Attachment 1 (L4) - AR-MTP-24-154_Lightweight Nylon Ripstop_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

RM # AR-MTP-24-154

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Year 2024

RM Status In Process

Size Range zRM - Rolled Goods |

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

General Statements - Scope Category Description Statements

Scope

9/4/2025 Page 1 of 14

Fabric# AR-MTP-24-154

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Style Colors Color Swatch (Ref)L (Ref)A (Ref)B Comments

476/498 | Coyote | 45.44 4.66 15.18

499 | Tan | 51.82 1.37 12.48

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colors

9/4/2025 Page 2 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Material Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

Material and Component Material and component construction shall conform to the requirements specified as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished material meets the physical requirements and appearance as those produced by following the sequence of operations.

Material Construction

Yarn Ply

Yarn Details

Fiber Percentage Yarn 1 Yarn 100 Nylon

Total Composition Nylon 100

Fiber Percentage Yarn 2 Yarn

Total Composition B

Fiber/Yarn/Additional Details 70 Denier

Woven Information

Weave Type Ripstop

Warp Count

Weft Count

Shinkage Length 0

Knit Information

Knit Type

Gauge

Wales

Courses

General Information

Fabric Weight 2.0 oz/yd^2

UOM

Width 0

UOM

9/4/2025 Page 3 of 14

Additional Construction Details Image Description

Material Finish / Treatment Material Finish / Treatment Additional Details

Water Repellent

Thickness (inches)

Appearance/Hand

UOM

Shirinkage Width 0

UOM

9/4/2025 Page 4 of 14

Style# AR-MTP-24-154

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Style Status

Platform

Environment

End Use

Gender

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Material General Statement General Statement Finished material shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Visual Examination General Statement General Statement The end item shall be examined for defects in color, shade, design, material, finish, construction, workmanship, marking, and the defects shall be classified in accordance with the list of defects.

Inspection Methods Yard by Yard Examination General Statement General Statement Each roll or spool in the sample shall be examined yard-by yard on the face side or face and back as deemed necessary for defects. The defects shall be defined in ASTM D3990 and only defects that are clearly noticeable at normal inspection distance (3 feet) shall be scored. Each roll or spool in the sample shall also be examined for shade variation during the yard-by-yard examination. Any roll or spool in the sample containing uneven shade or shade variation side to side, side to center, or end to end, shall be cause for rejection of entire lot represented by the sample.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Conformance Inspection Material and Component Acceptance Criteria The lot shall be unacceptable if the number of defects exceeds the Acceptable Quality Limits (AQL) or the failure of any test.

Conformance Inspection Material and Component Sampling Unless otherwise specified in subsidiary specifications, referenced documents, or procurement documents material and component sampling shall be (2) sample units for lots 800 yards of less, (3) sample units for lots 801 yards to 22,000 yards and (4) sample units for lots over 22,000 yards. For material testing, the sample unit shall be 5 continuous yards full width of the finished cloth for all physical and chemical tests.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/4/2025 Page 5 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Weight Oz/yd2|Ounces per square yard Maximum 2.0 ASTM International ASTM D3776 / D3776M|Standard Test

Methods for Mass Per Unit Area (Weight) of Fabric|3363|

Method C

Break Strength warp lbs|Pounds Minimum 110 ASTM International ASTM D5034|Standard Test Method for

Breaking Strength and Elongation of Textile Fabrics (Grab Test)|3363|

Break Strength fill lbs|Pounds Minimum 100 ASTM International ASTM D5034|Standard Test Method for

Breaking Strength and Elongation of Textile Fabrics (Grab Test)|3363|

Tear Strength warp lbs|Pounds Minimum 4.0 ASTM International ASTM D1424|Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus|3363|

Tear Strength fill lbs|Pounds Minimum 4.0 ASTM International ASTM D1424|Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus|3363|

6 Water Vapor Transmission Rate (WVTR) g/m^2/24h Minimum 900 ASTM International ASTM E96|Water Vapor Transmission Rate(WVTR) Inverted or Upright|3363|

Procedure B First article testing

Water Vapor Transmission Rate (WVTR) g/m^2/24h Minimum 900 ASTM International ASTM E96|Water Vapor Transmission Rate(WVTR) Inverted or Upright|3363|

Procedure B after 3 washes with wash conditions per AATCC 135 (1), III, (Ai) First article testing

8 Air Permeabilty CFM|Cubic feet per minute

Minimum 30 ASTM International ASTM D737|Standard Test Method for Air Permeability of Textile Fabrics|3363|

Air Permeabilty CFM|Cubic feet per minute Minimum 20 ASTM International ASTM D737|Standard Test Method for Air

Permeability of Textile Fabrics|3363| Wash conditions per AATCC 135 (1), III, (Ai) First article testing

10 Spray rating Minimum 100, 100, 90 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM22|Water Repellency:

Spray|3363|

Material Properties and Testing

General Statements - Material Component and Physical Requirements Gs Tab Category Description Detail Statements

Material Properties and Testing

Physical Requirements - Material Properties and Testing

Material General Statement General Statement The finished material shall conforms to the requirements listed when tested as specified.

Material Properties and Testing

Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/4/2025 Page 6 of 14

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

Colorfastness - Crocking wet Minimum 3.5 American Association of Textile

Chemist and Colorists (AATCC) AATCC TM8|Colorfastness to Crocking:

Crockmeter|3363|

AATCC EP8 Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale

Colorfastness - Crocking dry Minimum 3.5 American Association of Textile

Chemist and Colorists (AATCC) AATCC TM8|Colorfastness to Crocking:

Crockmeter|3363|

AATCC EP8 Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale

3 Colorfastness - Laundering

- Color Change

Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM61|Colorfastness to Laundering: Accelerated|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

4 Colorfastness - Laundering

- Staining

Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM61|Colorfastness to Laundering: Accelerated|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

Colorfastness - Perspiration - Color Change - Acid and Alkaline

Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

Colorfastness - Perspiration - Staining - Acid and Alkaline

Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

Colorfastness - Light after 40 AFUs Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM16.1|Colorfastness to Light:

Outdoor|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

First article testing

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

11 Spray rating after 5 washes Minimum 100, 90, 90 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM22|Water Repellency:

Spray|3363|

AATCC 135 (1), III, (Ai) First article testing

12 Dynamic Absorption %|Percentage Maximum 8 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM70|Water Repellency-Tumble Jar Dynamic Absorption|3363|

First article testing

13 Drying Time after wash 3 min|Minutes Maximum 10 Moisture Management Technical Supplement

MM TS 07|Drying Time |3363| First article testing

14 Dimensional Stability warp %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

15 Dimensional Stability fill %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

Abrasion Resistance cycles to first hole Cy|Cycles Minimum 1500 ASTM International ASTM D3884|Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)|3363|

CS-10 wheel, 250 gram weight First article testing

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

1 Emissivity metalized side up, initial Maximum 0.35 ASTM International

ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

First article testing

2 Emissivity metalized side up, after 15 minutes of steam Maximum 0.35 ASTM International

ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

First article testing

3 Emissivity metalized side up, after 1 wash Maximum 0.35 ASTM International

ASTM C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

9/4/2025 Page 7 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Internal Test Procedures

Material Internal Test Procedures Source Test Method Test method options Test method description

9/4/2025 Page 8 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Defects Material Fabric type Defect Type Defect Description Details Major Minor

1 Woven Type I - Solid colors and printed fabrics Any hole, cut, tear, abrasion mark. ¨ ¨

2 Woven Type I - Solid colors and printed fabrics Edge ravels when pulled outward. ¨ ¨

3 Woven Type I - Solid colors and printed fabrics Broken or missing yarn. ¨ ¨

4 Woven Type I - Solid colors and printed fabrics Any spot, stain or streak more than 1-inch in combined directions. ¨ ¨

5 Woven Type I - Solid colors and printed fabrics Knots greater than Fabric Defect Replica Scale Level C for dress uniforms and D for combat uniforms. ¨ ¨

6 Woven Type I - Solid colors and printed fabrics Slubs greater than Fabric Defect Replica Scale Level E for dress uniforms and F for combat uniforms. ¨ ¨

7 Woven Type I - Solid colors and printed fabrics Color not a good match to reference. ¨ ¨

Woven Type I - Solid colors and printed fabrics Any area of poor dye penetration, streak or shade bar that is

9-inches or less. Defective shade areas that are greater than 9-inches constitute a failure (when applicable).

9 Woven Type I - Solid colors and printed fabrics Width not as specified within a tolerance of less than 1/2-inch. ¨ ¨

10 Woven Type I - Solid colors and printed fabrics Objectionable odor. ¨ ¨

11 Woven Type I - Solid colors and printed fabrics Slack or tight selvages. ¨ ¨

12 Woven Type I - Solid colors and printed fabrics Any embedded foreign matter or uncleanness. ¨ ¨

13 Woven Type I - Solid colors and printed fabrics Edges rolled folded, creases, scalloped or corded, baggy, ridgy or wavy cloth. ¨ ¨

14 Woven Type I - Solid colors and printed fabrics Tackiness (sticky to touch). ¨ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality Material General Statement General Statement The finished material shall be examined and scored for the defects listed.

Additional defects 9/4/2025 Page 9 of 14

Part NOS Defect Major Minor

9/4/2025 Page 10 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

1 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

2 Length and put-up Material General Statement General Statement For Government procurements only, unless otherwise specified in the contract, the cloth shall be furnished in continuous lengths, each not less than 50 yards, and each length shall be put-up on a roll

3 Roll Identification - Face Material General Statement General Statement he face side of the cloth shall be identified by stamping the face side with the word “FACE” at each end of the roll.

4 Roll Identification - Fiber Material General Statement General Statement Each roll shall be labeled or ticketed for fiber content in accordance with Title 16 CFR 303

5 Width Material General Statement General Statement For Government procurements only, unless otherwise specified, the width of the finished cloth shall be as specified and shall be the minimum acceptable width exclusive of the selvage

9/4/2025 Page 11 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

2 Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

3 Figures General Statement Disclaimer When inconsistencies exist between the written specification and the figures, the written specification shall govern.

4 Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

5 Government specifications, standards, and handbooks

ASSIST Document Source Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch

6 Non Government Publications

General Statement The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those specified in the solicitation or contract.

7 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

8 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

9 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

Other Government documents, drawings and publications

9/4/2025 Page 12 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Known Sources Material Product Code Vendor Material Name Comments

Known Sources Others Other Component Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

9/4/2025 Page 13 of 14

Description Lightweight Nylon Ripstop

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Item Details Intended End Use

Keyword listing

Comments

NSN

Size

Additional Notes

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian

9/4/2025 Page 14 of 14