Addendum 003 - Valves - Butterfly Valves R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015134 Rev: 00

Description of Item: Butterfly Valves

Specification Section: 40 05 51 and 40 05 64

Deviations: See document NYCS000015372 and NYCS000015375

INDEX:

Page 1: Cover Page Information

Page 2: Revision History and Approvals

Page 3: Tab 01 - NYCS000015395,CSS,Butterfly Valves,01.287

Page 4: Tab 02 - NYCS000015297,Bray Series 41 Butterfly Valve Part Numbering

Page 5: Tab 03 - NYCS000015296,Bray Series 40,41,Dimensions

Pages 6-33: Tab 04 - NYCS000015294,Bray Series 40,41,Technical Manual

Pages 34-43: Tab 05 - NYCS000011391,Bray Series 31 Butterfly Valves with Part Numbering

Pages 44-45: Tab 06 - NYCS000015292,Limit Switch,Kinetrol,07-15,WH172343

Pages 46-66: Tab 07 - NYCS000015455,Actuators,Kinetol,01.287

Pages 67-72: Tab 08 - NYCS000011367,Positioner,Bray

Page 73: Tab 09 - NYCS000015460,Bray 6A Positioner,SR,WH172350

Page 74: Tab 10 - NYCS000015461,Bray 6A Positioner,DA,WH172351

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Bray Series 41 Lugged Valve Part Numbering Codes

Valve part number format: XX‐XXXX‐XXXXX‐XXX/SSSS

Example Part#: 41‐0600‐11001‐066/A052

Series, 41, lugged butterfly valve

Size, 0600, 6 inch

Base, 11001, indicates anything special about the valve. Internal to Bray.

Trim Code, 066, indicates cast 316L stainless steel body, 316L stainless steel disc, 17‐4 stainless steel stem, PTFE packing and RPTFE seat.

Optional Suffix, A052, indicates NSF‐61

XX XXXX XXXXX XXX /SSSS

Series Size Base Trim Code Optional Suffix

LarkinD

NYCS000015297R00

Pg. 2

Drawings are for reference only. Please refer to Bray ES drawings on the Bray website, www.bray.com. Bray reserves the right to change product dimensions without notice.

Inquire/P.O. No.:_____________________________________

Bray Order No.: ____________________________________

Standard Series 40/41 Bray McCannalok Sizes 21⁄2” - 60” • ASME 150 • Dimensions

SR Drawing #40/41-2.5/60-in. August 2012- Rev. 0

Customer/Project: ____________________________________

IMPERIAL DIMENSIONS: Inches

Valve Size A B C ‡ D E F

Mounting Data G H** J K L Weight

(lbs)

Lug Bolting Data Weight

(lbs)BCD No.

Holes

Hole Dia. BCD No.

Holes Threads

UN-2B

2½ 4.75 1.88 2.28 3.81 6.38 4.36 2.76 4 0.38 0.63 0.43 1.25 2.50 0.77 13 5.50 4 5⁄8 - 11 14 3 5.25 1.88 2.86 4.09 6.63 4.36 2.76 4 0.38 0.63 0.43 1.25 2.50 0.77 16 6.00 4 5⁄8 - 11 15 4 6.75 2.03 3.72 4.71 7.50 4.36 2.76 4 0.38 0.63 0.43 1.25 2.50 0.75 20 7.50 8 5⁄8 - 11 23 5 7.50 2.23 4.80 5.07 7.50 5.12 2.76 4 0.38 0.75 0.51 1.25 4.50 0.94 26 8.50 8 3⁄4 - 10 34 6 8.62 2.23 5.88 5.57 8.00 5.12 2.76 4 0.38 0.75 0.51 1.25 4.50 0.94 33 9.50 8 3⁄4 - 10 47 8 10.75 2.40 7.80 6.94 9.50 5.12 4.92 4 0.53 0.87 0.63 1.25 4.50 0.94 46 11.75 8 3⁄4 - 10 54 10 13.06 2.75 9.78 8.56 10.75 6.12 4.92 4 0.53 1.18 0.87 2.00 4.50 1.07 79 14.25 12 7⁄8 - 9 94 12 15.50 3.08 11.74 10.18 12.25 6.12 4.92 4 0.53 1.18 0.87 2.00 4.50 1.13 123 17.00 12 7⁄8 - 9 136 14 17.50 3.73 12.90 11.95 14.50 7.75 4.92 4 0.53 1.38 .39 x .39 2.00 6.50 1.42 208 18.75 12 1 - 8 227 16 19.81 4.11 14.68 12.94 17.75 10.38 6.50 4 0.81 1.97 .47 x .39 2.50 6.50 1.66 313 21.25 16 1 - 8 345 18 21.41 4.61 16.60 14.15 20.00 10.38 6.50 4 0.81 1.97 .47 x .39 2.50 6.50 1.86 402 22.75 16 11⁄8 - 8 442 20 23.68 5.03 18.50 15.26 22.75 10.38 6.50 4 0.81 2.50 .62 x .62 4.00 6.50 2.06 527 25.00 20 11⁄8 - 8 604 24 28.00 6.00 22.50 18.21 25.00 15.38 10.00 8 0.67 3.00 .75 x .75 4.00 11.75 2.44 813 29.50 20 11⁄4 - 8 930 26 29.50 6.50 22.36 19.23 25.00 15.38 10.00 8 0.67 3.00 .75 x .75 4.00 11.75 2.81 970* 31.75 24 11⁄4 - 8 1280* 28 32.41 6.50 26.47 20.54 26.75 15.38 10.00 8 0.67 3.00 .75 x .75 4.00 11.75 2.81 1115 34.00 28 11⁄4 - 8 1300 30 34.50 7.50 28.31 21.36 28.75 19.50 11.73 8 0.81 3.50 .88 x .62 5.25 13.50 3.10 1475 36.00 28 11⁄4 - 8 1740 32 37.62 7.50 30.19 22.36 30.00 19.50 11.73 8 0.81 3.50 .88 x .62 5.25 13.50 3.22 1650* 38.50 28 11⁄2 - 8 2060* 34 39.62 7.75 30.13 23.86 30.00 19.50 11.73 8 0.81 3.50 .88 x .62 5.25 13.50 3.35 1890* 40.50 32 11⁄2 - 8 2340* 36 40.68 8.26 34.00 25.27 33.00 19.50 11.73 8 0.81 3.50 .88 x .62 5.25 13.50 3.63 1960 42.75 32 11⁄2 - 8 2600 40 51.00 9.50 36.99 27.25 37.00 19.50 11.73 8 0.81 4.50 1.0 x .75 5.25 13.50 4.38 3850* 47.25 36 11⁄2 - 8 3950* 42 53.31 9.50 39.05 29.37 38.00 19.50 11.73 8 0.81 4.50 1.0 x .75 5.25 13.50 4.38 4250* 49.50 36 11⁄2 - 8 4300 48 54.00 10.00 46.09 33.12 42.13 24.00 14.02 8 1.25 5.00 1.25 x .88 6.00 16.00 4.50 4610* 56.00 44 11⁄2 - 8 5680* 54 66.38 10.75 52.45 35.65 45.50 24.00 14.02 8 1.25 6.00 1.5 x 1.0 6.50 16.00 4.75 7100* 62.75 44 1 3/4 -8 7210* 60 73.00 12.50 57.07 39.44 50.75 26.00 15.98 8 1.50 7.00 1.75 x 1.5 7.50 18.70 4.75 ----* 69.25 52 1 3/4-8 9360

J

E

D

Lug Bolting

F

ØG

C

B

H K

L

A

K

Mounting

HH

G

H

**(H=Flats)

**(H=Keyway)

Dimensions are in inches and weights in lbs.

Weights are for Cast Steel bodies, except when noted by *.

* - Flame cut body weights. Flame Cut Steel and SS bodies vary. Please consult factory.

‡ - C dimension is absolute minimum pipe ID at valve face (without gasket).

** Keyway is applicable on valve sizes 14"-54" Class 150 10"-48" Class 300, and 8"-30" Class 600

S40 - Wafer / S41 - Lug

LarkinD

NYCS000015296R00

SERIES 4X HIGH PERFORMANCE

BRAY/McCANNALOK VALVES

Technical Manual

THE HIGH PERFORMANCE COMPANYBRAY.COM

http://www.bray.com LarkinD

NYCS000015294R00

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

For information on this product and other Bray products please visit us at our web page - www.bray.com

TABLE OF CONTENTS

Seating & Unseating Torques 1

ASME 150 - Torques (Lb-in) 2

ASME 150 - Torques (Lb-in) 3

ASME 300 - Torques (Lb-in) 4

ASME 600 - Torques (Lb-in) 5

ASME 150 - Torques (N-m) 6

ASME 150 - Torques (N-m) 7

ASME 300 - Torques (N-m) 8

ASME 600 - Torques (N-m) 9

Dynamic Torques 10

Dynamic Torque Coefficient 11

Subchoked and Choked Flow 12

Subchoked Liquid Flow, Line-size Valve 13

Choked Gas Flow, Reduced-size Valve 13

Maximum Allowable Stem Torques (Lb-in)* 14

Maximum Allowable Stem Torques (N-m)* 15

Valve Sizing Coefficients (Cv) 16

ASME 150 Series 40/41/4A - Valve Sizing Coefficient (Cv) 16

ASME 300 Series 42/43/4B - Valve Sizing Coefficient (Cv) 17

ASME 600 Series 44/45 - Valve Sizing Coefficient (Cv) 17

Valve Sizing Coefficients (Kv) 18

ASME 150 Series 40/41/4A - Valve Sizing Coefficient (Kv) 18

ASME 300 Series 42/43/4B - Valve Sizing Coefficient (Kv) 19

ASME 600 Series 44/45 - Valve Sizing Coefficient (Kv) 19

Pressure-Temperature Charts - Standard McCannalok And Firesafe Valves 20

Pressure-Temperature Charts - Metal Seated McCannalok Valves 22

Pressure Temperature Charts - Cryogenic McCannalok Valves 23

Examples of Typical Flange to Valve Bolting 24 http://www.bray.com

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

FLOWFLOW

Seat Retainer Seat Retainer

UPSTREAM DOWNSTREAM

FLOWFLOW

Seat Retainer Seat Retainer

UPSTREAM DOWNSTREAM

SEATING & UNSEATING TORQUES

Valve orientation to the flow of media affects the torque

Torque values are presented in two categories:

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 150 - Torques (Lb-in) Series 40/41/4A Standard - Valve Differential Pressure (psig)

Valve Size

Inches

Less than 150 psig >150-200 psig >200-250 psig >250-285 psig

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

2 Please Consult Factory 206 257

2.5 170 200 190 240 210 280 215 300

3 185 220 210 260 225 300 230 320 4 275 320 300 370 315 420 320 460 5 550 650 640 800 705 940 730 1,040 6 690 810 770 960 825 1,100 840 1,200 8 1,280 1,500 1,400 1,700 1,500 1,950 1,570 2,100

10 2,400 2,800 2,640 3,300 2,820 3,760 2,870 4,100 12 3,500 4,100 4,000 5,000 4,400 5,900 4,550 6,500 14 5,400 6,300 5,920 7,400 6,400 8,500 6,650 9,500 16 7,700 9,100 9,040 11,300 10,100 13,500 10,500 15,000 18 11,900 14,000 13,600 17,000 15,000 20,000 15,400 22,000 20 15,300 18,000 17,100 21,300 18,500 24,700 18,900 27,000 24 24,650 29,000 27,680 34,600 30,000 40,100 30,800 44,000 26 24,650 29,000 27,680 34,600 30,000 40,100 30,800 44,000 28 34,850 41,000 37,600 47,000 44,300 59,200 44,500 63,500 30 39,950 47,000 42,960 53,700 50,800 67,700 52,500 75,000 32 45,000 53,000 48,800 61,000 57,600 76,800 58,800 84,000 34 45,000 53,000 48,800 61,000 57,600 76,800 58,800 84,000 36 54,000 64,000 64,800 81,000 73,500 98,000 77,000 110,000 40 62,000 73,000 73,600 92,000 82,500 110,000 84,700 121,000 42 71,000 83,000 84,000 105,000 95,250 127,000 101,000 143,000 48 98,000 115,000 121,600 152,000 142,500 190,000 151,900 217,000 54 136,000 160,000 169,600 212,000 198,000 265,000 211,400 302,000 60 Please Consult Factory

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 150 - Torques (Lb-in) Series 40/41/4A Fire Safe - Valve Differential Pressure (psig)

Valve Size

Inches

Less than 150 psig >150-200 psig >200-250 psig >250-285 psig

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

2.5 680 720 690 770 700 810 710 840 3 750 800 760 830 770 870 780 900 4 850 900 880 980 890 1,050 910 1,100 5 1,420 1,500 1,470 1,630 1,500 1,750 1,600 1,850 6 1,660 1,750 1,690 1,880 1,800 2,000 1,900 2,100 8 2,600 2,800 2,690 2,950 2,750 3,100 2,860 3,200

10 3,900 4,200 4,100 4,530 4,250 4,860 4,400 5,100 12 6,500 6,900 6,600 7,350 6,700 7,790 6,900 8,100 14 12,300 13,000 12,600 14,000 13,200 15,500 13,600 17,000 16 15,200 16,000 15,800 17,600 16,300 19,200 16,320 20,400 18 18,000 19,000 18,900 21,000 19,000 22,500 19,200 24,000 20 21,800 23,000 22,500 25,000 23,800 28,000 28,800 36,000 24 31,000 33,000 34,200 38,000 37,400 44,000 50,400 63,000

Please Consult Factory

Series 40/41/4A Metal Seated - Valve Differential Pressure (psig)

2.5 614 646 624 694 631 727 640 758

3 674 723 683 745 689 781 702 815 4 765 814 790 877 800 947 821 996 5 1,271 1,347 1,320 1,474 1,350 1,579 1,445 1,669 6 1,496 1,582 1,528 1,700 1,615 1,806 1,701 1,884 8 2,343 2,509 2,432 2,661 2,489 2,781 2,563 2,886

10 3,502 3,772 3,711 4,077 3,808 4,369 3,982 4,585 12 5,863 6,176 5,966 6,652 6,030 7,003 6,189 7,266 14 11,119 11,752 11,403 12,614 11,946 14,012 12,294 15,368 16 13,726 14,368 14,220 15,928 14,735 17,299 14,770 18,380 18 16,236 17,043 17,067 18,816 17,195 20,363 17,338 21,672 20 19,685 20,723 20,340 22,575 21,491 25,116 25,834 32,364 24 27,962 29,865 30,746 34,276 33,585 39,600 45,108 56,700 30 Please Consult Factory

LarkinD Line

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 300 - Torques (Lb-in) Series 42/43/4B Standard - Valve Differential Pressure (psig)

Valve Size

Inches

Less than 150 psig >150-350 psig >350-550 psig >550-740 psig Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

2 Please Consult Factory 447 559

2.5 170 200 290 360 380 510 470 670

3 185 220 310 380 400 530 490 690 4 270 320 420 530 550 730 700 1,000 5 550 650 1,000 1,250 1,390 1,850 1,800 2,550 6 850 1,000 1,320 1,650 1,720 2,300 2,100 3,000 8 1,580 1,850 2,480 3,100 3,230 4,300 3,700 5,300

10 2,800 3,300 4,400 5,500 5,700 7,600 7,000 10,000 12 4,250 5,000 6,640 8,300 8,630 11,500 10,500 15,000 14 7,300 8,600 10,720 13,400 13,700 18,300 15,400 22,000 16 11,900 14,000 17,200 21,500 21,800 29,000 26,600 38,000 18 15,300 18,000 21,600 27,000 27,100 36,100 31,500 45,000 20 20,400 24,000 29,400 36,700 37,000 49,300 42,700 61,000 24 32,300 38,000 45,600 57,000 57,500 76,700 66,500 95,000 30 68,000 80,000 101,600 127,000 129,000 172,000 147,000 210,000 36 101,150 119,000 144,000 180,000 180,000 240,000 203,000 290,000 40 115,600 136,000 168,000 210,000 222,000 296,000 278,600 398,000 48 127,500 150,000 217,600 272,000 321,000 428,000 403,200 576,000 54 Please Consult Factory

Series 42/43/4B Fire Safe - Valve Differential Pressure (psig)

2.5 680 720 775 860 860 1,010 880 1,100

3 750 800 855 950 935 1,100 960 1,200 4 850 900 1,080 1,200 1,275 1,500 1,360 1,700 5 1,420 1,500 2,070 2,300 2,635 3,100 2,880 3,600 6 2,000 2,100 2,610 2,900 3,150 3,700 3,440 4,300 8 3,000 3,150 3,870 4,300 4,675 5,500 4,960 6,200

10 6,900 7,300 9,180 10,200 11,050 13,000 12,000 15,000 12 10,450 11,000 13,200 14,700 15,640 18,400 16,800 21,000 14 18,050 19,000 21,600 24,000 22,100 26,000 22,400 28,000 16 26,600 28,000 34,200 38,000 37,400 44,000 39,200 49,000

Please Consult Factory

Series 42/43/4B Metal Seated - Valve Differential Pressure (psig)

2.5 611 650 700 771 776 905 795 990

3 674 721 766 852 837 993 869 1,080 4 768 812 970 1,082 1,150 1,353 1,228 1,525 5 1,207 1,275 1,760 1,955 2,240 2,635 2,448 3,060 6 1,792 1,884 2,354 2,622 1,939 3,330 3,106 3,849 8 2,712 2,822 3,479 3,892 4,193 4,961 4,454 5,586

10 6,245 6,607 8,234 9,200 9,923 11,648 10,752 13,470 12 9,405 9,845 11,840 13,304 14,076 16,523 15,170 19,005 14 16,191 17,081 19,440 21,720 19,824 23,452 20,115 25,116 16 24,020 25,284 30,917 34,352 33,510 39,424 35,476 44,198

Please Consult Factory

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 600 - Torques (Lb-in)

Series 44/45 Standard - Valve Differential Pressure (psig) Valve Size

Inches

Less than 150 psig >150-600 psig >600-1050 psig >1050-1480 psig

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

3 400 480 700 870 900 1,200 1,000 1,450 4 850 960 1,280 1,600 1,580 2,100 1,900 2,700 6 1,450 1,700 2,560 3,200 3,450 4,600 4,100 5,800 8 3,500 4,100 5,760 7,200 7,600 10,100 9,800 14,000

10 7,100 8,300 9,600 12,000 13,500 18,000 16,800 24,000 12 10,100 11,800 11,200 14,000 19,500 26,000 21,000 30,000 14 11,900 14,000 19,200 24,000 24,800 33,000 30,000 43,000 16 14,000 16,500 28,400 35,500 34,500 46,000 45,500 65,000 18 16,200 19,000 34,400 43,000 49,000 65,000 64,400 92,000 20 21,300 25,000 45,600 57,000 66,000 88,000 87,000 124,000 24 33,000 39,000 71,000 89,000 94,000 125,000 123,000 175,000 30 71,000 83,000 137,000 172,000 180,000 240,000 217,000 310,000

Series 44/45 Fire Safe - Valve Differential Pressure (psig)

Please Consult Factory

Series 44/45 Metal Seated - Valve Differential Pressure (psig)

Please Consult Factory

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 150 - Torques (N-m) Series 40/41/4A Standard - Valve Differential Pressure (Bar)

Valve Size mm

Less than 10.3 Bar >10.3-14 Bar >14-17.2 Bar >17.2-20 Bar

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

50 Please Consult Factory 23 29 65 19 23 21 27 24 32 24 34 80 21 25 24 29 25 34 26 36

100 31 36 34 42 36 47 36 52 125 62 73 72 90 80 106 82 118 150 78 92 87 108 93 124 95 136 200 145 170 158 192 170 220 177 237 250 271 316 411 373 319 425 324 463 300 396 463 452 565 497 667 514 735 350 610 712 669 836 723 961 751 1,074 400 870 1,028 1,022 1,277 1,141 1,526 1,187 1,695 450 1,345 1,582 1,537 1,921 1,695 2,260 1,740 2,486 500 1,729 2,034 1,932 2,407 2,091 2,791 2,136 3,051 600 2,785 3,277 3,128 3,910 3,390 4,531 3,480 4,972 650 2,785 3,277 3,128 3,910 3,390 4,531 3,480 4,972 700 3,938 4,633 4,249 5,311 5,006 6,690 5,029 7,176 750 4,514 5,311 4,854 6,068 5,740 7,650 5,933 8,475 800 5,085 5,989 5,514 6,893 6,509 8,678 6,644 9,492 850 5,085 5,989 5,514 6,893 6,509 8,678 6,644 9,492 900 6,102 7,232 7,322 9,153 8,306 11,074 8,701 12,430

1,000 7,006 8,249 8,317 10,396 9,323 12,430 9,571 13,673 1,050 8,023 9,379 9,492 11,865 10,763 14,351 11,413 16,159 1,200 11,074 12,995 13,741 17,176 16,103 21,470 17,165 24,521 1,350 15,368 18,080 19,165 23,956 22,374 29,945 23,888 34,126 1,500 Please Consult Factory

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 150 - Torques (N-m) Series 40/41/4A Fire Safe - Valve Differential Pressure (Bar)

Valve Size mm

Less than 10.3 Bar >10.3-14 Bar >14-17.2 Bar >17.2-20 Bar

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

65 77 81 78 87 79 92 80 95 80 85 90 86 94 87 98 88 102

100 96 102 99 111 101 119 103 124 125 160 170 166 184 170 198 181 209 150 188 198 191 212 203 226 215 237 200 294 316 304 333 311 350 323 362 250 441 475 463 512 480 549 497 576 300 735 780 746 831 757 880 780 915 350 1,390 1,469 1,424 1,582 1,492 1,752 1,537 1,921 400 1,718 1,808 1,785 1,989 1,842 2,170 1,844 2,305 450 2,034 2,147 2,136 2,373 2,147 2,543 2,170 2,712 500 2,463 2,599 2,543 2,825 2,689 3,164 3,254 4,068 600 3,503 3,729 3,865 4,294 4,226 4,972 5,695 7,119

Please Consult Factory

1,000 1,050

Series 40/41/4A Metal Seated - Valve Differential Pressure (Bar) 65 69 73 71 78 71 82 72 86 80 76 82 77 84 78 88 79 92

100 86 92 89 99 90 107 93 112 125 144 152 149 166 153 178 163 189 150 169 179 173 192 182 204 192 213 200 265 283 275 301 281 314 290 326 250 396 426 419 461 430 494 450 518 300 662 698 674 752 681 791 699 821 350 1,256 1,328 1,288 1,425 1,350 1,583 1,389 1,736 400 1,551 1,623 1,607 1,800 1,665 1,955 1,669 2,077 450 1,834 1,926 1,928 2,126 1,943 2,301 1,959 2,449 500 2,224 2,341 2,298 2,551 2,428 2,838 2,919 3,657 600 3,159 3,374 3,474 3,873 3,795 4,474 5,097 6,406 750 Please Consult Factory

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 300 - Torques (N-m) Series 42/43/4B Standard - Valve Differential Pressure (Bar)

Valve Size mm

Less than 10.3 Bar >10.3-24 Bar >24-38 Bar >38-51 Bar Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

50 Please Consult Factory 51 63 65 19 23 33 41 43 58 53 76 80 21 25 35 43 45 60 55 78

100 31 36 47 60 62 82 79 113 125 62 73 113 141 157 209 203 288 150 96 113 149 186 194 260 237 339 200 179 209 280 350 365 486 418 599 250 316 373 497 622 644 859 791 1,130 300 480 565 750 938 975 1,300 1,187 1,695 350 825 972 1,211 1,514 1,548 2,068 1,740 2,486 400 1,345 1,582 1,944 2,430 2,463 3,277 3,006 4,294 450 1,729 2,034 2,441 3,051 3,062 4,079 3,560 5,085 500 2,305 2,712 3,322 4,147 4,181 5,571 4,825 6,893 600 3,650 4,294 5,153 6,441 6,498 8,667 7,515 10,735 750 7,684 9,040 11,481 14,351 14,577 19,436 16,611 23,730 900 11,430 13,447 16,272 20,340 20,340 27,120 22,939 32,770

1,000 13,063 15,368 18,984 23,730 25,086 33,448 31,482 44,974 1,200 14,408 16,950 24,589 30,736 36,273 48,364 45,562 65,088 1,350 Please Consult Factory

Series 42/43/4B Fire Safe - Valve Differential Pressure (Bar) 65 77 81 88 97 97 114 99 124 80 85 90 97 107 106 124 108 136

100 96 102 122 136 144 170 154 192 125 160 170 234 260 298 350 325 407 150 226 237 295 328 356 418 389 486 200 339 356 437 486 528 622 560 701 250 780 825 1,037 1,153 1,249 1,469 1,356 1,695 300 1,181 1,243 1,492 1,661 1,767 2,079 1,898 2,373 350 2,040 2,147 2,441 2,712 2,497 2,938 2,531 3,164 400 3,006 3,164 3,865 4,294 4,226 4,972 4,430 5,537

Please Consult Factory

Series 42/43/4B Metal Seated - Valve Differential Pressure (Bar) 65 69 73 79 87 88 102 90 112 80 76 81 87 96 95 112 98 122

100 87 92 110 122 130 153 139 172 125 136 144 199 221 253 298 277 346 150 202 213 266 296 219 376 351 435 200 306 319 393 440 474 561 503 631 250 706 746 930 1,040 1,121 1,316 1,215 1,522 300 1,063 1,112 1,338 1,503 1,590 1,867 1,714 2,147 350 1,829 1,930 2,196 2,454 2,240 2,650 2,273 2,838 400 2,714 2,857 3,493 3,881 3,786 4,454 4,008 4,994

Please Consult Factory

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 600 - Torques (N-m) Series 44/45 Standard - Valve Differential Pressure (Bar)

Valve Size mm

Less than 10.3 Bar >10.3-41.4 Bar >41.4-72.4 Bar >72.4-102 Bar

Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream Retainer Upstream Retainer Downstream

80 45 54 79 98 102 136 113 164 100 96 108 145 181 179 237 215 305 150 164 192 289 362 390 520 463 655 200 396 463 651 814 859 1,141 1,107 1,582 250 802 938 1,085 1,356 1,526 2,034 1,898 2,712 300 1,141 1,333 1,266 1,582 2,204 2,938 2,373 3,390 350 1,345 1,582 2,170 2,712 2,802 3,729 3,390 4,859 400 1,582 1,865 3,209 4,012 3,899 5,198 5,142 7,345 450 1,831 2,147 3,887 4,859 5,537 7,345 7,277 10,396 500 2,407 2,825 5,153 6,441 7,458 9,944 9,831 14,012 600 3,729 4,407 8,023 10,057 10,622 14,125 13,899 19,775 750 8,023 9,379 15,481 19,436 20,340 27,120 24,521 35,030

Series 44/45 Fire Safe - Valve Differential Pressure (Bar)

Please Consult Factory

Series 44/45 Metal Seated - Valve Differential Pressure (Bar)

Please Consult Factory

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

DYNAMIC TORQUES

When a media flows through a butterfly valve, static pressure does not act uniformly on the surfaces of the valve disc Dynamic torque will cause rotary motion when unchecked by the actuator or manual operator possibly resulting in opening or closing of the valve If the dynamic torque is of a magnitude that is greater than the bearing and packing friction torque and there is no actuator in place to maintain disc position, the opening or closing action could result in injury to operating personnel or an interruption of the process Sudden closure (slamming) can cause water hammer damage in lines carrying liquid

In high performance butterfly valves which have the disc offset from the stem and have non-symmetrical disc faces, dynamic torque acts to close the valve if the valve is installed with the seat retainer downstream, but can act to close or open the valve, depending on the position of the disc, if the seat retainer is upstream.

Dynamic torque should be calculated as part of the valve actuator sizing procedure or to determine if hand lever operation is acceptable In this regard, the total torque of all service conditions must be considered

The total torque when the disc is in the seat consists of:

1 Seating torque 2 Stem packing torque 3 Eccentricity torque 4 Stem bearing torque

The total torque when the disc is in the seat is published as seating/unseating torque When the disc is out of the seat, the total torque consists of dynamic torque, stem packing torque, and stem bearing torque

Total torque changes with the disc position Maximum total torque can occur at shutoff (disc in the seat), at breakaway (motion initiation), or at any open disc position where the product of valve pressure drop and dynamic torque coefficient peaks in combination with prevailing bearing and packing torque

Estimating Dynamic Torque

Dynamic torque can be estimated using the following empirical equations:

Liquid Flow:

Imperial Td (Lb-in) = Ct D³ p

Metric Td (N-m) = 0001 Ct D³ p

Gas Flow:

Imperial Td (Lb-in) = Ct D³ Y p

Metric Td (N-m) = 0001 Ct D³ Y p

Dynamic Torque - Terminology Ct - dynamic torque coefficient

(see graphs and tables on page 11 for values of Ct ) Positive value of Ct means that the dynamic torque acts to close the valve and a negative value of Ct to open the valve

D - nominal valve size (in or mm)

Fk - ratio of specific heat factor (dimensionless) Fk = k/1 40 or Fk = 1 for air k - ratio of specific heat (dimensionless) p - effective pressure drop across the valve (psi or bar) p1 - valve inlet pressure (psia or bar abs )

Td - dynamic torque (Lb-in or N-m) x - x = p/p1

Y - gas expansion factor (dimensionless) Y = 1 – x / (3 Fk xt) xt - gas critical pressure ratio (dimensionless) Values of xt change with disc position and are identical for seat retainer upstream and downstream

º Open xt º Open xt

10º 0.46 55° 0.31

15º 0.46 60° 0.28

20º 0.46 65° 0.27

25° 0.45 70° 0.25

30° 0.44 75° 0.24

35° 0.42 80° 0.22

40° 0.39 85° 0.21

45° 0.35 90º 0.19

50° 0.33

Pressure Distribution

FLOW

FLOW

Seat Retainer Upstream

Seat Retainer Downstream

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

Angle of Opening Ct Down

0.15

0.10

0.05

-0.05

-0.10

-0.15

-0.20

-0.25

-0.30

-0.35

-0.40

Ct Values with the Seat Retainer Up Stream Bray/McCannalok Dynamic Torque Coefficient

Seat Retainer Upstream

D yn am ic

T or qu e

Co ef fic ie nt D yn am ic T or qu e Co ef fic ie nt

0˚ 10˚ 15˚ 20˚ 25˚ 30˚ 35˚ 40˚ 45˚ 50˚ 55˚ 60˚ 65˚ 70˚ 75˚ 80˚ 85˚ 90˚ .012.0 .022 .031 .044 .058 .073 .088 .114 .141 .176 .212 .260 .308 .370 .431 .496 .362

0.55

0.50

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

Ct Values with the Seat Retainer Down Stream Bray/McCannalok Dynamic Torque Coefficient

Seat Retainer Downstream

Angle of Opening Ct up

0˚ 10˚ 15˚ 20˚ 25˚ 30˚ 35˚ 40˚ 45˚ 50˚ 55˚ 60˚ 65˚ 70˚ 75˚ 80˚ 85˚ 90˚ .015.0 .018 .020 .023 .027 .037 .046 .055 .063 .078 .086 .093 .100 .084 .032 -.17 -.37

DYNAMIC TORQUE COEFFICIENT

Figure 1 - Seat Retainer Downstream

Figure 2 - Seat Retainer Upstream

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

For Condition Use Note

Subchoked Flow

Pipe and Valve Size Equal

• Nominal Valve Size

• Valve Pressure Drop

• Ct from graphs/tables on page 21 and page 20

With Pipe Reducers

• Nominal Valve Size

• Ct from graphs/tables on page 21 and page 20

• Valve Pressure Drop as if valve were installed in valve-sized pipe with same flow rate

Choked Flow

Pipe and Valve Size Equal

• Nominal Valve Size

• Ct from graphs/tables on page 21 and page 20

• Actual Pressure drop through valve.

If actual pressure drop at the choked condition is not known, estimate by evaluating the pressure in the piping at the valve outlet needed to sustain the choked flow rate through the piping downstream of the valve; then subtracting it from the valve inlet pressure.

With Pipe Reducers

• Nominal Valve Size

• Ct from graphs/tables on page 21 and page 20

• Actual pressure drop through valve/reducer assembly.

If the pressure drop at the choked condition is not known, estimate the line pressure just downstream of the valve/ reducer assembly which is needed to sustain the choked flow rate of the valve/reducer assembly through the downstream piping; then subtract this pressure from the line pressure just ahead of the valve/reducer assembly, to get the actual pressure drop.

For Condition Use Note

Subchoked Flow

Pipe and Valve Size Equal

• Nominal Valve Size

• Valve Pressure Drop

• Ct from graphs/tables on page 21 and page 20

With Pipe Reducers

• Nominal Valve Size

• Ct from graphs/tables on page 21 and page 20

• Valve Pressure Drop (and expansion factor Y) as if valve were installed in valve-sized pipe with same flow rate.

In calculating Y, use the line pressure just upstream of the inlet reducer for p1 and xt from the table on page 11.

Choked Flow

Pipe and Valve Size Equal

• Nominal Valve Size

• Gas expansion factor Y of 2/3

• Ct from graphs/tables on page 21 and page 20

• p = p1 Fk xt

Use xt from the table on page 11.

With Pipe Reducers

• Nominal Valve Size

• Gas expansion factor Y of 2/3

• Ct from graphs/tables on page 21 and page 20

• p = p1 Fk xt

Use the line pressure just upstream of the inlet reducer for p1 and xt from the table page 11 in calculating p, on page 13

SUBCHOKED AND CHOKED FLOW

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

SUBCHOKED LIQUID FLOW, LINE-SIZE VALVE

Example Calculations Data A 24” class 150 McCannalok is to be installed in a 24” line carrying water It has been determined that the flow is not choked and the following pressure drops through the valve have been calculated:

• 75 psi with the valve 20 degrees open

• 70 psi with the valve 30 degrees open

• 35 psi with the valve 40 degrees open

• 3 5 psi with the valve 55 degrees open

• 1 1 psi with the valve 60 degrees open

• 20 psi with the valve 70 degrees open

• 05 psi with the valve 80 degrees open

• 03 psi with the valve 90 degrees open

Estimate the maximum dynamic torque in Lb-in for the valve considering installation with the seat retainer upstream

Td = Ct D³ p

Substituting produces following results: • 20 degrees, Td = 020 x 24³ x 75 = 20,700 Lb-in (tends to close the valve)

• 30 degrees, Td = 027 x 24³ x 70 = 26,100 Lb-in

• 40 degrees, Td = 046 x 24³ x 35 = 22,300 Lb-in

• 55 degrees, Td = 078 x 24³ x 3 5 = 3,800 Lb-in

• 60 degrees, Td = 086 x 24³ x 1 1 = 1,300 Lb-in

• 70 degrees, Td = 100 x 24³ x 20 = 300 Lb-in

• 80 degrees, Td = 032 x 24³ x 05 = 20 Lb-in

• 90 degrees, Td = - 369 x 24³ x 03 = -150 Lb-in

(tends to open the valve)

Thus the peak dynamic torque will occur between 30 and 40 degrees open

Verify dynamic torque at 35 degrees: Approximate pressure drop = (70+35)/2 = 52 5 psi

At 35 degrees: Td = 037 x 24³ x 52 5 = 27,000 Lb-in

The peak dynamic torque of approximately 27,000 Lb-in occurs at about 35 degrees open.

When sizing the valve operator, total torque must be considered The total torque when the disc is in the seat consists of seating torque, stem packing torque, eccentricity torque and stem bearing torque The total torque when the disc is in the seat is published as seating/ unseating torque (see pages 1-9 When the disc is out of the seat, total torque consists of dynamic torque, stem packing torque, and stem bearing torque

CHOKED GAS FLOW, REDUCED-SIZE VALVE

Example Calculations Data 20” (DN 500) class 300 McCannalok butterfly valve is installed in a 600 mm (24”) line flowing air and the disc is set at 45 degrees The flow is choked A pressure gauge tapped into the pipe just above the upstream reducer shows 24 5 bar

Estimate the dynamic torque in N-m, given that the seat retainer is installed downstream.

D = 500 mm

Fk = 1 0

Ct = 114

Y = 667 for choked flow p1 = 24 5 + 1 0 = 25 5 bar absolute, (1 atm = 1 013 bar, i e about 1 0 bar) xt at 45º = 35

Calculations:

p = p1 Fk xt Td = 0001 Ct D³ Y p p = 25 5 x 1 0 x 35 = 8 9 bar Td = 0001 x 114 x 500³ x 667 x 8 9 = 8,500 N-m

Thus the dynamic torque at 45º open is about 8,500 N-m, and acts to close the valve.

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

Valve Size inches

ASME 150 ASME 300 ASME 600

Series S40/41/4A Series S42/43/4B Series 44/45

2 1,347 Please Consult Factory

2.5 1,968 1,968 Please Consult Factory

3 1,968 1,968 3,368

4 1,968 1,968 5,630

5 3,368 3,368 Please Consult Factory

6 3,368 5,630 9,945

8 5,544 10,292 27,818

10 10,251 18,511 64,635

12 14,454 27,818 81,314

14 27,818 64,635 136,042

16 64,635 136,042 221,381

18 81,314 136,042 375,962

20 136,042 149,811 550,204

24 149,811 375,962 802,018

26 149,811 Please Consult Factory

28 221,381 Please Consult Factory

30 375,962 771,674 Please Consult Factory

32 375,962 Please Consult Factory

34 375,962 Please Consult Factory

36 431,471 802,018

40 771,674 1,484,117

42 771,674 1,484,117

48 802,018 1,622,749

54 1,484,117 2,364,969

60 1,622,749

* Based on stem Material Code 54P (17-4 PH stainless steel, ASTM A564 Type 630 H1150D)

MAXIMUM ALLOWABLE STEM TORQUES (Lb-in)* Standard, Fire Safe and Metal Seated Valves

LarkinD Line

LarkinD Line

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

Valve Size mm

ASME 150 ASME 300 ASME 600

Series S40/41/4A Series S42/43/4B Series 44/45

50 152 Please Consult Factory

65 222 222 Please Consult Factory

80 222 222 380

100 222 222 636

125 380 380 Please Consult Factory

150 380 636 1,124

200 626 1,163 3,143

250 1,158 2,091 7,303

300 1,633 3,143 9,187

350 3,143 7,303 15,371

400 7,303 15,371 25,013

450 9,187 15,371 42,478

500 15,371 16,926 62,165

600 16,926 42,478 90,616

650 16,926 Please Consult Factory

700 25,013 Please Consult Factory

750 42,478 87,187 Please Consult Factory

800 42,478 Please Consult Factory

850 42,478 Please Consult Factory

900 48,750 90,616

1000 87,187 167,683

1050 87,187 167,683

1200 90,616 183,346

1350 167,683 267,206

1500 183,346

* Based on stem Material Code 54P (17-4 PH stainless steel, ASTM A564 Type 630 H1150D)

MAXIMUM ALLOWABLE STEM TORQUES (N-m)* Standard, Fire Safe and Metal Seated Valves

LarkinD Line

LarkinD Line

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

VALVE SIZING COEFFICIENTS (Cv)

• Cv stands for Valve Sizing Coefficient

• Cv varies with the valve size, angle of opening and the manufacturer’s valve style

• Cv is defined as the volume of water in USGPM that will flow through a given restriction or valve opening with a pressure drop of one (1) psi at room temperature

ASME 150 Series 40/41/4A - Valve Sizing Coefficient (Cv) Valve Size

Inches

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 2 87 77 65 51 37 25 14 8 6

2 .5 160 136 100 78 50 30 16 8 3 3 185 178 155 123 87 56 32 14 5 4 375 365 315 250 175 115 63 31 10 5 790 675 500 360 238 146 78 41 16 6 1,350 1,070 750 510 330 218 140 81 35 8 2,800 2,230 1,590 1,060 685 456 280 165 65

10 4,300 3,450 2,430 1,630 1,050 700 450 250 100 12 6,650 5,330 3,750 2,530 1,630 1,080 700 390 155 14 7,650 6,100 4,300 2,900 1,890 1,250 810 450 175 16 9,800 7,860 5,510 3,700 2,420 1,530 1,020 580 230 18 10,500 9,100 6,960 5,100 3,520 2,220 1,180 500 170 20 13,500 11,700 8,800 6,500 4,500 2,820 1,530 640 200 24 20,000 17,100 12,800 9,570 6,640 3,880 2,200 920 240 26 20,000 17,100 12,800 9,570 6,640 3,880 2,200 920 240 28 28,000 23,900 18,200 13,500 9,300 5,700 3,100 1,300 290 30 32,000 27,300 20,900 15,500 10,700 6,700 3,600 1,510 320 32 34,000 29,100 22,300 16,500 11,400 7,150 3,850 1,610 340 34 34,000 29,100 22,300 16,500 11,400 7,150 3,850 1,610 340 36 48,500 41,100 31,700 23,200 16,400 10,200 5,430 2,260 480 40 62,000 55,200 44,000 33,300 23,800 15,200 8,600 3,520 670 42 65,000 58,000 46,100 35,000 25,000 16,000 9,000 3,700 700 48 91,000 80,900 63,700 43,600 29,100 20,000 11,000 4,600 920 54 125,000 111,000 87,500 60,000 40,000 27,500 15,000 6,000 1,200 60 160,000 140,000 105,000 75,000 50,000 31,000 17,000 7,000 1,400

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 300 Series 42/43/4B - Valve Sizing Coefficient (Cv) Valve Size

Inches

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 2 87 77 65 51 37 25 14 8 6

2.5 160 136 100 78 50 30 16 8 3 3 185 178 155 123 87 56 32 14 5 4 375 365 315 250 175 115 63 31 10 5 790 675 500 360 238 146 78 41 16 6 1,000 875 710 530 370 240 138 79 26 8 2,000 1,720 1,360 950 630 405 240 121 47

10 2,650 2,250 1,740 1,200 780 510 295 150 61 12 4,000 3,400 2,500 1,690 1,100 710 430 220 92 14 4,100 3,500 2,600 1,770 1,200 830 490 240 100 16 7,800 6,540 4,550 2,970 1,840 1,160 730 420 180 18 9,500 8,000 6,170 4,530 3,110 1,970 1,080 440 94 20 11,000 9,570 7,300 5,400 3,720 2,330 1,250 530 110 24 18,000 15,100 11,400 8,570 5,920 3,700 2,000 830 180 30 29,000 24,400 18,900 13,700 8,500 6,000 3,230 1,330 290 36 45,000 38,100 29,200 21,000 14,800 9,100 4,660 1,730 380 42 60,000 54,000 42,000 30,000 19,000 13,000 7,500 2,600 450 48 83,000 74,000 58,000 41,000 26,000 17,000 10,000 4,400 800 54 Please Consult Factory

ASME 600 Series 44/45 - Valve Sizing Coefficient (Cv) Valve Size

Inches

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 3 165 158 135 103 67 46 12 8 3 4 300 270 210 150 95 70 45 30 5 6 800 765 600 425 270 200 130 70 15 8 1,500 1,350 1,050 750 480 345 209 78 20

10 2,200 1,970 1,540 1,100 700 500 300 140 40 12 3,100 2,790 2,170 1,550 1,000 680 400 190 55 14 3,900 3,300 2,400 1,570 1,100 730 420 200 70 16 5,000 4,200 2,900 1,900 1,200 800 500 250 95 18 6,000 5,000 3,900 2,800 1,900 1,200 660 290 130 20 8,000 6,900 5,300 3,900 2,700 1,700 950 400 143 24 11,000 9,300 7,000 5,200 3,600 2,250 1,200 500 180 30 15,000 13,000 10,000 8,400 5,100 2,800 1,650 600 200

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 150 Series 40/41/4A - Valve Sizing Coefficient (Kv) Valve Size mm

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 50 74 65 55 43 31 21 12 7 5 65 136 116 85 67 43 26 14 7 3 80 158 152 132 105 74 48 27 12 4

100 320 311 269 213 149 98 54 26 9 125 674 576 427 307 203 125 67 35 14 150 1,152 913 640 435 281 186 119 69 30 200 2,388 1,902 1,356 904 584 389 239 141 55 250 3,668 2,943 2,073 1,390 896 597 384 213 85 300 5,672 4,546 3,199 2,158 1,390 921 597 333 132 350 6,525 5,203 3,668 2,474 1,612 1,066 691 384 149 400 8,359 6,705 4,700 3,156 2,064 1,305 870 495 196 450 8,957 7,762 5,937 4,350 3,003 1,894 1,007 427 145 500 11,516 9,980 7,506 5,545 3,839 2,405 1,305 546 171 600 17,060 14,586 10,918 8,163 5,664 3,310 1,877 785 205 650 17,060 14,586 10,918 8,163 5,664 3,310 1,877 785 205 700 23,884 20,387 15,525 11,516 7,933 4,862 2,644 1,109 247 750 27,296 23,287 17,828 13,222 9,127 5,715 3,071 1,288 273 800 29,002 24,822 19,022 14,075 9,724 6,099 3,284 1,373 290 850 29,002 24,822 19,022 14,075 9,724 6,099 3,284 1,373 290 900 41,371 35,058 27,040 19,790 13,989 8,701 4,632 1,928 409

1,000 52,886 47,086 37,532 28,405 20,301 12,966 7,336 3,003 572 1,050 55,445 49,474 39,323 29,855 21,325 13,648 7,677 3,156 597 1,200 77,623 69,008 54,336 37,191 24,822 17,060 9,383 3,924 785 1,350 106,625 94,683 74,638 51,180 34,120 23,458 12,795 5,118 1,024 1,500 136,480 119,420 89,565 63,975 42,650 26,443 14,501 5,971 1,194

VALVE SIZING COEFFICIENTS (Kv)

• Kv stands for Valve Sizing Coefficient

• Kv varies with the valve size, angle of opening and the manufacturer’s valve style

• Kv is defined as the volume of water in Cubic Meters/Hour (m3/hr) that will flow through a given restriction or valve opening with a pressure drop of one (1) bar at room temperature

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

ASME 300 Series 42/43/4B - Valve Sizing Coefficient (Kv) Valve Size mm

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 50 74 65 55 43 31 21 12 7 5 65 136 116 85 67 43 26 14 7 3 80 158 152 132 105 74 48 27 12 4

100 320 311 269 213 149 98 54 26 9 125 674 576 427 307 203 125 67 35 14 150 853 746 606 452 316 205 118 67 22 200 1,706 1,467 1,160 810 537 345 205 103 40 250 2,260 1,919 1,484 1,024 665 435 252 128 52 300 3,412 2,900 2,133 1,442 938 606 367 188 78 350 3,497 2,986 2,218 1,510 1,024 708 418 205 85 400 6,653 5,579 3,881 2,533 1,570 989 623 358 154 450 8,104 6,824 5,263 3,864 2,653 1,680 921 375 80 500 9,383 8,163 6,227 4,606 3,173 1,987 1,066 452 94 600 15,354 12,880 9,724 7,310 5,050 3,156 1,706 708 154 750 24,737 20,813 16,122 11,686 7,251 5,118 2,755 1134 247 900 38,385 32,499 24,908 17,913 12,624 7,762 3,975 1476 324

1,050 51,180 46,062 35,826 25,590 16,207 11,089 6,398 2218 384 1,200 70,799 63,122 49,474 34,973 22,178 14,501 8,530 3753 682 1,350 Please Consult Factory

ASME 600 Series 44/45 - Valve Sizing Coefficient (Kv) Valve Size mm

Disc Position (Degrees)

90º 80º 70º 60º 50º 40º 30º 20º 10º 80 141 135 115 88 57 39 10 7 3

100 256 230 179 128 81 60 38 26 4 150 735 662 519 368 234 173 112 61 13 200 1,280 1,152 896 640 409 294 178 67 17 250 1,877 1,680 1,314 938 597 427 256 119 34 300 2,644 2,380 1,851 1,322 853 580 341 162 47 350 3,327 2,815 2,047 1,339 938 623 358 171 60 400 4,265 3,583 2,474 1,621 1,024 682 427 213 81 450 5,118 4,265 3,327 2,388 1,621 1,024 563 247 111 500 6,824 5,886 4,521 3,327 2,303 1,450 810 341 122 600 9,383 7,933 5,971 4,436 3,071 1,919 1,024 427 154 750 12,795 11,089 8,530 7,165 4,350 2,388 1,407 512 171

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

PRESSURE-TEMPERATURE CHARTS - STANDARD MCCANNALOK AND FIRESAFE VALVES

-20

0 200 400 600 800 1000 1200 1400 1600

Te m pe ra tu re

º F

Pressure psig

-29

20 40 60 80 1000 Te m pe ra tu re º

C Pressure Bar

ASME 300 ASME 600ASME 150 ASME 300 ASME 600ASME 150

Stainless Steel Body with RPTFE

Seat

-20

0 200 400 600 800 1000 1200 1400 1600

-29

20 40 60 80 1000

Te m pe ra tu re

º F

Te m pe ra tu re

º C

Pressure psig

Pressure Bar

ASME 300 ASME 600ASME 150 ASME 300 ASME 600ASME 150

Carbon Steel Body with RPTFE

Seat

Figure 3

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

PRESSURE-TEMPERATURE CHARTS - STANDARD MCCANNALOK AND FIRESAFE VALVES

-20

0 200 400 600 800 1000 1200 1400 1600

Te m pe ra tu re

º F

Pressure psig

-29

20 40 60 80 1000

Te m pe ra tu re

º C

Pressure Bar

ASME 300 ASME 600ASME 150 ASME 300 ASME 600ASME 150

Stainless Steel Body with PTFE

Seat

-20

0 200 400 600 800 1000 1200 1400 1600

-29

20 40 60 80 1000

Te m pe ra tu re

º F

Te m pe ra tu re

º C

Pressure psig

Pressure Bar

ASME 300 ASME 600ASME 150 ASME 300 ASME 600ASME 150

Carbon Steel Body with PTFE

SeatFigure 4

LarkinD Line

All information herein is proprietary, confidential, and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.

The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.

The right to change or modify product design or product without prior notice is reserved.

SERIES 4X BRAY/McCANNALOK VALVES

TECHNICAL MANUAL

Te m pe ra tu re

º F

Pressure psig

Te m pe ra tu re

º C

Pressure Bar

Carbon Steel Body with Inconel

Seat

-20 0 200 400 600 800 1000 1200 1400 1600

-29

20 40 60 80 1000 120

Te m pe ra tu re

º F

Pressure psig

Te m pe ra tu re

º C

Pressure Bar

Stainless Steel Body with Inconel

Seat

-20

0 200 400 600 800 1000 1200 1400 1600

-29

20 40 60 80 1000 120

Te m pe ra tu re

º F

Pressure psig

Te m pe ra tu re

º C

Pressure Bar

Low Temperature Valve with Carbon Steel Body and Polar

Seat

-60 0 200 400 600 800 1000 1200 1400 1600

-51

20 40 60 80 1000 120

Te m pe ra tu re

º F

Pressure psig

Te m pe ra tu re

º C

Pressure Bar

Cryogenic Valve with Stainless Steel Body and Polar

Seat

-200

-320

0 200 400 600 800 1000 1200 1400 1600

-100

-50

-150

-100

-50

-150 -196

20 40 60 80 1000 120

ASME 300 ASME 600ASME 150 ASME 300 ASME…