC RANGE (typical) 86 dB, 1 kHz at Max SPL

· SIGNAL-TO-NOISE RATIO 66 dB, 1 kHz at 1 Pa

· PHANTOM POWER REQUIREMENTS 9-52V, 2 mA typical

· WEIGHT 2.4 oz (67 g)

· DIMENSIONS 2.87" (73.0 mm) maximum width,

· 3.56" (90.5 mm) maximum length,

· 0.59" (15.0 mm) height

· OUTPUT CONNECTOR TB3M-type

· CABLE 25' (7.6 m) long, with TA3F and XLRM-type connectors

EPIPHAN VGADVI Recorder (or equivalent)

Portable A/V Recorder

· Captures and combines audio, full HD video and SD video together. Quiet, portable recording for DVI, HDMI, VGA, Display Port, S-Video, and composite sources

Olympus SZ-15 Digital Camera (or equivalent)

16 Megapixel Camera (for reconnaissance teams)

· 16MP 1/2.3 CCD Sensor

· TRUEPIC III+ Image Processor

· 24x Optical Zoom, 25-600mm Equivalent

· 3.0"…