S02 - SOW - Att 38 - Cut Sheet 16 - EHRM Infra Upgrades - Constr - Togus.pdf

This is a product specification sheet for the M3C Filter Polisher, a fuel filtration and polishing system manufactured by Earthsafe Systems, Inc. The M3 series is available in three flow capacity options: 3 GPM (10 LPM), 5 GPM (20 LPM), and 10 GPM (40 LPM), with standard pressure capacity of 25 PSI (170 kPa). The unit features a compact welded steel construction measuring 36"W x 32"H x 12"D, weighing approximately 300 lbs, and is available with either an open frame or weatherproof enclosure. The system employs a positive displacement Viking H475 Series pump, magnetic conditioner, centrifugal filter separator, and final 1-micron dirt and water filtration. Inlet and outlet connections vary by capacity: 0.50 IN (12 MNPT) for 3 and 5 GPM models and 0.75 IN (18 MNPT) for the 10 GPM model.

The M3C operates on 120-230 VAC, single-phase, 50-60 Hz power with motor ratings of 0.33–1.0 HP (0.25–0.75 KW) and features a TEFC (IP 55) motor with integrated C1 controller and motor overload relay. The system includes comprehensive monitoring of inlet vacuum, outlet high pressure, filter water, flow, and leak conditions via multiple sensors, with output relays for filter run, filter alarm, and filter leak functions. The operator interface includes a Man-Off-Auto switch, programmable cycle time settings, pump run hour meter, and indicator lights for power, pump run, and alarm status. Standard accessories include a 3-gallon containment basin, suction and pressure gauges, and all required sensors. Optional accessories include a floor stand, C8 control module, Modbus interface, stainless steel enclosures, and dual-tank control capability. Contact information: Earthsafe Systems, Inc., 1000 W. Crossroads Parkway, Bolingbrook, IL 60490; (312) 226-7600; info@earthsafe.com.