Addendum 003 - Equipment - Other Strainers R0.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000015142 Rev: 00

Description of Item: Other Strainers

Specification Section: 43 21 00

Deviations: See document NYCS000015386

Cover Page Information

Revision History and Approvals

Tab 1 - NYCS000015401,CSS,Other Strainers,01.287

INDEX:

Page 1:

Page 2:

Page 3:

Pages 4-15: Tab 2 - NYCS000009079,WH171486 3inch SureFlow Temporary_Strainers

Pages 16-18: Tab 3 - NYCS000009085,WH030163 Spears Y Strainer

Pages 19-21: Tab 4 - NYCS000009462,WH059004 Spears Y Strainer

Pages 22-24: Tab 5 - NYCS000009463,WH024410 Soears T Strauber

Pages 25-27: Tab 6 – NYCS000015181,Spears Y-Strainer,1in,CPVC,30,F,E,WH172236

Pages 28-30: Tab 7 – NYCS000015183,Spears Y-Strainer,4in,PVC,30,F,E,WH172238

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Doc Number: NYCS000015401R00 Doc Title: NYCS000015401,CSS,Other Strainers,01.287.docx

Components Specification Sections

The following specification sections are relevant to the approval of submittal NYCS000015142, Other Strainers,01.287:

L‐897, Attachment No. 2 ‐ HNF‐SPEC‐63538, Section 43 21 00, Pumping Equipment – Basic Requirements.

Any exceptions and clarifications to the specification section above can be found in submittal NYCS000015386,L‐897,Section 43 21 00,Es and Cs,01.287.

Pall has taken exceptions and clarifications relevant to the other strainers proposed.

larkind Text Box

WH171486

0300-CS150SS-L-125 (316SS 100 MESH)

larkind

Document: NYCS000009079R00

Line larkind Line larkind

SS = SPECIAL in 316 stainless steel

Rectangle larkind Rectangle larkind Line larkind Line

Rectangle

Line

Rectangle larkind Line

Y-STRAINERS

Sample Engineering Specification All sediment strainers shall be Y-type constructed from PVC Type I, ASTM D 1784 Cell Classification 12454 or CPVC Type IV, or ASTM D1784 Cell Classification 23447. All O-rings shall be EPDM or genuine Viton®. All Y-strainers shall have replaceable PVC, CPVC or Type 316 stainless steel screens and O-ring sealed drain plugs with magnetic drain plug option. All threaded Y-Strainers shall have Stainless Steel Reinforced (SR) threads. All Y-Strainers, sizes 1/2"- 2" shall be pressure rated to 150 psi, sizes 3"- 4" to 90 psi for water at 73° F, as manufactured by Spears Manufacturing Company.

Features Spears Y-type sediment strainers are the perfect choice for in-line removal of suspended solids, sediment, dirt and debris. Convenient removable strainer basket allows quick cleaning with an assortment of screen mesh sizes to meet a variety of application needs.

Spears Y-Strainers are produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for higher temperatures. Available with socket, Stainless Steel Reinforced (SR) threads, or flanged end connectors in IPS sizes 1/2" - 4".

• Provides In-line Protection of Process Equipment

• PVC, CPVC or PVC Clear Construction

• EPDM or genuine Viton® O-ring Seals

• Removable Strainer Basket with O-ring Sealed Drain Plug Allows Quick-Flushing or Bleed-Off Valve Connection

• Multiple Strainer Screen Options in PVC, CPVC, and Type 316 Stainless Steel (see Mesh Code table)

• Optional Magnetic Drain Plug for Ferrous Metal Pickup

• Suitable for Horizontal or Vertical Installation

• Sizes 1/2"- 2" Pressure Rated to 150 psi @ 73°F Sizes 3"- 4" to 90 psi @ 73°F

• Assemble with Silicon-Free, Water Soluble Lubricants Quick-View Y-Strainer Selection Chart

Quick-Change Strainer Screen

Assembly Optional Mesh

Screens Available

Optional Magnetic Plug

Enter Mesh Code in part number blank as specified in table.

(Contact Spears for additional strainer sizes).

1: For CPVC body & strainer screen unit, replace the letter “P” before the dash separator with the letter “C” and add the letter “C” to the part number (e.g., YS22C8-020C)

2: For stainless steel strainer screens, replace the letter “P” (or “C”) before the dash separator with the letter “S” (e.g., YS22S8-020; YS22S8-020C)

3: For PVC Clear Y-Strainer, add the letters "CL" to the part number (e.g., YS22P8-005CL) Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components.

Valve O-ring Pressure Size Material Socket SR Threaded Flanged Rating

EPDM YS22P__-005 YS21P__-005SR YS23P__-005

Viton® YS32P__-005 YS31P__-005SR YS33P__-005

EPDM YS22P__-007 YS21P__-007SR YS23P__-007

Viton® YS32P__-007 YS31P__-007SR YS33P__-007

EPDM YS22P__-010 YS21P__-010SR YS23P__-010

Viton® YS32P__-010 YS31P__-010SR YS33P__-010 150 psi EPDM YS22P__-012 YS21P__-012SR YS23P__-012 Non-Shock Viton® YS32P__-012 YS31P__-012SR YS33P__-012 Water

EPDM YS22P__-015 YS21P__-015SR YS23P__-015 @73° F

Viton® YS32P__-015 YS31P__-015SR YS33P__-015

EPDM YS22P__-020 YS21P__-020SR YS23P__-020

Viton® YS32P__-020 YS31P__-020SR YS33P__-020 EPDM YS22P__-030 YS21P__-030SR YS23P__-030 90 psi Viton® YS32P__-030 YS31P__-030SR YS33P__-030 Non-Shock EPDM YS22P__-040 YS21P__-040SR YS23P__-040 Water Viton® YS32P__-040 YS31P__-040SR YS33P__-040 @73° F

1-1/4

1-1/2

PVC Material1,2,3

1/2

3/4

U.S.

Standard

Mesh Sieve No.

Sieve Opening Size (in.)

Part Number

Mesh Code

8 0.094 8 12 0.062 12 20 0.033 20 30 0.024 30

Additional Stainless Steel screens available to 320 mesh, custom ordered.

Mesh Codes for

PVC, CPVC & SS

larkind Text Box

WH030163

YS32P30-010CL

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind

Document: NYCS000009085R00

Nominal Size PVC CPVC 1/2 4-7/8 3-1/16 2-1/2 1-5/8 3-5/8 5-1/16 .31 .33 3/4 5-15-16 3-11/16 3 2 4-3/8 5-13/16 .50 .53 1 7-1/16 4-7/16 3-5/8 2-1/4 5-3/16 7 .85 .90

1-1/4 8-3/8 5-5/16 4-1/4 2-13/16 6 7-15/16 1.21 1.28 1-1/2 9-3/8 6 4-7/8 3-3/16 6-15/16 8-13/16 1.66 1.76

2 12 7-5/8 6-3/16 3-1/2 8-1/8 10-1/8 2.96 3.10 3 15-5/16 9-11/16 7-5/8 5-1/8 11 14-1/4 5.34 5.64 4 19-13/16 12-1/2 9-7/8 6-9/16 14 14-3/8 9.97 10.45

A1

Threaded Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) SR Threaded Y-Strainer Dimensions & Weights

Nominal Size PVC CPVC 1/2 5-13/16 4-3/16 2-1/2 1-5/8 5-11/16 3-1/2 .82 .85 3/4 7-1/8 5 3-1/8 2 6-7/16 3-7/8 1.23 1.28 1 8-3/16 5-3/4 3-5/8 2-1/4 7-1/4 4-1/4 1.70 1.81

1-1/4 9-7/16 6-9/16 4-9/32 2-13/16 8-1/8 4-5/8 2.40 2.52 1-1/2 10-7/16 7-3/8 4-7/8 3-3/16 9-3/16 5 3.07 3.25

2 13-1/4 9-1/8 6-3/16 3-1/2 10-3/8 6 5.20 5.42 31 16-21/32 11-3/8 7-5/8 5-1/8 12-1/32 7-1/2 9.44 10.07 41 21-19/32 14-5/16 9-7/8 6-9/16 14-9/16 9-1/16 14.87 16.15

A1 Flanged

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16)

Flanged Y-Strainer Dimensions & Weights

A1

A D

B

E

C

1: 3" & 4" flanged Y-strainer uses split flange ring

Nominal Size PVC CPVC 1/2 5 3-1/16 2-9/16 1-5/8 1-9/16 3-3/8 .31 .33 3/4 5-3/4 3-11/16 3 2 2 4 .50 .53 1 6-7/8 4-7/16 3-5/8 2-1/4 2-1/2 4-3/4 .85 .90

1-1/4 8-5/32 5-5/16 4-1/4 2-13/16 3-1/16 5-9/16 1.21 1.28 1-1/2 9-1/8 6 4-7/8 3-3/16 3-9/16 6-5/16 1.66 1.76

2 11-3/4 7-5/8 6-3/16 3-1/2 4-1/2 7-1/2 2.96 3.10 3 15 9-11/16 7-5/8 5-1/8 6-9/16 10-5/16 5.34 5.64 4 19-11/16 12-1/2 9-7/8 6-9/16 8-5/8 13-1/8 9.97 10.45

A1 Socket

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) Socket Y-Strainer Dimensions & Weights

A1

A D

B

E

C

Socket SR Threaded Flanged

A1A D

B

C

E

(38)

(43)

(49)

(54)

(60)

(66)

(71)

(77)

(82)

(88)

(93)

(99)

PVC 150

(1.03)

(.93)

(.76)

(.52)

(.34)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

CPVC 150

(1.03)

(.97)

(.90)

(.83)

(.76)

(.70)

(.62)

(.55)

(.48)

(.41)

(.34)

-0- (-0-)

System Operating

Strainer Pressure Rating psi

(Mpa)

Temperature Pressure Rating

8 12 20 30 1/2 5.5 5.4 5.3 5.2 3/4 8.2 7.8 7.5 7.2 1 14.3 13.9 13.6 13.3

1-1/4 33.6 32.9 29.4 25.4 1-1/2 43.8 41.6 33.0 32.1

2 50.6 50.0 49.6 48.8 3 75.2 74.6 74.0 73.4 4 169.5 169.0 168.8 168.0

Nominal Size

Plastic Strainer MeshY-Strainer Size Tap Size (NPT) 1/2 1/4 - 18 3/4 1/4 - 18 1 3/8 - 18

1-1/4 1/2 - 14 1-1/2 1 - 11-1/2

2 1 - 11-1/2 3 1 - 11-1/2 4 1 - 11-1/2

Drain Plug Tap Size for Bleed-Off Valve Y-Strainer Cv

Gallons per minute at 1 psi pressure drop.

Plastic Strainers are perforated PVC or CPVC screens.

Standard is mesh.

Y-STRAINERS

larkind Rectangle larkind Rectangle

Sample Engineering Specification All sediment strainers shall be Y-type constructed from PVC Type I, ASTM D 1784 Cell Classification 12454 or CPVC Type IV, or ASTM D1784 Cell Classification 23447. All O-rings shall be EPDM or genuine Viton®. All Y-strainers shall have replaceable PVC, CPVC or Type 316 stainless steel screens and O-ring sealed drain plugs with magnetic drain plug option. All threaded Y-Strainers shall have Stainless Steel Reinforced (SR) threads. All Y-Strainers, sizes 1/2"- 2" shall be pressure rated to 150 psi, sizes 3"- 4" to 90 psi for water at 73° F, as manufactured by Spears Manufacturing Company.

Features Spears Y-type sediment strainers are the perfect choice for in-line removal of suspended solids, sediment, dirt and debris. Convenient removable strainer basket allows quick cleaning with an assortment of screen mesh sizes to meet a variety of application needs.

Spears Y-Strainers are produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for higher temperatures. Available with socket, Stainless Steel Reinforced (SR) threads, or flanged end connectors in IPS sizes 1/2" - 4".

• Provides In-line Protection of Process Equipment

• PVC, CPVC or PVC Clear Construction

• EPDM or genuine Viton® O-ring Seals

• Removable Strainer Basket with O-ring Sealed Drain Plug Allows Quick-Flushing or Bleed-Off Valve Connection

• Multiple Strainer Screen Options in PVC, CPVC, and Type 316 Stainless Steel (see Mesh Code table)

• Optional Magnetic Drain Plug for Ferrous Metal Pickup

• Suitable for Horizontal or Vertical Installation

• Sizes 1/2"- 2" Pressure Rated to 150 psi @ 73°F Sizes 3"- 4" to 90 psi @ 73°F

• Assemble with Silicon-Free, Water Soluble Lubricants Quick-View Y-Strainer Selection Chart

Quick-Change Strainer Screen

Assembly Optional Mesh

Screens Available

Optional Magnetic Plug

Enter Mesh Code in part number blank as specified in table.

(Contact Spears for additional strainer sizes).

1: For CPVC body & strainer screen unit, replace the letter “P” before the dash separator with the letter “C” and add the letter “C” to the part number (e.g., YS22C8-020C)

2: For stainless steel strainer screens, replace the letter “P” (or “C”) before the dash separator with the letter “S” (e.g., YS22S8-020; YS22S8-020C)

3: For PVC Clear Y-Strainer, add the letters "CL" to the part number (e.g., YS22P8-005CL) Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components.

Valve O-ring Pressure Size Material Socket SR Threaded Flanged Rating

EPDM YS22P__-005 YS21P__-005SR YS23P__-005

Viton® YS32P__-005 YS31P__-005SR YS33P__-005

EPDM YS22P__-007 YS21P__-007SR YS23P__-007

Viton® YS32P__-007 YS31P__-007SR YS33P__-007

EPDM YS22P__-010 YS21P__-010SR YS23P__-010

Viton® YS32P__-010 YS31P__-010SR YS33P__-010 150 psi EPDM YS22P__-012 YS21P__-012SR YS23P__-012 Non-Shock Viton® YS32P__-012 YS31P__-012SR YS33P__-012 Water

EPDM YS22P__-015 YS21P__-015SR YS23P__-015 @73° F

Viton® YS32P__-015 YS31P__-015SR YS33P__-015

EPDM YS22P__-020 YS21P__-020SR YS23P__-020

Viton® YS32P__-020 YS31P__-020SR YS33P__-020 EPDM YS22P__-030 YS21P__-030SR YS23P__-030 90 psi Viton® YS32P__-030 YS31P__-030SR YS33P__-030 Non-Shock EPDM YS22P__-040 YS21P__-040SR YS23P__-040 Water Viton® YS32P__-040 YS31P__-040SR YS33P__-040 @73° F

1-1/4

1-1/2

PVC Material1,2,3

1/2

3/4

U.S.

Standard

Mesh Sieve No.

Sieve Opening Size (in.)

Part Number

Mesh Code

8 0.094 8 12 0.062 12 20 0.033 20 30 0.024 30

Additional Stainless Steel screens available to 320 mesh, custom ordered.

Mesh Codes for

PVC, CPVC & SS

larkind Text Box

WH059004

YS32P30-020CL

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Text Box Document: NYCS000009462R00

Nominal Size PVC CPVC 1/2 4-7/8 3-1/16 2-1/2 1-5/8 3-5/8 5-1/16 .31 .33 3/4 5-15-16 3-11/16 3 2 4-3/8 5-13/16 .50 .53 1 7-1/16 4-7/16 3-5/8 2-1/4 5-3/16 7 .85 .90

1-1/4 8-3/8 5-5/16 4-1/4 2-13/16 6 7-15/16 1.21 1.28 1-1/2 9-3/8 6 4-7/8 3-3/16 6-15/16 8-13/16 1.66 1.76

2 12 7-5/8 6-3/16 3-1/2 8-1/8 10-1/8 2.96 3.10 3 15-5/16 9-11/16 7-5/8 5-1/8 11 14-1/4 5.34 5.64 4 19-13/16 12-1/2 9-7/8 6-9/16 14 14-3/8 9.97 10.45

A1

Threaded Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) SR Threaded Y-Strainer Dimensions & Weights

Nominal Size PVC CPVC 1/2 5-13/16 4-3/16 2-1/2 1-5/8 5-11/16 3-1/2 .82 .85 3/4 7-1/8 5 3-1/8 2 6-7/16 3-7/8 1.23 1.28 1 8-3/16 5-3/4 3-5/8 2-1/4 7-1/4 4-1/4 1.70 1.81

1-1/4 9-7/16 6-9/16 4-9/32 2-13/16 8-1/8 4-5/8 2.40 2.52 1-1/2 10-7/16 7-3/8 4-7/8 3-3/16 9-3/16 5 3.07 3.25

2 13-1/4 9-1/8 6-3/16 3-1/2 10-3/8 6 5.20 5.42 31 16-21/32 11-3/8 7-5/8 5-1/8 12-1/32 7-1/2 9.44 10.07 41 21-19/32 14-5/16 9-7/8 6-9/16 14-9/16 9-1/16 14.87 16.15

A1 Flanged

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16)

Flanged Y-Strainer Dimensions & Weights

A1

A D

B

E

C

1: 3" & 4" flanged Y-strainer uses split flange ring

Nominal Size PVC CPVC 1/2 5 3-1/16 2-9/16 1-5/8 1-9/16 3-3/8 .31 .33 3/4 5-3/4 3-11/16 3 2 2 4 .50 .53 1 6-7/8 4-7/16 3-5/8 2-1/4 2-1/2 4-3/4 .85 .90

1-1/4 8-5/32 5-5/16 4-1/4 2-13/16 3-1/16 5-9/16 1.21 1.28 1-1/2 9-1/8 6 4-7/8 3-3/16 3-9/16 6-5/16 1.66 1.76

2 11-3/4 7-5/8 6-3/16 3-1/2 4-1/2 7-1/2 2.96 3.10 3 15 9-11/16 7-5/8 5-1/8 6-9/16 10-5/16 5.34 5.64 4 19-11/16 12-1/2 9-7/8 6-9/16 8-5/8 13-1/8 9.97 10.45

A1 Socket

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) Socket Y-Strainer Dimensions & Weights

A1

A D

B

E

C

Socket SR Threaded Flanged

A1A D

B

C

E larkind Rectangle

(43)

(49)

(54)

(60)

(66)

(71)

(77)

(82)

(88)

(93)

(99)

PVC 150

(1.03)

(.93)

(.76)

(.52)

(.34)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

CPVC 150

(1.03)

(.97)

(.90)

(.83)

(.76)

(.70)

(.62)

(.55)

(.48)

(.41)

(.34)

-0- (-0-)

System Operating

Strainer Pressure Rating psi

(Mpa)

Temperature Pressure Rating

8 12 20 30 1/2 5.5 5.4 5.3 5.2 3/4 8.2 7.8 7.5 7.2 1 14.3 13.9 13.6 13.3

1-1/4 33.6 32.9 29.4 25.4 1-1/2 43.8 41.6 33.0 32.1

2 50.6 50.0 49.6 48.8 3 75.2 74.6 74.0 73.4 4 169.5 169.0 168.8 168.0

Nominal Size

Plastic Strainer MeshY-Strainer Size Tap Size (NPT) 1/2 1/4 - 18 3/4 1/4 - 18 1 3/8 - 18

1-1/4 1/2 - 14 1-1/2 1 - 11-1/2

2 1 - 11-1/2 3 1 - 11-1/2 4 1 - 11-1/2

Drain Plug Tap Size for Bleed-Off Valve Y-Strainer Cv

Gallons per minute at 1 psi pressure drop.

Plastic Strainers are perforated PVC or CPVC screens.

Standard is mesh.

Y-STRAINERS

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle

Sample Engineering Specification All sediment strainers shall be Y-type constructed from PVC Type I, ASTM D 1784 Cell Classification 12454 or CPVC Type IV, or ASTM D1784 Cell Classification 23447. All O-rings shall be EPDM or genuine Viton®. All Y-strainers shall have replaceable PVC, CPVC or Type 316 stainless steel screens and O-ring sealed drain plugs with magnetic drain plug option. All threaded Y-Strainers shall have Stainless Steel Reinforced (SR) threads. All Y-Strainers, sizes 1/2"- 2" shall be pressure rated to 150 psi, sizes 3"- 4" to 90 psi for water at 73° F, as manufactured by Spears Manufacturing Company.

Features Spears Y-type sediment strainers are the perfect choice for in-line removal of suspended solids, sediment, dirt and debris. Convenient removable strainer basket allows quick cleaning with an assortment of screen mesh sizes to meet a variety of application needs.

Spears Y-Strainers are produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for higher temperatures. Available with socket, Stainless Steel Reinforced (SR) threads, or flanged end connectors in IPS sizes 1/2" - 4".

• Provides In-line Protection of Process Equipment

• PVC, CPVC or PVC Clear Construction

• EPDM or genuine Viton® O-ring Seals

• Removable Strainer Basket with O-ring Sealed Drain Plug Allows Quick-Flushing or Bleed-Off Valve Connection

• Multiple Strainer Screen Options in PVC, CPVC, and Type 316 Stainless Steel (see Mesh Code table)

• Optional Magnetic Drain Plug for Ferrous Metal Pickup

• Suitable for Horizontal or Vertical Installation

• Sizes 1/2"- 2" Pressure Rated to 150 psi @ 73°F Sizes 3"- 4" to 90 psi @ 73°F

• Assemble with Silicon-Free, Water Soluble Lubricants Quick-View Y-Strainer Selection Chart

Quick-Change Strainer Screen

Assembly Optional Mesh

Screens Available

Optional Magnetic Plug

Enter Mesh Code in part number blank as specified in table.

(Contact Spears for additional strainer sizes).

1: For CPVC body & strainer screen unit, replace the letter “P” before the dash separator with the letter “C” and add the letter “C” to the part number (e.g., YS22C8-020C)

2: For stainless steel strainer screens, replace the letter “P” (or “C”) before the dash separator with the letter “S” (e.g., YS22S8-020; YS22S8-020C)

3: For PVC Clear Y-Strainer, add the letters "CL" to the part number (e.g., YS22P8-005CL) Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components.

Valve O-ring Pressure Size Material Socket SR Threaded Flanged Rating

EPDM YS22P__-005 YS21P__-005SR YS23P__-005

Viton® YS32P__-005 YS31P__-005SR YS33P__-005

EPDM YS22P__-007 YS21P__-007SR YS23P__-007

Viton® YS32P__-007 YS31P__-007SR YS33P__-007

EPDM YS22P__-010 YS21P__-010SR YS23P__-010

Viton® YS32P__-010 YS31P__-010SR YS33P__-010 150 psi EPDM YS22P__-012 YS21P__-012SR YS23P__-012 Non-Shock Viton® YS32P__-012 YS31P__-012SR YS33P__-012 Water

EPDM YS22P__-015 YS21P__-015SR YS23P__-015 @73° F

Viton® YS32P__-015 YS31P__-015SR YS33P__-015

EPDM YS22P__-020 YS21P__-020SR YS23P__-020

Viton® YS32P__-020 YS31P__-020SR YS33P__-020 EPDM YS22P__-030 YS21P__-030SR YS23P__-030 90 psi Viton® YS32P__-030 YS31P__-030SR YS33P__-030 Non-Shock EPDM YS22P__-040 YS21P__-040SR YS23P__-040 Water Viton® YS32P__-040 YS31P__-040SR YS33P__-040 @73° F

1-1/4

1-1/2

PVC Material1,2,3

1/2

3/4

U.S.

Standard

Mesh Sieve No.

Sieve Opening Size (in.)

Part Number

Mesh Code

8 0.094 8 12 0.062 12 20 0.033 20 30 0.024 30

Additional Stainless Steel screens available to 320 mesh, custom ordered.

Mesh Codes for

PVC, CPVC & SS

larkind Text Box

WH024410

YS22P30-007CL

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Text Box Document: NYCS000009463R00 larkind Rectangle

Nominal Size PVC CPVC 1/2 4-7/8 3-1/16 2-1/2 1-5/8 3-5/8 5-1/16 .31 .33 3/4 5-15-16 3-11/16 3 2 4-3/8 5-13/16 .50 .53 1 7-1/16 4-7/16 3-5/8 2-1/4 5-3/16 7 .85 .90

1-1/4 8-3/8 5-5/16 4-1/4 2-13/16 6 7-15/16 1.21 1.28 1-1/2 9-3/8 6 4-7/8 3-3/16 6-15/16 8-13/16 1.66 1.76

2 12 7-5/8 6-3/16 3-1/2 8-1/8 10-1/8 2.96 3.10 3 15-5/16 9-11/16 7-5/8 5-1/8 11 14-1/4 5.34 5.64 4 19-13/16 12-1/2 9-7/8 6-9/16 14 14-3/8 9.97 10.45

A1

Threaded Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) SR Threaded Y-Strainer Dimensions & Weights

Nominal Size PVC CPVC 1/2 5-13/16 4-3/16 2-1/2 1-5/8 5-11/16 3-1/2 .82 .85 3/4 7-1/8 5 3-1/8 2 6-7/16 3-7/8 1.23 1.28 1 8-3/16 5-3/4 3-5/8 2-1/4 7-1/4 4-1/4 1.70 1.81

1-1/4 9-7/16 6-9/16 4-9/32 2-13/16 8-1/8 4-5/8 2.40 2.52 1-1/2 10-7/16 7-3/8 4-7/8 3-3/16 9-3/16 5 3.07 3.25

2 13-1/4 9-1/8 6-3/16 3-1/2 10-3/8 6 5.20 5.42 31 16-21/32 11-3/8 7-5/8 5-1/8 12-1/32 7-1/2 9.44 10.07 41 21-19/32 14-5/16 9-7/8 6-9/16 14-9/16 9-1/16 14.87 16.15

A1 Flanged

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16)

Flanged Y-Strainer Dimensions & Weights

A1

A D

B

E

C

1: 3" & 4" flanged Y-strainer uses split flange ring

Nominal Size PVC CPVC 1/2 5 3-1/16 2-9/16 1-5/8 1-9/16 3-3/8 .31 .33 3/4 5-3/4 3-11/16 3 2 2 4 .50 .53 1 6-7/8 4-7/16 3-5/8 2-1/4 2-1/2 4-3/4 .85 .90

1-1/4 8-5/32 5-5/16 4-1/4 2-13/16 3-1/16 5-9/16 1.21 1.28 1-1/2 9-1/8 6 4-7/8 3-3/16 3-9/16 6-5/16 1.66 1.76

2 11-3/4 7-5/8 6-3/16 3-1/2 4-1/2 7-1/2 2.96 3.10 3 15 9-11/16 7-5/8 5-1/8 6-9/16 10-5/16 5.34 5.64 4 19-11/16 12-1/2 9-7/8 6-9/16 8-5/8 13-1/8 9.97 10.45

A1 Socket

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) Socket Y-Strainer Dimensions & Weights

A1

A D

B

E

C

Socket SR Threaded Flanged

A1A D

B

C

E larkind Rectangle

(43)

(49)

(54)

(60)

(66)

(71)

(77)

(82)

(88)

(93)

(99)

PVC 150

(1.03)

(.93)

(.76)

(.52)

(.34)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

CPVC 150

(1.03)

(.97)

(.90)

(.83)

(.76)

(.70)

(.62)

(.55)

(.48)

(.41)

(.34)

-0- (-0-)

System Operating

Strainer Pressure Rating psi

(Mpa)

Temperature Pressure Rating

8 12 20 30 1/2 5.5 5.4 5.3 5.2 3/4 8.2 7.8 7.5 7.2 1 14.3 13.9 13.6 13.3

1-1/4 33.6 32.9 29.4 25.4 1-1/2 43.8 41.6 33.0 32.1

2 50.6 50.0 49.6 48.8 3 75.2 74.6 74.0 73.4 4 169.5 169.0 168.8 168.0

Nominal Size

Plastic Strainer MeshY-Strainer Size Tap Size (NPT) 1/2 1/4 - 18 3/4 1/4 - 18 1 3/8 - 18

1-1/4 1/2 - 14 1-1/2 1 - 11-1/2

2 1 - 11-1/2 3 1 - 11-1/2 4 1 - 11-1/2

Drain Plug Tap Size for Bleed-Off Valve Y-Strainer Cv

Gallons per minute at 1 psi pressure drop.

Plastic Strainers are perforated PVC or CPVC screens.

Standard is mesh.

Y-STRAINERS

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle

Sample Engineering Specification All sediment strainers shall be Y-type constructed from PVC Type I, ASTM D 1784 Cell Classification 12454 or CPVC Type IV, or ASTM D1784 Cell Classification 23447. All O-rings shall be EPDM or genuine Viton®. All Y-strainers shall have replaceable PVC, CPVC or Type 316 stainless steel screens and O-ring sealed drain plugs with magnetic drain plug option. All threaded Y-Strainers shall have Stainless Steel Reinforced (SR) threads. All Y-Strainers, sizes 1/2"- 2" shall be pressure rated to 150 psi, sizes 3"- 4" to 90 psi for water at 73° F, as manufactured by Spears Manufacturing Company.

Features Spears Y-type sediment strainers are the perfect choice for in-line removal of suspended solids, sediment, dirt and debris. Convenient removable strainer basket allows quick cleaning with an assortment of screen mesh sizes to meet a variety of application needs.

Spears Y-Strainers are produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for higher temperatures. Available with socket, Stainless Steel Reinforced (SR) threads, or flanged end connectors in IPS sizes 1/2" - 4".

• Provides In-line Protection of Process Equipment

• PVC, CPVC or PVC Clear Construction

• EPDM or genuine Viton® O-ring Seals

• Removable Strainer Basket with O-ring Sealed Drain Plug Allows Quick-Flushing or Bleed-Off Valve Connection

• Multiple Strainer Screen Options in PVC, CPVC, and Type 316 Stainless Steel (see Mesh Code table)

• Optional Magnetic Drain Plug for Ferrous Metal Pickup

• Suitable for Horizontal or Vertical Installation

• Sizes 1/2"- 2" Pressure Rated to 150 psi @ 73°F Sizes 3"- 4" to 90 psi @ 73°F

• Assemble with Silicon-Free, Water Soluble Lubricants Quick-View Y-Strainer Selection Chart

Quick-Change Strainer Screen

Assembly Optional Mesh

Screens Available

Optional Magnetic Plug

Enter Mesh Code in part number blank as specified in table.

(Contact Spears for additional strainer sizes).

1: For CPVC body & strainer screen unit, replace the letter “P” before the dash separator with the letter “C” and add the letter “C” to the part number (e.g., YS22C8-020C)

2: For stainless steel strainer screens, replace the letter “P” (or “C”) before the dash separator with the letter “S” (e.g., YS22S8-020; YS22S8-020C)

3: For PVC Clear Y-Strainer, add the letters "CL" to the part number (e.g., YS22P8-005CL) Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components.

Valve O-ring Pressure Size Material Socket SR Threaded Flanged Rating

EPDM YS22P__-005 YS21P__-005SR YS23P__-005

Viton® YS32P__-005 YS31P__-005SR YS33P__-005

EPDM YS22P__-007 YS21P__-007SR YS23P__-007

Viton® YS32P__-007 YS31P__-007SR YS33P__-007

EPDM YS22P__-010 YS21P__-010SR YS23P__-010

Viton® YS32P__-010 YS31P__-010SR YS33P__-010 150 psi EPDM YS22P__-012 YS21P__-012SR YS23P__-012 Non-Shock Viton® YS32P__-012 YS31P__-012SR YS33P__-012 Water

EPDM YS22P__-015 YS21P__-015SR YS23P__-015 @73° F

Viton® YS32P__-015 YS31P__-015SR YS33P__-015

EPDM YS22P__-020 YS21P__-020SR YS23P__-020

Viton® YS32P__-020 YS31P__-020SR YS33P__-020 EPDM YS22P__-030 YS21P__-030SR YS23P__-030 90 psi Viton® YS32P__-030 YS31P__-030SR YS33P__-030 Non-Shock EPDM YS22P__-040 YS21P__-040SR YS23P__-040 Water Viton® YS32P__-040 YS31P__-040SR YS33P__-040 @73° F

1-1/4

1-1/2

PVC Material1,2,3

1/2

3/4

U.S.

Standard

Mesh Sieve No.

Sieve Opening Size (in.)

Part Number

Mesh Code

8 0.094 8 12 0.062 12 20 0.033 20 30 0.024 30

Additional Stainless Steel screens available to 320 mesh, custom ordered.

Mesh Codes for

PVC, CPVC & SS

larkind Text Box

WH172236

YS23C30-010

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Text Box Document: NYCS000015181R00

Nominal Size PVC CPVC 1/2 4-7/8 3-1/16 2-1/2 1-5/8 3-5/8 5-1/16 .31 .33 3/4 5-15-16 3-11/16 3 2 4-3/8 5-13/16 .50 .53 1 7-1/16 4-7/16 3-5/8 2-1/4 5-3/16 7 .85 .90

1-1/4 8-3/8 5-5/16 4-1/4 2-13/16 6 7-15/16 1.21 1.28 1-1/2 9-3/8 6 4-7/8 3-3/16 6-15/16 8-13/16 1.66 1.76

2 12 7-5/8 6-3/16 3-1/2 8-1/8 10-1/8 2.96 3.10 3 15-5/16 9-11/16 7-5/8 5-1/8 11 14-1/4 5.34 5.64 4 19-13/16 12-1/2 9-7/8 6-9/16 14 14-3/8 9.97 10.45

A1

Threaded Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) SR Threaded Y-Strainer Dimensions & Weights

Nominal Size PVC CPVC 1/2 5-13/16 4-3/16 2-1/2 1-5/8 5-11/16 3-1/2 .82 .85 3/4 7-1/8 5 3-1/8 2 6-7/16 3-7/8 1.23 1.28 1 8-3/16 5-3/4 3-5/8 2-1/4 7-1/4 4-1/4 1.70 1.81

1-1/4 9-7/16 6-9/16 4-9/32 2-13/16 8-1/8 4-5/8 2.40 2.52 1-1/2 10-7/16 7-3/8 4-7/8 3-3/16 9-3/16 5 3.07 3.25

2 13-1/4 9-1/8 6-3/16 3-1/2 10-3/8 6 5.20 5.42 31 16-21/32 11-3/8 7-5/8 5-1/8 12-1/32 7-1/2 9.44 10.07 41 21-19/32 14-5/16 9-7/8 6-9/16 14-9/16 9-1/16 14.87 16.15

A1 Flanged

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16)

Flanged Y-Strainer Dimensions & Weights

A1

A D

B

E

C

1: 3" & 4" flanged Y-strainer uses split flange ring

Nominal Size PVC CPVC 1/2 5 3-1/16 2-9/16 1-5/8 1-9/16 3-3/8 .31 .33 3/4 5-3/4 3-11/16 3 2 2 4 .50 .53 1 6-7/8 4-7/16 3-5/8 2-1/4 2-1/2 4-3/4 .85 .90

1-1/4 8-5/32 5-5/16 4-1/4 2-13/16 3-1/16 5-9/16 1.21 1.28 1-1/2 9-1/8 6 4-7/8 3-3/16 3-9/16 6-5/16 1.66 1.76

2 11-3/4 7-5/8 6-3/16 3-1/2 4-1/2 7-1/2 2.96 3.10 3 15 9-11/16 7-5/8 5-1/8 6-9/16 10-5/16 5.34 5.64 4 19-11/16 12-1/2 9-7/8 6-9/16 8-5/8 13-1/8 9.97 10.45

A1 Socket

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) Socket Y-Strainer Dimensions & Weights

A1

A D

B

E

C

Socket SR Threaded Flanged

A1A D

B

C

E larkind Rectangle

LarkinD

(43)

(49)

(54)

(60)

(66)

(71)

(77)

(82)

(88)

(93)

(99)

PVC 150

(1.03)

(.93)

(.76)

(.52)

(.34)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

CPVC 150

(1.03)

(.97)

(.90)

(.83)

(.76)

(.70)

(.62)

(.55)

(.48)

(.41)

(.34)

-0- (-0-)

System Operating

Strainer Pressure Rating psi

(Mpa)

Temperature Pressure Rating

8 12 20 30 1/2 5.5 5.4 5.3 5.2 3/4 8.2 7.8 7.5 7.2 1 14.3 13.9 13.6 13.3

1-1/4 33.6 32.9 29.4 25.4 1-1/2 43.8 41.6 33.0 32.1

2 50.6 50.0 49.6 48.8 3 75.2 74.6 74.0 73.4 4 169.5 169.0 168.8 168.0

Nominal Size

Plastic Strainer MeshY-Strainer Size Tap Size (NPT) 1/2 1/4 - 18 3/4 1/4 - 18 1 3/8 - 18

1-1/4 1/2 - 14 1-1/2 1 - 11-1/2

2 1 - 11-1/2 3 1 - 11-1/2 4 1 - 11-1/2

Drain Plug Tap Size for Bleed-Off Valve Y-Strainer Cv

Gallons per minute at 1 psi pressure drop.

Plastic Strainers are perforated PVC or CPVC screens.

Standard is mesh.

Y-STRAINERS

larkind Rectangle larkind Rectangle

Sample Engineering Specification All sediment strainers shall be Y-type constructed from PVC Type I, ASTM D 1784 Cell Classification 12454 or CPVC Type IV, or ASTM D1784 Cell Classification 23447. All O-rings shall be EPDM or genuine Viton®. All Y-strainers shall have replaceable PVC, CPVC or Type 316 stainless steel screens and O-ring sealed drain plugs with magnetic drain plug option. All threaded Y-Strainers shall have Stainless Steel Reinforced (SR) threads. All Y-Strainers, sizes 1/2"- 2" shall be pressure rated to 150 psi, sizes 3"- 4" to 90 psi for water at 73° F, as manufactured by Spears Manufacturing Company.

Features Spears Y-type sediment strainers are the perfect choice for in-line removal of suspended solids, sediment, dirt and debris. Convenient removable strainer basket allows quick cleaning with an assortment of screen mesh sizes to meet a variety of application needs.

Spears Y-Strainers are produced from PVC Gray, PVC Clear for fluid visibility and CPVC Gray for higher temperatures. Available with socket, Stainless Steel Reinforced (SR) threads, or flanged end connectors in IPS sizes 1/2" - 4".

• Provides In-line Protection of Process Equipment

• PVC, CPVC or PVC Clear Construction

• EPDM or genuine Viton® O-ring Seals

• Removable Strainer Basket with O-ring Sealed Drain Plug Allows Quick-Flushing or Bleed-Off Valve Connection

• Multiple Strainer Screen Options in PVC, CPVC, and Type 316 Stainless Steel (see Mesh Code table)

• Optional Magnetic Drain Plug for Ferrous Metal Pickup

• Suitable for Horizontal or Vertical Installation

• Sizes 1/2"- 2" Pressure Rated to 150 psi @ 73°F Sizes 3"- 4" to 90 psi @ 73°F

• Assemble with Silicon-Free, Water Soluble Lubricants Quick-View Y-Strainer Selection Chart

Quick-Change Strainer Screen

Assembly Optional Mesh

Screens Available

Optional Magnetic Plug

Enter Mesh Code in part number blank as specified in table.

(Contact Spears for additional strainer sizes).

1: For CPVC body & strainer screen unit, replace the letter “P” before the dash separator with the letter “C” and add the letter “C” to the part number (e.g., YS22C8-020C)

2: For stainless steel strainer screens, replace the letter “P” (or “C”) before the dash separator with the letter “S” (e.g., YS22S8-020; YS22S8-020C)

3: For PVC Clear Y-Strainer, add the letters "CL" to the part number (e.g., YS22P8-005CL) Note: End connections for PVC Clear threaded and flanged Y-strainers are PVC Gray components.

Valve O-ring Pressure Size Material Socket SR Threaded Flanged Rating

EPDM YS22P__-005 YS21P__-005SR YS23P__-005

Viton® YS32P__-005 YS31P__-005SR YS33P__-005

EPDM YS22P__-007 YS21P__-007SR YS23P__-007

Viton® YS32P__-007 YS31P__-007SR YS33P__-007

EPDM YS22P__-010 YS21P__-010SR YS23P__-010

Viton® YS32P__-010 YS31P__-010SR YS33P__-010 150 psi EPDM YS22P__-012 YS21P__-012SR YS23P__-012 Non-Shock Viton® YS32P__-012 YS31P__-012SR YS33P__-012 Water

EPDM YS22P__-015 YS21P__-015SR YS23P__-015 @73° F

Viton® YS32P__-015 YS31P__-015SR YS33P__-015

EPDM YS22P__-020 YS21P__-020SR YS23P__-020

Viton® YS32P__-020 YS31P__-020SR YS33P__-020 EPDM YS22P__-030 YS21P__-030SR YS23P__-030 90 psi Viton® YS32P__-030 YS31P__-030SR YS33P__-030 Non-Shock EPDM YS22P__-040 YS21P__-040SR YS23P__-040 Water Viton® YS32P__-040 YS31P__-040SR YS33P__-040 @73° F

1-1/4

1-1/2

PVC Material1,2,3

1/2

3/4

U.S.

Standard

Mesh Sieve No.

Sieve Opening Size (in.)

Part Number

Mesh Code

8 0.094 8 12 0.062 12 20 0.033 20 30 0.024 30

Additional Stainless Steel screens available to 320 mesh, custom ordered.

Mesh Codes for

PVC, CPVC & SS

larkind Text Box

WH172238

YS23P30-040

larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Rectangle larkind Text Box Document: NYCS000015183R00

Nominal Size PVC CPVC 1/2 4-7/8 3-1/16 2-1/2 1-5/8 3-5/8 5-1/16 .31 .33 3/4 5-15-16 3-11/16 3 2 4-3/8 5-13/16 .50 .53 1 7-1/16 4-7/16 3-5/8 2-1/4 5-3/16 7 .85 .90

1-1/4 8-3/8 5-5/16 4-1/4 2-13/16 6 7-15/16 1.21 1.28 1-1/2 9-3/8 6 4-7/8 3-3/16 6-15/16 8-13/16 1.66 1.76

2 12 7-5/8 6-3/16 3-1/2 8-1/8 10-1/8 2.96 3.10 3 15-5/16 9-11/16 7-5/8 5-1/8 11 14-1/4 5.34 5.64 4 19-13/16 12-1/2 9-7/8 6-9/16 14 14-3/8 9.97 10.45

A1

Threaded Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) SR Threaded Y-Strainer Dimensions & Weights

Nominal Size PVC CPVC 1/2 5-13/16 4-3/16 2-1/2 1-5/8 5-11/16 3-1/2 .82 .85 3/4 7-1/8 5 3-1/8 2 6-7/16 3-7/8 1.23 1.28 1 8-3/16 5-3/4 3-5/8 2-1/4 7-1/4 4-1/4 1.70 1.81

1-1/4 9-7/16 6-9/16 4-9/32 2-13/16 8-1/8 4-5/8 2.40 2.52 1-1/2 10-7/16 7-3/8 4-7/8 3-3/16 9-3/16 5 3.07 3.25

2 13-1/4 9-1/8 6-3/16 3-1/2 10-3/8 6 5.20 5.42 31 16-21/32 11-3/8 7-5/8 5-1/8 12-1/32 7-1/2 9.44 10.07 41 21-19/32 14-5/16 9-7/8 6-9/16 14-9/16 9-1/16 14.87 16.15

A1 Flanged

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16)

Flanged Y-Strainer Dimensions & Weights

A1

A D

B

E

C

1: 3" & 4" flanged Y-strainer uses split flange ring

Nominal Size PVC CPVC 1/2 5 3-1/16 2-9/16 1-5/8 1-9/16 3-3/8 .31 .33 3/4 5-3/4 3-11/16 3 2 2 4 .50 .53 1 6-7/8 4-7/16 3-5/8 2-1/4 2-1/2 4-3/4 .85 .90

1-1/4 8-5/32 5-5/16 4-1/4 2-13/16 3-1/16 5-9/16 1.21 1.28 1-1/2 9-1/8 6 4-7/8 3-3/16 3-9/16 6-5/16 1.66 1.76

2 11-3/4 7-5/8 6-3/16 3-1/2 4-1/2 7-1/2 2.96 3.10 3 15 9-11/16 7-5/8 5-1/8 6-9/16 10-5/16 5.34 5.64 4 19-11/16 12-1/2 9-7/8 6-9/16 8-5/8 13-1/8 9.97 10.45

A1 Socket

Approx. Wt. (Lbs.)

A D E B C

Dimension Reference (inches, ± 1/16) Socket Y-Strainer Dimensions & Weights

A1

A D

B

E

C

Socket SR Threaded Flanged

A1A D

B

C

E larkind Rectangle

LarkinD

(43)

(49)

(54)

(60)

(66)

(71)

(77)

(82)

(88)

(93)

(99)

PVC 150

(1.03)

(.93)

(.76)

(.52)

(.34)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

-0- (-0-)

CPVC 150

(1.03)

(.97)

(.90)

(.83)

(.76)

(.70)

(.62)

(.55)

(.48)

(.41)

(.34)

-0- (-0-)

System Operating

Strainer Pressure Rating psi

(Mpa)

Temperature Pressure Rating

8 12 20 30 1/2 5.5 5.4 5.3 5.2 3/4 8.2 7.8 7.5 7.2 1 14.3 13.9 13.6 13.3

1-1/4 33.6 32.9 29.4 25.4 1-1/2 43.8 41.6 33.0 32.1

2 50.6 50.0 49.6 48.8 3 75.2 74.6 74.0 73.4 4 169.5 169.0 168.8 168.0

Nominal Size

Plastic Strainer MeshY-Strainer Size Tap Size (NPT) 1/2 1/4 - 18 3/4 1/4 - 18 1 3/8 - 18

1-1/4 1/2 - 14 1-1/2 1 - 11-1/2

2 1 - 11-1/2 3 1 - 11-1/2 4 1 - 11-1/2

Drain Plug Tap Size for Bleed-Off Valve Y-Strainer Cv

Gallons per minute at 1 psi pressure drop.

Plastic Strainers are perforated PVC or CPVC screens.

Standard is mesh.

Y-STRAINERS

larkind Rectangle larkind Rectangle