B09_Attachment_44_-_10_28_00_-_TOILET_ACCESSORIES_0007.pdf
PDF 114 KB Posted
- Solicitation number
- 140P2024R0114
About this file
This document is a product specification for toilet accessories to be included in the Kilauea Visitor Center (KVC) rehabilitation project at Hawaii Volcanoes National Park. The key details include:
The specification covers the required toilet accessories, including soap dispensers, hand dryers, baby changing stations, toilet paper dispensers, toilet seat cover dispensers, grab bars, and feminine napkin receptacles. The accessories are to be fabricated from stainless steel and other durable materials. Performance requirements include structural and electrical safety standards. The specification provides a detailed schedule of the products to be supplied and installation instructions. This document appears to be an attachment to the broader solicitation for the KVC rehabilitation project, which is Phase II of a larger infrastructure repair effort at the park following a 2018 volcanic event.
View the file
Other files
Show 40 more
Latest 50 of 72 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION 10 28 00 – TOILET ACCESSORIES
PART 1 - GENERAL
1.1 COORDINATION
A. Coordinate accessory locations with other work to prevent interference with clearances required for access by people with disabilities, and for proper installation, adjustment, operation, cleaning, and servicing of accessories.
B. Deliver inserts and anchoring devices set into concrete or masonry as required to prevent delaying the Work.
1.2 SUBMITTALS
A. Product data
PART 2 - PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, by a qualified testing agency, and marked for intended location and application.
B. Structural Performance: Design accessories and fasteners to comply with the following requirements:
1. Grab Bars: Installed units are able to resist 250 lbf concentrated load applied in any direction and at any point.
2.2 FABRICATION
A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors and access panels with full-length, continuous hinges. Equip units for concealed anchorage and with corrosion-resistant backing plates.
B. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.
Provide minimum of six keys to Owner's representative.
2.3 SCHEDULE OF PRODUCTS TO BE SUPPLIED
A. Soap Dispenser: Commercial wall mount brushed type 304 stainless steel foaming soap dispenser, 40 ounce size. Supply with two refills for each soap dispenser, each of 1200 ml size.
danah.palik Cloud
B. Hand Dryer: Wall mounted, heavy duty stainless steel with automatic heating (heating turns on when temperatures are below 25 degrees C). Provide with HEPA filter. Product shall have a minimum 2-year warranty.
C. Baby Changing Station for Men’s and Women’s Rooms: Fabricated of thermoformed high density polyethylene and designed to be partially recessed into the countertop. Provide with nylon safety straps.
D. Baby Changing Station, Wall Mounted: Recessed, horizontal type, Type 304 stainless steel construction exterior and injection molded polypropylene interior. Depth closed shall be a maximum of 2.75-inches. Unit shall be approximately 41.25-inches by 26.25 inches in size.
Bottom of wall recess shall be 2’-2 ½” from floor. Provide with concealed operator that allows for slow controlled opening and closing of the bed. Unit shall have a built-in liner dispenser, have instructional graphics and safety messages in four languages. Changing area shall be smooth and be provided with safety strap.
E. Toilet Paper Dispenser: Type 304 stainless steel, 18 gauge. Shall hold two rolls of toilet paper up to 9-inches in diameter. Provide with theft resistant tumbler lock.
F. Toilet Seat Cover Dispenser: Surface mounted maximum 2-inches deep. Fabricate of 22 gauge Type 304 stainless steel to hold a box of 250 seat covers.
G. Grab Bars: Type 304 stainless steel, 18 gauge or thicker, 1.25-inch outside diameter. Provide with 1.5-inch clearance to wall, concealed flanges approximately 3-inches in diameter.
H. Feminine Napkin Receptacle: One wall-mounted receptacle per stall in Women’s Room, 11 inches high by 9 inches wide, 4-1/4 inches deep, stainless steel.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install accessories in accordance with manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.
1. Remove temporary labels and protective coatings.
ADJUSTING AND CLEANING
A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items.
B. Clean and polish exposed surfaces in accordance with manufacturer's written instructions.
END OF SECTION
| 1.2 SUBMITTALS |
| A. Product data |
| A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, by a qualified testing agency, and marked for intended location and application. |
| A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors and access panels with full-length, continuous hinges. Equip units for concealed anchorage and with corrosion-resistant backing plates. |
| 2.3 SCHEDULE OF PRODUCTS TO BE SUPPLIED |
| A. Soap Dispenser: Commercial wall mount brushed type 304 stainless steel foaming soap dispenser, 40 ounce size. Supply with two refills for each soap dispenser, each of 1200 ml size. |
| B. Hand Dryer: Wall mounted, heavy duty stainless steel with automatic heating (heating turns on when temperatures are below 25 degrees C). Provide with HEPA filter. Product shall have a minimum 2-year warranty. |
| C. Baby Changing Station for Men’s and Women’s Rooms: Fabricated of thermoformed high density polyethylene and designed to be partially recessed into the countertop. Provide with nylon safety straps. |
| D. Baby Changing Station, Wall Mounted: Recessed, horizontal type, Type 304 stainless steel construction exterior and injection molded polypropylene interior. Depth closed shall be a maximum of 2.75-inches. Unit shall be approximately 41.25-inches ... |
| E. Toilet Paper Dispenser: Type 304 stainless steel, 18 gauge. Shall hold two rolls of toilet paper up to 9-inches in diameter. Provide with theft resistant tumbler lock. |
| F. Toilet Seat Cover Dispenser: Surface mounted maximum 2-inches deep. Fabricate of 22 gauge Type 304 stainless steel to hold a box of 250 seat covers. |
| G. Grab Bars: Type 304 stainless steel, 18 gauge or thicker, 1.25-inch outside diameter. Provide with 1.5-inch clearance to wall, concealed flanges approximately 3-inches in diameter. |
| H. Feminine Napkin Receptacle: One wall-mounted receptacle per stall in Women’s Room, 11 inches high by 9 inches wide, 4-1/4 inches deep, stainless steel. |
| A. Install accessories in accordance with manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated. |
| A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items. |
File details come from the government source that posted it. Updated .