Attachment 1 (L7) - AR-MTP-24-136_Cloth_Hard Face Fleece_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

RM # AR-MTP-24-136

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Year 2024

RM Status In Process

Size Range zRM - Rolled Goods |

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

General Statements - Scope Category Description Statements

Approved Use All Departments and Agencies General Statement This document is approved for use by all Departments and Agencies of the Department of Defense (DoD).

Classification Material General Statement The fabric(s) shall be of the following types, classes and styles as specified in the contract..

Scope

9/4/2025 Page 1 of 15

Fabric# AR-MTP-24-136

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Style Colors Color Swatch (Ref)L (Ref)A (Ref)B Comments

476/498 | Coyote | 45.44 4.66 15.18

499 | Tan | 51.82 1.37 12.48

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colors

9/4/2025 Page 2 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Material Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

Material and Component Material and component construction shall conform to the requirements specified as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished material meets the physical requirements and appearance as those produced by following the sequence of operations.

Material Construction

Yarn Ply Single

Yarn Details

Fiber Percentage Yarn 1 Yarn 90 Polyester

10 Spandex

Total Composition Polyester/Spandex 90/10

Fiber Percentage Yarn 2 Yarn

Total Composition B

Fiber/Yarn/Additional Details

Woven Information

Weave Type

Warp Count

Weft Count

Shinkage Length 0

Knit Information

Knit Type Double Face

Gauge

Wales

Courses

General Information

Fabric Weight 6.10 - 7.10

UOM Oz/yd2|Ounces per square yard

Width 58

UOM in|Inches

9/4/2025 Page 3 of 15

Construction Images

Thickness (inches) 0.07 - 0.10

Appearance/Hand

UOM

Shirinkage Width 0

UOM

9/4/2025 Page 4 of 15

Additional Construction Details Image Description

A circular plaited jersey and velour knit with stretch.

Material Finish / Treatment Material Finish / Treatment Additional Details

Water Repellent

9/4/2025 Page 5 of 15

Style# AR-MTP-24-136

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Style Status

Platform

Environment

End Use

Gender

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Material General Statement General Statement Finished material shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Visual Examination General Statement General Statement The end item shall be examined for defects in color, shade, design, material, finish, construction, workmanship, marking, and the defects shall be classified in accordance with the list of defects.

Inspection Methods Yard by Yard Examination General Statement General Statement Each roll or spool in the sample shall be examined yard-by yard on the face side or face and back as deemed necessary for defects. The defects shall be defined in ASTM D3990 and only defects that are clearly noticeable at normal inspection distance (3 feet) shall be scored. Each roll or spool in the sample shall also be examined for shade variation during the yard-by-yard examination. Any roll or spool in the sample containing uneven shade or shade variation side to side, side to center, or end to end, shall be cause for rejection of entire lot represented by the sample.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Material and Component Acceptance Criteria The lot shall be unacceptable if the number of defects exceeds the Acceptable Quality Limits (AQL) or the failure of any test.

Conformance Inspection Material and Component Sampling Unless otherwise specified in subsidiary specifications, referenced documents, or procurement documents material and component sampling shall be (2) sample units for lots 800 yards of less, (3) sample units for lots 801 yards to 22,000 yards and (4) sample units for lots over 22,000 yards. For material testing, the sample unit shall be 5 continuous yards full width of the finished cloth for all physical and chemical tests.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/4/2025 Page 6 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

1 Thickness in|Inches 0.07 - 0.10 ASTM International ASTM D1777|Standard Test Method for Thickness of Textile Materials|3363|

Option 1

2 Air Permeabilty CFM|Cubic feet per minute

150 - 350 ASTM International ASTM D737|Standard Test Method for Air Permeability of Textile Fabrics|3363|

Bursting Strength lbs|Pounds Minimum 55 ASTM International ASTM D3787|Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test|3363|

First article testing

4 Dimensional Stability length %|Percentage Maximum 5.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

5 Dimensional Stability width %|Percentage Maximum 5.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

6 Water Vapor Transmission Rate (WVTR) upright, g/m^2/24h 1800 - 2400 ASTM International ASTM E96|Water Vapor Transmission Rate(WVTR) Inverted or Upright|3363|

Option B First article testing

Pilling 30 minutes Minimum 4.00 ASTM International ASTM D3512 / D3512M|Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester|3363|

First article testing

Pilling 30 minutes Minimum 4.50 ASTM International ASTM D3512 / D3512M|Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester|3363| after 1 wash cycle AATCC 135 (1), III, (Ai) First article testing

Stretch loose fit, length %|Percentage 30.0 - 90.00 ASTM International ASTM D2594 / D2594M|Standard Test

Method for Stretch Properties of Knitted Fabrics Having Low Power|3363|

5lb Load

Stretch loose fit, width %|Percentage 60.0 - 150.00 ASTM International ASTM D2594 / D2594M|Standard Test

Method for Stretch Properties of Knitted Fabrics Having Low Power|3363|

5lb Load

Material Properties and Testing

General Statements - Material Component and Physical Requirements Gs Tab Category Description Detail Statements

Material Properties and Testing

Physical Requirements - Material Properties and Testing

Material General Statement General Statement The finished material shall conforms to the requirements listed when tested as specified.

Material Properties and Testing

Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/4/2025 Page 7 of 15

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

Colorfastness - Crocking dry Minimum 4.0 American Association of Textile

Chemist and Colorists (AATCC) AATCC TM8|Colorfastness to Crocking:

Crockmeter|3363|

AATCC EP8 Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale

Colorfastness - Crocking wet Minimum 3.0 American Association of Textile

Chemist and Colorists (AATCC) AATCC TM8|Colorfastness to Crocking:

Crockmeter|3363|

AATCC EP8 Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale

3 Colorfastness - Laundering

- Staining polyester Minimum 3.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM61|Colorfastness to Laundering: Accelerated|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

Colorfastness - Light 20 AFUs Minimum 4.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM16.3|Colorfastness to Light:

Xenon-Arc|3363|

Exposed until 20 AATCC Fading Units are reached.

First article testing

5 Colorfastness - Perspiration stain, polyester Minimum 3.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

Colorfastness - Perspiration - Color Change - Acid and Alkaline

Minimum 4.00 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Weight Oz/yd2|Ounces per square yard

6.10 - 7.10 ASTM International ASTM D3776 / D3776M|Standard Test

Methods for Mass Per Unit Area (Weight) of Fabric|3363|

Option C

12 Spray rating Minimum 70 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM22|Water Repellency:

Spray|3363|

First article testing

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

1 Thermal Insulation Clo 0.20 - 0.70 ASTM International

ASTM F1868 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate part A intrinsic RCF, First article testing

2 Thermal Insulation Clo 0.50 - 0.12 ASTM International

ASTM F1868 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate part A intrinsic RCT, First article testing

9/4/2025 Page 8 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Internal Test Procedures

Material Internal Test Procedures Source Test Method Test method options Test method description

9/4/2025 Page 9 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Defects Material Fabric type Defect Type Defect Description Details Major Minor

1 Knit Type V - Knits Any hole, cut, tear, abrasion mark, snag. ¨ ¨

2 Knit Type V - Knits Edge ravels when pulled outward. ¨ ¨

3 Knit Type V - Knits Skewing ¨ ¨

4 Knit Type V - Knits Broken or missing yarn, dropped stitch, run. ¨ ¨

5 Knit Type V - Knits Any spot, stain or streak more than 1-inch in combined directions. ¨ ¨

6 Knit Type V - Knits Any mend. ¨ ¨

7 Knit Type V - Knits Stretch (stitch tension) knitting tension too high or too loose, washboards. ¨ ¨

8 Knit Type V - Knits Coarse or fine yarns resulting in noticeable difference in appearance stiffness and thickness. ¨ ¨

9 Knit Type V - Knits Twist yarn. ¨ ¨

10 Knit Type V - Knits Kinks or untrimmed ends. ¨ ¨

11 Knit Type V - Knits Knots greater than Fabric Defect Replica Scale Level D. ¨ ¨

12 Knit Type V - Knits Slubs greater than Fabric Defect Replica Scale Level F. ¨ ¨

13 Knit Type V - Knits Width not as specified within a tolerance of not less than 1/2-inch. ¨ ¨

14 Knit Type V - Knits Color not a good match to reference, barre. ¨ ¨

Knit Type V - Knits Any area of poor dye penetration, streak or shade bar that is

9-inches or less. Defective shade areas that are greater than 9-inches constitute a failure.

Defects

General Statements- Defects Category Description Detail Statement

1 Quality Material General Statement General Statement The finished material shall be examined and scored for the defects listed.

9/4/2025 Page 10 of 15

Defects Material Fabric type Defect Type Defect Description Details Major Minor

16 Knit Type V - Knits Objectionable odor. ¨ ¨

17 Knit Type V - Knits Slack or tight selvages (when applicable). ¨ ¨

18 Knit Type V - Knits Any embedded foreign matter or uncleanness. ¨ ¨

19 Knit Type V - Knits Edges rolled folded, creases, scalloped or cockled, baggy, ridgy or wavy knit. ¨ ¨

Additional defects Part NOS Defect Major Minor

9/4/2025 Page 11 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

1 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

2 Length and put-up Material General Statement General Statement For Government procurements only, unless otherwise specified in the contract, the cloth shall be furnished in continuous lengths, each not less than 50 yards, and each length shall be put-up on a roll

3 Roll Identification - Face Material General Statement General Statement The face side of the cloth shall be identified by stamping the face side with the word “FACE” at each end of the roll.

4 Roll Identification - Fiber Material General Statement General Statement Each roll shall be labeled or ticketed for fiber content in accordance with Title 16 CFR 303

9/4/2025 Page 12 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement

1 Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

2 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

3 Figures General Statement Disclaimer When inconsistencies exist between the written specification and the figures, the written specification shall govern.

4 Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

5 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

6 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

7 Non Government Publications

General Statement The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those specified in the solicitation or contract.

9/4/2025 Page 13 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Known Sources Material Product Code Vendor Material Name Comments

Known Sources Others Other Component Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

9/4/2025 Page 14 of 15

Description Cloth, Hard Face Fleece

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Knit

Defect Type Type V - Knits

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Item Details Intended End Use

Keyword listing

Comments

NSN

Size

Additional Notes

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian

9/4/2025 Page 15 of 15