Addendum 003 - Equipment - Calibration Columns R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015185 Rev: 00

Description of Item: Calibration Columns

Specification Section: 43 21 00

Deviations: See document NYCS000015386

INDEX:

Page 1: Cover Page Information

Page 2: Revision History and Approvals

Page 3: Tab 1 - NYCS000015406,CSS,Calibration Columns

Pages 4-5: Tab 2 - NYCS000015426,Calibration Column,Griffco,10L,SOC,WH172341

Pages 6-7: Tab 3 - NYCS000015427,Calibration Column,Griffco,20L,SOC,WH172342

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015406R00 Doc Title: NYCS000015406,CSS,Calibration Columns.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015185, Calibration Columns,01.287:

L‐897,Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 43 21 00, Pumping Equipment Basic Requirements.

Any exceptions and clarifications to the specification section above can be found in submittal NYCS000015386, Es and Cs, Section 43 21 00.

Pall has not taken any exception or clarifications relevant to the calibration columns proposed.

Griffco Valve Inc.

188 Creekside Dr Amherst, NY 14228 USA Phone: +1 716 835-0891 Fax: +1 716 835-0893 sales@griffcovalve.com www.griffcovalve.com

PVC CALIBRATION COLUMNS

Griffco calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump.

Robust construction of clear PVC with an easy to read graduation in mL and gph. Available in three models:

EZ-Clean, Vented, and Open Top; and in 15 sizes: 100 mL through 40,000 mL as detailed here.

Features:

High Reliability / Low Cost

High Contrast Graduation Markings

Clear Easy-View Tube

Robust Schedule 40 Pipe Construction

Direct GPH Readout

Sealed Top with Overflow Connection

Optional EZ-Clean Model

Optional Open Top with Dust Cap

Operation:

Griffco calibration cylinders are installed in the suction line to the chemical metering pump. Two isolating valves, (not supplied) must be installed in the suction line as per the drawing below. The top of the cylinder should be vented back to the storage tank or to drain.

Fill the cylinder to the top mark then close the valve from the chemical tank. Switch on the chemical feed pump and draw down the chemical in the cylinder for 30 seconds. Switch the pump off. The reading on the right side of the cylinder is a direct readout of USgph.

Alternatively, observe the volume withdrawn on the mL scale. To convert to LPH or GPH use this formula:

LPH = 3.6 x [mL] ÷ Time (sec)

GPH = 0.951 x [mL] ÷ Time (sec)

Note: Max. cylinder pressure is 15 psi.

ISO 9001:2008 Certified CALL 1 - 800 - GRIFFCO Bulletin # CAL7003-2016-01 4 mailto:sales@griffcovalve.com http://www.griffcovalve.com/ LarkinD Text Box

NYCS000015246R00

LarkinD

WH172341: Part #: CC10000SS, 10000ml, sealed, 2" socket ends

Description of models:

Sealed:

Top is glued to cylinder and contains a vent or overflow connection. (FNPT).

Used in applications where there is a positive suction head and a permanent installation is desired.

Loose Cap: (Avail. up to 20,000 mL) Top is loose and does not have a connection in the top. Dust cover only.

Used in applications where there is no positive suction head and the cylinder must be filled from the top.

EZ-Clean: (Avail. 100 – 7000 mL only) Top is sealed with an O-ring and has a vent connection, but removable for easy cleaning. Used in applications where frequent cleaning is required such as polymer, alum, ferric chloride or chlorine.

Codes for Ordering PVC Calibration Columns:

CC □□□□ □ □ □

1 2 3 4

1 = Size 2 = Top End Cap Style 3 = Connections 4 = Oring Material (Top Cap Only) (Union & EZ end cap orings)

0100 – 100 mL S – Sealed Blank – Threaded Blank – FKM (Viton®)

0200 – 200 mL L – Loose (up to 20000mL) S – Socket E - EPDM

0300 – 300 mL EZ – EZ Clean (up to 7000mL) F – Flanged

0500 – 500 mL U – Union

1000 – 1000 mL Available O-ring Options:

2000 – 2000 mL PTFE Encapsulated

3000 – 3000 mL or FFKM are available

4000 – 4000 mL upon request

5000 – 5000 mL

7000 – 7000 mL

10000 – 10000 mL

15000 – 15000 mL

20000 – 20000 mL 30000 – 30000 mL

40000 – 40000 mL

Website: www.griffcovalve.com email: sales@griffcovalve.com

Capacity

(mL) ◊

Max Flow ▲

(USgph) (lph) Scale

(mL)

Scale ▲

(gph) A

(in)

B

(in)

C

(in)

100 3.17 12 1 .1 11 1.5 1/2

200 6.34 24 1 .1 19 1.5 1/2

300 9.51 36 5 .2 13 2.2 1/2

500 15.85 60 5 .2 13 2.5 3/4

1,000 31.70 120 5 .2 22 2.5 3/4

2,000 63.40 240 10 1 20 3.7 1

3,000 95.10 360 10 1 17 4.9 1 1/2

4,000 126.8 480 10 1 37 3.7 1

5,000 158.5 600 10 1 28 4.9 1 1/2

7,000 221.9 840 10 1 38 4.9 1 1/2

10,000 317.0 1200 100 5 25 6.95 2

15,000 475.5 1800 100 5 36 6.95 2

20,000 634.0 2400 100 5 47 6.95 2

30,000 952.0 3600 200 10 65* 9.5* 4

40,000 1,268.0 4800 200 10 77.5* 9.5* 4

▲ Max Flow and gph scale are based on 30 second drawdown * Reference only

◊ For 60 sec draw down, double capacity in mL or flow size

Clear PVC Cylinder

Top End Cap

Bottom End Cap

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight

LarkinD Line

LarkinD Line

LarkinD Text Box Part #: CC10000SS

LarkinD Highlight

Griffco Valve Inc.

188 Creekside Dr Amherst, NY 14228 USA Phone: +1 716 835-0891 Fax: +1 716 835-0893 sales@griffcovalve.com www.griffcovalve.com

PVC CALIBRATION COLUMNS

Griffco calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump.

Robust construction of clear PVC with an easy to read graduation in mL and gph. Available in three models:

EZ-Clean, Vented, and Open Top; and in 15 sizes: 100 mL through 40,000 mL as detailed here.

Features:

High Reliability / Low Cost

High Contrast Graduation Markings

Clear Easy-View Tube

Robust Schedule 40 Pipe Construction

Direct GPH Readout

Sealed Top with Overflow Connection

Optional EZ-Clean Model

Optional Open Top with Dust Cap

Operation:

Griffco calibration cylinders are installed in the suction line to the chemical metering pump. Two isolating valves, (not supplied) must be installed in the suction line as per the drawing below. The top of the cylinder should be vented back to the storage tank or to drain.

Fill the cylinder to the top mark then close the valve from the chemical tank. Switch on the chemical feed pump and draw down the chemical in the cylinder for 30 seconds. Switch the pump off. The reading on the right side of the cylinder is a direct readout of USgph.

Alternatively, observe the volume withdrawn on the mL scale. To convert to LPH or GPH use this formula:

LPH = 3.6 x [mL] ÷ Time (sec)

GPH = 0.951 x [mL] ÷ Time (sec)

Note: Max. cylinder pressure is 15 psi.

ISO 9001:2008 Certified CALL 1 - 800 - GRIFFCO Bulletin # CAL7003-2016-01 6 mailto:sales@griffcovalve.com http://www.griffcovalve.com/ LarkinD Text Box

NYCS000015427R00

LarkinD

WH172342: Part #: CC20000SS, 20000ml, sealed, 2" socket ends

Description of models:

Sealed:

Top is glued to cylinder and contains a vent or overflow connection. (FNPT).

Used in applications where there is a positive suction head and a permanent installation is desired.

Loose Cap: (Avail. up to 20,000 mL) Top is loose and does not have a connection in the top. Dust cover only.

Used in applications where there is no positive suction head and the cylinder must be filled from the top.

EZ-Clean: (Avail. 100 – 7000 mL only) Top is sealed with an O-ring and has a vent connection, but removable for easy cleaning. Used in applications where frequent cleaning is required such as polymer, alum, ferric chloride or chlorine.

Codes for Ordering PVC Calibration Columns:

CC □□□□ □ □ □

1 2 3 4

1 = Size 2 = Top End Cap Style 3 = Connections 4 = Oring Material (Top Cap Only) (Union & EZ end cap orings)

0100 – 100 mL S – Sealed Blank – Threaded Blank – FKM (Viton®)

0200 – 200 mL L – Loose (up to 20000mL) S – Socket E - EPDM

0300 – 300 mL EZ – EZ Clean (up to 7000mL) F – Flanged

0500 – 500 mL U – Union

1000 – 1000 mL Available O-ring Options:

2000 – 2000 mL PTFE Encapsulated

3000 – 3000 mL or FFKM are available

4000 – 4000 mL upon request

5000 – 5000 mL

7000 – 7000 mL

10000 – 10000 mL

15000 – 15000 mL

20000 – 20000 mL 30000 – 30000 mL

40000 – 40000 mL

Website: www.griffcovalve.com email: sales@griffcovalve.com

Capacity

(mL) ◊

Max Flow ▲

(USgph) (lph) Scale

(mL)

Scale ▲

(gph) A

(in)

B

(in)

C

(in)

100 3.17 12 1 .1 11 1.5 1/2

200 6.34 24 1 .1 19 1.5 1/2

300 9.51 36 5 .2 13 2.2 1/2

500 15.85 60 5 .2 13 2.5 3/4

1,000 31.70 120 5 .2 22 2.5 3/4

2,000 63.40 240 10 1 20 3.7 1

3,000 95.10 360 10 1 17 4.9 1 1/2

4,000 126.8 480 10 1 37 3.7 1

5,000 158.5 600 10 1 28 4.9 1 1/2

7,000 221.9 840 10 1 38 4.9 1 1/2

10,000 317.0 1200 100 5 25 6.95 2

15,000 475.5 1800 100 5 36 6.95 2

20,000 634.0 2400 100 5 47 6.95 2

30,000 952.0 3600 200 10 65* 9.5* 4

40,000 1,268.0 4800 200 10 77.5* 9.5* 4

▲ Max Flow and gph scale are based on 30 second drawdown * Reference only

◊ For 60 sec draw down, double capacity in mL or flow size

Clear PVC Cylinder

Top End Cap

Bottom End Cap

LarkinD Highlight

LarkinD Line

LarkinD Line

LarkinD Text Box Part #: CC20000SS

LarkinD Highlight

LarkinD Highlight

LarkinD Highlight