Am-0010.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

N62742-25-R-1301, FY25 MCON P-693 PDI: GUAM DEFENSE SYSTEM, COMMAND CENTER,

JOINT REGION MARIANAS, GUAM

Amendment No. 0010 is continued on page 2.

NAVFAC PACIFIC

CONSTR CONTRACTS BRANCH (CODE CON33)

258 MAKALAPA DR STE 100

JBPHH HI 96860-3134

N6274225R1301

1 7

01/16/2025

10/30/2024

RFP No. N6274225R1301

Amendment No. 0010

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

DOCUMENT 00 21 16 INSTRUCTIONS TO PROPOSERS

Delete pages 1 through 21 (Amendment 0008) in its entirety and replace with pages 1 through 21 (Amendment

0010).

PROJECT TABLE OF CONTENTS

Delete the Project Table of Contents in its entirety and replace with PROJECT TABLE OF CONTENTS (dated 9

January 2025). The revised Table of Contents accompanies this Amendment. See Attachment (1).

SECTION 00 01 15.00 14 – LIST OF DRAWINGS

PARA 1.2 CONTRACT DRAWINGS: The following drawings, bearing revision date as indicated, supersede previously issued drawings bearing the same number and title. The revised drawings accompany this Amendment.

See Attachment (2).

NAVFAC

DWG NO.

SHEET NO.

REV

NO.

REVISION

DATE

TITLE

17323203 14GI-E-001 1 09JAN2025 GENERAL - ELECTRICAL ABBREVIATIONS

17323206 14GI-E-004 2 09JAN2025

GENERAL - ELECTRICAL CIRCUIT AND

RACEWAY LEGEND

17323183 14GI-G-022 1 07JAN2025 CONSTRUCTION PLANNING

17323312 14ST-C-505 1 07JAN2025 PAVEMENT DETAILS

17323330 14ST-C-540 1 07JAN2025 DRAINAGE DETAILS

17323246 14ST-CS106 1 07JAN2025 SITE LAYOUT PLAN - PANEL B03

17323248 14ST-CS108 1 07JAN2025 SITE LAYOUT PLAN - PANEL C02

17323266 14ST-CG106 2 07JAN2025 GRADING & DRAINAGE PLAN - PANEL B03

17323268 14ST-CG108 1 07JAN2025 GRADING & DRAINAGE PLAN - PANEL C02

17323271 14ST-CG202 1 07JAN2025 DRAINAGE PROFILES

17323272 14ST-CG203 1 07JAN2025 DRAINAGE PROFILES

17323365 14ST-MS101 1 08JAN2025 FUEL UNLOADING PLAN

17323387 14ST-ES104 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL B01

17323388 14ST-ES105 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL B02

17323389 14ST-ES106 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL B03

17323390 14ST-ES107 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL C01

17323391 14ST-ES108 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL C02

17323392 14ST-ES109 1 09JAN2025 SITE ELECTRICAL PLAN - PANEL C03

17323394 14ST-ES201 1 08JAN2025 SITE ELECTRICAL PROFILE

17323395 14ST-ES221 1 08JAN2025 SITE ELECTRICAL PROFILE

17323396 14ST-ES222 1 08JAN2025 SITE ELECTRICAL PROFILE

17323397 14ST-ES401 1 09JAN2025 ENLARGED PLAN - FUEL UNLOADING

17323398 14ST-ES402 1 09JAN2025 ENLARGED PLAN - TRANSFORMERS

17323407 14ST-EP503 1 09JAN2025

SITE -ELECTRICAL DETAIL - DUCTBANK

SECTIONS

17323408 14ST-EP504 1 09JAN2025

SITE -ELECTRICAL DETAIL - DUCTBANK

SECTIONS

17323436 14ST-EP505 1 09JAN2025

SITE - ELECTRICAL DETAIL - DUCTBANK

SECTIONS

17323419 14ST-EP701 2 09JAN2025 SITE - PANEL SCHEDULE

17323437 14ST-EP702 2 09JAN2025 SITE - PANEL SCHEDULE

NAVFAC

DWG NO.

SHEET NO.

REV

NO.

REVISION

DATE

TITLE

17323378 14ST-EU501 1 09JAN2025 SITE ELECTRICAL UTILITY - DETAILS

17323379 14ST-EU502 1 09JAN2025 SITE ELECTRICAL UTILITY - DETAILS

17323427 14ST-EG100 1 09JAN2025 SITE GROUNDING KEY PLAN

17323435 14ST-EI601 1 09JAN2025

SITE - FACILITY AND ACTIVE VEHICLE BARRIER

CONTROL SYSTEMS BLOCK DIAGRAM

17323450 14ST-TS201 1 08JAN2025 SITE COMMUNICATIONS PROFILES

17323451 14ST-TS202 1 08JAN2025 SITE COMMUNICATIONS PROFILES

17323452 14ST-TS203 1 08JAN2025 SITE COMMUNICATIONS PROFILES

17323464 14ST-TS204 1 08JAN2025 SITE COMMUNICATIONS PROFILES

17323453 14ST-TS501 1 09JAN2025

SITE COMMUNICATIONS DETAILS - (OUTSIDE

BOUNDARY)

17323465 14ST-TS508 1 09JAN2025 TELECOMMUNICATIONS MANHOLE DETAILS

17323468 14ST-TS511 1 09JAN2025

TELECOMMUNICATIONS DUCTBANK SECTION

DETAILS

17323461 14ST-TS602 1 09JAN2025 SITE -TELECOMMUNICATIONS RISER DIAGRAM

17323473 14ST-TY106 1 07JAN2025 SITE SECURITY PLAN - PANEL B03

17323475 14ST-TY108 1 07JAN2025 SITE SECURITY PLAN - PANEL C02

17323479 14ST-TY503 1 07JAN2025 SITE SECURITY DETAILS

17323481 14ST-TY505 1 07JAN2025 SITE SECURITY DETAILS

17323482 14ST-TY506 1, 2 07JAN2025 SITE SECURITY DETAILS

17323503 14CC-S-004 1 08JAN2025 COMMAND CENTER - GENERAL NOTES

17323736 14CC-A-131 1 08JAN2025

COMMAND CENTER - FIRST FLOOR REFLECTED

CEILING PLAN - OVERALL

17323737 14CC-A-132 1 08JAN2025

COMMAND CENTER - FIRST FLOOR REFLECTED

CEILING PLAN - AREA A

17323739 14CC-A-134 2 07JAN2025

COMMAND CENTER - FIRST FLOOR REFLECTED

CEILING PLAN - AREA C

17323759 14CC-A-402 1 07JAN2025

COMMAND CENTER - ENLARGED PLANS AND

INTERIOR ELEVATIONS

17323775 14CC-A-430 2 08JAN2025

COMMAND CENTER - ENLARGED EXTERIOR

STAIR PLANS AND SECTIONS

17323776 14CC-A-431 3, 4 08JAN2025

COMMAND CENTER - ENLARGED RAMP AND

STAIR PLANS, SECTIONS AT FRONT

ENTRANCE

17323777 14CC-A-432 2 08JAN2025

COMMAND CENTER - ENLARGED EXTERIOR

STAIR PLANS AND SECTIONS

17323780 14CC-A-435 1 08JAN2025

COMMAND CENTER – ENLARGED STAIR AND

RAILING DETAILS

17323781 14CC-A-436 1 07JAN2025

COMMAND CENTER - ENLARGED STAIR AND

RAILING DETAILS

17323788 14CC-A-501 5 07JAN2025 COMMAND CENTER - ARCH PARTITION TYPES

17323814 14CC-A-502 2 07JAN2025 COMMAND CENTER - ARCH PARTITION TYPES

17323804 14CC-A-601 2 07JAN2025 COMMAND CENTER - FINISH LEGEND

17323805 14CC-A-602 3 07JAN2025 COMMAND CENTER - ROOM FINISH SCHEDULE

17323806 14CC-A-611 5 07JAN2025 COMMAND CENTER - DOOR SCHEDULE

SHEET NO.

REV

NO.

REVISION

DATE

TITLE

17323817 14CC-I-112 1 07JAN2025

COMMAND CENTER - FIRST FLOOR FINISH PLAN

- AREA A

17323818 14CC-I-113 2 07JAN2025

COMMAND CENTER - FIRST FLOOR FINISH PLAN

- AREA B

17323819 14CC-I-114 1 07JAN2025

COMMAND CENTER - FIRST FLOOR FINISH PLAN

- AREA C

17323820 14CC-I-115 1 07JAN2025

COMMAND CENTER - FIRST FLOOR FINISH PLAN

- AREA D

17323901 14CC-M-505 1 08JAN2025 COMMAND CENTER - MECHANICAL DETAILS

17323906 14CC-M-601 1 08JAN2025

COMMAND CENTER - MECHANICAL

SCHEMATICS

17323937 14CC-MH114 4 08JAN2025

COMMAND CENTER - MECHANICAL HVAC PLAN

- AREA C

17324212 14CC-EL404 1 09JAN2025

COMMAND CENTER - ENLARGED LIGHTING

PLAN - RM 123, 124, AND RM 158

17324135 14CC-EG502 1 09JAN2025 COMMAND CENTER - GROUNDING DETAILS

17324148 14CC-EI113 2 08JAN2025

COMMAND CENTER - INSTRUMENTATION &

CONTROL PLAN - AREA B

17324270 14CC-T-113 2 09JAN2025

COMMAND CENTER -INSTRUMENTATION &

CONTROL PLAN - AREA B

17324294 14CC-T-601 1 08JAN2025

COMMAND CENTER -TELECOMMUNICATIONS -

ONE-LINE DIAGRAM

17324435 14PP-S-104 1 08JAN2025 POWER PLANT - FOUNDATION PLAN - AREA C

17324436 14PP-S-112 1 08JAN2025 POWER PLANT - FIRST FLOOR PLAN - AREA A

17324442 14PP-S-201 1 09JAN2025 POWER PLANT - WALL ELEVATIONS

17324443 14PP-S-202 1 09JAN2025 POWER PLANT - WALL ELEVATIONS

17324451 14PP-S-520 1 08JAN2025 POWER PLANT - BASE PLATE DETAILS

17324497 14PP-FA112 2 08JAN2025 POWER PLANT - FIRE ALARM PLAN - AREA A

17324527 14PP-M-502 1 08JAN2025 POWER PLANT - MECHANICAL DETAILS

17324530 14PP-M-601 1 08JAN2025 POWER PLANT - MECHANICAL SCHEMATICS

17324533 14PP-M-702 1 08JAN2025 POWER PLANT - MECHANICAL SCHEDULES

17324534 14PP-M-703 3 08JAN2025 POWER PLANT - MECHANICAL SCHEDULES

17324541 14PP-M-806 2 08JAN2025 POWER PLANT - MECHANICAL CONTROLS

17324560 14PP-EP103 1 09JAN2025

POWER PLANT - UNDERFLOOR RACEWAY PLAN

- AREA B

17324561 14PP-EP104 1 09JAN2025

POWER PLANT - UNDERFLOOR RACEWAY PLAN

- AREA C

17324564 14PP-EP113 2 09JAN2025

POWER PLANT - FIRST FLOOR POWER PLAN -

AREA B

17324569 14PP-EP401 2 09JAN2025

POWER PLANT - ENLARGED UNDERFLOOR

RACEWAY PLAN

17324570 14PP-EP402 2 09JAN2025

POWER PLANT - ENLARGED UNDERFLOOR

RACEWAY PLAN

17324574 14PP-EP521 1 09JAN2025

POWER PLANT - ELECTRICAL DETAILS - GENSET

ENCLOSURE

17324579 14PP-EP604 1 09JAN2025 POWER PLANT - ONE-LINE DIAGRAM - 125 VDC

SHEET NO.

REV

NO.

REVISION

DATE

TITLE

17324613 14PP-EP702 2 09JAN2025 POWER PLANT - PANEL SCHEDULE

17324630 14PP-EG112 1 09JAN2025 POWER PLANT - GROUNDING PLAN - AREA A

17324631 14PP-EG113 1 09JAN2025 POWER PLANT - GROUNDING PLAN - AREA B

17324632 14PP-EG114 1 09JAN2025 POWER PLANT - GROUNDING PLAN - AREA C

17324638 14PP-EG502 1 09JAN2025 POWER PLANT - GROUNDING DETAILS

17324642 14PP-EI112 2 09JAN2025

POWER PLANT - BUILDING CONTROL SYSTEM

PLAN - AREA A

17324655 14PP-EI611 2 09JAN2025

POWER PLANT - PCMS-14PP69101A - ENCLOSURE

BLOCK DIAGRAM

17324656 14PP-EI612 2 09JAN2025

POWER PLANT - PCMS-14PP69101B - ENCLOSURE

BLOCK DIAGRAM

17324658 14PP-EI750 2 09JAN2025 POWER PLANT - PCMS CONDUIT SCHEDULE

17324659 14PP-EI760 1 09JAN2025 POWER PLANT - PCMS CIRCUIT SCHEDULE

17324727 14PP-EI944 3 09JAN2025 POWER PLANT - PCMS I/O LIST - SHEET 44

SECTION 01 33 00 SUBMITTAL REGISTER

Delete the Submittal Register in its entirety and replace with Section 01 33 00 SUBMITTAL REGISTER (dated 9

January 2025). The revised Submittal Register accompanies this Amendment. See Attachment (3).

SECTION 02 41 00.00 14 DEMOLITION

Delete this Section in its entirety and replace with Section 02 41 00.00 14 DEMOLITION (dated 9 January 2025).

The revised Section accompanies this Amendment. See Attachment (4).

SECTION 03 30 00.00 14 CAST-IN-PLACE CONCRETE

Delete this Section in its entirety and replace with Section 03 30 00.00 14 CAST-IN-PLACE CONCRETE (dated 9

January 2025). The revised Section accompanies this Amendment. See Attachment (5).

SECTION 06 20 00.00 14 FINISH CARPENTRY

Delete this Section in its entirety and replace with Section 06 20 00.00 14 FINISH CARPENTRY (dated 9 January

2025). The revised Section accompanies this Amendment. See Attachment (6)

SECTION 08 71 00.00 14 DOOR HARDWARE

Delete this Section in its entirety and replace with Section 08 71 00.00 14 DOOR HARDWARE (dated 9 January

2025). The revised Section accompanies this Amendment. See Attachment (7).

SECTION 09 69 13.00 14 RIGID GRID ACCESS FLOORING

Delete this Section in its entirety and replace with Section 09 69 13.00 14 RIGID GRID ACCESS FLOORING

(dated 9 January 2025). The revised Section accompanies this Amendment. See Attachment (8)

SECTION 10 22 39.00 14 FOLDING PANEL PARTITIONS

Delete this Section in its entirety and replace with Section 10 22 39.00 14 FOLDING PANEL PARTITIONS (dated

9 January 2025). The revised Section accompanies this Amendment. See Attachment (9).

SECTION 10 28 13.00 14 TOILET ACCESSORIES

Delete this Section in its entirety and replace with Section 10 28 13.00 14 TOILET ACCESSORIES (dated 9

January 2025). The revised Section accompanies this Amendment. See Attachment (10).

SECTION 23 30 00.00 14 HVAC AIR DISTRIBUTION

Delete this Section in its entirety and replace with Section 23 30 00.00 14 HVAC AIR DISTRIBUTION (dated 9

January 2025). The revised Section accompanies this Amendment. See Attachment (11).

SECTION 25 05 11.78 14 CYBERSECURITY FOR FACILITY-RELATED CONTROL SYSTEMS –

ELECTRONIC SECURITY SYSTEM – CRASH RATED ACTIVE AND PASSIVE VEHICLE BARRIERS

AND CONTROLS

Delete this Section in its entirety and replace with Section 25 05 11.78 14 CYBERSECURITY FOR FACILITY-

RELATED CONTROL SYSTEMS – ELECTRONIC SECURITY SYSTEM – CRASH RATED ACTIVE AND

PASSIVE VEHICLE BARRIERS AND CONTROLS (dated 9 January 2025). The revised Section accompanies this

Amendment. See Attachment (12).

SECTION 26 05 73.00 14 POWER SYSTEM STUDIES

Delete this Section in its entirety and replace with Section 26 05 73.00 14 POWER SYSTEM STUDIES (dated 9

January 2025). The revised Section accompanies this Amendment. See Attachment (13).

SECTION 26 13 13.00 14 METAL-CLAD SWITCHGEAR

Delete this Section in its entirety and replace with Section 26 13 13.00 14 METAL-CLAD SWITCHGEAR (dated 9

January 2025). The revised Section accompanies this Amendment. See Attachment (14).

SECTION 26 23 00.00 14 LOW-VOLTAGE SWITCHGEAR

Delete this Section in its entirety and replace with Section 26 23 00.00 14 LOW-VOLTAGE SWITCHGEAR (dated

9 January 2025). The revised Section accompanies this Amendment. See Attachment (15).

SECTION 26 24 13.00 14 SWITCHBOARDS

Delete this Section in its entirety and replace with Section 26 24 13.00 14 SWITCHBOARDS (dated 9 January

2025). The revised Section accompanies this Amendment. See Attachment (16).

SECTION 26 29 23.00 14 ADJUSTABLE SPEED DRIVE (ASD) SYSTEMS UNDER 600 VOLTS

Delete this Section in its entirety and replace with Section 26 29 23.00 14 ADJUSTABLE SPEED DRIVE (ASD)

SYSTEMS UNDER 600 VOLTS (dated 9 January 2025). The revised Section accompanies this Amendment. See

Attachment (17).

SECTION 26 32 15.00 14 ENGINE-GENERATOR SET STATSIONARY 15-2500 KW, WITH

AUXILARIES

Delete this Section in its entirety and replace with Section 26 32 15.00 14 ENGINE-GENERATOR SET

STATSIONARY 15-2500 KW, WITH AUXILARIES (dated 9 January 2025). The revised Section accompanies this

Amendment. See Attachment (18).

SECTION 26 36 23.00 14 AUTOMATIC TRANSFER SWITCHES AND BY-PASS/ISOLATION SWITCH

Delete this Section in its entirety and replace with Section 26 36 23.00 14 AUTOMATIC TRANSFER SWITCHES

AND BY-PASS/ISOLATION SWITCH (dated 9 January 2025). The revised Section accompanies this Amendment.

See Attachment (19).

SECTION 26 41 00.00 14 LIGHTNING PROTECTION SYSTEM

Delete this Section in its entirety and replace with Section 26 41 00.00 14 LIGHTNING PROTECTION SYSTEM

(dated 9 January 2025). The revised Section accompanies this Amendment. See Attachment (20).

SECTION 31 21 13.00 14 RADON MITIGATION

Delete this Section in its entirety and replace with Section 31 21 13.00 14 RADON MITIGATION (dated 9 January

2025). The revised Section accompanies this Amendment. See Attachment (21).

SECTION 32 31 13.53 14 RESTRICTED AREA SECURITY FENCE

Delete this Section in its entirety and replace with Section 32 31 13.53 14 RESTRICTED AREA SECURITY

FENCE (dated 9 January 2025). The revised Section accompanies this Amendment. See Attachment (22).

SECTION 33 09 52.00 14 FUEL PUMP CONTROL AND ANNUNCIATION SYSTEM (NON-HYDRANT)

Delete this Section in its entirety and replace with Section 33 09 52.00 14 FUEL PUMP CONTROL AND

ANNUNCIATION SYSTEM (NON-HYDRANT) (dated 9 January 2025). The revised Section accompanies this

Amendment. See Attachment (23).

SECTION 33 52 40.00 14 FUEL SYSTEMS PIPING (NON-HYDRANT)

Delete this Section in its entirety and replace with Section 33 52 40.00 14 FUEL SYSTEMS PIPING (NON-

HYDRANT) (dated 9 January 2025). The revised Section accompanies this Amendment. See Attachment (24).

SECTION 33 71 02.00 14 UNDERGROUND ELECTRICAL DISTRIBUTION

Delete this Section in its entirety and replace with Section 33 71 02.00 14 UNDERGROUND ELECTRICAL

DISTRIBUTION (dated 9 January 2025). The revised Section accompanies this Amendment. See Attachment (25).

SECTION 34 75 13.13 14 CRASH RATED ACTIVE AND PASSIVE VEHICLE BARRIERS AND

CONTROLS

Delete this Section in its entirety and replace with Section 34 75 13.13 14 CRASH RATED ACTIVE AND

PASSIVE VEHICLE BARRIERS AND CONTROLS (dated 9 January 2025). The revised Section accompanies this

Amendment. See Attachment (26).

-- End of Amendment --

FY25 MCON P-693 PDI: GUAM DEFENSE SYSTEM, COMMAND CENTER WON 1812861

RFP N62742-25-R-1301

DOCUMENT 00 21 16

Amendment No. 0010

DOCUMENT 00 21 16

INSTRUCTIONS TO PROPOSERS

1/ 254

1.1 NUMBER OF COPIES/TIME OF RECEIPT

a. PRICE PROPOSAL (PAPER): An original paper and one (1) paper copy of the price proposal shall be submitted on 23 January 2025 13 February 2025, 2:00 p.m., H.S.T. in a sealed envelope and marked in the bottom right corner "PRICE PROPOSAL SUBMITTED UNDER RFP N62742-25-R-1301 - DO NOT OPEN IN

MAILROOM." The PRICE PROPOSAL shall include the following:

(1) Pursuant to FAR 52.236-28(a) manually (wet signature) signed and completed SF 1442 (Solicitation, Offer and Award)(NOTE: SF1442 Block 14 shall include the offeror’s name and physical address exactly as shown in the System for Award Management registration. If mailing address is different from physical address, both addresses may be shown in Block 14, however both addresses shall be EXACTLY as shown in SAM)

(2) Signed and completed Bid Guarantee

(3) Representations and Certifications (See Document 00 45 00)(COMPLETE ALL PROVISIONS)

(4) Information required by paragraph 1.5, Pre-Award Survey/Responsibility Determination

(5) Information required by paragraph 1.6, Partnerships, Joint Ventures (JV), Limited Liability Companies

(LLC), Limited Partnerships (LP), Etc.

(6) Information required by paragraph 1.8, Complementary Pricing Information

b. TECHNICAL (FACTORS 1 THROUGH 5) (PAPER): An original paper and three (3) paper copies of the technical proposal for Factors 1 through 5 shall be submitted on 23 January 2025 13 February 2025, 2:00 p.m., H.S.T. in a sealed envelope/package/box and marked in the bottom right corner "TECHNICAL PROPOSAL

SUBMITTED UNDER RFP N62742-25-R-1301 - DO NOT OPEN IN MAILROOM." Identify the original proposal as "Original" on the cover of the proposal. The NON-PRICE PROPOSAL shall be submitted in a three-ring binder with table of contents and tabbed. The NON-PRICE PROPOSAL shall include the following:

(1) All information required by Factor 1, Experience

(2) All information required by Factor 2, Small Business Utilization and Participation

(3) All information required by Factor 3, Safety

(4) All information required by Factor 4, Management Plan

(5) All information required by Factor 5, Past Experience

c. SUBCONTRACTING PLAN (PAPER): An original paper and one (1) paper copy of the subcontracting plan shall be submitted by 23 January 2025 14 February 2025, 2:00 p.m., H.S.T. in a sealed envelope/package/box and marked in the bottom right corner "SUBCONTRACTING PLAN SUBMITTED UNDER RFP N62742-25-R-1301 -

DO NOT OPEN IN MAILROOM." Identify the original proposal as "Original" on the cover of the proposal.

(1) All information required by 1.7, Small Business Subcontracting Plan

Amendment No. 0010

d. PRICE AND TECHNICAL PROPOSALS (ELECTRONIC): An electronic copy of the price and technical proposals shall be submitted in .pdf format on a CD-ROM with the paper copy of the subcontracting plan. The offeror is responsible for ensuring that all original paper and electronic copies are identical. Should there be a discrepancy between the paper and electronic versions, the paper copy shall govern.

e. Proposals shall be submitted as follows:

(1) If sent via U. S. Postal Mail/Express Courier:

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND, PACIFIC

Construction Contracts Branch (CON33)

258 Makalapa Drive, Suite 100

Pearl Harbor, HI 96860-3134

(2) If hand-carried (Delivery hours between 7:00 AM and 2:00 PM, Monday through Friday except Federal

Holidays)

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND, PACIFIC

Construction Contracts Branch (CON33)

4256 Radford Drive, Building 62 (if facing the building office is on the right. DO NOT drop off at the

Navy Federal Credit Union)

Honolulu, HI 96818-3296

1.2 INSTRUCTIONS FOR OBTAINING THE REQUEST FOR PROPOSAL

The RFP can be accessed at https://sam.gov. Printed copies of the RFP will not be issued.

1.3 INSTRUCTIONS FOR SUBMITTING QUESTIONS REGARDING SOLICITATION

Questions regarding the solicitation shall be submitted in writing in WORD format via electronic mail to Ms. Dayna

Matsumura, dayna.n.matsumura.civ@navy.mil and Ms. Erin Hoe, erin.y.hoe.civ@us.navy.mil. Questions shall reference the drawing/detail and/or the specification section including paragraph number. Verbal queries will not be entertained. Responses to the questions will be provided in the form of a Notice and posted to the web site https://sam.gov. The Government may not respond to questions submitted less than 10 business days before the proposal receipt due date.

1.4 AMENDMENTS

Amendments will be posted to https://sam.gov. It is highly recommended that firms register on the SAM website as an interested vendor as this will be the only planholder’s list available. It is the offeror's responsibility to check the website periodically for any amendments to the solicitation.

1.5 PREAWARD SURVEY/RESPONSIBILITY DETERMINATION

FAR §9.104 requires prospective contractors to demonstrate, among other things, that they have adequate financial resources to perform the contract or the ability to obtain them, capability to comply with the required performance schedule, a satisfactory performance record, and be otherwise eligible to receive an award under applicable laws and regulations. The pre-award survey is not a part of the technical evaluation. The following information shall be submitted:

a. The offeror shall submit a document that appoints, in writing, one or more individuals, by name, each of whom will have full and independent authority to bind the offeror with respect to any act connected with this solicitation, including but not limited to: the submission and revisions of a proposal or proposals by the company, the conduct of discussion or negotiations, the submission of a Final Proposal Revision (FPR), and the execution of a contract and https://sam.gov/ mailto:dayna.n.matsumura.civ@navy.mil https://sam.gov/ https://sam.gov/

Amendment No. 0010 associated documents including bonds. Documents of appointment by a supporting resolution of the board of directors in the case of a corporation and by an instrument of similarly binding character in the case of an unincorporated entity. If bonds are not signed manually (wet signature), documents of appointment must include specific authorization and corporate approval for the use of electronic and facsimile signatures by the appointed individual(s).

b. Company financial statements (balance sheets and income statements) for past three years.

c. Financial resources available to perform the contract. Submit evidence of availability of working/operating capital that will be used for the performance of the contract. If the offeror plans to rely on financial support from other sources, identify the maximum lines of credit that will be available to include documentation to support the amounts. The maximum lines of credit should be based upon the inclusion of this contract effort. For joint ventures discuss the financial responsibilities for each partner.

d. Newly-formed entities (e.g. limited liability companies (“LLC’s”), limited partnerships (“LTD’s”) and newly-created corporate subsidiaries) that is the entity liable for the contract ordinarily have no financial capability to support a responsibility determination. In such cases, the offeror may rely on the resources of the LLC member, parent, limited partner, or other entities related to the offeror for responsibility purposes where the offer submits a guaranty from the entity providing the resources. The offeror shall provide a guaranty agreement (See Form DCMA

Form 1620 attached) for the contract price.

e. A list of existing commercial and government business commitments to include contract numbers, names of

Contracting Officers, telephone numbers, value of contract, completion date and percent complete. If the list of existing commitments is extensive, provide the required information on at least five projects of similar dollar value and a summary of the existing commitments to include number of contracts, total dollar value of all contracts, and total dollar value of work remaining.

f. Copy of the email confirmation of receipt notification of successful submission of the VETS-4212.

g. As a part of the pre-award survey, the contracting officer will verify that summary level scores of a current

NIST SP 800-171 DoD Assessment (i.e., not more than 3 years old unless a lesser time is specified in the solicitation) are posted in the Supplier Performance Risk Assessment (SPRS) (https://www.sprs.csd.disa.mil/) (see

DFARS 252.204-7019, Notice of NIST SP 800-171 DoD Assessment Requirements (MAR 2022)) prior to award.

At minimum, a current Basic NIST SP 800-171 DoD Assessment is required prior to award.

The information submitted for the pre-award survey will not be considered in the technical evaluation unless separately submitted pursuant to the technical evaluation factor submission requirements.

1.6 PARTNERSHIPS, JOINT VENTURES (JV), LIMITED LIABILITY COMPANIES (LLC), LIMITED

PARTNERSHIPS (LP), ETC.

Partnerships, Joint Ventures, Limited Liability Companies, Limited Partnerships and Mentor-Protégé arrangements shall submit the following documentation regarding their business entities:

a. A copy of the Partnership Agreement, JV Agreement(s), LLC Operating Agreement(s), LP Agreement(s), and/or Mentor-Protégé Agreement(s). Contractor shall provide an updated copy whenever any change is made to the agreement.

b. The proposal and each bond or other document submitted by or on behalf of the joint venture shall be executed by each joint venture partner and shall be accompanied by evidence of the authority of the signer. That authority shall be evidenced by a document satisfactory to the Contracting Officer, which would ordinarily be, in the case of a corporate joint venture partner, a certified copy of a resolution of the board of directors, and in the case of an unincorporated joint venture partner, an instrument of similarly binding character duly executed by that entity. If one https://www.sprs.csd.disa.mil/

Amendment No. 0010 individual signs for more than one partner, the individual must sign separately for each partner which he or she represents, and must state under each signature the capacity in which he or she is signing (See FAR 4.102).

c. Identify (by name and title) the personnel having the authority to legally bind the Offeror (including authority to execute the contract documents and bonds).

d. Procedures in the event the entity is dissolved.

e. A detailed statement outlining the following in terms of percentages where appropriate:

(1) The relationship of the partners/parties in terms of business ownership, capital contribution, profit distribution or loss sharing.

(2) The management approach in terms of who will conduct, direct, supervise, control, and the controlling partner’s authority to obligate the entity.

(3) The structure and decision-making responsibilities of the partners/parties in terms of who will control the manner and method of performance of work.

f. Joint Ventures shall submit the following additional documentation regarding their business entities:

(1) Together with its proposal, each corporate joint venture partner shall submit evidence satisfactory to the

Contracting Officer that its board of directors has approved its participation in the joint venture. Such evidence shall be in the form of a copy of a resolution of the board of directors, certified by the Secretary of the Corporation.

(2) Together with its proposal, each joint venture partner which is an unincorporated entity shall submit evidence satisfactory to the Contracting Officer that all persons or entities which must approve decisions affecting the joint venture partner have approved the participation of the joint venture partner in the joint venture.

1.7 SUBCONTRACTING PLAN

NAVFAC's command-wide small business subcontracting targets are shown below. These may be higher or lower than percentages that would represent realistic, challenging small business subcontracting goals for this acquisition.

Offerors representing as other than small businesses shall establish Small Business Subcontracting Plan goals that are consistent with their Small Business Participation Commitment Document submitted for evaluation under the

Small Business Participation source selection factor in this solicitation and shall document in their subcontracting plans the basis for all proposed goals. Plans shall be submitted with initial offers.

SB 40%

SDB 5%

HUBZone SB 3%

WOSB 9%

SDVOSB 3%

Small businesses identified by name in offerors’ Small Business Participation Commitment Document and considered in the evaluation shall be listed in small business subcontracting plans submitted pursuant to FAR

52.219-9 in order to facilitate compliance with 252.219-7003(e). There shall be no discrepancies between the

Small Business Participation Commitment Document (Document 00 22 00, Non-Price Evaluation Factor 2, Small Business Participation, Attachment C) and small business subcontracting plan.

c. See the Small Business Subcontracting Plan (Template) at the end of Document 00 21 16 for format.

Amendment No. 0010

1.8 COMPLEMENTARY PRICING INFORMATION

Offeror’s are requested to submit the attached Complementary Pricing Information (Template) at the end of

Document 00 21 16 with its proposal. The Complementary Pricing Information is for Government information only and will not be used for the Price Evaluation specified in Document 00 22 00.

1.9 FAR 52.204-7, SYSTEM FOR AWARD MANAGEMENT (NOV 2024)

(a) Definitions. As used in this provision—

“Electronic Funds Transfer (EFT) indicator” means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for

Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that–

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the

Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14) into the SAM;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of

Contact sections of the registration in the SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer

Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record “Active”.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b) (1) An Offeror is required to be registered in SAM when submitting an offer or quotation and at the time of award (see FAR clause 52.204-13, System for Award Maintenance, for the requirement to maintain SAM registration during performance and through payment).

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation

“Unique Entity Identifier” followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in the SAM.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

https://www.acquisition.gov/content/subpart-3211-electronic-funds-transfer#i1080713 https://www.acquisition.gov/content/subpart-414-reporting-executive-compensation-and-first-tier-subcontract-awards#i1121746 http://www.sam.gov/ http://www.sam.gov/

Amendment No. 0010

(10) Company headquarters name and address (reporting relationship within your entity).

(d) Processing time should be taken into consideration when registering. Offerors who are not registered in SAM should consider applying for registration immediately upon receipt of this solicitation. See https://www.sam.gov for information on registration.

1.10 FAR 52.204-16, COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020)

(a) Definition. As used in this provision –

Commercial and Government Entity (CAGE) code means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics

Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO

Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the

DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

(b) The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its proposal. The CAGE code must be for that name and location address. Insert the word “CAGE” before the number. The CAGE code is required prior to award.

(c) CAGE codes may be obtained via–

(1) Registration in the System for Award Management (SAM) at www.sam.gov. If the Offeror is located in the

United States or its outlying areas and does not already have a CAGE code assigned, the DLA Commercial and

Government Entity (CAGE) Branch will assign a CAGE code as a part of the SAM registration process. SAM registrants located outside the United States and its outlying areas shall obtain a NCAGE code prior to registration in

SAM (see paragraph (c)(3) of this provision).

(2) The DLA Contractor and Government Entity (CAGE) Branch. If registration in SAM is not required for the subject procurement, and the Offeror does not otherwise register in SAM, an Offeror located in the United States or its outlying areas may request that a CAGE code be assigned by submitting a request at https://cage.dla.mil.

(3) The appropriate country codification bureau. Entities located outside the United States and its outlying areas may obtain an NCAGE code by contacting the Codification Bureau in the foreign entity's country if that country is a member of NATO or a sponsored nation. NCAGE codes may be obtained from the NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx if the foreign entity’s country is not a member of

NATO or a sponsored nation. Points of contact for codification bureaus, as well as additional information on obtaining NCAGE codes, are available at http://www.nato.int/structur/AC/135/main/links/contacts.htm.

(d) Additional guidance for establishing and maintaining CAGE codes is available at https://cage.dla.mil.

(e) When a CAGE code is required for the immediate owner and/or the highest-level owner by Federal Acquisition

Regulation (FAR) 52.204-17 or 52.212-3(p), the Offeror shall obtain the respective CAGE code from that entity to supply the CAGE code to the Government.

(f) Do not delay submission of the offer pending receipt of a CAGE code.

(g) If the solicitation includes FAR clause 52.204-2, Security Requirements, a subcontractor requiring access to classified information under a contract shall be identified with a CAGE code on the DD Form 254. The Contractor https://www.sam.gov/ https://www.sam.gov/ https://cage.dla.mil/ https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx http://www.nato.int/structur/AC/135/main/links/contacts.htm https://cage.dla.mil/ https://www.acquisition.gov/far/part-52#FAR_52_204_17 https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_204_2

Amendment No. 0010 shall require a subcontractor requiring access to classified information to provide its CAGE code with its name and location address or otherwise include it prominently in the proposal. Each location of subcontractor performance listed on the DD Form 254 is required to reflect a corresponding unique CAGE code for each listed location unless the work is being performed at a Government facility, in which case the agency location code shall be used. The

CAGE code must be for that name and location address. Insert the word “CAGE” before the number. The CAGE code is required prior to award.

1.11 FAR 52.211-6, BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

1.12 FAR 52.211-14, NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY

PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

Any contract awarded as a result of this solicitation will be X DX-C2 rated order; __ DO-C2 rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations

System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation.

1.13 FAR 52.214-34, SUBMISSION OF OFFERS IN THE ENGLISH LANGUAGE (APR 1991)

Offers submitted in response to this solicitation shall be in the English language. Offers received in other than

English shall be rejected.

1.14 FAR 52.214-35, SUBMISSION OF OFFERS IN U.S. CURRENCY (APR 1991)

Offers submitted in response to this solicitation shall be in terms of U.S. dollars. Offers received in other than U.S.

dollars shall be rejected.

1.15 FAR 52.215-1, INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (NOV 2021)

(a) Definitions. As used in this provision-

Discussions are negotiations that occur after establishment of the competitive range that may, at the Contracting

Officer’s discretion, result in the offeror being allowed to revise its proposal.

In writing, "writing," or "written" means any worded or numbered expression that can be read, reproduced, and later communicated, and includes electronically transmitted and stored information.

Proposal modification is a change made to a proposal before the solicitation’s closing date and time, or made in response to an amendment, or made to correct a mistake at any time before award.

Proposal revision is a change to a proposal made after the solicitation closing date, at the request of or as allowed by a Contracting Officer as the result of negotiations.

Time, if stated as a number of days, is calculated using calendar days, unless otherwise specified, and will include

Saturdays, Sundays, and legal holidays. However, if the last day falls on a Saturday, Sunday, or legal holiday, then the period shall include the next working day.

(b) Amendments to solicitations. If this solicitation is amended, all terms and conditions that are not amended remain unchanged. Offerors shall acknowledge receipt of any amendment to this solicitation by the date and time specified in the amendment(s).

(c) Submission, modification, revision, and withdrawal of proposals. (1) Unless other methods (e.g., electronic commerce or facsimile) are permitted in the solicitation, proposals and modifications to proposals shall be submitted in paper media in sealed envelopes or packages (i) addressed to the office specified in the solicitation, and (ii) showing the time and date specified for receipt, the solicitation number, and the name and address of the offeror.

Offerors using commercial carriers should ensure that the proposal is marked on the outermost wrapper with the information in paragraphs (c)(1)(i) and (c)(1)(ii) of this provision.

(2) The first page of the proposal must show–

(i) The solicitation number;

(ii) The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available);

(iii) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item;

(iv) Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror’s behalf with the Government in connection with this solicitation; and

(v) Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent’s authority, unless that evidence has been previously furnished to the issuing office.

(3) Submission, modification, revision, and withdrawal of proposals. (i) Offerors are responsible for submitting proposals, and any modifications or revisions, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is

4:30 p.m., local time, for the designated Government office on the date that proposal or revision is due.

(ii) (A) Any proposal, modification, or revision received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-

(1) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of proposals; or

(2) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or

(3) It is the only proposal received.

(B) However, a late modification of an otherwise successful proposal that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(iii) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the proposal wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(iv) If an emergency or unanticipated event interrupts normal Government processes so that proposals cannot be received at the office designated for receipt of proposals by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation, the time specified for receipt of proposals will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(v) Proposals may be withdrawn by written notice received at any time before award. Oral proposals in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile proposals, proposals may be withdrawn via facsimile received at any time before award, subject to the conditions specified in the provision at 52.215-5, Facsimile Proposals. Proposals may be withdrawn in person by an offeror or an authorized representative, if the identity of the person requesting withdrawal is established and the person signs a receipt for the proposal before award.

(4) Unless otherwise specified in the solicitation, the offeror may propose to provide any item or combination of items.

(5) Offerors shall submit proposals in response to this solicitation in English, unless otherwise permitted by the solicitation, and in U.S. dollars, unless the provision at FAR 52.225-17, Evaluation of Foreign Currency Offers, is included in the solicitation.

(6) Offerors may submit modifications to their proposals at any time before the solicitation closing date and time, and may submit modifications in response to an amendment, or to correct a mistake at any time before award.

(7) Offerors may submit revised proposals only if requested or allowed by the Contracting Officer.

(8) Proposals may be withdrawn at any time before award. Withdrawals are effective upon receipt of notice by the Contracting Officer.

(d) Offer expiration date. Proposals in response to this solicitation will be valid for the number of days specified on the solicitation cover sheet (unless a different period is proposed by the offeror).

https://www.acquisition.gov/far/part-52#FAR_52_215_5 https://www.acquisition.gov/far/part-52#FAR_52_225_17

Amendment No. 0010

(e) Restriction on disclosure and use of data. Offerors that include in their proposals data that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, shall-

(1) Mark the title page with the following legend:

This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed-in whole or in part-for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of-or in connection with-the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [insert numbers or other identification of sheets]; and

(2) Mark each sheet of data it wishes to restrict with the following legend:

Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal.

(f) Contract award. (1) The Government intends to award a contract or contracts resulting from this solicitation to the responsible offeror(s) whose proposal(s) represents the best value after evaluation in accordance with the factors and subfactors in the solicitation.

(2) The Government may reject any or all proposals if such action is in the Government’s interest.

(3) The Government may waive informalities and minor irregularities in proposals received.

(4) The Government intends to evaluate proposals and award a contract without discussions with offerors

(except clarifications as described in FAR 15.306(a)). Therefore, the offeror’s initial proposal should contain the offeror’s best terms from a cost or price and technical standpoint.