Addendum 003 - Valves - Solenoid Valves R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015391 Rev: 00

Description of Item: Solenoid Valves

Specification Section: 40 05 52

Deviations: See document NYCS000015373

INDEX:

Page 1: Cover Page Information

Page 2: Revision History and Approvals

Page 3: Tab 1 - NYCS000015417,CSS,Solenoid Valves,01.287

Pages 4-6: Tab 2 - NYCS000015423,ASCO,0.25in,24VDC,NC,BRASS,WH172289

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015417R00 Doc Title: NYCS000015417,CSS,Solenoid Valves,01.287.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015391, Solenoid

Valves,01.287:

L‐897,Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 40 05 52, Miscellaneous Valves.

Any exceptions and clarifications to the specification section above can be found in submittal:

NYCS000015373, Es and Cs, Section 40 05 52,01.287.

Pall has not taken any exceptions or clarifications relevant to the solenoid valves proposed.

2/2

SERIES

Features

• Welded core tube provides higher pressure ratings

• Reliable, proven design with high flows

• Small poppet valves for tight shutoff

• Wide range of elastomers for specialty service applications

• Mountable in any position

• Tapped mounting holes in body standard

Direct Acting, Normally Closed General Service Solenoid Valves

Brass or Stainless Steel Bodies 1/8" to 3/8" NPT

NC

Solenoid Enclosures

Nominal Ambient Temp. Ranges The nominal limitation of 32°F (0°C) is advisable for any valve that might contain moisture (water vapor).

AC: -13˚F to 131˚F (-25˚C to 55˚C) DC: -13˚F to 104˚F (-25˚C to 40˚C)

-13˚F to 131˚F (-25˚C to 55˚C) Note: Max ambient for explosionproof (EF) is 125˚F (52˚C) for AC, 131˚F (55˚C) for DC.

Optional: For AC, the max. ambient temperature is 140˚F (60˚C) with Class H coil (with or without prefix EF) Refer to Engineering Section for details.

Approvals CSA certified. UL listed, as indicated. Safety Shutoff Valves FM approved. Meets applicable CE directives.

Refer to Engineering Section for details.

Construction

Standard: Watertight, Types 1, 2, 3, 3S, 4, and 4X.

Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9.

(To order, add prefix “EF” to catalog number) See Optional Features Section for other available options.

4 2- W

AY

Valve Parts in Contact with Fluids

Body Brass Cast 304 Stainless Steel

Seals and Discs NBR or Cast UR

Core Tube 305 Stainless Steel

Core and Plugnut 430F Stainless Steel

Springs 302 Stainless Steel

Shading Coil Copper Silver

Watt Rating and Power Consumption Spare Coil Part No.

DC

Watts

AC General Purpose Explosionproof

Watts

VA

Holding VA Inrush AC DC AC DC

10.6 6.1* 16 30 238210 238510 238214 238514

18.6 9.1* 20 45 238210 238510 238214 238514

11.6 10.1 25 50 238610 238910 238614 238914

22.6 17.1 40 70 238610 238910 238614 238914

Standard Voltages: 24, 120, 240, 480 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz).

6, 12, 24, 120, 240 volts DC. Must be specified when ordering.

Other voltages available when required.

*On 50 hertz service, the rating for the 6.1/F solenoid is 8.1 watts, and the rating for the 9.1/F solenoid is 11.1 watts.

Electrical

Options Mounting bracket (suffix MB) Quarter-turn manual operator with screw slot (suffix MS) Panel mount (prefix GP for conduit; consult ASCO for other electrical connections) Vacuum service (suffix VVM, VVH; see Vacuum Section for more details.)

Oxygen service (suffix N) Silicone Free (suffix SF) Elastomers: Viton (suffix V), Ethylene Propylene (suffix E), Neoprene (suffix J), Teflon (suffix T), Low Temp NBR (suffix A) Note: For suffix A, Fluid temp. range -40˚F to 167˚F only for valves with 10.1, 17.1, 11.6, and 22.6 watt coils.

Refer to Engineering Section for fluid and temperature compatibility.4

LarkinD Highlight

LarkinD Highlight

LarkinD Text Box

NYCS000015423R00

LarkinD Text Box

WH172289

Part #: 8262H110V Viton, 24 VDC

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

8263 4

2-W

AY

Specifications (English units)

Pipe Size (ins.)

Orifice size

(ins.)

Cv Flow

Factor

Operating Pressure Differential (psi) Max. Fluid Temp. °F

Catalog Number

Const.

Ref.

UL

Listing

Watt Rating/ Class of Coil

InsulationMax. AC@131°F Max. DC@104°F Max. DC@131°F

Brass Stainless

Steel Air-Inert

Gas Water Lt. Oil @ 300ssu

Air-Inert Gas Water

Lt. Oil @ 300ssu

Air-Inert Gas Water

Lt. Oil 300ssu AC DC AC DC

NORMALLY CLOSED (Closed when de-energized), NBR Disc 1/8 3/64 0.06 2200 2200 1700 - - - - - - 140 - - 8262H175 � 1 � 10.1/F - 1/8 3/64 0.06 - - - 2000 2000 1725 1900 1900 1700 - 140 - 8262H176 � 1 � - 22.6/H 1/8 3/64 0.06 - - - 1500 1500 1500 1500 1500 1500 - 140 8262H089 � - 1 � - 22.6/H 1/8 3/64 0.06 2025 1710 825 965 745 720 920 700 675 140 140 - 8262H079 � 2 � 9.1/F 18.6/H 1/8 3/64 0.06 1500 1350 825 750 620 565 700 565 530 140 140 8262H096 � - 2 � 6.1/F 10.6/H 1/8 3/64 0.06 1500 1350 825 - - - - - - 140 - - 8262H173 � 2 � 6.1/F - 1/8 3/64 0.06 1500 1500 1500 1170 1145 945 1000 965 855 140 140 8262H099 � - 1 � 10.1/F 11.6/H 1/8 3/64 0.06 750 750 725 750 640 550 750 600 500 180 180 8262H001 8262H012 2 � 6.1/F 10.6/H 1/8 3/32 0.21 720 410 410 610 410 410 600 410 400 180 180 8262H277 8262H178 1 � 17.1/F 22.6/H 1/8 3/32 0.21 - - - 290 290 270 240 240 255 180 180 - 8262H177 1 � - 11.6/H 1/8 3/32 0.21 500 350 325 295 210 205 285 200 195 180 180 8262H011 - 2 � 9.1/F 18.6/H 1/8 3/32 0.21 370 330 190 235 160 160 215 150 145 180 180 8262H014 8262H015 2 � 6.1/F 10.6/H 1/8 1/8 0.35 500 380 355 275 275 235 250 250 225 180 180 8262H105 8262H174 1 � 17.1/F 22.6/H 1/8 1/8 0.35 340 300 215 - - - - - - - 180 - 8262H179 1 � 10.1/F - 1/8 1/8 0.35 275 260 195 165 130 130 155 120 120 180 180 8262H016 - 2 � 9.1/F 18.6/H 1/8 1/8 0.35 185 180 120 130 110 95 120 100 90 180 180 8262H002 8262H006 2 � 6.1/F 10.6/H 1/4 3/64 0.06 2200 2200 1700 1170 1145 945 1000 965 855 140 140 - 8262H214 � 3 � 10.1/F 11.6/H 1/4 3/64 0.06 1500 1500 1500 1170 1145 945 1000 965 855 140 140 8262H200 � - 3 � 10.1/F 11.6/H 1/4 3/64 0.06 1500 1500 1500 1500 1500 1500 1500 1500 1500 140 140 8262H107 � - 3 � 17.1/F 22.6/H 1/4 3/64 0.06 - - - 2000 2000 1725 1900 1900 1700 - 140 - 8262H181 � 3 � - 22.6/H 1/4 3/64 0.06 1500 1350 825 750 620 530 700 565 495 140 140 8262H106 � 8262H180 � 4 � 6.1/F 10.6/H 1/4 3/64 0.06 750 750 725 750 640 550 750 600 500 180 180 8262H019 8262H080 4 � 6.1/F 10.6/H 1/4 3/32 0.21 720 410 410 610 410 410 600 410 400 180 180 8262H109 8262H183 3 � 17.1/F 22.6/H 1/4 3/32 0.21 590 410 410 290 290 270 240 240 225 180 180 8262H108 8262H182 3 � 10.1/F 11.6/H 1/4 3/32 0.21 500 350 270 295 210 205 285 200 195 180 180 8262H021 - 4 � 9.1/F 18.6/H 1/4 3/32 0.21 370 330 160 235 160 160 215 150 145 180 180 8262H020 8262H086 4 � 6.1/F 10.6/H 1/4 1/8 0.35 500 380 355 275 275 235 250 250 225 180 180 8262H110 8262H185 3 � 17.1/F 22.6/H 1/4 1/8 0.35 340 300 215 130 125 115 110 105 100 180 180 8262H232 - 3 � 10.1/F 11.6/H 1/4 1/8 0.35 340 300 215 - - - - - - 180 - - 8262H184 3 � 10.1/F - 1/4 1/8 0.35 275 260 150 165 130 120 155 120 115 180 180 8262H023 - 4 � 9.1/F 18.6/H 1/4 1/8 0.35 185 180 90 130 110 90 120 100 85 180 180 8262H022 8262H007 4 � 6.1/F 10.6/H 1/4 5/32 0.52 300 210 210 135 135 135 115 115 115 180 180 8262H112 8262H187 3 � 17.1/F 22.6/H 1/4 5/32 0.52 210 200 145 65 63 63 55 54 54 180 180 8262H202 - 3 � 10.1/F 11.6/H 1/4 5/32 0.52 210 200 145 - - - - - - 180 180 - 8262H220 3 � 10.1/F - 1/4 5/32 0.52 150 140 100 95 75 75 85 72 70 180 180 8262H113 - 4 � 9.1/F 18.6/H 1/4 5/32 0.52 100 100 55 72 60 55 67 53 52 180 180 8262H111 8262H186 4 � 6.1/F 10.6/H 1/4 7/32 0.73 125 125 125 70 70 70 65 65 65 180 180 8262H114 8262H188 3 � 17.1/F 22.6/H 1/4 7/32 0.73 100 100 100 35 35 35 30 30 30 180 180 8262H208 - 3 � 10.1/F 11.6/H 1/4 7/32 0.73 100 100 100 - - - - - - 180 - - 8262H226 3 � 10.1/F - 1/4 7/32 0.73 55 54 40 38 33 31 35 30 28 180 180 8262H013 8262H036 4 � 6.1/F 10.6/H 1/4 9/32 0.88 90 90 90 53 50 47 48 46 44 180 180 8262H212 8262H230 3 � 17.1/F 22.6/H 1/4 9/32 0.88 65 75 60 25 25 22 22 22 20 180 180 8262H210 - 3 � 10.1/F 11.6/H 1/4 9/32 0.88 65 75 60 - - - - - - 180 - - 8262H189 3 � 10.1/F - 1/4 9/32 0.88 36 36 33 27 23 21 24 22 20 180 180 8262H090 8262H038 4 � 6.1/F 10.6/H 3/8 1/8 0.35 500 380 355 275 275 160 250 250 150 180 180 8263H115 8263H191 5 � 17.1/F 22.6/H 3/8 1/8 0.35 340 300 215 130 125 85 110 105 75 180 180 8263H232 - 5 � 10.1/F 11.6/H 3/8 1/8 0.35 340 300 215 - - - - - - 180 - - 8263H190 5 � 10.1/F - 3/8 1/8 0.35 275 260 140 165 130 110 155 120 105 180 180 8263H003 - 6 � 9.1/F 18.6/H 3/8 1/8 0.35 185 180 90 130 110 80 120 100 75 180 180 8263H002 8263H330 6 � 6.1/F 10.6/H 3/8 5/32 0.52 300 210 195 135 135 100 115 115 90 180 180 8263H118 8263H193 5 � 17.1/F 22.6/H 3/8 5/32 0.52 210 185 100 65 63 50 55 54 44 180 180 8263H200 - 5 � 10.1/F 11.6/H 3/8 5/32 0.52 210 185 100 - - - - - - 180 - - 8263H331 5 � 10.1/F - 3/8 5/32 0.52 150 140 80 95 75 75 85 72 70 180 180 8263H117 - 6 � 9.1/F 18.6/H 3/8 5/32 0.52 100 100 50 72 60 55 67 53 52 180 180 8263H116 8263H192 6 � 6.1/F 10.6/H 3/8 7/32 0.73 125 100 100 70 70 70 65 65 65 180 180 8263H206 8263H332 5 � 17.1/F 22.6/H 3/8 7/32 0.73 100 86 70 35 35 35 30 30 30 180 180 8263H124 - 5 � 10.1/F 11.6/H 3/8 7/32 0.73 100 86 70 - - - - - - 180 - - 8263H195 5 � 10.1/F - 3/8 7/32 0.73 55 54 29 38 33 31 35 30 28 180 180 8263H119 8263H194 6 � 6.1/F 10.6/H 3/8 9/32 0.88 100 85 70 53 50 47 48 46 44 180 180 8263H210 8263H333 5 � 17.1/F 22.6/H 3/8 9/32 0.88 65 63 47 - - - - - - 180 180 8263H125 8263H197 5 � 10.1/F - 3/8 9/32 0.88 35 32 21 27 23 21 24 22 20 180 180 8263H054 8263H196 6 � 6.1/F 10.6/H

� Cast UR disc supplied as standard, limits min. ambient temp. to 32˚F (0˚C); � = General Purpose Valve, � = Safety Shutoff Valve5

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

Highlight

8263 4

2-W

AY

Dimensions: inches (mm)

Const.

Ref. H K L P W ins 3.05 1.71 1.19 2.69 1.95 mm 77 43 30 68 50 ins 2.85 1.60 1.19 2.50 1.69 mm 72 41 30 63 43 ins 3.12 1.79 1.56 2.76 1.95 mm 79 45 40 70 50 ins 2.96 1.72 1.56 2.60 1.69 mm 75 44 40 66 43 ins 3.20 1.79 1.88 2.77 1.95 mm 81 45 48 70 50 ins 3.03 1.72 1.88 2.60 1.69 mm 77 44 48 66 43

ANPT PIPE THREAD

(2 PLACES)

K

P

L

H

W

Const. Ref. 1-6

Mounting Dimensions

.34 [9]

.87 [22.2]

.87 [22.2]

.75 [19]

.57 [14]

.81 [20.6]

.30 [8]

.59 [15]

.69 [18]

FLOW

M5 THREAD

.30 [7.6] MIN.FULL

THREAD DEPTH

2 HOLES FOR

MOUNTING

MOUNTING

HOLES

MOUNTING

HOLES

FLOW

M5 THREAD

.24 [6] MIN. FULL

THREAD DEPTH

2 HOLES FOR

MOUNTING

MOUNTING

HOLES

MOUNTING

HOLES

FLOW

M5 THREAD

.25 [6.4] MIN.FULL

THREAD DEPTH.

2 HOLES FOR

MOUNTING

MOUNTING HOLES

MOUNTING

HOLES

Const. Ref. 1, 2 (1/8" Pipe)

Const. Ref. 3, 4 (1/4" Pipe)

Const. Ref. 5, 6 (3/8" Pipe)

Note: Mounting holes will accept a standard #10-32 machine screw.

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Line

LarkinD Line

LarkinD Line

Line