Addendum 003 - Analytical Instrumentation - Pressure Instrumentation R1.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015265 Rev: 01

Description of Item: Pressure Instrumentation

Specification Section: 40 73 002

Deviations: See document NYCS000015383

Cover Page Information Revision History and Approvals

Tab 1 - NYCS000015450,CSS,Pressure Instrumentation,01.287 R01

INDEX:

Page 1:

Page 2:

Page 3:

Pages 4-9: Tab 2 - Ashcroft 1279 Pressure Gauge (no Iso Diaphgram) Cut Sheets R00

Pages 10-18: Tab 3 - Ashcroft 1279 Pressure Gauge (with Iso Diaphgram) Cut Sheets R00

Pages 19-21: Tab 4 - Ashcroft N-Series Pressure Switch Cut Sheet R00 (1)

Pages 22-27: Tab 5 - Ashcroft N-Series PS with Iso Diaphragm Cut Sheet R00

Pages 28-58: Tab 6 - Rosemount 3051T Pressure Transmitter Cut Sheet R00

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015450R01 Doc Title: NYCS000015450,CSS,Pressure Instrumentation,01.287 R01.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015265, Pressure Instrumentation,01.287:

L‐897, Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 40 73 02, Process Instrumentation Meters and Transmitters.

Any exceptions and clarifications to the specification section above can be found in submittal NYCS000015383, L‐897, Section 40 73 02, Es and Cs,01.287.

Pall has taken exceptions and clarifications relevant to the pressure instrumentation proposed.

Pall Corporation Membrane Filtration (MF) System

PRESSURE INSTRUMENTATION CUT SHEET

Pressure Gauges without Isolation Diaphgram

4” Dial Pressure Gauge: Vacuum-to-30 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L - 30"HG/ 0/ 30PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

30”HG/0/30 RANGE SCALE: 30”HG Vacuum to 30 (PSI)

PSI INNER DIAL SCALE: PSI

KPA OUTER DIALSCALE: KPA

4” Dial Pressure Gauge: 0 to 60 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L - 60PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

60 RANGE SCALE: 0 to 60 (PSI)

KPA OUTER DIAL SCALE: KPA

4” Dial Pressure Gauge: 0 to 160 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L - 160PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

160 RANGE SCALE: 0 to 160 (PSI)

4” Dial Pressure Gauge: 0 to 300 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L - 300PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

300 RANGE SCALE: 0 to 300 (PSI)

FEATURES

� Custom dial printing options � Micrometer adjustable pointer � PLUS™ Performance option dampens vibration, shock and pulsation effects

� Pressure range from Vacuum to 30,000 psi

TYPICAL USES

� Refineries � Chemical and petrochemical plants � Offshore oil rigs � Water and wastewater pressure control � Pulp and water � Mining and metals � Equipment skids � Specialized OEM equipment � Cryogenics

SPECIFICATIONS

Accuracy: ±0.5% of span (ASME B40.100 Grade 2A)

Size: 41⁄2˝

Range: Vacuum, Compound to 30,000 psi

Process Connection Location:

Lower, back, side, top

Process Connection: 1⁄4 NPT Male, 1⁄2 NPT Male, 9⁄16 -18 UNF-2B (high pressure connection)

Case Style: Solid front with pressure relief back

Window: Glass (STD.), acrylic, shatter proof glass, non-glare glass (OPT.)

Movement: Rotary, adjustable, 400 SS, Teflon® coated

Movement Materials: 400 SS, Teflon® coated pinion gear and segment

Dial: Aluminum, white background, black scale

Pointer: Micrometer, adjustable, aluminum

Weather Protection: Dry case: Case not sealed, recommended for weather protected environment only Liquid filled or field fillable: IP66 or NEMA 4X (S&P tube and socket), NEMA 4 (A&R tube and socket Hermetically sealed: IP66

Dampening Options: Liquid: glycerin, silicone, Halocarbon®, PLUS!™ Performance

Mounting: Stem, surface (STD.), flush, pipe, remote (OPT.)

Approvals: CRN

NON-WETTED COMPONENTS

Case Ring Pressure Relief Back

Phenolic Threaded, Polycarbonate (Meets UL 94 V-0)

Polycarbonate (Meets UL 94 V-0)

KEY BENEFITS

• Available with a wide variety of accessory and diaphragm seal assemblies

• Available with high process temperature dissipation siphons

41⁄2˝ dial size

MIN/MAX TEMPERATURE LIMITS

Version Ambient Process Storage

Dry -20°F to 200°F (-29°C to 93°C)

-20°F to 250°F (-29°C to 121°C)

-40°F to 250°F (-40°C to 121°C)

PLUS! ™ -40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

Glycerin fill 20°F to 150°F (-7°C to 66°C)

20°F to 150°F (-7°C to 66°C)

0°F to 150°F (-18°C to 66°C)

Silicone fill -40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

Halocarbon® fill

-40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

TM

WETTED COMPONENTS

Bourdon Tube Process Connection Materials Joints

316L SS 316L SS Welded

316L SS Steel Welded

K-Monel® 500 Tube Monel® 400 Welded

C510 Phos. Bronze Brass Silver brazed

Data Sheet

1279 Duragauge® Pressure Gauge of 51

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.82585

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-60PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-160 PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-300 PSI/KPA

HomR Text Box

(NO FACTORY-INSTALLED ISOLATION DIAPHRAGM)

HomR Line

ORDERING CODE Example: 451279 S SH 04 L XLL 15# Dial Size/Model Code

451279 - 4½˝ solid front 451279

System (tube and process connection)

A - Bronze tube, brass process connection, Max. pressure connection 1,000 psi

P - K-Monel® 500 tube, Monel® 400 process connection, Max. pressure 30,000 psi

R - 316L SS tube, steel process connection, Max. pressure 30,000 psi

S - 316 SS tube, 316L SS process connection, Max. pressure 30,000 psi S

Case Design

S - Solid front case, dry

SH - Solid front case, dry, hermetically sealed SH

SL - Solid front case, liquid filled (glycerin STD.)

Process Connection Sizes

02 - ¼ NPT Male, N/A for ranges over 20,000 psi

04 - ½ NPT Male, N/A for ranges over 20,000 psi 04

09 - 9⁄16-18 UNF-2B, high pressure fitting, pressures over 20,000 psi (STD.)

AM - AND 10050-4 (¼ tubing connection)

RW - SAE 7⁄16-20 Straight thread

Process Connection Location

L - Lower L

B - Back

D - Side (3 o’clock)

E - Side connection (9 o’clock)

T - Top connection

Options (If choosing an option(s) must include a “X”) (See Table 1 on page 5 for more options) X__

GV - Silicone case fill

GX - Halocarbon® case fill

LL - PLUS!™ Performance LL

NH - SS tag wired to case

PD - Acrylic window (STD. with liquid filled or hermetically sealed cases)

C4 - Individual calibration chart (in accordance with ASME B40.100:2013. Accuracy traceable to NIST)

6B - Cleaned for oxygen service

Range (coding examples only, see range table on page 3 for all standard ranges)

Single Scales

15# - 15 psi 15#

1BR - 1 bar

1KG - 1 kg/cm2

100KP - 100 kPa

Dual Scales

15#/BR - 15 psi inner scale, 1 bar outer scale

1BR/# - 1 bar inner scale, 15 psi outer scale

Data Sheet

1279 Duragauge® Pressure Gauge of 52

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.82586

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box

SL

HomR Text Box

30#HG/0/30 PSI/KPA

60 PSI/KPA

160 PSI/KPA

300 PSI/KPA

HomR Rectangle

HomR Line

HomR Line

HomR Line

HomR Text Box

SL

HomR Line

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-60PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-160 PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-300 PSI/KPA

STANDARD PRESSURE RANGES

Va cu um psi bar kPa mPa kg/cm2

30IMV N1BR N100KP N1MP N1KG

– N1/0.6BR N100/60KP 0.1/0.06MP N1/0.6KG

Co m po un d

V/15# – – – –

– N1/1.5BR N100/150KP N0.1/0.15MP N1/1.5KG

V/30# – – – –

– N1/3BR N100/300KP N0.1/0.3MP N1/3KG

V/60# – – – –

– N1/5BR N100/500KP N0.1/0.5MP N1/5KG

V/100# – – – –

– N1/9BR N100/900KP N0.1/0.9MP N1/9KG

Po si tiv e

Pr es su re

15# 1BR 100KP 0.1MP 1KG

20# – – – –

– 1.6BR 160KP 0.16MP 1.6KG

30# – – – –

– 2.5BR 250KP 0.25MP 2.5KG

60# 4BR 400KP 0.4MP 4KG

– 6BR 600KP 0.6MP 6KG

100# – – – – 120# – – – –

– 10BR 1000KP 1MP 10KG

160# – – – – 200# – – – –

– 16BR 1600KP 1.6MP 16KG

300# – – – –

– 25BR 2500KP 2.5MP 25KG

400# – – – – 500# – – – –

600# 40BR 4000KP 4MP 40KG

800# – – – –

– 60BR 6000KP 6MP 60KG

1000# – – – –

1500# 100BR 10000KP 10MP 100KG

2000# – – – –

– 160BR 16000KP 16MP 160KG

3000# – – – –

– 250BR 25000KP 25MP 250KG

4000# – – – – 5000# – – – –

6000# 400BR 40000KP 40MP 400KG

8000# – – – –

– 600BR 60000KP 60MP 600KG

10000# – – – –

15000# 1000BR 100000KP 100MP 1000KG

20000# - - - -

- 1600BR - 160MP 1600KG

30000# - - - -

2500BR - 250MP 2500KG

Data Sheet

1279 Duragauge® Pressure Gauge of 52

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.8258 of 53

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.82587

HomR Rectangle

HomR Rectangle

HomR Line

HomR Line

HomR Text Box 30"HG Vacuum to +30 PSIG

HomR Text Box 0 to +60 PSIG

HomR Rectangle

HomR Line

HomR Text Box 0 to +160 PSIG

HomR Rectangle

HomR Line

HomR Text Box 0 to +300 PSIG

HomR Text Box

(USED ON RF PUMP INLET LINES)

HomR Text Box

(TYPICALLY USED ON PROCESS WATER LINES)

HomR Text Box

(USED ON INSTRUMENT SUPPLY AIR LINES)

HomR Text Box

(USED ON COMPRESSED AIR RECEIVER)

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-60PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-160 PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-300 PSI/KPA

HOLE IN PANEL

(REAR VIEW)

SHOWING USE OF LEVEL

TO LINE UP SPACER POSTS

PA

N

E L

C U

TO

U

T “A

D

IA

. 1

/6

R

IN

G O

.D

WASHER “C”

SPACER POST

(3 REQ’D)

“B” (3 REQ’D)

PANEL

CASE

FIG. 1

MOUNTING

RING

Dial Size Inches A B C D E F G H J K T V Weight oz / kg

4½ 5.81 [147.6]

3.36 [85.3]

5.07 [128.7]

1.06 [40.6]

5.375 [137]

1.62 [41.2]

3.92 [99.6]

0.73 [18.4]

0.22 [5.5]

2.62 [66.7]

0.94 [23.9]

2.625 [67]

2.5 (Dry)

3.5 (L.F.)

Gauge Size Inches

Ring O.D. "A" DIA. "B" Size of

3 Screws "C" Size of Washers

4½ 6 [152]

5.625 [148] #10-24 x 15⁄8 7⁄16 x 17⁄64 x 5⁄8

1278M Series Flush Mounting Ring

1278M Series Flush Mounting Ring. Used to flush mount gauge case 1279(*)S. Black finish (STD.); Polished SS finish (OPT.)

DIMENSIONS in [ ] are millimeters

K

B J

D

C

A

G

T 3-L dia. holes on E dia.

bolt circle

F

H

T

1/4 NPT or

1/2 NPT

M Hole in panel

LL

CC

Mounting hardware supplied by Ashcroft®

A-1 V

For reference only, consult Ashcroft for specific dimensional drawings

Data Sheet

1279 Duragauge® Pressure Gauge of 54

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.82588

HomR Rectangle

Rectangle

TABLE 1 - OPTIONS

CODE OPTION

AB Gauges calibrated to compensate for absolute pressure

DA Dial marking (text marking on the dial)

EP Maximum pointer (adjustable, N/A with liquid filled or hermetically sealed cases)

GV Silicone case fill

GX Halocarbon® case fill

HY

Hydrostatic/pneumatic testing (system pressurized to 150% of rated system pres-sure for 5 minutes. Overload stop STD.)

LL PLUS!™

NG Non-glare glass (N/A with liquid fill or hermetically sealed cases)

NH SS tag wired to case

OS Overload stop

PD Acrylic window (STD. with liquid filled or hermetically sealed cases)

SH Red set hand, stationary

SG Safety glass

TS Throttle screw (STD. with liquid filled, hermetically sealed or PLUS!™ Performance)

VS Underload stop

C4 Individual calibration chart (in accordance with ASME B40.100:2013. Accuracy traceable to NIST)

6B Cleaned for oxygen service

56 Flush mounting ring

Data Sheet

1279 Duragauge® Pressure Gauge of 54

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.8258 of 55

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.82589

HomR Line

Pressure Gauges with Isolation Diaphgrams

4” Dial Pressure Gauge: Vacuum-to-30 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L XLL - 30"HG/ 0/ 30PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

XLL OPTION: PLUS! Performance (Dry Gauge) Shock, Vibration & Dampening 30”HG/0/30 RANGE SCALE: 30”HG Vacuum to 30 (PSI)

4” Dial Pressure Gauge: 0-to-60 PSI Range Ashcroft P/N: 45-1279 S SL – 04 L XLL - 30"HG/ 0/ 30PSI /KPA

Part Number Key:

45-1279 MODEL: 4-1/2” Ashcroft Series 1279, Solid-Front S TUBE/PROCESS CONNECTION: 316SS, 316L-SS Process Connection, 30,000 PSI Maximum

SL CASE DESIGN: Solid-Front Case, Glycerin Filled (Standard Unless Superseded by Options)

04 PROCESS CONNECTION SIZE: ½” MNPT

L PROCESS CONNECTION LOCATION: Lower

XLL OPTION: PLUS! Performance (Dry Gauge) Pulsation Dampener (replaces standard Liquid Fill) 60 RANGE SCALE: 0 to 60 (PSI)

Pressure Instrumentation Diaphragm Seal (316 SS) Ashcroft P/N: 50-200 S S 04T XCF XSE

Part Number Key:

50 PROCESS CONNECTION SIZE: 1/2” NPT

200 MODEL: Type 200 Series Welded or Bonded Diaphragm Seal

S DIAPHRAGM MATERIAL: 316L-SS

S HOUSING MATERIAL: 316L-SS

04T INSTRUMENT CONNECTOIN: ½”NPT

XCF OPTION: Halocarbon Filling Fluid XSE OPTION: Stainless-Steel Clamp Rings, Flanged Ring, Clamping Bolts

NOTE: Above Ashcroft 1279 pressure gauges to have Ashcroft 50-200 Isolation Diaphragms Factory-Installed.

FEATURES

� Custom dial printing options � Micrometer adjustable pointer � PLUS™ Performance option dampens vibration, shock and pulsation effects

� Pressure range from Vacuum to 30,000 psi

TYPICAL USES

� Refineries � Chemical and petrochemical plants � Offshore oil rigs � Water and wastewater pressure control � Pulp and water � Mining and metals � Equipment skids � Specialized OEM equipment � Cryogenics

SPECIFICATIONS

Accuracy: ±0.5% of span (ASME B40.100 Grade 2A)

Size: 41⁄2˝

Range: Vacuum, Compound to 30,000 psi

Process Connection Location:

Lower, back, side, top

Process Connection: 1⁄4 NPT Male, 1⁄2 NPT Male, 9⁄16 -18 UNF-2B (high pressure connection)

Case Style: Solid front with pressure relief back

Window: Glass (STD.), acrylic, shatter proof glass, non-glare glass (OPT.)

Movement: Rotary, adjustable, 400 SS, Teflon® coated

Movement Materials: 400 SS, Teflon® coated pinion gear and segment

Dial: Aluminum, white background, black scale

Pointer: Micrometer, adjustable, aluminum

Weather Protection: Dry case: Case not sealed, recommended for weather protected environment only Liquid filled or field fillable: IP66 or NEMA 4X (S&P tube and socket), NEMA 4 (A&R tube and socket Hermetically sealed: IP66

Dampening Options: Liquid: glycerin, silicone, Halocarbon®, PLUS!™ Performance

Mounting: Stem, surface (STD.), flush, pipe, remote (OPT.)

Approvals: CRN

NON-WETTED COMPONENTS

Case Ring Pressure Relief Back

Phenolic Threaded, Polycarbonate (Meets UL 94 V-0)

Polycarbonate (Meets UL 94 V-0)

KEY BENEFITS

• Available with a wide variety of accessory and diaphragm seal assemblies

• Available with high process temperature dissipation siphons

41⁄2˝ dial size

MIN/MAX TEMPERATURE LIMITS

Version Ambient Process Storage

Dry -20°F to 200°F (-29°C to 93°C)

-20°F to 250°F (-29°C to 121°C)

-40°F to 250°F (-40°C to 121°C)

PLUS! ™ -40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

Glycerin fill 20°F to 150°F (-7°C to 66°C)

20°F to 150°F (-7°C to 66°C)

0°F to 150°F (-18°C to 66°C)

Silicone fill -40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

Halocarbon® fill

-40°F to 150°F (-40°C to 66°C)

-40°F to 200°F (-40°C to 93°C)

-40°F to 150°F (-40°C to 66°C)

TM

WETTED COMPONENTS

Bourdon Tube Process Connection Materials Joints

316L SS 316L SS Welded

316L SS Steel Welded

K-Monel® 500 Tube Monel® 400 Welded

C510 Phos. Bronze Brass Silver brazed

Data Sheet

1279 Duragauge® Pressure Gauge of 51

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.825811

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-XLL-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-XLL-60PSI/KPA

HomR Text Box

(USED WITH ISOLATION DIAPHRAGM)

HomR Line

HomR Rectangle

HomR Text Box

USE DRY GAUGE WITH LIQUID-FILLED ISOLATION DIAPHRAGM

ORDERING CODE Example: 451279 S SH 04 L XLL 15# Dial Size/Model Code

451279 - 4½˝ solid front 451279

System (tube and process connection)

A - Bronze tube, brass process connection, Max. pressure connection 1,000 psi

P - K-Monel® 500 tube, Monel® 400 process connection, Max. pressure 30,000 psi

R - 316L SS tube, steel process connection, Max. pressure 30,000 psi

S - 316 SS tube, 316L SS process connection, Max. pressure 30,000 psi S

Case Design

S - Solid front case, dry

SH - Solid front case, dry, hermetically sealed SH

SL - Solid front case, liquid filled (glycerin STD.)

Process Connection Sizes

02 - ¼ NPT Male, N/A for ranges over 20,000 psi

04 - ½ NPT Male, N/A for ranges over 20,000 psi 04

09 - 9⁄16-18 UNF-2B, high pressure fitting, pressures over 20,000 psi (STD.)

AM - AND 10050-4 (¼ tubing connection)

RW - SAE 7⁄16-20 Straight thread

Process Connection Location

L - Lower L

B - Back

D - Side (3 o’clock)

E - Side connection (9 o’clock)

T - Top connection

Options (If choosing an option(s) must include a “X”) (See Table 1 on page 5 for more options) X__

GV - Silicone case fill

GX - Halocarbon® case fill

LL - PLUS!™ Performance LL

NH - SS tag wired to case

PD - Acrylic window (STD. with liquid filled or hermetically sealed cases)

C4 - Individual calibration chart (in accordance with ASME B40.100:2013. Accuracy traceable to NIST)

6B - Cleaned for oxygen service

Range (coding examples only, see range table on page 3 for all standard ranges)

Single Scales

15# - 15 psi 15#

1BR - 1 bar

1KG - 1 kg/cm2

100KP - 100 kPa

Dual Scales

15#/BR - 15 psi inner scale, 1 bar outer scale

1BR/# - 1 bar inner scale, 15 psi outer scale

Data Sheet

1279 Duragauge® Pressure Gauge of 52

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.825812

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box

SL

HomR Text Box

30#HG/0/30 PSI/KPA

60 PSI/KPA

HomR Rectangle

HomR Line

HomR Text Box

SL

HomR Line

HomR Rectangle

HomR Line

HomR Text Box

XLL

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-XLL-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-XLL-60PSI/KPA

STANDARD PRESSURE RANGES

Va cu um psi bar kPa mPa kg/cm2

30IMV N1BR N100KP N1MP N1KG

– N1/0.6BR N100/60KP 0.1/0.06MP N1/0.6KG

Co m po un d

V/15# – – – –

– N1/1.5BR N100/150KP N0.1/0.15MP N1/1.5KG

V/30# – – – –

– N1/3BR N100/300KP N0.1/0.3MP N1/3KG

V/60# – – – –

– N1/5BR N100/500KP N0.1/0.5MP N1/5KG

V/100# – – – –

– N1/9BR N100/900KP N0.1/0.9MP N1/9KG

Po si tiv e

Pr es su re

15# 1BR 100KP 0.1MP 1KG

20# – – – –

– 1.6BR 160KP 0.16MP 1.6KG

30# – – – –

– 2.5BR 250KP 0.25MP 2.5KG

60# 4BR 400KP 0.4MP 4KG

– 6BR 600KP 0.6MP 6KG

100# – – – – 120# – – – –

– 10BR 1000KP 1MP 10KG

160# – – – – 200# – – – –

– 16BR 1600KP 1.6MP 16KG

300# – – – –

– 25BR 2500KP 2.5MP 25KG

400# – – – – 500# – – – –

600# 40BR 4000KP 4MP 40KG

800# – – – –

– 60BR 6000KP 6MP 60KG

1000# – – – –

1500# 100BR 10000KP 10MP 100KG

2000# – – – –

– 160BR 16000KP 16MP 160KG

3000# – – – –

– 250BR 25000KP 25MP 250KG

4000# – – – – 5000# – – – –

6000# 400BR 40000KP 40MP 400KG

8000# – – – –

– 600BR 60000KP 60MP 600KG

10000# – – – –

15000# 1000BR 100000KP 100MP 1000KG

20000# - - - -

- 1600BR - 160MP 1600KG

30000# - - - -

2500BR - 250MP 2500KG

Data Sheet

1279 Duragauge® Pressure Gauge of 52

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.8258 of 53

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.825813

HomR Rectangle

HomR Rectangle

HomR Line

HomR Line

HomR Text Box 30"HG Vacuum to +30 PSIG

HomR Text Box 0 to +60 PSIG

HomR Text Box

(USED ON CIP PUMP INLET LINES)

HomR Text Box

(USED ON CIP PUMP OUTLET LINES)

HomR Text Box

ASHCROFT P/N: 45-1279SSL-04L-XLL-30"HG/0/30PSI/KPA

ASHCROFT P/N: 45-1279SSL-04L-XLL-60PSI/KPA

HOLE IN PANEL

(REAR VIEW)

SHOWING USE OF LEVEL

TO LINE UP SPACER POSTS

PA

N

E L

C U

TO

U

T “A

D

IA

. 1

/6

R

IN

G O

.D

WASHER “C”

SPACER POST

(3 REQ’D)

“B” (3 REQ’D)

PANEL

CASE

FIG. 1

MOUNTING

RING

Dial Size Inches A B C D E F G H J K T V Weight oz / kg

4½ 5.81 [147.6]

3.36 [85.3]

5.07 [128.7]

1.06 [40.6]

5.375 [137]

1.62 [41.2]

3.92 [99.6]

0.73 [18.4]

0.22 [5.5]

2.62 [66.7]

0.94 [23.9]

2.625 [67]

2.5 (Dry)

3.5 (L.F.)

Gauge Size Inches

Ring O.D. "A" DIA. "B" Size of

3 Screws "C" Size of Washers

4½ 6 [152]

5.625 [148] #10-24 x 15⁄8 7⁄16 x 17⁄64 x 5⁄8

1278M Series Flush Mounting Ring

1278M Series Flush Mounting Ring. Used to flush mount gauge case 1279(*)S. Black finish (STD.); Polished SS finish (OPT.)

DIMENSIONS in [ ] are millimeters

K

B J

D

C

A

G

T 3-L dia. holes on E dia.

bolt circle

F

H

T

1/4 NPT or

1/2 NPT

M Hole in panel

LL

CC

Mounting hardware supplied by Ashcroft®

A-1 V

For reference only, consult Ashcroft for specific dimensional drawings

Data Sheet

1279 Duragauge® Pressure Gauge of 54

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.825814

HomR Rectangle

TABLE 1 - OPTIONS

CODE OPTION

AB Gauges calibrated to compensate for absolute pressure

DA Dial marking (text marking on the dial)

EP Maximum pointer (adjustable, N/A with liquid filled or hermetically sealed cases)

GV Silicone case fill

GX Halocarbon® case fill

HY

Hydrostatic/pneumatic testing (system pressurized to 150% of rated system pres-sure for 5 minutes. Overload stop STD.)

LL PLUS!™

NG Non-glare glass (N/A with liquid fill or hermetically sealed cases)

NH SS tag wired to case

OS Overload stop

PD Acrylic window (STD. with liquid filled or hermetically sealed cases)

SH Red set hand, stationary

SG Safety glass

TS Throttle screw (STD. with liquid filled, hermetically sealed or PLUS!™ Performance)

VS Underload stop

C4 Individual calibration chart (in accordance with ASME B40.100:2013. Accuracy traceable to NIST)

6B Cleaned for oxygen service

56 Flush mounting ring

Data Sheet

1279 Duragauge® Pressure Gauge of 54

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.8258 of 55

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

©2018 Ashcroft Inc. 1279_gauge_ds4.0, Rev. D, 07/18 ashcroft.com info@ashcroft.com

1.800.328.825815

HomR Line

BULLETIN DS-200

SPECIFICATIONS

Model Number: Type 200, 201, 202, 203, 204, 205, 206, 207, 208

Process Connection Size: See Table A Instrument Connection Size: 1⁄4˝, 1⁄2 NPT

Diaphragm Material: See Table B

Bottom Housing Materials: See Table C

Filling Fluid: See Table E

OPTIONS Code

316 stainless steel YT top housing

Stainless steel clamp SE rings and flanged ring

– includes 300 stainless steel clamping bolts (1500 psi max)

300 series stainless SB steel clamping bolts (max pres is 1500 psi)

Pipe plugs for flushing PU connections – pipe plugs are available in the same materials as bottom housings per Table C

5000 psi pressure rating HP Threaded inlet and metal diaphragm only

Welded instrument to DU diaphragm seal

Dual flushing connections DB (1⁄2 NPT) (Limited to 2˝ thru 3˝ flanged seals

Ring joint (Flanged seal only) RJ

Flat face (Flanged seal only) FF

Clean for gaseous oxygen 6B or strong oxidizing agent applications.

Type 200 Series Welded or Bonded Diaphragm Seal

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2013 11/2013

HOW TO ORDER:

1. From Table A...select TYPE NUMBER based on process connection, process connection size and diaphragm type/construction. (e.g., Threaded/1˝/capsule–code-10-200)

2. From Table B...select DIAPHRAGM MATERIAL. (e.g., 316L stainless steel–code S)

3. From Table C...select BOTTOM HOUSING MATERIAL. (e.g., 316 stainless steel–code S)

4. From Table D...select INSTRUMENT CONNECTION size. (e.g., 1⁄4 NPT–code 02T)

5. From Table E...select FILLING FLUID, if diaphragm seal will be attached to instrument. (e.g., Glycerin–code CG) Tylpical Code: 10–200SS–02T–CG

When isolation of the process from an instrument is required, Ashcroft offers a comprehensive line of diaphragm seals.

Seal types include threaded, flanged, in-line threaded, in-line flanged, in-line socket weld, in-line butt weld, saddle and sanitary seals. Also available is a complete offering of isolation or iso-rings and isolation or iso-spools.

APPLICATIONS

• Elevated process temperatures

• Corrosive service

• Isolation of the process for safety

• Suspended solids in the process

• Sanitary connections

• Replacement of process dead leg

• Ease of cleaning between batches

FEATURES

• A metal diaphragm ia welded to the top housing. Elastomeric diaphragms are bonded to the top housing. Either provides a double positive seal.

• A fill/bleed connection is standard, which permits filling the seal and instrument simultaneously after evacuation and allows the fill to flow into the completed unit.

• A thin Teflon PTFE gasket between the diaphragm and bottom housing ensures a leak-tight corrosion resistant seal even at high pressure.

• Top housing and pressure instrument are removable.

• Continuous-duty design will prevent loss of process fluid if pressure instrument is removed or fails.

TYPE 200 SHOWN

Welded or Bonded

Capsule � Design

HomR Rectangle

HomR Rectangle

HomR Text Box 316L-SS: Ashcroft P/N: 50-200 S S 04T XCF XSE Hastalloy: Ashcroft P/N: 50-200 H H 04T XCF XSE

HomR Rectangle

HomR Oval

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

HomR Line

Type 200 Series Welded or Bonded Diaphragm Seal

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2013 11/2013

Table A – Process Connection/Type Number Process Connection Size/Code—Inches Type Number

Size 1⁄4 1⁄2 3⁄4 1 11⁄2 2 3 4 6 8 Process Connection Code 25 50 75 10 15 20 30 40 60 80 Capsule Threaded–female NPT • • • • • 200 Threaded–female NPT (with flushing conn.) • • • • • 201 Flanged(1) • • • • • • 202 Flanged (with flushing conn.) • • • • • • 203 In-line—threaded NPT • • • • 204 Saddle • AND LARGER 205 In-line—butt weld • • • • • • 208 In-line—flanged(2) • • • • • • • • • 206 In-line—socket weld • • • • • • 207

Table E – Filling Fluid Filling Service Connection to Instrument Temperature Range °F Code Glycerin Pressure Direct Only 0/400 CG Silicone Pressure/Vacuum Direct or Flexible Line –40/600 CK

Halocarbon Pressure/Vacuum in presence Direct or Flexible Line –70/300 CF of strong oxidizing agent

Syltherm Pressure/Vacuum Direct or Flexible Line –40/750 HA

Notes:

(1) 150, 300, 600, 900, 1500 & 2500 class flanges.

(2) 1˝ 150 thru 8˝ 300 class flanges only.

(3) Metal diaphragms welded; Teflon, Kalrez & Viton diaphragms bonded.

(4) Temp limits:−40/400°F.

(5) Max. pressure: 500 psi, Temp. limits:−40/350°F.

(6) Use on applications where NACE standard MR-01-75 2003 is standard.

(7) Maximum press./temp. Threaded: 200 psi/74°F, 125 psi/125°F, 80 psi/150°F. Flanged: 75 psi/100°F.

(8) Type 202 only.

(9) Temp. Limits: –40/300°F.

(10) Only available in 1˝, 11⁄2˝, & 2˝ 150 class, Types 202 max. press./temp. – 270 psi and 150°F.

Consult factory for conditions beyond these limits.

(11) Max. pressure: 500 psi, Temp. limits:30/212°F.

(12) Maximum pressure/temp.: 200 psi and 180°F.

(13) Type 200: 1⁄4 or 1⁄2 NPT only. Larger sizes offered with solvent weld joint. N/A in 201 or 203 design.

(14) Includes Titanium top housing.

(15) Type 200 only available in 1/4 NPT or 1/2 NPT. 3/4˝ & 1˝ size avalable as solvent welded joint only.

Pressure Ratings—All 2500 psi except flanged seals are per ASME B 16.5, temperature limit determined by diaphragm, bottom housing and/or filling fluid.

Table B – Diaphragm Material Material Code 316L stainless steel S 304 stainless steel C Monel 400 P Nickel N Carpenter 20 D Tantalum U Hastelloy B G Hastelloy C 22(6) J Hastelloy C 276(6) H Teflon(4) T Viton(5) Y Kalrez(12) K Titanium(14) TI

Table D – Instrument Connection Size – NPT Code

1⁄4 02T 1⁄2 04T

Table C – Housing Materials Material Code Steel B 304L stainless steel C 316L stainless steel S Hastelloy B G Hastelloy C 22(6) J Hastelloy C 276(6) H Carpenter 20 D Monel “400” M Inconel “600” W Nickel N

PVC(7)(15) V

Tantalum clad SS(8) SU Halar coated SS(9) BH Teflon flanged steel(10) T Kynar(13)(15) KY Titanium TI

TYPE 200 SERIES WELDED

OR BONDED SEAL TYPES

Type 200 –Threaded

1⁄4, 1⁄2, 3⁄4, 1 NPT

Type 201 –Threaded with flushing connection

1⁄4, 1⁄2, 3⁄4, 1 NPT

Type 202 – Raised Face Flanged 1⁄2,̋ 3⁄4,̋ 1,̋ 11⁄2,˝ 2,̋ 3˝

Type 203 – Raised Face Flanged with flushing connection 1⁄2,̋ 3⁄4,̋ 1,̋ 11⁄2,˝ 2,̋ 3˝ (raised face only) 1 piece with flushing conection

Type 204 – In-line Threaded

1⁄4, 1⁄2, 3⁄4, 1 NPT

Type 206 – In-line Flanged 1⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2,˝ 3,˝ 4,˝ 6,˝ 8˝

Type 207 – In-line Socket Weld 1⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2˝

Type 208 – In-line Butt Weld 1⁄4,˝ 1⁄2,˝ 3⁄4,˝ 1,˝ 11⁄2,˝ 2˝

Type 205 – Saddle 3,˝ 4˝ pipe only

BULLETIN DS-20017

HomR Text Box 316L-SS: Ashcroft P/N: 50-200 S S 04T XCF XSE Hastalloy: Ashcroft P/N: 50-200 H H 04T XCF XSE

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Oval

HomR Oval

HomR Oval

HomR Oval

HomR Oval

HomR Oval

HomR Oval

A

B

C A B C in mm in mm in mm 33⁄4 (95) 27⁄8 (73) 113⁄16 (46)

A

B

C (wrench flats)

1⁄4 NPT for 1⁄4, 1⁄2 & 3⁄4 process connections, 1⁄8 NPT for 1.0 NPT process connections

A B C in mm in mm in mm 33⁄4 (95) 27⁄8 (73) 113⁄16 (46)

A

B

Nuts & flange by user

Flange A B Size Rating # in mm in mm 150 31⁄2 (89) 215⁄16 (75)

1⁄2˝ 300 or 600 33⁄4 (95) 3 (76)

900 or 1500 43⁄4 (121) 33⁄16 (81)

150 37⁄8 (98) 213⁄16 (71)

3⁄4˝ 300 or 600 45⁄8 (117) 3 (76)

900 or 1500 51⁄8 (130) 33⁄16 (81)

“E”

BOTTOM OF HOUSING

TO C OF 1/8 NPT

FLUSHING PORT

TYPES 103 & 203 ONLY)

B

C

D

A

L

Flange A B C Size Rating # in. mm in. mm in. mm

1 150 4-1/4 (100) 300 or 600 5 (127) 2-9/16 (65) 1-23/32 (69)

103 & 203 only Flange D E Size Rating # in. mm in. mm

1 150 300 or 600 1-5/8 (41) 3/8 (9)

“E”

A

D B

C BOTTOM OF HOUSING

TO C OF 1/8 NPT

FLUSHING PORT

TYPES 103 & 203 ONLY)

L

Flange A B C Size Rating # in. mm in. mm in. mm

1 900 or 1500 5-7/8 (149) 2500 6-1/4 (159) 2-7/8 (73) 2-1/4 (57)

103 & 203 only Flange D E Size Rating # in. mm in. mm

1 900 or 1500 2500 3-3/8 (86) 3/8 (9)

B

A

C

Nuts, bolts & flange by user

Flange A B C Size Rating # in mm in mm in mm

150 5 (127) 11⁄2 (38)

11/2˝ 300 or 600 61⁄4 (159) 23⁄8 (61) 11⁄2 (38)

900 or 1500 7 (178) 11⁄2 (38)

150 6 (152) 13⁄8 (35)

2˝ 300 or 600 61⁄2 (165) 115⁄16 (49) 11⁄2 (38)

900 or 1500 81⁄2 (216) 21⁄8 (54)

150 71⁄2 (191) 2 (51) 15⁄8 (41)

3˝ 300 or 600 81⁄4 (206) 21⁄16 (52) 17⁄8 (47)

900 or 1500 101⁄2 (267) 211⁄16 (68) 31⁄4 (82)

A

B C

Nuts, bolts & flange by user

11⁄2˝ 150 5 (127) 25⁄16 (59) 113⁄32 (39)

2˝ 150 6 (152) 21⁄8 (54) 19⁄16 (40)

A

B

Nuts & flange by user

1⁄4 NPT

flushing connection

Flange A B Size Rating # in mm in mm

150 31⁄2 (89) 215⁄16 (75)

1⁄2˝ 300 or 600 33⁄4 (95) 3 (76)

900 or 1500 43⁄4 (121) 33⁄16 (81)

150 37⁄8 (98) 213⁄16 (71)

3⁄4˝ 300 or 600 45⁄8 (117) 3 (76)

Type 200 – Threaded

1⁄4, 1⁄2, 3⁄4, 1 NPT

Type 201 –Threaded 1⁄4, 1⁄2, 3⁄4, 1 NPT (with flushing connection)

Type 202 – Flanged 1⁄2,˝ 3⁄4,˝

Type 202 – Flanged (raised face only) 11⁄2,˝ 2,˝ 3˝ one piece bottom housing -all materials except PVC, Teflon and Kynar

Type 202/203 – Flanged 1˝ (raised face only) one piece bottom housing, with and without flushing connection. Class 150, 300, 600

Type 202 – Flanged 1˝ (raised face only) two piece bottom housing, 11⁄2,˝ 2,˝ - PVC, Teflon and Kynar

Type 203 – Flanged 1⁄2,˝ 3⁄4˝ (with flushing connection)

Type 202/203 – Flanged 1˝ (raised face only) one piece bottom housing, with and without flushing connection. Class 900, 1500, 2000

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2013 11/2013

DIMENSIONS

BULLETIN DS-20018

HomR Rectangle

Pressure Indicating Switch (no Isolation Diaphragm)

Ashcroft N-Series Electronic Pressure Switch

Ashcroft P/N: NPI-N4DC-S06-200 PSI

Part Number Key:

NPI FUNCTION: Single Setpoint, Adjustable Dead Band, Process & Setpoint Indication N4 ENCLOSURE: Watertight, NEMA 3, 4, 4X, 13 and IP66

D OUTPUT: SPDT Relay, 10A @ 250 VAC, 10A @ 30 VDC

C POWER REQUIREMENT: 24 VDC

SO6 PRESSURE PORT: ½” NPT Male ¼” & NPT Female 200 PSI NOMINAL RANGE: 200 PSI / 10-200 PSI Setpoint Limits, 400 PSI Proof, 1600 PSI Burst

IDEAL FOR PRESSURE ALARM,

SHUTDOWN, CONTROL ON –

• Machine tools

• Injection molding machines

• Presses

• Pumps

• Hydraulic systems

• Turbines and compressors

• Pipelines

• Most process applications

• All high-cycle applications

N-Series Electronic Pressure Switches

Ashcroft® N-Series electronic pressure switches have proven reliable in the tough-est industrial applications. The pressure sensor is a standard Ashcroft K-Series thin film transducer. The signal developed in the transducer is processed on a confor-mal coated printed circuit board to pro-duce an output to a high quality electro-mechanical relay, which is rated for 10,000,000 cycles at rated load! The result is a long lasting pressure switch that will outlast mechanical switches in high cycle applications such as metal stamping presses, plastic injection molding machines, and other machine tool and special equipment. N-Series also features narrow, adjust-able deadbands that can be adjusted to less that 0.5% of range, solv-ing many pipeline and elevated tank appli-cations that are out of the reach of mechanical products.

The indicating model is ideally suited for applications where both a pressure indica-tor and a switch output for alarm, shut-down, control or interlock are needed.

Sludge and slurry applications in waste-water and pulp and paper mills often require costly diaphragm seals to isolate instruments from the clogging effects of the process. You can save money by installing N-Series with indication on a single seal.

You can even set the switch set and reset points on a test bench without pressure on the system, using the indicator and status lights. Look for these additional features.

BULLETIN SW15

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2008 07/14

PERFORMANCE SPECIFICATIONS

Ashcroft Model: N-Series Accuracy Class (F.S.): 1.0% Nonlinearity Terminal Point* ±0.7% B.F.S.L. ±0.4% Hysteresis ±0.2% Nonrepeatability ±0.07% Interchangeability ±1.0% *Includes hysteresis Stability: ±0.5% F.S./year non-cumulative Durability: 108 cycles 20/80% F.S. with negligible performance change

Response time: Less than 5m sec

ENVIRONMENTAL CHARACTERISTICS

Temperature Limits:

Storage –65/+250°F Operating –20/+180°F Compensated –20/+160°F Thermal Coefficients (70°F ref.):

Accuracy Zero and Span 1.0% ±0.040% F.S./°F

ELECTRICAL SPECIFICATIONS

Output Signal: Supply Voltage:

4-20mA (2 wire) 36 Vdc unregulated Reverse polarity protected.

Zero Offset: ±1.0%F.S.

MECHANICAL SPECIFICATIONS

Standard Construction Materials:

Wetted Parts:

Diaphragm — 17-4PH SS Pressure Connection —316SS

Vmin = 12V+ [.022A*(R L)] *includes a 10% safety factor

RL = RS + RW

RL = Loop Resistance (ohms) RS = Sense Resistance (ohms) RW = Wire Resistance (ohms)

Load Limitations 4-20mA Output

Loop Resistance (Ω)

0 10 12 20 30 36 40

OPERATING

REGION

HomR

Ashcroft P/N: NPI-N4DC-SO6-200 PSI

BULLETIN SW15

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2008 07/14

N-Series Electronic Pressure Switches

N-SERIES PRESSURE SWITCH MODEL NUMBER:

To specify the exact switch desired select entries from appropriate tables as shown in example below.

N P A N 4 L S 0 1 X E A 30 PSI

1 2 4 5

D

3 6 7

1 – FUNCTION

NPA – Single setpoint, adjustable deadband NPI – Single setpoint, adjustable deadband, process and setpoint indication

2 – ENCLOSURE

N4 – Watertight NEMA 3, 4, 4X, 13 and IP66 N7 – Explosion proof NEMA 3, 4, 4X, 13, 7, 9 and

IP66 – Not available with Model NPI (display)

3 – OUTPUT

D SPDT Relay 10A, 250 Vac 10A, 30 Vdc I SPDT Relay and 10A, 250 Vac Current Output 10A, 30 Vdc and 4-20mA

5 – PRESSURE PORT

Code Description S01 1⁄8 NPT Male S02 1⁄4 NPT Male S03 1⁄8 NPT Female S04 1⁄4 NPT Female

S05 7⁄16-20 SAE-1⁄4 SAE

S06 1⁄2 NPT Male 1⁄4 & NPT Female S07 1⁄4 AMINCO – Female

4 – POWER REQUIREMENT

Code L 110 Vac, 50/60Hz C 24 Vdc V 250 Vac, 50/60Hz

6 – N-SERIES OPTIONS

CODE DESCRIPTION

XEA External setpoint adjustment

Consult factory for other options

7 – NOMINAL RANGE

PERFORMANCE TABLE (psi)

Nominal Setpoint psi psi Range Limits Proof Burst 60 3-60 120 480 100 5-100 200 800 200 10-200 400 1600 300 15-300 600 2400 500 25-500 1000 4000 750 35-750 1500 6000 1000 50-1000 2000 8000 2000 100-2000 4000 16,000 3000 150-3000 4500 20,000 5000 250-5000 7500 22,500 7500 375-7500 9000 25,000 10,000 500-10,000 12,000 30,000 15,000 750-15,000 18,000 45,000 20,000 1000-20,000 24,000 60,000

NOTE: TEMPERATURE SPECIFICATIONS (70°F ref.)

–20°F to 160°F Setpoint shift of up to 2% of range per 50°F change can be expected

NEMA 7 (N7)

SP INCR CW

DB INCR CW

3.62

4.37

INDICATING

LEDS

TERMINAL BLOCKS

GROUND SCREW

SETPOINT

ADJUSTMENT

KNOB

DEADBAND

ADJUSTMENT

KNOB

AC AC NC C NO 6.55

3.67

3.96

1.25

3/4 NPT

FEMALE

NOTE: THIS VIEW SHOWN

WITH COVER REMOVED

1/4 NPT MALE

PRESSURE CONNECTION

(92)

(111)

(101)

(32)

(166)

(93)

NEMA 4 (N4)

3.31

3.26

5.62

INDICATING LEDS

NOTE: THIS VIEW SHOWN

WITH COVER REMOVED

TERMINAL

BLOCK

GROUND

SCREW

DEADBAND

ADJUSTMENT

KNOB

SETPOINT ADJUSTMENT KNOB

SP INCR CW

DB INCR CW

AC

AC

NC

C

NO

1.26

3.01

3/4 NPT

1/4 NPT MALE

PRESSURE CONNECTION

(143)

(84)

(83)

(32)

(76)

Weight

1.8 lb

(.81 kg)

Weight

2.7 lb

(1.2 kg)

DIMENSION DRAWINGS

HomR Text Box Ashcroft P/N: NPI-N4DC-SO6-200 PSI

HomR Text Box I

HomR Text Box D

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box C

HomR Rectangle

HomR Rectangle

HomR Line

HomR Text Box

200 PSI

HomR Rectangle

HomR Rectangle

HomR Text Box

HomR Line

HomR Line

HomR Line

Pressure Indication Switch with Isolation Diaphragm

Ashcroft N-Series Electronic Pressure Switch

Ashcroft P/N: NPI-N4DC-S06-200 PSI

Part Number Key:

NPI FUNCTION: Single Setpoint, Adjustable Dead Band, Process & Setpoint Indication N4 ENCLOSURE: Watertight, NEMA 3, 4, 4X, 13 and IP66

D OUTPUT: SPDT Relay, 10A @ 250 VAC, 10A @ 30 VDC

C POWER REQUIREMENT: 24 VDC

SO6 PRESSURE PORT: ½” NPT Male ¼” & NPT Female 200 PSI NOMINAL RANGE: 200 PSI / 10-200 PSI Setpoint Limits, 400 PSI Proof, 1600 PSI Burst

Pressure Instrumentation Diaphragm Seal (316 SS)

Ashcroft P/N: 50-200 S S 04T XCF XSE

Part Number Key:

50 PROCESS CONNECTION SIZE: 1/2” NPT

200 MODEL: Type 200 Series Welded or Bonded Diaphragm Seal

S DIAPHRAGM MATERIAL: 316L-SS

S HOUSING MATERIAL: 316L-SS

04T INSTRUMENT CONNECTOIN: ½” NPT

Pressure Instrumentation Diaphragm Seal (Hastalloy)

Ashcroft P/N: 50-200 H H 04T XCF XSE

Part Number Key:

50 PROCESS CONNECTION SIZE: 1/2” NPT

200 MODEL: Type 200 Series Welded or Bonded Diaphragm Seal

H DIAPHRAGM MATERIAL: Hastalloy C-276 H HOUSING MATERIAL: Hastalloy C-276

04T INSTRUMENT CONNECTOIN: ½” NPT

NOTE: Above Ashcroft 200 Diaphragm Seal as appropriate to application to be Factory Assembled to Ashcroft N-Series Pressure Switch and delivered as a single device.

IDEAL FOR PRESSURE ALARM,

SHUTDOWN, CONTROL ON –

• Machine tools

• Injection molding machines

• Presses

• Pumps

• Hydraulic systems

• Turbines and compressors

• Pipelines

• Most process applications

• All high-cycle applications

N-Series Electronic Pressure Switches

Ashcroft® N-Series electronic pressure switches have proven reliable in the tough-est industrial applications. The pressure sensor is a standard Ashcroft K-Series thin film transducer. The signal developed in the transducer is processed on a confor-mal coated printed circuit board to pro-duce an output to a high quality electro-mechanical relay, which is rated for 10,000,000 cycles at rated load! The result is a long lasting pressure switch that will outlast mechanical switches in high cycle applications such as metal stamping presses, plastic injection molding machines, and other machine tool and special equipment. N-Series also features narrow, adjust-able deadbands that can be adjusted to less that 0.5% of range, solv-ing many pipeline and elevated tank appli-cations that are out of the reach of mechanical products.

The indicating model is ideally suited for applications where both a pressure indica-tor and a switch output for alarm, shut-down, control or interlock are needed.

Sludge and slurry applications in waste-water and pulp and paper mills often require costly diaphragm seals to isolate instruments from the clogging effects of the process. You can save money by installing N-Series with indication on a single seal.

You can even set the switch set and reset points on a test bench without pressure on the system, using the indicator and status lights. Look for these additional features.

BULLETIN SW15

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2008 07/14

PERFORMANCE SPECIFICATIONS

Ashcroft Model: N-Series Accuracy Class (F.S.): 1.0% Nonlinearity Terminal Point* ±0.7% B.F.S.L. ±0.4% Hysteresis ±0.2% Nonrepeatability ±0.07% Interchangeability ±1.0% *Includes hysteresis Stability: ±0.5% F.S./year non-cumulative Durability: 108 cycles 20/80% F.S. with negligible performance change

Response time: Less than 5m sec

ENVIRONMENTAL CHARACTERISTICS

Temperature Limits:

Storage –65/+250°F Operating –20/+180°F Compensated –20/+160°F Thermal Coefficients (70°F ref.):

Accuracy Zero and Span 1.0% ±0.040% F.S./°F

ELECTRICAL SPECIFICATIONS

Output Signal: Supply Voltage:

4-20mA (2 wire) 36 Vdc unregulated Reverse polarity protected.

Zero Offset: ±1.0%F.S.

MECHANICAL SPECIFICATIONS

Standard Construction Materials:

Wetted Parts:

Diaphragm — 17-4PH SS Pressure Connection —316SS

Vmin = 12V+ [.022A*(R L)] *includes a 10% safety factor

RL = RS + RW

RL = Loop Resistance (ohms) RS = Sense Resistance (ohms) RW = Wire Resistance (ohms)

Load Limitations 4-20mA Output

Loop Resistance (Ω)

0 10 12 20 30 36 40

OPERATING

REGION

HomR

Ashcroft P/N: NPI-N4DC-SO6-200 PSI

BULLETIN SW15

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2008 07/14

N-Series Electronic Pressure Switches

N-SERIES PRESSURE SWITCH MODEL NUMBER:

To specify the exact switch desired select entries from appropriate tables as shown in example below.

N P A N 4 L S 0 1 X E A 30 PSI

1 2 4 5

D

3 6 7

1 – FUNCTION

NPA – Single setpoint, adjustable deadband NPI – Single setpoint, adjustable deadband, process and setpoint indication

2 – ENCLOSURE

N4 – Watertight NEMA 3, 4, 4X, 13 and IP66 N7 – Explosion proof NEMA 3, 4, 4X, 13, 7, 9 and

IP66 – Not available with Model NPI (display)

3 – OUTPUT

D SPDT Relay 10A, 250 Vac 10A, 30 Vdc I SPDT Relay and 10A, 250 Vac Current Output 10A, 30 Vdc and 4-20mA

5 – PRESSURE PORT

Code Description S01 1⁄8 NPT Male S02 1⁄4 NPT Male S03 1⁄8 NPT Female S04 1⁄4 NPT Female

S05 7⁄16-20 SAE-1⁄4 SAE

S06 1⁄2 NPT Male 1⁄4 & NPT Female S07 1⁄4 AMINCO – Female

4 – POWER REQUIREMENT

Code L 110 Vac, 50/60Hz C 24 Vdc V 250 Vac, 50/60Hz

6 – N-SERIES OPTIONS

CODE DESCRIPTION

XEA External setpoint adjustment

Consult factory for other options

7 – NOMINAL RANGE

PERFORMANCE TABLE (psi)

Nominal Setpoint psi psi Range Limits Proof Burst 60 3-60 120 480 100 5-100 200 800 200 10-200 400 1600 300 15-300 600 2400 500 25-500 1000 4000 750 35-750 1500 6000 1000 50-1000 2000 8000 2000 100-2000 4000 16,000 3000 150-3000 4500 20,000 5000 250-5000 7500 22,500 7500 375-7500 9000 25,000 10,000 500-10,000 12,000 30,000 15,000 750-15,000 18,000 45,000 20,000 1000-20,000 24,000 60,000

NOTE: TEMPERATURE SPECIFICATIONS (70°F ref.)

–20°F to 160°F Setpoint shift of up to 2% of range per 50°F change can be expected

NEMA 7 (N7)

SP INCR CW

DB INCR CW

3.62

4.37

INDICATING

LEDS

TERMINAL BLOCKS

GROUND SCREW

SETPOINT

ADJUSTMENT

KNOB

DEADBAND

ADJUSTMENT

KNOB

AC AC NC C NO 6.55

3.67

3.96

1.25

3/4 NPT

FEMALE

NOTE: THIS VIEW SHOWN

WITH COVER REMOVED

1/4 NPT MALE

PRESSURE CONNECTION

(92)

(111)

(101)

(32)

(166)

(93)

NEMA 4 (N4)

3.31

3.26

5.62

INDICATING LEDS

NOTE: THIS VIEW SHOWN

WITH COVER REMOVED

TERMINAL

BLOCK

GROUND

SCREW

DEADBAND

ADJUSTMENT

KNOB

SETPOINT ADJUSTMENT KNOB

SP INCR CW

DB INCR CW

AC

AC

NC

C

NO

1.26

3.01

3/4 NPT

1/4 NPT MALE

PRESSURE CONNECTION

(143)

(84)

(83)

(32)

(76)

Weight

1.8 lb

(.81 kg)

Weight

2.7 lb

(1.2 kg)

DIMENSION DRAWINGS

HomR Text Box Ashcroft P/N: NPI-N4DC-SO6-200 PSI

HomR Text Box I

HomR Text Box D

HomR Rectangle

HomR Rectangle

HomR Rectangle

HomR Text Box C

HomR Rectangle

HomR Rectangle

HomR Line

HomR Text Box

200 PSI

HomR Rectangle

HomR Rectangle

HomR

BULLETIN DS-200

SPECIFICATIONS

Model Number: Type 200, 201, 202, 203, 204, 205, 206, 207, 208

Process Connection Size: See Table A Instrument Connection Size: 1⁄4˝, 1⁄2 NPT

Diaphragm Material: See Table B

Bottom Housing Materials: See Table C

Filling Fluid: See Table E

OPTIONS Code

316 stainless steel YT top housing

Stainless steel clamp SE rings and flanged ring

– includes 300 stainless steel clamping bolts (1500 psi max)

300 series stainless SB steel clamping bolts (max pres is 1500 psi)

Pipe plugs for flushing PU connections – pipe plugs are available in the same materials as bottom housings per Table C

5000 psi pressure rating HP Threaded inlet and metal diaphragm only

Welded instrument to DU diaphragm seal

Dual flushing connections DB (1⁄2 NPT) (Limited to 2˝ thru 3˝ flanged seals

Ring joint (Flanged seal only) RJ

Flat face (Flanged seal only) FF

Clean for gaseous oxygen 6B or strong oxidizing agent applications.

Type 200 Series Welded or Bonded Diaphragm Seal

Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA Tel: 203-378-8281 • Fax: 203-385-0408 email: info@ashcroft.com • www.ashcroft.com

All specifications are subject to change without notice.

All sales subject to standard terms and conditions.

© Ashcroft Inc. 2013 11/2013

HOW TO ORDER:

1. From Table A...select TYPE NUMBER based on process connection, process connection size and diaphragm type/construction. (e.g., Threaded/1˝/capsule–code-10-200)

2. From Table B...select DIAPHRAGM MATERIAL. (e.g., 316L stainless steel–code S)

3. From Table C...select BOTTOM HOUSING MATERIAL. (e.g., 316 stainless steel–code S)

4. From Table D...select INSTRUMENT CONNECTION size. (e.g., 1⁄4 NPT–code 02T)

5. From Table E...select FILLING FLUID, if diaphragm seal will be attached to instrument. (e.g., Glycerin–code CG) Tylpical Code: 10–200SS–02T–CG

When isolation of the process from an instrument is required, Ashcroft offers a comprehensive line of diaphragm seals.

Seal types include threaded, flanged, in-line threaded, in-line flanged, in-line socket weld, in-line butt weld, saddle and sanitary seals. Also available is a complete offering of isolation or iso-rings and isolation or iso-spools.

APPLICATIONS

•…