Addendum 003 - Valves - Other Air Pressure Valves R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015440 Rev: 00

Description of Item: Other Air Pressure Control Valves

Specification Section: 43 21 00

Deviations: See document NYCS000015386

INDEX:

Page 1: Cover Page Information

Page 2: Revision History and Approvals

Page 3: Tab 01 - NYCS000015439,CSS,Other Air Pressure Control Valves,01.287

Pages 4-5: Tab 02 - NYCS000015445,Festo,MS4-LRF,0.25in,5um,WH172287

Pages 6-65: Tab 03 - NYCS000015446,Festo,MS-LFR,Technical Brochure

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015439R00 Doc Title: NYCS000015439,CSS,Other Air Pressure Control Valves,01.287.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015440, Other Air Pressure Control Valves,01.287:

L‐897, Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 43 21 00, Pumping Equipment – Basic Requirements.

Any exceptions and clarifications to the specification section above can be found in submittal NYCS000015386,L‐897,Section 43 21 00,Es and Cs,01.287.

Pall has taken exceptions and clarifications relevant to the other air pressure control valves proposed.

Filter regulator

MS4-LFR-1/4-D6-CRV-AS

Part number: 529146

Data sheet

Feature Value

Size 4

For use in the food industry See supplementary material information

Type code MS4-LFR

Series MS

Actuator lock can be closed with accessories Rotary knob with detent

Mounting position Vertical +/- 5°

Grade of filtration 5 µm

Condensate drain Fully automatic

Design Filter regulator with pressure gauge

Max. condensate volume 19 ml

Controller function Outlet pressure constant With return flow function With secondary exhausting

Bowl guard Plastic bowl guard

Symbol 00991587

Pressure gauge with pressure gauge

Operating pressure 2 bar ... 12 bar

Pressure regulation range 0.3 bar ... 7 bar

Max. pressure hysteresis 0.25 bar

Standard nominal flow rate 1500 l/min

Operating medium Compressed air as per ISO 8573-1:2010 [7:4:-] Inert gas

Corrosion resistance class (CRC) 2 - Moderate corrosion stress

Storage temperature -10 °C ... 60 °C

Air quality class at the output Compressed air as per ISO 8573-1:2010 [6:4:4]

Temperature of medium 5 °C ... 60 °C

Ambient temperature 5 °C ... 60 °C

Product weight 275 g

Type of mounting Front panel mounting With accessories Line installation Optionally:

Pneumatic connection 1 G1/4

Pneumatic connection 2 G¼

Note on materials RoHS-compliant

Material of sub-base Die-cast aluminum

12/15/19 - Subject to change - Festo AG & Co. KG 1/24

LarkinD Text Box

NYCS000015445R00

LarkinD

WH172287

Feature Value

Material of operator panel PA

POM

Seals material NBR

Compressed air filter material PE

Housing material Die-cast aluminum

Diaphragm material NBR

Material of bowl PC

Separating disc material POM

12/15/19 - Subject to change - Festo AG & Co. KG 2/25

Filter regulators MS-LFR, MS series q/w Festo core product range

Covers 80% of your automation tasks

Worldwide: Always in stock

Superb: Festo quality at an attractive price

Easy: Reduces procurement and storing complexity qReady for dispatch from the Festo factory in 24 hours

Held in stock in 13 service centres worldwide

More than 2200 products wReady for dispatch in 5 days maximum from stock

Assembled for you in 4 service centres worldwide

Up to 6 x 1012 variants per product series

Look of the star!

LarkinD

NYCS000015446R00

Subject to change – 2019/052 � Internet: www.festo.com/catalog/...

MS series service unit components Key features

MS series service unit components

Solutions for every application Freely combinable function modules

With its large product range, highly functional components and a wide choice of services, the MS series from

Festo offers a complete concept for compressed air preparation. Suitable for simple standard applications as well as application-specific solutions to the highest quality standards.

Available as individual components, pre-assembled combinations ex-stock, application-specific combinations or complete turnkey solutions. The five sizes in the MS series achieve maximum flow rates with minimum space requirements.

Pressure regulators, on/off and soft-start valves with safety function, filter, pressure and flow sensors, dryers, sensors and lubricators. All these allow a suitable solution to be as sembled for every task. Their modular structure means that the components are freely combinable. A simple connection system saves time when replacing individual modules without dismantling the entire combination.

What's more, many of the components are certified to UL and ATEX.

CAD models and configurator Engineering tools

Convenient aids for planning and se lecting application-specific individual devices and combinations. The product configurator lets you config ure customised solutions quickly and transfer the order data with no hassle.

Selection tool for choosing the right service unit without oversizing, and with the right air quality class:

� www.festo.com/engineering/war tungseinheit

Integrated sensors Safety functions Energy savings

Pressure and flow sensors Soft-start/quick exhaust valves

MS6-SV/MS9-SV

Service units MSE6 Intelligent mix of sizes

� Maximum machine availability through controlled processes

� Reliable compressed air preparation and supply for systems

� Integrable or stand-alone

� Easy to connect with M8/M12 plug

� Fast and reliable exhausting of systems up to Performance Level e, certified to EN ISO 13849-1

� Integrated soft-start function

� Fully automatic monitoring and regulation of compressed air supply

� Automatic shut-off of the compressed air in stand-by mode

� Detection and notification of leakages

� Condition monitoring of relevant process data

� Optimum flow rate with up to 18% smaller size

� Excellent energy efficiency

� Cost-optimised combinations – save up to 30%!

Size differences

Size MS2 MS4 MS6 MS9 MS12

Grid dimension [mm] 25 40 62 90 124

Port sizes M5, QS-6 Gx, G¼, Gy G¼, Gy, G½, G¾ G½, G¾, G1, G1¼, G1½

G1, G1¼, G1½, G2

Standard nominal flow rate qnN1)

[l/min] 350 1800 6500 20000 22000

1) Using pressure regulator MS-LR as an example

2019/05 – Subject to change 3� Internet: www.festo.com/catalog/...

Key features

Note

Information

The next few pages provide a brief overview of the complete product range for the MS series service unit components.

You can find detailed information and all of the technical data in the documentation for the corresponding service unit component.

Accessories such as connection plates or mounting brackets can be ordered either via the configurator or separately.

Structure of a service unit

The order of the individual compon ents within a service unit is relevant for safety and functionality. It is not possible to assemble the service unit components in any order in the flow direction. There are restrictions and rules.

The configurator for service unit MSB is a reliable and convenient way of arranging individual service unit components. This ensures that the applicable rules are complied with. As a result, you get a completely assembled combination with UL or

ATEX certification if you need it.

When arranging a combination of individually configured and ordered service unit components, the points on the right must be adhered to under all circumstances.

� Regulators MS-LFR/LR/LRP/LRE are only permissible in the flow direc tion with the same or decreasing pressure regulation range

� Filters MS-LFR/LF/LFM/LFX are only permissible in the flow direction with an increasing grade of filtration

� Lubricators MS-LOE are not permit ted in the flow direction upstream of a filter MS-LFR/LFM/LF/LFX, water separator MS-LWS or membrane air dryer MS-LDM1

� A micro filter MS-LFM must be installed upstream of an activated carbon filter MS-LFX or membrane air dryer MS-LDM1 in the flow direction

� A flow sensor SFAM cannot be installed directly downstream of a regulator MS-LFR/LR; a branching module MS-FRM must be positioned between them

� A soft-start/quick exhaust valve

MS-SV must be the last service unit component in the flow direction

Total product range for MS series service unit components

Type Description Size Pneumatic connection

Push-in connector

Female thread Connection plate with thread

M G NPT G NPT

Combinations

Service units MSB-FRC Technical data � Internet: msb

Combinations of filter regulator and lubricator

4 – – x, ¼ – – –

6 – – ¼, y, ½ – – –

Service units MSB Technical data � Internet: msb

7 combinations, predefined 4 – – ¼ – – –

6 – – ½ – – –

Combinations freely configurable 4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

Service units MSE6 Technical data � Internet: mse6

Combinations with fieldbus con nection for measuring pressure, flow rate and consumption

6 – – – – ½ –

Subject to change – 2019/054 � Internet: www.festo.com/catalog/...

Key features

Total product range for MS series service unit components

Type Description Size Pneumatic connection

Push-in connector

Female thread Connection plate with thread

M G NPT G NPT

Individual devices

Filter regulators MS-LFR Technical data � Internet: ms-lfr

Filter and pressure regulator in a single device, grade of filtration 5 or 40 μm

2 QS-6 M5 – – – –

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Filters MS-LF Technical data � Internet: ms-lf

Grade of filtration 5 or 40 μm 4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Fine and micro filters MS-LFM Technical data � Internet: ms-lfm

Grade of filtration 0.01 or 1 μm 4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Activated carbon filters MS-LFX Technical data � Internet: ms-lfx

For removing liquid and gaseous oil particles

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Water separators MS-LWS Technical data � Internet: ms-lws

Remove condensed water from compressed air, maintenance-free

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

2019/05 – Subject to change 5� Internet: www.festo.com/catalog/...

Key features

Total product range for MS series service unit components

Type Description Size Pneumatic connection

Push-in connector

Female thread Connection plate with thread

M G NPT G NPT

Individual devices

Pressure regulators MS-LR Technical data � Internet: ms-lr

For setting the required operating pressure, 4 pressure regulation ranges

2 QS-6 M5 – – – –

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Pressure regulators MS-LRB Technical data � Internet: ms-lrb

For creating a regulator manifold with independent pressure regula tion ranges. Pressure output is to the front or rear.

4 – – ¼ – x, ¼, y –

6 – – ½ – ¼, y, ½, ¾ –

Precision pressure regulators MS-LRP Technical data � Internet: ms-lrp

For precise setting of the required operating pressure, 4 pressure regulation ranges, pressure hysteresis 0.02 bar

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

Precision pressure regulators MS-LRPB Technical data � Internet: ms-lrpb

For configuring a regulator manifold with independent pressure regulation ranges.

Pressure output is to the front or rear.

6 – – ½ – ¼, y, ½, ¾ –

Electrical pressure regulators MS-LRE Technical data � Internet: ms-lre

Electrically adjustable pressure regulator, 4 pressure regulation ranges

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

Lubricators MS-LOE Technical data � Internet: ms-loe

Add a precisely adjustable amount of oil to the compressed air. The oil mist component is proportional to the compressed air flow rate.

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Subject to change – 2019/056 � Internet: www.festo.com/catalog/...

Key features

Total product range for MS series service unit components

Type Description Size Pneumatic connection

Push-in connector

Female thread Connection plate with thread

M G NPT G NPT

Individual devices

On/off valves MS-EM Technical data � Internet: ms-em

Manually operated on/off valve for pressurising and exhausting pneumatic installations.

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

On/off valves MS-EE Technical data � Internet: ms-ee

Solenoid actuated on/off valve for pressurising and exhausting pneumatic installations.

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Soft-start valves MS-DL Technical data � Internet: ms-dl

Pneumatically actuated soft-start valve for slowly pressurising and exhausting pneumatic installations.

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

12 – – – – 1, 1¼, 1½, 2 –

Soft-start valves MS-DE Technical data � Internet: ms-de

Solenoid actuated soft-start valve for slowly pressurising and exhausting pneumatic installations.

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

12 – – – – 1, 1¼, 1½, 2 –

Soft-start/quick exhaust valves MS-SV Technical data � Internet: ms-sv

For building up pressure gradually and reducing pressure quickly and safely in pneumatic piping systems.

Up to category 1, PL c.

6 – – ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

Up to category 3, PL d.

Up to category 4, PL e in the case of optional extension.

6 – – ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

Up to category 4, PL e. 6 – – ½ – ¼, y, ½, ¾ –

2019/05 – Subject to change 7� Internet: www.festo.com/catalog/...

Key features

Total product range for MS series service unit components

Type Description Size Pneumatic connection

Push-in connector

Female thread Connection plate with thread

M G NPT G NPT

Individual devices

Membrane air dryers MS-LDM1 Technical data � Internet: ms-ldm

Wear-free membrane dryer with internal air consumption

4 – – x, ¼ – x, ¼, y x, ¼, y

6 – – ¼, y, ½ – ¼, y, ½, ¾ ¼, y, ½, ¾

Branching modules MS-FRM Technical data � Internet: ms-frm

Compressed air distributor with

4 connections

4 – – x, ¼ – x, ¼, y –

6 – – ¼, y, ½ – ¼, y, ½, ¾ –

9 – – ¾, 1 ¾, 1 ½, ¾, 1, 1¼, 1½ ½, ¾, 1, 1¼, 1½

12 – – – – 1, 1¼, 1½, 2 –

Distributor blocks MS-FRM-FRZ Technical data � Internet: ms-frm-frz

Compressed air distributor with

4 connections and half the grid dimension width

4 – – – – – –

6 – – – – – –

Flow sensors SFAM Technical data � Internet: sfam

For absolute flow rate information and accumulated air consumption measurement

6 – – – – ½ ½

9 – – – – 1, 1½ 1, 1½

Subject to change – 2019/058 � Internet: www.festo.com/catalog/...

Filter regulators MS2-LFR, MS series Peripherals overview

Mounting components and accessories

� Page/Internet

1 Pressure gauge

PAGN

2 Mounting bracket

MS2-WR

For wall mounting, knurled nut included in scope of delivery 56

3 Nut

MS2-WRS

For front panel mounting 56

4 Plug screw

MS2-G18S

– Filter cartridge

LFP

-V- New

2019/05 – Subject to change 9� Internet: www.festo.com/catalog/...

Type codes

MS 2 – LFR – M5 – D6 – AR – BAR – C – M – B

Series

MS Standard service unit

Size

2 Grid dimension 25 mm

Service function

LFR Filter regulator

Pneumatic connection

M5 Female thread M5

QS6 Push-in connector for tubing O.D. 6 mm

Pressure regulation range

D6 Pressure regulation range 0.5 … 7 bar

Pressure gauge/adapter

AR Pressure gauge

A8 Adapter for EN pressure gauge x, without pressure gauge

Pressure gauge scale

None

BAR Display unit [bar/psi]

MPA Display unit [MPa]

Grade of filtration

C 5 μm

Condensate drain

M Manual rotary

Version

B Basic

Subject to change – 2019/0510 � Internet: www.festo.com/catalog/...

Technical data

With pressure gauge

Without pressure gauge

-M- Flow rate

140 … 310 l/min

-Q- Temperature range

–5 … +50 °C

-L- Operating pressure

1 … 10 bar

General technical data

With pressure gauge With adapter for EN pressure gauge x, without pressure gauge

Pneumatic connection 1, 2 M5

QS-6

Design Filter regulator with pressure gauge Filter regulator without pressure gauge

Regulating function Output pressure constant, with return flow action, with secondary venting

Type of mounting With accessories

In-line installation

Front panel mounting

Mounting position Vertical ±5°

Grade of filtration [μm] 5

Air quality class at the outlet Compressed air to ISO 85731:2010 [6:4:4]

Condensate drain Manual rotary

Actuator lock Rotary knob with detent

Pressure regulation range [bar] 0.5 … 7

Max. pressure hysteresis [bar] 0.25

Pressure indicator With pressure gauge Gx prepared

Max. condensate volume [ml] 3

Characteristic flow rate values

Pneumatic connection 1, 2 M5 QS-6

Standard nominal flow rate qnN1)

[l/min] 140 310

1) Measured at p1 = 10 bar and p2 = 6 bar, Δp = 1 bar

2019/05 – Subject to change 11� Internet: www.festo.com/catalog/...

Technical data

Operating and environmental conditions

Pneumatic connection 1, 2 M5 QS-6

Operating pressure [bar] 1 … 10 1 … 8

Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]

Inert gases

Ambient temperature [°C] –5 … +50

Temperature of medium [°C] –5 … +50

Storage temperature [°C] –5 … +50

Corrosion resistance class CRC1) 1

1) Corrosion resistance class CRC 1 to Festo standard FN 940070

Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive trunnions).

Weights [g]

Pneumatic connection 1, 2 M5 QS-6

With pressure gauge 47.1 43.9

Without pressure gauge 38.1 34.9

Materials

Housing PA

Rotary knob POM

Bowl PC

Filter PE

Separating disc POM

Valve tappet Wrought aluminium alloy, NBR

Diaphragm NBR

Spring High-alloy steel

Seals NBR

Note on materials RoHS-compliant

Subject to change – 2019/0512 � Internet: www.festo.com/catalog/...

Technical data

Dimensions Download CAD data � www.festo.com

With pressure gauge AR

MS2-LFR-M5-…-AR MS2-LFR-QS6-…-AR

Barbed fitting for plastic tubing

PUN(-H)-8x1.25

1 Pneumatic connection QS-6

� Flow direction

Type B1 B2 B3 B4 B5 B7 D1 D2

D3

D4 D5

L1 L2 L3 L4 L5

MS2-LFR-M5-…-AR 28

16.7 49 25 14 15.5

M5 21 M23x1 13.8 23 74.9 14.4 34.1 32 17.9

MS2-LFR-QS6-…-AR 33.1 QS-6

2019/05 – Subject to change 13� Internet: www.festo.com/catalog/...

Technical data

Dimensions Download CAD data � www.festo.com

With adapter A8 for EN pressure gauge x, without pressure gauge With pressure gauge AR

Type B2 B3 B7 D1 D5

D6

MS2-LFR-M5-…-A8

16.7 33.4 –

M5

– Gx

MS2-LFR-QS6-…-A8 QS-6

MS2-LFR-M5-…-AR

16.7 49 15.5

M5 23 –

MS2-LFR-QS6-…-AR QS-6

Ordering data

Pressure regulation range 0.5 … 7 bar, rotary knob with detent

Size Pneumatic connection 1, 2 Condensate drain Part No. Type

Pressure gauge, display unit [bar/psi]

MS2 M5 Manual rotary 8086641 MS2-LFR-M5-D6-AR-BAR-C-M-B

QS-6 Manual rotary 8086644 MS2-LFR-QS6-D6-AR-BAR-C-M-B

Pressure gauge, display unit [MPa]

MS2 M5 Manual rotary 8086642 MS2-LFR-M5-D6-AR-MPA-C-M-B

QS-6 Manual rotary 8086645 MS2-LFR-QS6-D6-AR-MPA-C-M-B

Adapter for EN pressure gauge x, without pressure gauge

MS2 M5 Manual rotary 8086643 MS2-LFR-M5-D6-A8-C-M-B

QS-6 Manual rotary 8086646 MS2-LFR-QS6-D6-A8-C-M-B

Subject to change – 2019/0514 � Internet: www.festo.com/catalog/...

Filter regulators MS4/MS6-LFR, MS series Peripherals overview

Filter regulator MS4/MS6-LFR aJ aA aB aF

-H- Note

Additional accessories:

– Module connector for combina tion with size MS4/MS6 or size

MS9 � Internet: amv, rmv, armv

– Adapter plate for mounting on profiles � Internet: ipm-80, ipm-40-80, ipm-80-80 aC aD aE

2019/05 – Subject to change 15� Internet: www.festo.com/catalog/...

Peripherals overview

Mounting attachments and accessories

Individual device Combination � Page/

InternetWithout connecting plate

With connecting plate

Without connecting plate

With connecting plate

1 Cover cap

MS4/6-END

ms4-end, ms6-end

2 Connecting plate-SET

MS4/6-AG…

ms4-ag, ms6-ag

Connecting plate-SET

MS4/6-AQ…

ms4-aq, ms6-aq

3 Module connector

MS4/6-MV

ms4-mv, ms6-mv

4 Mounting bracket

MS4/6-WB

ms4-wb, ms6-wb

5 Mounting bracket

MS4-WBM

ms4-wbm

6 Mounting bracket

MS4/6-WR

ms4-wr, ms6-wr

7 Hex nut

MS4/6-WRS

ms4-wrs, ms6-wrs

8 Cover plate

VS

9 Adapter plate for EN pressure gauge x/¼

A8/A4 aJ Pressure gauge

MA

aA Pressure sensor without display

AD7 … AD10

aB Connecting cable

NEBU-M8…-LE3

aC Pressure sensor with display

AD1 … AD4

aD Connecting cable

NEBU-M8…-LE3/NEBU-M12…-LE4

aE Fully automatic condensate drain, electrically actuated E2/E3/E4 aF Padlock

LRVS-D

– Mounting bracket

MS4/6-WP/WPB/WPE/WPM

ms4-wp, ms6-wp

Subject to change – 2019/0516 � Internet: www.festo.com/catalog/...

Type codes

MS 6 – LFR – ½ – D7 – E R M – AS

Series

MS Standard service unit

Size

4 Grid dimension 40 mm

6 Grid dimension 62 mm

Service function

LFR Filter regulator

Pneumatic connection

MS4

x Female thread Gx

¼ Female thread G¼

MS6

¼ Female thread G¼ y Female thread Gy

½ Female thread G½

Pressure regulation range

D6 Pressure regulation range 0.3 … 7 bar

D7 Pressure regulation range 0.5 … 12 bar

Grade of filtration

C 5 μm

E 40 μm

Bowl guard

R Plastic bowl guard

U Integrated as metal bowl

Condensate drain

M Manual rotary

V Fully automatic

Security

AS Rotary knob with detent, lockable via accessories

Additional variants can be ordered using the modular system � 30

� Pneumatic connection

� Pressure regulation range

� Condensate drain

� Pressure gauge alternatives

� Alternative pressure gauge scale

� Secondary venting

� Rotary knob

� Security

� Type of mounting

� EU certification

� UL certification

2019/05 – Subject to change 17� Internet: www.festo.com/catalog/...

Technical data

Manual rotary condensate drain, with pressure gauge

Semi or fully automatic condensate drain, with pressure gauge

With this device, the filter and pressure regulator are combined into a single unit. The sintered filter with water separator removes contamina tion, pipe sinter, rust and condensate from the compressed air.

-M- Flow rate

850 … 7,200 l/min

-Q- Temperature range

–10 … +60 °C

-L- Operating pressure

0.8 … 20 bar

-W- www.festo.com

� Good regulation characteristics with low hysteresis and primary pressure compensation

� Good particle and condensate separation

� Available with or without secondary venting

� High flow rate

� Directly-actuated diaphragm regulator

� Four pressure regulation ranges:

0.3 … 4 bar, 0.3 … 7 bar,

0.5 … 12 bar and 0.5 … 16 bar

� Regulator lock for protecting the values against adjustment

� Two pressure gauge connections for different fitting options

� Return flow option for exhausting from output 2 to output 1 already integrated

� Optional pressure sensor

� Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22

� Choice of filter cartridges:

5 μm or 40 μm

� New filter cartridges � 58

General technical data

Size MS4 MS6

Pneumatic connection 1, 2

Female thread Gx or G¼ G¼, Gy or G½

Connecting plate AG… Gx, G¼ or Gy G¼, Gy, G½ or G¾

Connecting plate AQ… NPTx, NPT¼ or NPTy NPT¼, NPTy, NPT½ or NPT¾

Constructional design Filter regulator with/without pressure display

Regulating function Output pressure constant, with return flow action, with/without secondary venting

Type of mounting Via accessories

In-line installation

Front panel mounting

Mounting position Vertical ±5°

Grade of filtration [μm] 5

Air purity class at the output Compressed air in accordance with ISO 85731:2010 [6:4:4] (Grade of filtration 5 μm)

Compressed air in accordance with ISO 85731:2010 [7:4:4] (Grade of filtration 40 μm)

Bowl guard Plastic bowl guard

Integrated as metal bowl

Condensate drain Manual rotary

Semi-automatic

Fully automatic

– Fully automatic, electrically actuated

Regulator lock Rotary knob with detent, lockable via accessories

Rotary knob with integrated lock

-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1

Subject to change – 2019/0518 � Internet: www.festo.com/catalog/...

Technical data

General technical data

Size MS4 MS6

Pressure regulation range

D5 [bar] 0.3 … 4

D6 [bar] 0.3 … 7

D7 [bar] 0.5 … 12 (0.5 … 10 with pressure sensor variant AD… or with UL certification)

D8 [bar] – 0.5 … 16 (0.5 … 10 with UL certification)

Max. hysteresis [bar] 0.25

Pressure display Via pressure sensor for displaying output pressure via LCD display and electrical output

Via pressure sensor for displaying output pressure via operational status indicator and electrical output

Via pressure gauge for displaying output pressure

Via pressure gauge with red/green scale for displaying output pressure

Gx prepared –

G¼ prepared

Max. condensate volume [cm3] 19 (with plastic bowl guard)

25 (with metal bowl)

Standard nominal flow rate qnN1) [l/min]

Size MS4 MS6

Pneumatic connection Gx G¼ G¼ Gy G½

D5 – Pressure regulation range 0.3 … 4 bar

Grade of filtration 5 μm 9002) 1,8002) 2,0002) 5,5002) 6,9002)

40 μm 1,1002) 1,9002) 2,2002) 6,0002) 7,2002)

D6 – Pressure regulation range 0.3 … 7 bar

Grade of filtration 5 μm 900 1,500 2,700 5,000 5,600

40 μm 1,000 1,700 2,800 5,700 6,200

D7 – Pressure regulation range 0.5 … 12 bar

Grade of filtration 5 μm 850 1,200 2,200 3,500 4,000

40 μm 900 1,500 2,500 4,000 4,500

D8 – Pressure regulation range 0.5 … 16 bar

Grade of filtration 5 μm – – 2,000 3,300 3,800

40 μm – – 2,300 3,500 4,000

1) Measured at p1 = 10 bar and p2 = 6 bar, Δp = 1 bar

2) Measured at p1 = 10 bar and p2 = 3 bar, Δp = 1 bar

-H- 125 l/min must be available for the fully automatic condensate drain to close correctly.

2019/05 – Subject to change 19� Internet: www.festo.com/catalog/...

Technical data

Operating and environmental conditions

Condensate drain Manual rotary Semi-automatic Fully automatic Fully automatic, electrical

M H V E2/E3/E4

Size MS4 MS6 MS4 MS6 MS4 MS6 MS6

Operating pressure [bar] 0.8 … 14

(0.8 … 10)1)

0.8 … 20

(0.8 … 10)1)

1.5 … 12

(1.5 … 10)1)

1.5 … 12

(1.5 … 10)1)

2 … 12

(2 … 10)1)

2 … 12

(2 … 10)1)

0.8 … 16

(0.8 … 10)1)

Operating medium Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Compressed air in accord ance with ISO 85731:2010

[7:4:–]

Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Inert gases

Ambient temperature [°C] –10 … +60 (0 … +50)2) +5 … +60 (+5 … +50)2) +5 … +60 (+5 … +50)2) +1 … +60 (+1 … +50)2)

Temperature of medium [°C] –10 … +60 (0 … +50)2) +5 … +60 (+5 … +50)2) +5 … +60 (+5 … +50)2) +1 … +60 (+1 … +50)2)

Storage temperature [°C] –10 … +60 –10 … +60 –10 … +60 +1 … +60

Corrosion resistance class CRC3) 2

Food-safe4) See supplementary material information –

UL certification4) cULus recognized (OL)

1) Value in brackets applies to MS4/MS6-LFR with UL certification.

2) Value in brackets applies to MS4/MS6-LFR with pressure sensor AD… .

3) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.

4) Additional information www.festo.com/sp � Certificates.

ATEX

EU certification EX4

ATEX category gas II 2G

Ex-ignition protection type gas Ex h IIC T6 Gb X

ATEX category dust II 2D

EX-ignition protection type dust Ex h IIIC T60°C Db X

ATEX ambient temperature +5 °C Ta +60 °C

CE mark (see declaration of conformity)1) To EU Explosion Protection Directive (ATEX)

1) Additional information www.festo.com/sp � Certificates.

Weight [g]

Size MS4 MS6

Rotary knob Without integrated lock E11 With integrated lock E11 Without integrated lock E11 With integrated lock E11

Filter regulator with plastic bowl guard

R

275 400 875 1,145

Filter regulator with metal bowl U 475 600 1,087 1,627

Filter regulator with metal bowl U and fully automatic condensate drain, electrically actuated E2/E3/E4

– – 1,800 2,070

Subject to change – 2019/0520 � Internet: www.festo.com/catalog/...

Technical data

Materials

Sectional view

Filter regulator

1 Housing Die-cast aluminium

2 Rotary knob PA/POM

Rotary knob with integrated lock

E11

Aluminium

3 Plastic bowl guard PC

4 Metal bowl Wrought aluminium alloy, die-cast aluminium

Inspection window PA

5 Filter element PE

6 Spin disc POM

7 Filter holder POM

8 Separating plate POM

9 Stabilising disc POM aJ Diaphragm NBR aA Spring Steel

– Seals NBR

Note on materials RoHS-compliant

Free of copper and PTFE only with cover plate VS

Standard flow rate qn as a function of output pressure p2

Pressure regulation range D6 or D7 Grade of filtration 5 μm Grade of filtration 40 μm

MS4-LFR-x

Input pressure p1 = 10 bar p2 [b ar qn [l/min] qn [l/min] p2 [b ar

D6: 0.3 … 7 bar

D7: 0.5 … 12 bar

MS4-LFR-¼

Input pressure p1 = 10 bar p2 [b ar qn [l/min] qn [l/min] p2 [b ar

D6: 0.3 … 7 bar

D7: 0.5 … 12 bar aJ aA

2019/05 – Subject to change 21� Internet: www.festo.com/catalog/...

Technical data

Standard flow rate qn as a function of output pressure p2

Pressure regulation range D6 or D7 Grade of filtration 5 μm Grade of filtration 40 μm

MS6-LFR-¼

Input pressure p1 = 10 bar qn [l/min] p2 [b ar qn [l/min] p2 [b ar

D6: 0.3 … 7 bar

D7: 0.5 … 12 bar

MS6-LFR-y

Input pressure p1 = 10 bar qn [l/min] p2 [b ar qn [l/min] p2 [b ar

D6: 0.3 … 7 bar

D7: 0.5 … 12 bar

MS6-LFR-½

Input pressure p1 = 10 bar p2 [b ar qn [l/min] qn [l/min] p2 [b ar

D6: 0.3 … 7 bar

D7: 0.5 … 12 bar

Subject to change – 2019/0522 � Internet: www.festo.com/catalog/...

Technical data

Dimensions – Basic version MS4-LFR Download CAD data � www.festo.com

Integrated MS pressure gauge with standard scale, manual rotary condensate drain, rotary knob with detent, lockable via accessories

With plastic bowl guard R With metal bowl U

1 Installation dimensions � Flow direction

Type B1 B2 B3 D1 D2 L1 L2 L3 L4 L5 L6

Plastic bowl guard

Metal bowl

MS4-LFR-x 40 21 57

Gx

37.2 140.6 158 27 60.2 58.5 25 17.7

MS4-LFR-¼ G¼

2019/05 – Subject to change 23� Internet: www.festo.com/catalog/...

Technical data

Dimensions – Basic version MS6-LFR Download CAD data � www.festo.com

Integrated MS pressure gauge with standard scale, manual rotary condensate drain, rotary knob with detent, lockable via accessories

With plastic bowl guard R With metal bowl U

1 Installation dimensions � Flow direction

Type B1 B2 B3 D1 D2 L1 L2 L3 L4 L5 L6

Plastic bowl guard

Metal bowl

MS6-LFR-¼

62 31 77

G¼

51.2 190 218 39 95.1 85 68 15.8MS6-LFR-y Gy

MS6-LFR-½ G½

Subject to change – 2019/0524 � Internet: www.festo.com/catalog/...

Technical data

Dimensions – Pressure gauge alternatives Download CAD data � www.festo.com

Cover plate VS Adapter plate A8/A4 for EN pressure gauge x/¼, without pressure gauge

� Flow direction

Type B2 B3 D1 D4

MS4-LFR-x-…-VS 21 54

Gx

MS4-LFR-¼-…-VS G¼

MS4-LFR-x-…-A8 21 58.5

Gx Gx

MS4-LFR-¼-…-A8 G¼

MS4-LFR-x-…-A4 21 58.5

Gx G¼

MS4-LFR-¼-…-A4 G¼

MS6-LFR-¼-…-VS

31 76

G¼

–MS6-LFR-y-…-VS Gy

MS6-LFR-½-…-VS G½

MS6-LFR-¼-…-A4

31 78.5

G¼

G¼MS6-LFR-y-…-A4 Gy

MS6-LFR-½-…-A4 G½

2019/05 – Subject to change 25� Internet: www.festo.com/catalog/...

Technical data

Dimensions – Pressure gauge alternatives Download CAD data � www.festo.com

Integrated MS pressure gauge with red/green scale RG

� Flow direction

Type B2 B3 D1

MS4-LFR-x-…-RG 21 58.5

Gx

MS4-LFR-¼-…-RG G¼

MS6-LFR-¼-…-RG

31 78.5

G¼

MS6-LFR-y-…-RG Gy

MS6-LFR-½-…-RG G½

Subject to change – 2019/0526 � Internet: www.festo.com/catalog/...

Technical data

Dimensions – Pressure gauge alternatives Download CAD data � www.festo.com

Pressure sensor with LCD display AD1 … AD4 Technical data � Internet: sde1

Variant AD1:

SDE1-D10-G2-MS-L-P1-M8 with

3-pin plug M8x1, 1 switching output PNP

Variant AD2:

SDE1-D10-G2-MS-L-N1-M8 with

3-pin plug M8x1, 1 switching output NPN

Variant AD3:

SDE1-D10-G2-MS-L-PI-M12 with

4-pin plug M12x1, 1 switching output PNP and 4 … 20 mA analogue

Variant AD4:

SDE1-D10-G2-MS-L-NI-M12 with

4-pin plug M12x1, 1 switching output NPN and 4 … 20 mA analogue

� Flow direction

Pressure sensor without LCD display (operational status indicator only) AD7 … AD10 Technical data � Internet: sde5

Variant AD7:

SDE5-D10-O-…-P-M8 with 3-pin plug M8x1, threshold value comparator, 1 switching output

PNP, N/O contact

Variant AD8:

SDE5-D10-C-…-P-M8 with 3-pin plug M8x1, threshold value comparator, 1 switching output

PNP, N/C contact

Variant AD9:

SDE5-D10-O3-…-P-M8 with 3-pin plug M8x1, window comparator, 1 switching output PNP, N/O con tact

Variant AD10:

SDE5-D10-C3-…-P-M8 with 3-pin plug M8x1, window comparator, 1 switching output PNP, N/C contact

� Flow direction

Type B2 B3 D1 D6 L5 L6

MS4-LFR-x-…-AD1/AD2 21 82.6

Gx M8x1 35.1 46.7

MS4-LFR-¼-…-AD1/AD2 G¼

MS4-LFR-x-…-AD3/AD4 21 82.6

Gx M12x1 35.1 55.8

MS4-LFR-¼-…-AD3/AD4 G¼

MS4-LFR-x-…-AD7/AD8/AD9/AD10 21 59.1

Gx M8x1 – –

MS4-LFR-¼-…-AD7/AD8/AD9/AD10 G¼

MS6-LFR-¼-…-AD1/AD2

31 103

G¼

M8x1 35.1 46.7MS6-LFR-y-…-AD1/AD2 Gy

MS6-LFR-½-…-AD1/AD2 G½

MS6-LFR-¼-…-AD3/AD4

31 103

G¼

M12x1 35.1 55.8MS6-LFR-y-…-AD3/AD4 Gy

MS6-LFR-½-…-AD3/AD4 G½

MS6-LFR-¼-…-AD7/AD8/AD9/AD10

31 79

G¼

M8x1 – –MS6-LFR-y-…-AD7/AD8/AD9/AD10 Gy

MS6-LFR-½-…-AD7/AD8/AD9/AD10 G½

2019/05 – Subject to change 27� Internet: www.festo.com/catalog/...

Technical data

Dimensions – Rotary knob Download CAD data � www.festo.com

For installation into control panel or attaching with hex nut MS4/6-WRS (not included in the scope of delivery)

Rotary knob with detent Rotary knob with detent, lockable via accessories AS

Rotary knob with integrated lock

E11

2 Installation dimensions

Long rotary knob with detent LD Long rotary knob with detent, lockable via accessories LD-AS

3 For pressure adjustment: pull out telescopic rotary knob fully

Type B4 B5 D2 D3 L3 L8 L9 L10 L11 ß 1

MS4-LFR-… – –

37.2

M30x1.5

51.1 13 5

6 36MS4-LFR-…-AS 48.6 30 60.2 13 5

MS4-LFR-…-E11 – – 76 14 6 60

MS4-LFR-…-LD – –

51.1

76.8

MS4-LFR-…-LD-AS 48.6 30 60 85.7

MS6-LFR-… – –

51.2

M44x1

86 21 14

7 55MS6-LFR-…-AS 64.4 38.8 95.1 12 5

MS6-LFR-…-E11 – – 110 21 14 60

MS6-LFR-…-LD – –

MS6-LFR-…-LD-AS 64.4 38,8 95.5 148.5

Subject to change – 2019/0528 � Internet: www.festo.com/catalog/...

Technical data

Dimensions – Condensate drain Download CAD data � www.festo.com

Manual rotary M Semi-automatic H Fully automatic V

Barbed connector for plastic tubing PUN(-H)-8x1,25

MS4-…-R/U-M

MS6-…-R-M MS6-…-U-M

Push-in connector for plastic tubing PUN-6/PAN-6

MS4-…-R/U-H

MS6-…-R-H MS6-…-U-H

Barbed connector for plastic tubing PUN(-H)-8x1,25

MS4-…-R/U-V

MS6-…-R-V MS6-…-U-V

Type D6 L6 Type D6 L6 Type D6 L6

Plastic bowl guard R Plastic bowl guard R Plastic bowl guard R

MS4-LFR-…-M

5.6

17.7 MS4-LFR-…-H

6.2

22.1 MS4-LFR-…-V

5.6

20.4

MS6-LFR-…-M 15.8 MS6-LFR-…-H 20.4 MS6-LFR-…-V 18.5

Metal bowl U Metal bowl U Metal bowl U

MS4-LFR-…-M

5.6

17.7 MS4-LFR-…-H

6.2

22.1 MS4-LFR-…-V

5.6

20.4

MS6-LFR-…-M – MS6-LFR-…-H – MS6-LFR-…-V –

Fully automatic, electrically actuated E2/E3/E4 Technical data � Internet: pwea

Condensate drain PWEA:

2 Electrical connection: Screw terminal PG9

3 Connection 360° rotatable for plastic tubing PUN-H-12x2

Type B6 B7 B8 B9 L12

MS6-LFR-…-E2/E3/E4 72 140 108 15 174.5

2019/05 – Subject to change 29� Internet: www.festo.com/catalog/...

Technical data qCore product range

Ordering data

Size Connection Condensate drain Grade of filtration 5 μm Grade of filtration 40 μm

Part No. Type Part No. Type

Pressure regulation range 0.3 … 7 bar, plastic bowl guard, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS4 G¼ Manual rotary q529144 MS4-LFR-¼-D6-CRM-AS q529148 MS4-LFR-¼-D6-ERM-AS

Fully automatic q529146 MS4-LFR-¼-D6-CRV-AS q529150 MS4-LFR-¼-D6-ERV-AS

MS6 G½ Manual rotary q529176 MS6-LFR-½-D6-CRM-AS q529180 MS6-LFR-½-D6-ERM-AS

Fully automatic q529178 MS6-LFR-½-D6-CRV-AS q529182 MS6-LFR-½-D6-ERV-AS

Pressure regulation range 0.5 … 12 bar, plastic bowl guard, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS4 G¼ Manual rotary q529152 MS4-LFR-¼-D7-CRM-AS q529156 MS4-LFR-¼-D7-ERM-AS

Fully automatic q529154 MS4-LFR-¼-D7-CRV-AS q529158 MS4-LFR-¼-D7-ERV-AS

MS6 G½ Manual rotary q529184 MS6-LFR-½-D7-CRM-AS q529188 MS6-LFR-½-D7-ERM-AS

Fully automatic q529186 MS6-LFR-½-D7-CRV-AS q529190 MS6-LFR-½-D7-ERV-AS

Pressure regulation range 0.5 … 12 bar, integrated as metal bowl, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS4 G¼ Manual rotary – – q535724 MS4-LFR-¼-D7-EUM-AS

Fully automatic q535720 MS4-LFR-¼-D7-CUV-AS q535722 MS4-LFR-¼-D7-EUV-AS

MS6 G½ Manual rotary q530338 MS6-LFR-½-D7-CUM-AS q529192 MS6-LFR-½-D7-EUM-AS

Fully automatic q530340 MS6-LFR-½-D7-CUV-AS q529194 MS6-LFR-½-D7-EUV-AS

Ordering data

Size Connection Condensate drain Grade of filtration 5 μm Grade of filtration 40 μm

Part No. Type Part No. Type

Pressure regulation range 0.3 … 7 bar, plastic bowl guard, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS4 Gx Manual rotary 529160 MS4-LFR-x-D6-CRM-AS 529164 MS4-LFR-x-D6-ERM-AS

Fully automatic 529162 MS4-LFR-x-D6-CRV-AS 529166 MS4-LFR-x-D6-ERV-AS

MS6 G¼ Manual rotary 529196 MS6-LFR-¼-D6-CRM-AS 529200 MS6-LFR-¼-D6-ERM-AS

Fully automatic – – 529202 MS6-LFR-¼-D6-ERV-AS

Gy Manual rotary 529216 MS6-LFR-y-D6-CRM-AS 529220 MS6-LFR-y-D6-ERM-AS

Fully automatic 529218 MS6-LFR-y-D6-CRV-AS 529222 MS6-LFR-y-D6-ERV-AS

Pressure regulation range 0.5 … 12 bar, plastic bowl guard, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS4 Gx Manual rotary 529168 MS4-LFR-x-D7-CRM-AS 529172 MS4-LFR-x-D7-ERM-AS

Fully automatic 529170 MS4-LFR-x-D7-CRV-AS 529174 MS4-LFR-x-D7-ERV-AS

MS6 G¼ Manual rotary 529204 MS6-LFR-¼-D7-CRM-AS 529208 MS6-LFR-¼-D7-ERM-AS

Fully automatic 529206 MS6-LFR-¼-D7-CRV-AS 529210 MS6-LFR-¼-D7-ERV-AS

Gy Manual rotary 529224 MS6-LFR-y-D7-CRM-AS 529228 MS6-LFR-y-D7-ERM-AS

Fully automatic 529226 MS6-LFR-y-D7-CRV-AS 529230 MS6-LFR-y-D7-ERV-AS

Pressure regulation range 0.5 … 12 bar, integrated as metal bowl, integrated MS pressure gauge with standard scale, display unit [bar], rotary knob with detent, lockable via accessories

MS6 Gy Manual rotary – – 529232 MS6-LFR-y-D7-EUM-AS

Fully automatic 530348 MS6-LFR-y-D7-CUV-AS 529234 MS6-LFR-y-D7-EUV-AS

Festo core product range qGenerally ready for shipping ex works in 24 hours wGenerally ready for shipping ex works in 5 days

Subject to change – 2019/0530 � Internet: www.festo.com/catalog/...

Ordering data – Modular products

Ordering table

Grid dimension [mm] 40 62 Condi tions

Code Enter code

0M Module No. 526489 526490

Series Standard MS MS

Size 4 6 …

Function Filter regulator -LFR -LFR

Pneumatic connection Female thread Gx – 1 -x

Female thread G¼ Female thread G¼ 1 w-¼

– Female thread Gy 1 -y

– Female thread G½ 1 w-½

Connecting plate Gx – -AGA

Connecting plate G¼ Connecting plate G¼ w-AGB

Connecting plate Gy Connecting plate Gy -AGC

– Connecting plate G½ w-AGD

– Connecting plate G¾ -AGE

Connecting plate NPTx – 1 -AQK

Connecting plate NPT¼ Connecting plate NPT¼ 1 -AQN

Connecting plate NPTy Connecting plate NPTy 1 -AQP

– Connecting plate NPT½ 1 -AQR

– Connecting plate NPT¾ 1 -AQS

Pressure regulation range 0.3 … 4 bar w-D5

0.3 … 7 bar w-D6

0.5 … 12 bar w-D7

– 0.5 … 16 bar 1 -D8

Grade of filtration 40 μm w-E

5 μm w-C

Bowl Plastic bowl with plastic bowl guard w-R

Metal bowl -U

Condensate drain

Manual w-M

Semi-automatic (P1 max. 12 bar) 2 -H

Fully automatic (P1 max. 12 bar) 2 w-V

External, fully automatic, electrical

– 115 V AC, terminals 1 3 -E2

– 230 V AC, terminals 1 3 -E3

– 24 V DC, terminals 1 3 -E4

1 x, ¼, y, ½, AQK, AQN, AQP, AQR, AQS, D8, E2, E3, E4, AD1 … AD4, AD7 … AD10, E11, WPM

Not with EU certification EX4

2 H, V Not with pressure regulation range D8

3 E2, E3, E4 Only with metal bowl U

Transfer order code

MS – LFR – – – – –

Festo core product range qGenerally ready for shipping ex works in 24 hours wGenerally ready for shipping ex works in 5 days

Mandatory data

Options

M

O

2019/05 – Subject to change 31� Internet: www.festo.com/catalog/...

Ordering data – Modular products

Ordering table

Grid dimension [mm] 40 62 Condi tions

Code Enter code

0O Pressure gauge alternatives Cover plate w-VS

Adapter plate for EN pressure gauge x, without pressure gauge

-A8

Adapter plate for EN pressure gauge ¼, without pressure gauge -A4

Integrated pressure gauge, red-green scale 4 -RG

Pressure sensor with LCD display, plug M8, 1 switching output PNP, 3-pin 1 5 -AD1

Pressure sensor with LCD display, plug M8, 1 switching output NPN, 3-pin 1 5 -AD2

Pressure sensor with LCD display, plug M12, 1 switching output PNP, 4-pin, analogue output 4 … 20 mA

1 5 -AD3

Pressure sensor with LCD display, plug M12, 1 switching output NPN, 4-pin, analogue output 4 … 20 mA

1 5 -AD4

Pressure sensor with operational status indicator, plug M8, threshold value comparator, PNP, N/O contact

1 5 -AD7

Pressure sensor with operational status indicator, plug M8, threshold value comparator, PNP, N/C contact

1 5 -AD8

Pressure sensor with operational status indicator, plug M8, window comparator, PNP, N/O contact

1 5 -AD9

Pressure sensor with operational status indicator, plug M8, window comparator, PNP, N/C contact

1 5 -AD10

Alternative pressure gauge scale psi 6 -PSI

MPa 6 -MPA

Secondary venting Without secondary venting -OS

Rotary knob Long rotary knob 7 -LD

0M Security Without

Lockable via accessories w-AS

With integrated lock 1 -E11

0O Type of mounting Mounting bracket with knurled nut for regulator head 8 w-WR

Mounting bracket standard design 9 -WP

Mounting bracket for attaching the service units 1 9 -WPM

Mounting bracket centrally at rear (wall mounting top and bottom), connecting plates not required w-WB

Mounting bracket centrally at rear (wall mounting top), connecting plates not required

-WBM

EU certification II 2GD to EU Explosion Protection Directive (ATEX) -EX4

UL certification cULus, ordinary location for Canada and USA -UL1

Flow direction Flow direction from right to left -Z

4 RG Alternative pressure gauge scale PSI serves only as an auxiliary scale

5 AD1 … AD4, AD7 … AD10

Measuring range max. 10 bar

Not with pressure regulation range D8

6 PSI, MPA Not with pressure gauge alternatives VS, A8, A4, AD1 … AD4, AD7 … AD10

7 LD Not with security E11

8 WR Not with long rotary knob LD

9 WP, WPM Only with connecting plate AGA, AGB, AGC, AGD, AGE, AQK, AQN, AQP, AQR or AQS

Transfer order code

Festo core product range qGenerally ready for shipping ex works in 24 hours wGenerally ready for shipping ex works in 5 days

Mandatory data

Options

M

Subject to change – 2019/0532 � Internet: www.festo.com/catalog/...

Filter regulators MS9-LFR, MS series Peripherals overview

-H- Note

Additional accessories:

– Module connector for combina tions with size MS6, MS9 or MS12

� Internet: rmv, armv

2/3/4/5

2/3/4/5 aC aB aJ aA

2019/05 – Subject to change 33� Internet: www.festo.com/catalog/...

Peripherals overview

Mounting attachments and accessories

Individual unit Combination � Page/

InternetWith female thread

¾/1/N¾/N1

With connecting plate AG…/AQ… Module without connect ing thread, without connecting plate G/NG

Without EU certification EX4

With EU certification EX4

1 Connecting plate-SET

MS9-AG…

ms9-ag

Connecting plate-SET

MS9-AQ…

ms9-aq

2 Module connector

MS9-MV

ms9-mv

3 Mounting bracket

MS9-WP

ms9-wp

4 Mounting bracket

MS9-WPB

ms9-wp

5 Mounting bracket

MS9-WPM

ms9-wp

6 MS pressure gauge

AG

7 Cover plate

VS

8 Pressure sensor without display

AD7 … AD10

9 Connecting cable

NEBU-M8…-LE3

aJ Adapter plate for EN pressure gauge ¼

A4 aA Pressure gauge

MA

aB Padlock

LRVS-D

aC Condensate drain, fully automatic, electrically actuated E2/E3/E4

Subject to change – 2019/0534 � Internet: www.festo.com/catalog/...

Type codes

MS 9 – LFR – G – D6 – E U M – DI – AG – BAR – AS

Series

MS Standard service unit

Size

9 Grid dimension 90 mm

Service function

LFR Filter regulator

Pneumatic connection

G Module without connecting thread, without connecting plate

NG Module without connecting thread, without connecting plate (inch)

Pressure regulation range/operation mode

D6 0.5 … 7 bar, manually operated

D7 0.5 … 12 bar, manually operated

Grade of filtration

C 5 μm

E 40 μm

Bowl guard

U Integrated as metal bowl

Condensate drain

M Manual rotary

V Fully automatic

Regulator type

Piloted

DI Directly actuated

Pressure gauge

AG MS pressure gauge

Pressure gauge scale

BAR bar

PSI psi

Security

AS Rotary knob with detent, can be locked using accessories

Additional variants can be ordered using the modular system � 44

� Pneumatic connection

� Pressure regulation range

� Condensate drain

� Pressure gauge alternatives

� Alternative pressure gauge scale

� Secondary venting

� Security lock

� Type of mounting

� EU certification

� UL certification

2019/05 – Subject to change 35� Internet: www.festo.com/catalog/...

Technical data

Manual rotary condensate drain, with pressure gauge

Semi or fully automatic condensate drain, with pressure gauge

With this component, the filter and pressure regulator are combined into a single unit. The sintered filter with water separator removes contamina tion, pipe sinter, rust and condensate from the compressed air.

-M- Flow rate

10,000 … 23,000 l/min

-Q- Temperature range

–10 … +60 °C

-L- Supply pressure

1 … 20 bar

-W- www.festo.com

� Good regulation characteristics with low hysteresis and primary pressure compensation

� Good particle and condensate separation

� Piloted or directly actuated filter-diaphragm regulator

� High flow rates

� Available with or without secondary venting

� Four pressure regulation ranges:

0.5 … 4 bar, 0.5 … 7 bar,

0.5 … 12 bar and 0.5 … 16 bar

� Pressure gauge connection for different fitting options

� Available with manual, semi-auto matic, fully automatic or fully auto matic, electrically actuated condensate drain

� Actuator lock to protect set values against adjustment

� Optional pressure sensor

� Choice of filter cartridges: 5 μm or

40 μm

� New filter cartridges � 58

� Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22

General technical data

Pneumatic connection 1, 2

Female thread G¾, G1, NPT¾ or NPT1

Connecting plate AG… G½, G¾, G1, G1¼ or G1½

Connecting plate AQ… NPT½, NPT¾, NPT1, NPT1¼ or NPT1½

Module without connecting thread/plate G/NG

Design Piloted filter-diaphragm regulator

Directly actuated filter-diaphragm regulator

Regula tor type

Piloted Output pressure constant, with return flow action, with primary pressure compensation, with secondary venting

Directly actuated Output pressure constant, with return flow action, with/without secondary venting

Type of mounting Via accessories

In-line installation

Mounting position Vertical ±5°

Grade of filtration [μm] 5 (air purity class at the output: compressed air in accordance with ISO 85731:2010 [6:4:4])

40 (air purity class at the output: compressed air in accordance with ISO 85731:2010 [7:4:4])

Bowl guard Integrated as metal bowl

Condensate drain Manual rotary

Semi-automatic

Fully automatic

Fully automatic, electrically actuated

Security Rotary knob with detent, lockable via accessories

Rotary knob with integrated lock

Pressure regulation range/operation mode

D5 [bar] 0.5 … 4, manually operated

D6 [bar] 0.5 … 7, manually operated

D7 [bar] 0.5 … 12, manually operated (0.5 … 10 with pressure sensor variant AD…)

D8 [bar] 0.5 … 16, manually operated (0.5 … 10 with pressure sensor variant AD…)

Subject to change – 2019/0536 � Internet: www.festo.com/catalog/...

Technical data

General technical data

Max. pressure hysteresis [bar] 0.4

Pressure display Via pressure sensor for displaying output pressure via operational status indicator and electrical output

Via pressure gauge for displaying output pressure

Via pressure gauge with red/green scale for displaying output pressure

G¼ prepared

Max. condensate volume [ml] 220

Standard nominal flow rate qnN1)2) [l/min]

Design Piloted filter-diaphragm regulator Directly actuated filter-diaphragm regulator DI

Pneumatic connection G¾/NPT¾ G1/NPT1 G¾/NPT¾ G1/NPT1

D5 – Pressure regulation range 0.5 … 4 bar

Grade of filtration 5 μm 17,0003) 20,0003) 16,0003) 18,0003)

40 μm 18,0003) 23,0003) 16,0003) 20,0003)

D6 – Pressure regulation range 0.5 … 7 bar

Grade of filtration 5 μm 15,000 18,000 12,000 10,000

40 μm 16,000 20,000 12,000 10,000

D7 – Pressure regulation range 0.5 … 12 bar

Grade of filtration 5 μm 15,000 18,000 – –

40 μm 16,000 20,000 – –

D8 – Pressure regulation range 0.5 … 16 bar

Grade of filtration 5 μm 15,000 18,000 – –

40 μm 16,000 20,000 – –

1) All values ±15%

2) Measured at p1 = 10 bar and p2 = 6 bar, Δp = 1 bar

3) Measured at p1 = 10 bar and p2 = 4 bar, Δp = 1 bar

-H- 125 l/min must be available for the fully automatic condensate drain to close correctly.

Operating and environmental conditions

Condensate drain Manual rotary

M

Semi-automatic

H

Fully automatic

V

Fully automatic, electrically actuated

E2/E3/E4

Operating pressure [bar] 1 … 20 1.5 … 12 2 … 12 1 … 16

Operating medium Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Compressed air in accord ance with ISO 85731:2010

[7:4:–]

Compressed air in accord ance with ISO 85731:2010

[–:4:–]

Ambient temperature [°C] –10 … +60 +5 … +60 +5 … +60 +1 … +60

Ambient temperature with pressure sensor AD

[°C] 0 … +50 +5 … +50 +5 … +50 +1 … +50

Temperature of medium [°C] –10 … +60 +5 … +60 +5 … +60 +1 … +60

Temperature of medium with pressure sensor AD

[°C] 0 … +50 +5 … +50 +5 … +50 +1 … +50

Storage temperature [°C] –10 … +60 +5 … +60 +5 … +60 +1 … +60

Corrosion resistance class CRC1) 2

UL certification2) cULus recognized (OL)

1) Corrosion resistance class CRC 2 to Festo standard FN 940070

Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo sphere typical for industrial applications.

2) Additional information www.festo.com/sp � Certificates.

2019/05 – Subject to change 37� Internet: www.festo.com/catalog/...

Technical data

ATEX

EU certification EX4

ATEX category gas II 2G

Ex-ignition protection type gas Ex h IIC T6 Gb X

ATEX category dust II 2D

EX-ignition protection type dust Ex h IIIC T60°C Db X

ATEX ambient temperature +5 °C Ta +60 °C

CE mark (see declaration of conformity)1) To EU Explosion…