Addendum 003 - Major Electrical Comp R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015061 Rev: 01

Description of Item: Major Electrical Components

Specification Section: 40 67 00

Deviations: See document NYCS000015381

Cover Page Information Revision History and Approvals

Tab 1 - NYCS000015453,CSS,Electrical Components,01.287

Tab 2 - Numatics 501 Manifold & G3 PLC IO R00

Tab 3 - PULS 24VDC Redundant Power Supply Component Cuts R00

Tab 4 - Allen-Bradley 1489 Circuit Breaker Cut Sheet R00

Tab 5 - Allen-Bradley 5x20mm Fuse Block Cut Sheets R00

Tab 6 - Allen-Bradley 1492-J Terminal Block Cut Sheets

Tab 7 - Allen-Bradley 700 HL 24VDC SPDT Relay Cut Sheet R00

Tab 8 - Allen-Bradley 800T Panel Indicator Light Cut Sheets R00

Tab 9 - Watlow Temperature Limit Controller Cut Sheet R00

Tab 10 - Hoffman 74x72x18 NEMA-4 Enclosure Cut Sheet R00

Tab 11 - Hoffman 30x30x8 SS NEMA-4X Enclosure Cut Sheet R00

Tab 12 - Hoffman 36x36x8 SS NEMA-4X Enclosure Cut Sheet R00

Tab 13 - Hoffman 36x36x10 SS NEMA-4X Enclosure Cut Sheet R00

INDEX:

Page 1:

Page 2:

Page 3:

Pages 4-38:

Pages 39-110:

Pages 111-234:

Page 235:

Pages 236-240:

Pages 241-246:

Pages 247-250:

Pages 251-255:

Pages 256-259:

Pages 260-263:

Pages 264-266:

Pages 267-269:

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015453R00 Doc Title: NYCS000015453,CSS,Electrical Components,01.287 R01.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015061, Electrical Components, 01.287:

L‐897, Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 40 67 00, Control Panels, Enclosures and Panel Instruments.

Any exceptions and clarifications to the specification section above can be found in submittal NYCS000015381, L‐897, Section 40 67 00, Es and Cs,01.287.

Pall has taken exceptions and clarifications relevant to the electrical components proposed.

Solenoid Pilot Actuated Valves 501 Series w w w . n u m a t i c s . c o m

HomR Rectangle

HomR Text Box

NUMATICS 501 SERIES VALVES

WITH 24VDC SOLENOIDS

Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant impact on pneumatic innovation as well as pneumatic and motion control technology. Our company has an extensive history of generating innovative concepts and technological breakthroughs. Many of today’s standard features in pneumatic technology were industry firsts from

Numatics. We continue our innovative approach to product development by developing electric motion control solutions and enhancing our embedded Fieldbus and I/O products to continually meet and solve our customer’s application requirements.

Today Numatics is proud to be a part of the Industrial

Automation Division of

Emerson Electric Co.

Emerson (NYSE:EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets through its network power, process management, industrial automation, climate technologies, and appliance and tools businesses. For more information, visit www.Emerson.com.

We are committed to providing you with an unmatched level of customer service, quality, and reliability.

If you cannot locate the specific product for your application or need additional product specifications, visit www.numatics.com or call 888-686-2842. Numatics Express orders cannot be canceled or adjusted once entered.

Saturdays, Sundays, and Holidays are excluded.

†As industry requirements change, Numatics reserves the right to modify the contents of this catalog and program without notification. Updates on this program can be obtained from the Numatics website www.numatics.com or by calling 888-686-2842, or by contacting your local Numatics representative or distributor and referencing the Numatics Express program.

*SentronicD Proportional Valves, CGT Compact Slides, NR Series Rodless and Air Bellows are limited to orders up to 5.

**A Series Large Bore NFPA, ASP Series Steel Body NFPA and G Series Guide Rail Rodless are limited to orders up to 5.

Numatics Express Shipping Program guarantees† product shipment in two, three or five business days. Unlike most traditional quick ship programs, the Numatics Express Shipping Program includes the most comprehensive offering in the industry. This program encompasses the range and options that you require!

Numatics is committed to offering you the highest level of customer service, quality and performance.

Numatics Express 2Day shipping program guarantees† product shipment in two business days. The program includes the most popular valve, air preparation and actuator products and includes applicable switches and mounting accessories.

Numatics guarantees† to ship any order received before 3 pm EST for up to 10 2Day products* in two business days.

Numatics Express shipping program offers a 3Day shipping program that guarantees† product shipment of a fully assembled and tested valve manifold in 3 business days. The program includes the most popular manifold configurations of the 2000 and Mark series valves:

• Sub D, Terminal Strip and Fieldbus Electronic Options

• Can be configured for DIN Rail Mounting and Muffled Exhaust

• Shipped complete and 100% tested

The 3Day Express shipping program enables you to create a 2 to 8 station manifold assembly complete with any combination of valves, regulators, and blank stations that can be configured from the valve model charts in this catalog.

Numatics guarantees† to ship any order received before 3 pm EST for up to 5 manifold assemblies configured from this catalog in three business days or Numatics pays the shipping cost.

We are pleased to expand Numatics Express to include a broad range of products in a 5Day shipping program. Numatics guarantees† to ship up to 10 of any 5Day product** for orders received before 3 pm EST in 5 business days or Numatics pays the shipping cost.

i

Since 1945, Numatics has emerged as the prominent specialist in developing and manufacturing pneumatic and fluid power components for a widely diverse field of automated industry. From idea to implementation, leading engineers choose Numatics as their single source for:

• Quality Fluid Power components

• Technologically advanced design resources

• Quick response time in delivery and service from around the world

Welcome to the World of Fluid Automation...

CAD Modeling Save critical development time with the most innovative CAD configuration program in the pneumatic component industry. Numatics in 3D eliminates the time consuming process associated with designing components from scratch based on information found in conventional paper catalogs.

The models are available in 85 different native CAD formats in 2D drawings and 3D models, including all the popular formats including Catia, I-DEAS, Pro/Engineer, SolidWorks, Unigraphics and more.

Numasizing® Developed by Numatics, Numasizing® offers a whole new level of fluid power system optimization. Compare large amounts of component and process data against user objectives and industry benchmarks for the best possible size, pneumatic pressure, actuator stroke velocities and other part and process variable determinations.

ii

Table of Contents

501 Series Features and Benefits 2 Technical and Operating Data 3 How to Order 4 Valve Regulator/Plug-in Assembly 5 Sandwich Pressure Regulator Dimensions 6 Manifold Assemblies 7 Plug-In Valve Mounted 7 Sandwich Shut Off Block 8 Blank Station Plate Kit 8 Speed Control Kit 8 DIN Rail Clamp Kit 9 Blocking Disc Kit 9 End Plate Kits 9 Manifold Assembly 10 Internal/External Pilot Selection 11

Assembly Kits How to Order 12 25 or 37 Pin Sub-D 13 1-32 Terminal Strip 14 19 Pin Round Connector 14

580 Series Features and Benefits 18 DeviceNet™ 19 Ethernet 20 Profibus DP 21

PROFINET 22

EtherCAT® 23 EtherNet/IP™ DLR 24 Dimensional Drawing - 580 Fieldbus Communication Assembly 25 How to Order - 580 Assembly Kit & 580 Electronics 26 How to Order Complete 580 Manifold Assemblies 27 Cables and Connectors 28-33

G3 Electronics Features and Benefits 36-37 G3 Platform Distribution Options 38-39 DeviceNet™ 40 Ethernet 41

PROFIBUS DP 42

PROFINET 43

CANopen® 44 DeviceLogix™ 45 Ethernet POWERLINK® 46 EtherCAT® and EtherNet/IP™ DLR 47-48 I/O Modules 49-51 Sub-Bus Modules 52-53 Miscellaneous Modules & Accessories 54-55 Dimensional Drawing - G3 Fieldbus Communication Assembly 56-57 How to Order Complete G3 Manifold Assemblies 58 How to Order - G3 Assembly Kit & G3 Electronics 59-60 Cables and Connectors 61-73 Example Sub-Bus Layout and Cabling 74

HomR Rectangle

HomR Line

HomR Line

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

501 Series – Directional Control Valve Platform

Featuring Higher Flow in a Compact Valve Package

Commissioning Capabilities

• Solenoid air pilot actuated

• Low wattage .8 wall for DC application

• DC solenoids Polarity insensitive with surge suppression

• Plug together circuit boards eliminate internal wiring

• Integral recessed gaskets

• IN Fittings to accommodate various tube sizes

• Simple conversion from internal to external pilot

• IP65 Certified

Sandwich and Manifold Accessories

• Pressure Regulators for supply pressure control at individual valve

• Speed control to control exhaust flow allows for control of actuator extend or retract speed

• Shut off block for individual valve to be isolated from pressure supply during operation and repair

• Mid Station Supply Manifold block allows for multiple pressure zones

(with blocking discs) or additional air supply to a manifold

Fieldbus Electronics Compatible

• G3 Fieldbus Electronics

• Graphic Display for easy commissioning, visual status & diagnostics

• 32 valve solenoids per manifold

• Easy distribution of additional manifolds through Sub-Bus communication

• One Node supports up to 16 I/O modules

• Available with Auto Recovery Module (ARM) which allows configuration information to be saved and reloaded to replacement module automatically

• 580 Fieldbus Electronics

• Graphic Display for easy commissioning, visual status & diagnostics

• 32 valve solenoids per manifold

HomR Rectangle

HomR Line

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

Performance Data

Operating Data

Valve Data Min. Max.

Pilot Pressure Range 29 PSI (2 Bar) 115 PSI (8 Bar)

Valve Operating Pressure Range 28" HG Vacuum 115 PSI (8 Bar)

Ambient Temperature Range - 10°C (- 14°F) 50 °C (122 °F)

Proprietary

Valve Flow Data Cv NL/m

(6 - 5 Bar)

5/2, Double Solenoid & Single Solenoid, Spring Return 0.46 460

2X 3/2 NC-NC 0.45 450

2X 3/2 NO-NO 0.45 450

Double Solenoid, 3 pos. 4 way, Spring Centered- Open to 4 and 2 in center

0.46 460

Double Solenoid, 3 pos. 4 way, Spring Centered - Open Center 0.46 460

Double Solenoid, 3 pos. 4 way, Spring Centered - Closed Center

0.46 460

All Solenoids Are Continuous Duty Rated 24 VDC

Power (Watts) 0.8

Response Time (ms) Rubber Seal

Energize Deenergize

5/2, Single Solenoid, Spring Return 14 29

5/2, Double Solenoid 11 N/A

5/3 Spring Centered 15 20

2x3/2 NC 18 18

2 X3/2 NO 18 18

3 1 5

2 4

3 1 5

2 4

3 1 5

2 4

3 1 5

2 4

1214 24

3 1 5 single solenoid air pilot 2 position 4-way double solenoid air pilot 2 position 4-way double solenoid air pilot 3 position 4-way open center double solenoid air pilot 3 position 4-way closed center double solenoid air pilot 3 position 4-way pressure center

12 142 4

3 1 5

12 142 4

3 1 5 double solenoid 2 position dual 3-way

“14” & “12” NO

double solenoid 2 position dual 3-way

“14” & “12” NC

(B)

(A)

(B)(A) 2 4

3 1 5

(EB)(P)(EA)

(B)

(A)

(B)(A) 2 4

3 1 5

(EB)(P)(EA)

(B)

(A)

(B)(A) 2 4

3 1 5

(EB)(P)(EA)

(B)

(A)

(B)(A) 2 4

3 1 5

(EB)(P)(EA)

(B)

(A)

(B)

(A)

(EB)

(P)

(EA)

(B)

(A)

(B)

(A)

(EB)

(P)

(EA)

(B)

(A)

(B)

(A)

(EB)

(P)

(EA)

single solenoid air pilot 2 position 4-way double solenoid air pilot 3 position 4-way open center double solenoid air pilot 2 position dual 3-way

“14(A)” & “12(B)” NO

double solenoid air pilot 2 position dual 3-way

“14(A)” & “12(B)” NC

double solenoid air pilot 2 position dual 3-way

“14(A)”NC, “12(B)” NO

double solenoid air pilot 3 position 4-way closed center double solenoid air pilot 2 position 4-way

HomR Rectangle

Rectangle

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

4501 A B

Product Series 501 = 11 mm Valve

Revision A = Initial Release

Actuation 2 = Rubber Packed

Valve Type

Function

B = Solenoid Pilot with Flush Non-Locking Override

1 = 2 Position 4-Way (5/2), Spring Return 4 = 2 Position 4-Way (5/2), Dual Solenoid 5 = 3 Position 4-Way (5/3), Open Center, Dual Pressure 6 = 3 Position 4-Way (5/3), Blocked Center 7 = 3 Position 4-Way (5/3), Open to A & B in Center

D = Dual 3-way, A normally closed - B normally closed N = Differential Air Return w/o Spring

A = Dual 3-way, A normally open - B normally open

Voltage

Options A00 = Standard (No Options) 11B = Flush Locking Manual Override 11M = Without Manual Override

F1 = 24 DC

Electrical M = Plug-in, w/ Light, VDC

Port Size 0 = No Port Size

2 0 A00 F1R M

5501 A S

Product Series 501 = 11 mm Valve

Revision A = Initial Release

Product Type R = Regulator

Regulator Type S = Single Reg. - Pressure to Port 1

Interface 1 = Proprietary

Options A00 = Standard (No Options) 12H = Regulator Less Gauge 18V = Regulator with Gauge in Offset Port

Wiring Option J = Plug-In, Receptacle Assembly

Gauge Type

1 = PSI

Pressure Range

5 = 10 - 115 PSIG

R 1 A00 1R J 0

How to Order

Valves

Regulators

Sandwich Pressure Regulators

Type: RS Type RS

Single pressure from a single supply

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box

HomR Text Box 11B

HomR Text Box

USED TO ACTUATE ON/OFF BLOCK VALVES

HomR Polygonal Line

HomR Line

HomR Line

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box 18V

HomR Line

HomR Text Box

USE ON AIR POWERED

CHEMICAL TRANSFER

PUMPS

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

Valve Regulator / Plug-in Assembly

REGULATOR

VALVE

MOUNTING

R501A2B10MAOOF1

R501ARS51JA0010

H501AMM4BMA0010

HomR Rectangle

HomR Text Box

R501A2B10M11BF1

WITH FLUSH LOCKING

MANUAL OVERRIDE

HomR Text Box

H501AMS4BMA0010

MANIFOLD BASE ASSY:

4 VALVES PER BASE, M7 PORT SIZE, SINGLE Z-BOARD (SEE PAGE 7)

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

A

B

C D

F

E

Sandwich Pressure Regulator

Single Regulator

Dimensions: mm (Inches)

A B C D E F

139.1 (5.476)

82.5 (3.248)

60.7 (2.390)

59.5 (2.342)

(0.433)

5.5 (0.216)

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

S4501 A

Port Type H = Metric Thread

Product Series 501 = 11 mm Valve

K = Push-In Fittings

Revision A = Initial Release

Product Type

Mounting

M = Manifold Sub Base Z = Mid Station Supply

S4 = Manifold Sub Base, 4 Stations, Side Ports, Single Z-Board M4 = Manifold Sub Base, 4 Stations, Side Ports, Double Z-Board

Interface 1 = Proprietary

Options A00 = Standard (No Options)

Wiring Option M = Plug-In, Receptacle Assembly

D = 4 mm (5/32) (Push-In Fittings only)

2 = 1/4 (Push-In Fittings only) F = 6 mm (Push-In Fittings only)

Port Size B = M7 (Threaded only)

M 2 A00 1K 0M

How to Order

Manifold Assemblies A

B

C

H G

F E

D

J

K

Plug In Valve Mounted

Dimensions: mm (Inches)

A B C D E F G H J K

76.4 (3.008)

18.5 (0.728)

6.5 (0.256)

(1.890)

(1.653)

(1.181)

(0.709)

(0.236)

(1.850)

(4.134)

*Available with M4 mounting only

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box H

HomR Text Box B

HomR Text Box

TYPICAL MANIFOLD BASE ASSY FOR (4) VALVES

HomR Rectangle

HomR Text Box

MANIFOLD BASE

HomR Line

HomR Line

HomR Text Box

VALVE

HomR Line

HomR Polygonal Line

HomR Line

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

• Used to shut off pressure when mounted below valve.

• Allows easy maintenance without the need to shut off pressure to the entire manifold.

XE

XE

EB

(3)

(3)

EB

B (2)

(2) B

(1) P

P (1)

A (4)

(4) A

(5)

EA

EA

(5)

X

X

Sandwich Shut Off Block

Dimensions: mm (Inches)

A B C D

105.2 (4.142)

48.4 (1.905)

(0.866)

(0.905)

D

A

B

C

Part Number Description

R501AY428501001 Proprietary Sandwich Shut Off Kit

Dimensions: mm (Inches)

A B C

105.1 (4.138)

(0.433)

(0.591)

• Used to block off a manifold station for future use.

Blank Station Plate Kit

P501AB429685001

C B

A

Dimensions: mm (Inches)

A B C D

105.1 (4.137)

48.4 (1.905)

(0.866)

(0.433)

Part Number Description

R501AS428500001 Sandwich Speed Control

C

D B

A

Speed Control Kit

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

DIN Rail Clamp Kit

239-980

Port Type NPTF G Push In Push In

Port 1 3/5 X,XE 1 3/5 X,XE 1 3/5 X,XE 1 3/5 X,XE

Port Size 1/8 1/8 M7 1/8 1/8 M7 5/16 5/16 1/4 8 mm 8 mm 6 mm w/o Muffler, w/o DIN 8501AK429465001 G501AK429465009 K501AK429465003 K501AK429465011 w/o Muffler, w/DIN 8501AK429465002 G501AK429465010 K501AK429465004 K501AK429465012 w/Muffler, w/o DIN 8501AK429465005 G501AK429465013 K501AK429465007 K501AK429465015 w/Muffler, w/DIN 8501AK429465006 G501AK429465014 K501AK429465008 K501AK429465016

End Plate Kit - Threaded

Ports Part

1 P501AD431915001

3 P501AD431915002

5 P501AD431915003

1 + 3 P501AD431915004

1 + 5 P501AD431915005

3 + 5 P501AD431915006

1, 3, 5 P501AD431915007

Blocking Disc Kits

(Includes tag to label ports blocked)

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

Manifold Assembly

Dimensions: mm (Inches)

A B C D E F G H J K L M N P Q R S T U V W

(4.65)

(4.13)

(0.90)

32.3 (1.27)

7.1 (0.28)

(2.32)

76.4 (3.01)

(1.89)

12.2 (0.48)

(2.83)

55.6 (2.19)

41.1 (1.62)

18.5 (0.73)

15.9 (0.63)

6.5 (0.26)

14.3 (0.56)

31.2 (1.23)

43.2 (1.70)

55.2 (2.17)

67.2 (2.65)

82.3 (3.24)

D

E

D G

Q

P N

M

L

K

Ø5.3

B

F

C

H J

R B Ref.

A Ref.S T

U V

W

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

Internal Pilot External Pilot

Internal Pilot Supply Plug Location

For External Pilot Supply Plug Location

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

SERIES

Manifold Assembly How to Order

*NOTE: Maximum number of valve stations is determined by:

• The electrical connection type.

• The valve type - single solenoid valves up to the maximum solenoid outputs allowed by the electrical connection type (see chart above) or a combination of single and/or double solenoid valves not to exceed the maximum number of solenoid outputs allowed.

• Combination of all stations cannot exceed 32 solenoids.

Maximum Solenoid Outputs

32 22 32

Terminal Strip 25 Pin Sub-D

37 Pin Sub-D

16 32 32

19 Pin Round

G3 Fieldbus

Fieldbus

D501 A 3

Port Type

8 = NPTF

Product Series 501 = 11 mm Valve

M = 37 Pin Sub-D Connector

G = ISO228/1-G

K = Push-In Fittings

Revision A = Initial Release

Product Type

Electronics

V = Valve Manifold Assembly

J = 25 Pin Sub-D Connector

T = Terminal Strip 1-32 Q = 19 Pin Round Connector

Number of Valve Stations D = 4 H = 8 L = 12

T = 20 X = 24

P

1 Port Type ‘8’ + ‘G’ only available in Port Size 1/8

= 16 3 = 28 7 = 32

Options A00 = Standard (No Options)

MUF

DWM

= Muffler in End Plates DRM = DIN Rail Mount

14X = DIN Rail with MUF

D12 = External Pilot Supply from Port # 14

F06

= (14X) External Pilot Supply from Port # 14 and (DRM) DIN Rail Mount

D14

= (14X) External Pilot Supply from Port # 14 and (MUF) Muffler in End Plates

= (14X) External Pilot Supply from Port # 14, (MUF) Muffler in End Plates, and (DRM) DIN Rail Mount

End Plate Style V = Vertical

1 = 1/8 (NPTF and G Thread Only)

H = 8mm (5/16) (Push in Fittings Only)

End Plate Port Size - Supply and Exhaust

2 = 1/4 (Push In Fittings Only)

V 2 V A000 0K

0 = No Second Valve Series Second Valve Series Port Size

0 = No Second Valve Series Second Valve Series

8 = 580 Fieldbus (See page 15.)

3 = G3 Fieldbus (See page 33.)

VALVE

STATIONS 1 2 3 4 22/32

VALVE

STATIONS 1 2 3 4 22/32

VALVE

STATIONS 1 2 3 4 22/32

VALVE

STATIONS 1 2 3 4 22/32

25 or 37 Pin Sub-D, Terminal Strip and 19 Pin Round Connector

• Shaded components described by Assembly Kit model number designation.

• Each valve manifold station is listed in sequential order from left to right when facing the port side of the manifold as indicated.

Example Order - 501 Shown 25 Pin Sub-D K501AVJHG00VA00 Valve Station #1 R501A2B10MA00F1 Valve Station #2 R501A2B10MA00F1 Valve Station #3 R501A2B10MA00F1 Valve Station #4 R501A2B10MA00F1 Mounting #1 K501AMS42MA0010 Valve Station #5 R501A2B40MA00F1 Valve Station #6 R501A2B40MA00F1 Valve Station #7 R501A2B40MA00F1 Valve Station #8 R501A2B40MA00F1 Mounting #2 K501AMM42MA0010 Assembled

G3 | Communication Node and I/O 580 | Communication Node

Fieldbus Electronics

HomR Rectangle

Table of Contents G3 Electronics

Features and Benefits 2 G3 Platform Distribution Options 4 CANopen® 6 CC-Link IE Field™ 7 DeviceNet™ 8 EtherCAT® 9 EtherNet/IP™ 10 EtherNet/IP™ DLR 11 Ethernet POWERLINK® 12 Modbus® TCP/IP 13

PROFIBUS™ DP 14

PROFINET™ 15

I/O Modules 16 Input Modules - RTD & NAMUR IS 19 Sub-bus Modules 21 Miscellaneous Modules & Accessories 23 G3 Dimensions 25 G3 How To Order 30 501 Series 32 502 Series 35 503 Series 38 2002 R2 & 02 Series 40 2005 Series 43 2012 Series 45 2035 Series 47 ISO 15407-2 18mm Series 49 ISO 15407-2 26mm Series 51 ISO 5599/2 Series 53 Power Cables & Connectors 55 CANopen® and DeviceNet™ Cables & Connectors 58 CC-Link IE Field™ Cables & Connectors 59 EtherCAT® Cables & Connectors 60 EtherNet/IP™, EtherNet/IP™ DLR and Modbus® TCP/IP Cables & Connectors 61 Ethernet POWERLINK® Cables & Connectors 62 PROFIBUS™ DP Cables & Connectors 63 PROFINET™ Cables & Connectors 64 I/O Cables & Connectors 65 M23 19 Pin Cables & Connectors 68 Sub-bus Cables & Connectors 69

580 Series Features and Benefits 71 CANopen® 72 DeviceNet™ 73 EtherCAT® 74 EtherNet/IP™ 75 EtherNet/IP™ DLR 76 Ethernet POWERLINK® 77 IO-Link® 78

PROFIBUS™ DP 79

PROFINET™ 80

580 CHARM Node 81 580 Dimensions 82 580 How to Order 83 Power and Communication Cables & Connectors 8522

HomR Rectangle

ASCO NUMATICS™

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

Modbus is a registered trademark of Modbus Organization, Inc.

EtherNet/IP, DeviceNet and QuickConnect are trademarks of ODVA.

EtherCAT is a registered trademark of the EtherCAT Technology Group.

CANopen is a registered Community trademark of CAN in Automation e.V.

PROFIBUS and PROFINET are trademarks of Profibus Nutzerorganisation e.V.

Ethernet POWERLINK is a registered trademark of Bernecker + Rainer Industrie – Elektronik Ges.m.b.H.

CC-Link is a registered trademark and CC-Link IE Field is a trademark of the CC-Link Partner Association.

Easy, Robust ConnectionsHighly Distributable

Auto Recovery ModuleGraphic Display for Confi guration & Diagnostics

• 1/2 turn for faster I/O connections

• Backwards compatible with standard

M12 cables/connectors

• Meets the same IP/NEMA standards as M12/Micro cables/connectors

• Same cost as standard M12/Micro cables/connectors

• See the I/O Cables and Connectors section for cables with SPEEDCON® connector technology

*Numatics I/O with SPEEDCON® Technology

Supported Protocols

• CANopen®

• CC-Link IE Field™

• DeviceNet™

• DeviceNet™ w/

QuickConnect™

• EtherCAT®

• EtherNet/IP™

• EtherNet/IP™ DLR w/ QuickConnect™

• Ethernet POWERLINK®

• Modbus® TCP/IP

• PROFIBUS™ DP

• PROFINET™

G3 Fieldbus Communications Electronics Why use Numatics Fieldbus communication electronics?

Modular Reality...

No internal wiring simplifies assembly

• SPEEDCON® M12 connector technology allows for fast and efficient ½ turn I/O connector attachment

• Power connector allows output power to be removed while inputs and communication are left active

• IP65 protection

• Up to 1,200 Input/1,200 Output capability with one communication node!

• Up to 128 valve solenoids per manifold, up to 17 manifolds per communication node!

• One node supports 16 I/O modules – Analog I/O, Digital I/O

(NPN & PNP) and Specialty

• Integrated web server with EtherCAT® , EtherNet/IP™ , EtherNet/IP™ DLR, Ethernet POWERLINK®, Modbus® TCP/IP, and PROFINET™

• Innovative clip design allows easy module removal/ replacement without dismantling manifold

• Auto Recovery Module (ARM) protects configuration information during a critical failure. Allows configuration information to be saved and reloaded to replacement module automatically

Commissioning Capabilities

• Set network address (including

IP & Subnet mask for Ethernet)

• Set baud rate

• Set auto or manual I/O sizes

• Set fault/idle output states

• Set brightness

• Set factory defaults

• Visual diagnostics

• Shorted and open load detection

• Shorted sensor/cable detection

• Low & missing power detection

• Missing module detection

• Self-test activation

• Log of network errors

• Distribution errors

G3 Fieldbus - Electronics Made Easy!

Innovative Graphic Display is used for easy commissioning, visual status & diagnostics.

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

DIN Rail Mounting Option

Valve Manifold Assembly 501, 502, 503, 2002, 2005, 2012, 2035, ISO15407-2 &

ISO 5599/2 Series Valves

Communication Module (Node)

I/O Modules - Analog or Digital, NPN or PNP

Auto Recovery Module (ARM)

I/O Labels

Jumper Clips

Sub-bus Out or Terminator Module

Discrete I/O The G3 Series product line is a completely modular system. All of the G3 electronic modules plug together, via mechanical clips, allowing easy assembly and field changes. This makes the system highly distributable. Additional flexibility is incorporated because the same modules can be used in either centralized or distributed applications.

The G3 electronics interfaces with the highly modular Numatics 500 Series, Generation 2000 Series, ISO 5599/2 and ISO 15407-2 Series valve lines to further enhance the modularity and flexibility of the entire system. 500 Series valves allow up to 128 valve solenoids per manifold when properly configured. An external air pilot supply may be required with more than 32 valve solenoids on a manifold.

G3 Electronics Modularity

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

24 VDC

Power Supply

Sub-bus Manifold with I/O & Valves

Sub-bus

24 VDC

Power Supply

Sub-bus Out

Sub-bus Manifold with Valves

Optional 24 VDC AUX Power

Sub-bus Out Sub-bus In

I/O Only

Sub-bus

Main Fieldbus Manifold

• Unique distribution system allows system efficiency by allowing the same modules to be used in either centralized or distributed applications

• Distribution options include:

Inputs OR Outputs Inputs AND Outputs Valves with Inputs AND Outputs Valves with Inputs OR Outputs Valves Only

• Maximum Sub-bus length not to exceed 30 meters. Maximum Sub-bus cable current not to exceed 4 amps or excessive cable voltage drops per segment. Auxiliary power connections available for currents above 4 amps.

Consult factory for possible deviations.

G3 Platform Distribution Options Easy, Cost Effective Solutions for Digital I/O and Valve Automation using G3 Electronics.

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

16 Modules can be supported on this side of the comm. module

Comm. Module

I/O Side

Comm. Module

I/O Side Distribution

• A total of 16 modules can be integrated into the network and controlled by the main fieldbus communication module (node)

• Modules include analog and digital I/O modules providing addressing capacity for up to 1200 Inputs/1200 Outputs per node

• Unique distribution system allows system efficiency by allowing the same modules to be used in either centralized or distributed applications

• Distribution options include Inputs only, Outputs only, I/O only, valves with Inputs, valves with Outputs and valves with I/O

• Configuration can include up to 16 of the following modules:

– Digital I/O modules

– Sub-bus valve modules

– Analog I/O modules

Valve SideI/O Side

Comm. Module

Typical Main Fieldbus Manifold

Valve Side

• Up to a total of 128 valve solenoids can be driven in a manifold assembly integrated into the main fieldbus manifold. This can be any number of single or double solenoid valves with a total number of solenoids not to exceed 128

G3 Platform Distribution Options The G3 platform is flexible to the point that there are a virtually infinite number of I/O distribution options using the few basic G3 modules. The following basic rules should be followed in the configuration of your control architecture.

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.

G3 Electronics

Technical Data Electrical Data Voltage Current

Node Power at Max. Brightness Valves and Discrete I/O

24 VDC +/- 10%

24 VDC +/- 10%

8 Amps Maximum

Power Connector Single key 4 pin 7/8” MINI type (male) Communication Connector Two D-coded 4 pin M12 type (female) LEDs Module Status, Network Status and Activity / Link

Operating Data

Temperature Range -10˚ to 115˚ F (-23˚ to +50˚ C) Humidity 95% relative humidity, non-condensing Vibration / Shock IEC 60068-2-27, IEC 60068-2-6 Moisture IP65, IP67 (with appropriate assembly and termination)

Configuration Data

Graphic Display Display used for setting IP address, Subnet Mask, Fault / Idle Actions, and all other system settings.

ARM (Auto Recovery Module) Optional module that contains automatic recovery of system settings in the event of total or partial system failure.

Maximum Valve Solenoid Outputs 32

Maximum Sub-Bus I/O Points Various combinations of 1200 outputs and 1200 inputs

Network Data

Supported Baud Rates 10 Mbit / 100 Mbit

Bus Connector Two D-coded 4 pin M12 type (female)

Diagnostics Power, short, open load conditions and module health and configuration are monitored

Special Features Embedded two port switch, Device Level Ring (DLR) compatibility, Linear network topology, QuickConnect™ capability, fail-safe device settings, integrated web server, HTTP, TFTP, UNICAST

Weight

EtherCAT® communications module 227g / 8 oz.

EtherNet/IP™ DLR EtherNet/IP™ used throughout the world to network millions of PCs has now evolved into a viable industry network. EtherNet/IP™ is an open architecture high-level communication network that meets the demands of today’s industrial applications requiring high-speed (10/100 Mbit/s), high-throughput and flexibility. Additionally, EtherNet/IP™ technology can integrate an on-board web server, which can make the node readily accessible to any standard web browser for configuration, testing and even retrieval of technical documentation.

Numatics’ G3 EtherNet/IP™ DLR (Device Level Ring) node with integrated display has an embedded switch which allows the unit to be used in simplified networks with linear topology configurations (daisy chain). This technology alleviates the need for an external Ethernet switch device in a single subnet configuration. Additionally, the DLR compatibility allows the node to be used in a fault tolerant “ring” network, when using appropriate EtherNet/IP™ DLR scanners. DLR configuration allows communication recovery from a single point failure on the network ring (e.g. failed network connection or cable).

Numatics G3 EtherNet/IP™ nodes are capable of addressing combinations of up to 1200 Outputs and 1200 Inputs.

The G3 EtherNet/IP™ nodes have been tested and approved for conformance by the ODVA.

More information about EtherNet and the ODVA can be obtained from the following website:

Open Device Vendors Association (ODVA) www.odva.org

Description Replacement Part Number

EtherNet/IP™ DLR communications module (node)

240-325

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

Dust Cover - M12 Male 230-647

Figure B

Figure A

Weight I/O Module-Analog 244g/8.6 oz I/O Module-Digital 274g/9.7 oz I/O Module-Figure A 264g/9.3 oz I/O Module-Figure B 343g/12.1 oz

Operating Data Temperature Range (ambient) -23 °C to 46 °C (-10 °F to 115 °F) Humidity 95% relative humidity, non-condensing Vibration/Shock IEC 60068-2-27, IEC60068-2-6

Ingress Protection IP65 (with appropriate assembly and termination)

Connector-Analog & Digital M12 4 Pin Female, SPEEDCON®

(Compatible with 5 Pin) Connector-Figure A M12 4 Pin Male Connector-Figure B M23 19 Pin Female Resolution 16 bit

Technical Data

Description Signal Type Part Number Inputs

4 Analog Inputs 0 – 10 VDC 240-212

4 Analog Inputs 4 – 20 mA 240-214

Inputs and Outputs

2 Analog Inputs & 2 Analog Outputs 0 – 10 VDC 240-213

2 Analog Inputs & 2 Analog Outputs 4 – 20 mA 240-215

2 Analog Inputs & 2 Analog Outputs High Current (Figure A Only) 0 – 10 VDC 240-307

4 Analog Inputs & 4 Analog Outputs High Current (Figure A Only) 4 – 20 mA 240-363

Analog I/O with settable high and low alarms 5 Pin M12 Modules

Description Part Number Inputs

8 PNP Inputs 240-206

8 NPN Inputs 240-210

16 PNP Inputs 240-205

16 PNP Inputs 19 Pin M23 (Fig. B Only) 240-323

16 NPN Inputs 240-209

Outputs

8 PNP Outputs 240-208

8 PNP High Current Outputs (Fig. A Only) 240-300

16 PNP Outputs 240-207

Inputs and Outputs 8 PNP Inputs and 8 PNP Outputs 240-211

I/O Modules Digital I/O 5 Pin M12 Modules

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Line

HomR Line

HomR Line

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

Description Part Number Weight

Jumper Clip 240-179 45g/1.6 oz

Jumper Clip for Intrinsically Safe 240-317 65g/2.3 oz

Jumper Clip Provides electrical connections between modules.

Description Part Number Weight Terminator Module w/ DIN Rail Clips 240-245 102g/3.6 oz

Terminator Module 240-184 91g/3.2 oz

Terminator Module Provides termination for the Sub-bus. Must be installed after the last I/O module or after the communications module if there are no I/O modules installed.

Description Part Number Weight ARM Module 240-182 127g/4.5 oz

Auto Recovery Module (ARM) Protects configuration information during a critical failure.

Allows configuration information to be saved and reloaded to replacement module automatically.

Miscellaneous Modules

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

{Technical Data

Material Polycarbonate (PC)

Color White

Temperature Range -40 ºC to 140 ºC (-40 ºF to 284 ºF)

Label Dimensions 0.19" x 0.39"

Label - Printable Area 0.19" x 0.39"

Labels - 122-1251

Accessories For use with Murrplastik© Type 20 Software.

Description Part Number Weight Right Hand Mounting Cover w/ DIN Rail Clips* 240-289 82g/2.9 oz

Right Hand Mounting Cover* 240-255 71g/2.5 oz

Right Hand Mounting Cover Assembly Kit for ARM 245-189 371g/13.1 oz

* Not for use in combination with ARM Module

Right Hand Mounting Cover Used when a communications module is used without local valves installed.

Description Part Number Weight

Valve Driver Module P599AE508827001 234g/8.3 oz

Valve Driver Module w/ DIN Rail Clips P599AE508827002 246g/8.7 oz

501, 502 and 503 Series Valves

Description Part Number Weight Valve Driver Module w/ DIN Rail Clips 219-858 147g/5.2 oz

Valve Driver Module 219-828 136g/4.8 oz

Generation 2000, ISO 5599/2 and ISO 15407-2 Series

Valve Driver Module Provides connections between the communication module or Sub-bus valve module and the valve manifold.

Miscellaneous Modules

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

1 Port Type 8 & G only available in Port Size 3/8 for 502 & 503 and 1/8 for 501 2 501 not available with 2 stations, 502 and 503 only available with an even number of stations and with up to 80 valve solenoids 3 With 502 11mm (501) valve available, with 503 18mm (502) valve available 4 501 Port Sizes 1/8, 1/4, 5/16, 8mm, 502 and 530 Port Sizes 3/8, 1/2, 10 and 12mm

Port Size 1 = 1/8 2 = 1/4 G = 5/16 3 = 3/8 4 = 1/2 H = 8mm K = 10mm M = 12mm

Valve Station Adder 0 = No Adder 1 = 32+ 2 = 64+ 3 = 96+

Second Valve Series 0 = No Second Valve Series 1 = 501 2 = 502

End Plate Style V = Vertical

Options A00 = Standard (No Options) MUF = Muffler in End Plates DRM = DIN Rail Mount DWM = DIN Rail with MUF 14X = External Pilot Supply from Port # 14 D12 = (14X) External Pilot Supply from Port #14 and (MUF) Muffler in End Plates D14 = (14X) External Pilot Supply from Port #14 and (DRM) DIN Rail Mount F06 = (14X) External Pilot Supply from Port

#14, (MUF) Muffler in End Plates, and (DRM) DIN Rail Mount

Number of Valve Stations

A = NA/33/65/97

B = 2/34/66/98 C = 3/35/67/99 D = 4/36/68/100

E = NA/37/69/101

F = 6/38/70/102 G = 7/39/71/103 H = 8/40/72/104 I = 9/41/73/105 J = 10/42/74/106 K = 11/43/75/107 L = 12/44/76/108 M = 13/45/77/109 N = 14/46/78/110 O = 15/47/79/111 P = 16/48/80/112

Q = 17/49/81/113 R = 18/50/82/114 S = 19/51/83/115 T = 20/52/84/116 U = 21/53/85/117 V = 22/54/86/118 W = 23/55/87/119 X = 24/56/88/120 Y = 25/57/89/121 Z = 26/58/90/122 2 = 27/59/91/123 3 = 28/60/92/124 4 = 29/61/93/125 5 = 30/62/94/126 6 = 31/63/95/127 7 = 32/64/96/128

Electronics 3 = G3 Fieldbus Electronics 8 = Sub-bus Valve Manifold w/o I/O

Product Type V = Valve Manifold Assembly

Revision A = Initial Release

Product Series 501 = 11mm Valve 502 = 18mm Valve 503 = 26mm Valve

Port Type

8 = NPTF

G = ISO228/1-G

K = Push-in Fittings

K 501 A V 3 D 2 0 0 V A00

How To Order: 500 Series Manifold Assembly

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

Shaded components are described by the manifold assembly number. The communications module is described by the electronic interface model number designation.

Each valve station is listed in sequential order from left to right when facing the port side of the manifold as shown.

NOTE:

Up to 128 solenoid outputs are available. Either 128 single solenoid valves or 64 double solenoid valves or any combination of singles and doubles not to exceed 128 outputs can be specified.

How to Order: Sub-bus Valve Manifold without I/O or Additional Distribution

Example Order - 503 Shown Assembly Kit 8503AV8H300VMUF Valve Station #1 R503A2B40MA00F1 Valve Station #2 R503A2B40MA00F1 Mounting #1 8503AMM22MA0010 Valve Station #3 R503A2B40MA00F1 Valve Station #4 R503A2B40MA00F1 Mounting #2 8503AMM22MA0010 Valve Station #5 R503A2B40MA00F1 Valve Station #6 R503A2B40MA00F1 Mounting #3 8503AMM22MA0010 Valve Station #7 R503A2B40MA00F1 Valve Station #8 R503A2B40MA00F1 Mounting #4 8503AMM22MA0010 Electronics P580AEDS4010A00 Assembled

Visit our website at ASCO.com or contact us at (800) 972-2726

G3

ELECTRONICS

16 1 1 152 3 16

Example Order - I/O Assembly w/ Sub-bus In and Sub-bus Out Modules Shown Electronics G3DS316D0STD Station 1 240-205 Station 2 240-205

Station 15 240-205 Station 16 240-205

1. Refer to the selection table on the previous page to specify the control electronics and I/O configuration.

2. Each discrete I/O module is listed in sequential order from RIGHT to LEFT as shown.

3. A maximum of 16 I/O modules are supported by a single communication node. Analog I/O & digital I/O (NPN & PNP)

How To Order G3 Electronics

Example Order - 2005 Shown Assembly Kit AK3EP00003LMUF Station 1 052BB4Z2ML00061 Station 2 052BB4Z2ML00061 Station 3 052BB4Z2ML00061 Station 4 052BB4Z2ML00061 Station 5 052BB4Z2ML00061 Station 6 052BB4Z2ML00061 Station 7 052BB4Z2ML00061 Station 8 052BB4Z2ML00061 Station 9 052BB4R2ML00061 Station 10 052BB4Z2ML00061 Station 11 052BB4Z2ML00061 Station 12 052BB4Z2ML00061 Station 13 052BB4Z2ML00061 Station 14 052BB4Z2ML00061 Station 15 052BB4Z2ML00061 Station 16 052BB4Z2ML00061 Electronics G3DN116R0E40 Station 1 240-205 Station 2 240-205

Station 15 240-205 Station 16 240-205

Shaded components are described by the assembly kit (AK) model number (see previous page). The communications module and number of I/O modules are described by the electronic interface (G3) model number designation (see previous page).

Each valve station is listed in sequential order from left to right when facing the port side of the manifold as shown.

Each discrete I/O module is listed in sequential order from RIGHT to LEFT starting from the communication module as shown.

NOTE:

1. A total of 32 solenoid outputs are available. Either 32 single solenoid valves or 16 double solenoid valves or any combination of singles and doubles not to exceed 32 outputs can be specified.

2. For manifold assemblies that exceed 16 solenoids, the assembly MUST be configured so that an even number of solenoids are utilized prior to the station using the ribbon cable feature. The 16th and the 17th solenoids cannot be on the same valve.

How to Order: Valve Manifold Assemblies w/ G3 Electronics & Discrete I/O For valve series 2002, 2005, 2012, 2035, ISO 15407-2 & ISO 5599/2 (2005 shown)

Visit our website at ASCO.com or contact us at (800) 972-2726

SERIES

501 PERFORM

AN

CE

HOW

TO ORD

ER

Fieldbus Electronics Compatible

• G3 Fieldbus Electronics

– Graphic Display for easy commissioning, visual status & diagnostics

– 128 valve solenoids per manifold

– Easy distribution of additional manifolds through Sub-bus communication

– One Node supports up to 16 I/O modules

– Available with Auto Recovery Module (ARM) which allows configuration information to be saved and reloaded to replacement module automatically

• 580 Fieldbus Electronics

– Graphic Display for easy commissioning, visual status & diagnostics

– 128 valve solenoids per manifold

Sandwich and Manifold Accessories

• Pressure Regulators for supply pressure control at individual valve

• Speed control to control exhaust flow allows for control of actuator extend or retract speed

• Shut off block for individual valve to be isolated from pressure supply during operation and repair

• Mid Station Supply Manifold block allows for multiple pressure zones

(with blocking discs) or additional air supply to a manifold

Features

• Solenoid air pilot actuated

• Low wattage 0.8 Watt for DC application

• DC solenoids Polarity insensitive with surge suppression

• Plug together circuit boards eliminate internal wiring

• Integral recessed gaskets

• IN Fittings to accommodate various tube sizes

• Simple conversion from internal to external pilot

• IP65 Certified

501 Series – Directional Control Valve Platform Featuring Higher Flow in a Compact Valve Package

Visit our website at ASCO.com or contact us at (800) 972-2726

SERIES

All Solenoids Are Continuous Duty Rated 24 VDC Power (Watts) 0.8

Holding Current (Amps) 0.025

Ambient Temperature Range Min/Max °F (°C) -14° F (-10° C)/122° F (50° C)

Operating Data Materials in Contact w/Fluid

Body Aluminum, E-Coating treatment

Spool Aluminum or Stainless Steel

Piston POM

Spring Steel

Spool Seals NBR + PUR

Other Seals NBR + FKM

Other materials PAM (Polyarylamide) 50% Glass Fiber Reinforced

Valve to Subbase Gasket NBR

Subbases Aluminum, E-Coating treatment

Construction

Function Type

Function Code

ISO Symbol

Pilot (14) Return (12)

Interface

Rated Flow Response Time (ms)

Pilot Pressure at 73°F/23°C

PSI (bar)

Operating Pressure

Port 1 PSI (bar)/inHg (-bar) at 90 PSI Cv

(l/min (ANR)) 1 2 1 4

2 3 4 5

Energize/ De-Energize min. max min. max Part Number

Rubber Packed Technology, with Manual Override

5/2

B1

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2

5/2 PNEUMATIC SYMBOLS

(12)

004A1

004A3

004A5

004A6

004A8

004A10

004F1

004F3

004F5

004F6

004F8

004F10

14 1

4 2

4 2

35 83 (12)

14 12

14 1

4 2

4 2

004A14 004F14

004A15 004F15

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2 - VERSION METAL METAL

5/2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

005A1 005F1

005A2 005F2

005A3 005F3

005A4 005F4

005A5 005F5

005A6 005F6

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

006A9 006F9

006A10 006F10

006A11 006F11

006A12 006F12

006A13 006F13

006A14 006F14

006A15 006F15

006A16 006F16

(12)

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3

5/3 PNEUMATIC SYMBOLS

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 2X 3/2

2X 3/2 PNEUMATIC SYMBOLS

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

005A7 005F7

005A8 005F8

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3 W2 - VERSION METAL METAL

5/3 W2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

NOTA / NOTE:

SYMBOLES SELON LES NORMES ISO NF ISO 1219-1 Janvier 2007 SYMBOLS AS PER ISO NF ISO 1219-1 January 2007

(A)

(12)

4 2

(12)

4 2

(12)

4 2

(12)

4 2

Spring Return

Proprietary

0.460 (460)

0.465

(465) 14/29 29

(2) (8)

(-0.95)

(8) R501A2B10MA00F1

BN 1

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2

5/2 PNEUMATIC SYMBOLS

(12)

004A1

004A3

004A5

004A6

004A8

004A10

004F1

004F3

004F5

004F6

004F8

004F10

14 1

4 2

4 2

35 83 (12)

14 12

14 1

4 2

4 2

004A14 004F14

004A15 004F15

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2 - VERSION METAL METAL

5/2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

005A1 005F1

005A2 005F2

005A3 005F3

005A4 005F4

005A5 005F5

005A6 005F6

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

006A9 006F9

006A10 006F10

006A11 006F11

006A12 006F12

006A13 006F13

006A14 006F14

006A15 006F15

006A16 006F16

(12)

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3

5/3 PNEUMATIC SYMBOLS

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 2X 3/2

2X 3/2 PNEUMATIC SYMBOLS

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

005A7 005F7

005A8 005F8

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3 W2 - VERSION METAL METAL

5/3 W2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

NOTA / NOTE:

SYMBOLES SELON LES NORMES ISO NF ISO 1219-1 Janvier 2007 SYMBOLS AS PER ISO NF ISO 1219-1 January 2007

(A)

(12)

4 2

(12)

4 2

(12)

4 2

(12)

4 2

Differential Air Return

0.460 (460)

0.465

(465) 25/21 29

(2) (8)

(-0.95)

(8) R501A2BN0MA00F1

B4

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2

5/2 PNEUMATIC SYMBOLS

(12)

004A1

004A3

004A5

004A6

004A8

004A10

004F1

004F3

004F5

004F6

004F8

004F10

14 1

4 2

4 2

35 83 (12)

14 12

14 1

4 2

4 2

004A14 004F14

004A15 004F15

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2 - VERSION METAL METAL

5/2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

005A1 005F1

005A2 005F2

005A3 005F3

005A4 005F4

005A5 005F5

005A6 005F6

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

006A9 006F9

006A10 006F10

006A11 006F11

006A12 006F12

006A13 006F13

006A14 006F14

006A15 006F15

006A16 006F16

(12)

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3

5/3 PNEUMATIC SYMBOLS

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 2X 3/2

2X 3/2 PNEUMATIC SYMBOLS

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

005A7 005F7

005A8 005F8

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3 W2 - VERSION METAL METAL

5/3 W2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

NOTA / NOTE:

SYMBOLES SELON LES NORMES ISO NF ISO 1219-1 Janvier 2007 SYMBOLS AS PER ISO NF ISO 1219-1 January 2007

(A)

(12)

4 2

(12)

4 2

(12)

4 2

(12)

4 2

Solenoid Air Return

0.460 (460)

0.465

(465) 11/11 29

(2) (8)

(-0.95)

(8) R501A2B40MA00F1

5/3

B5

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2

5/2 PNEUMATIC SYMBOLS

(12)

004A1

004A3

004A5

004A6

004A8

004A10

004F1

004F3

004F5

004F6

004F8

004F10

14 1

4 2

4 2

35 83 (12)

14 12

14 1

4 2

4 2

004A14 004F14

004A15 004F15

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2 - VERSION METAL METAL

5/2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1

4 2

005A1 005F1

005A2 005F2

005A3 005F3

005A4 005F4

005A5 005F5

005A6 005F6

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

14 12

14 10

10 10

10 12

14 12

14 10

10 10

10 12

10 10 10 10

10 12 10 12

14 12 14 12

14 10 14 10

006A9 006F9

006A10 006F10

006A11 006F11

006A12 006F12

006A13 006F13

006A14 006F14

006A15 006F15

006A16 006F16

(12)

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3

5/3 PNEUMATIC SYMBOLS

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 2X 3/2

2X 3/2 PNEUMATIC SYMBOLS

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

(12)

005A7 005F7

005A8 005F8

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/3 W2 - VERSION METAL METAL

5/3 W2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

NOTA / NOTE:

SYMBOLES SELON LES NORMES ISO NF ISO 1219-1 Janvier 2007 SYMBOLS AS PER ISO NF ISO 1219-1 January 2007

(A)

(12)

4 2

(12)

4 2

(12)

4 2

(12)

4 2

Center Open to Exhaust

0.420 (420)

0.470

(470) 27/12 29

(2) (8)

(-0.95)

(8) R501A2B50MA00F1

B61

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

4 2

35 1

4 2

14 1

4 2

4 2

14 1

4 2

4 2

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2

5/2 PNEUMATIC SYMBOLS

(12)

004A1

004A3

004A5

004A6

004A8

004A10

004F1

004F3

004F5

004F6

004F8

004F10

14 1

4 2

4 2

35 83 (12)

14 12

14 1

4 2

4 2

004A14 004F14

004A15 004F15

SYMBOLES PNEUMATIQUES DISTRIBUTEUR 5/2 - VERSION METAL METAL

5/2 PNEUMATIC SYMBOLS - SPOOL AND SLEEVE VERSION

4 2

3514 1

4 2

4 2

3514 1

4 2

4 2

3514 1