Attachment 1 (L6) - AR-MTP-25-207_Three-layer Knit Laminate_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

RM # AR-MTP-25-207

Description Three-layer Knit Laminate

MIL/CID Number N/A

Year 2025

RM Status In Process

Size Range zRM - Rolled Goods |

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

General Statements - Scope Category Description Statements

Classification Material General Statement The fabric(s) shall be of the following types, classes and styles as specified in the contract..

Scope

9/5/2025 Page 1 of 16

Fabric# AR-MTP-25-207

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Style Colors Color Swatch (Ref)L (Ref)A (Ref)B Comments

499 | Tan | 51.82 1.37 12.48

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colors

9/5/2025 Page 2 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Material Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

Material and Component Material and component construction shall conform to the requirements specified as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished material meets the physical requirements and appearance as those produced by following the sequence of operations.

Construction Workmanship Material General Statement General Statement The finished material shall be uniform, and the occurrence of defects, shall not exceed the established Acceptance Quality Limits (AQL) in the contract and shall not adversely affect the serviceability, appearance, and uniformity of the product.

Material Construction

Yarn Ply

Yarn Details

Fiber Percentage Yarn 1 Yarn

Total Composition

Fiber Percentage Yarn 2 Yarn

Total Composition B

Fiber/Yarn/Additional Details Three-layer Knit Laminate

Woven Information

Weave Type

Warp Count

Knit Information

Knit Type

Gauge

General Information

Fabric Weight 4.0 +/- 0.4

UOM Oz/yd2|Ounces per square yard

9/5/2025 Page 3 of 16

Additional Construction Details Image Description

Width 0

UOM

Thickness (inches)

Appearance/Hand

Weft Count

Shinkage Length 0

UOM

Shirinkage Width 0

UOM

Wales

Courses

9/5/2025 Page 4 of 16

Style# AR-MTP-25-207

Description Three-layer Knit Laminate

MIL/CID Number N/A

Style Status

Platform

Environment

End Use

Gender

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Inspection Conditions General Statement General Statement Unless otherwise specified in the contract inspections shall be performed in accordance with the test conditions specified in applicable test method documents and as specified by the inspection methods.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Material and Component Acceptance Criteria The lot shall be unacceptable if the number of defects exceeds the Acceptable Quality Limits (AQL) or the failure of any test.

Conformance Inspection Material and Component Sampling Unless otherwise specified in subsidiary specifications, referenced documents, or procurement documents material and component sampling shall be (2) sample units for lots 800 yards of less, (3) sample units for lots 801 yards to 22,000 yards and (4) sample units for lots over 22,000 yards. For material testing, the sample unit shall be 5 continuous yards full width of the finished cloth for all physical and chemical tests.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/5/2025 Page 5 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Weight Oz/yd2|Ounces per square yard

4.0 +/- 0.4 ASTM International ASTM D3776 / D3776M|Standard Test

Methods for Mass Per Unit Area (Weight) of Fabric|3363|

Option C

Hydrostatic Pressure PSI - pounds per square inch

Minimum 220 ASTM International ASTM D751 |Sttandard Test Method for Coated Fabrics|3363|

To Burst. ASTM D-751, Hydrostatic Resistance, Procedure A (Pressure Application by Mullen Type Hydrostatic Tester), Procedure 1 with water pressure applied to the face side of the test specimens.

After diethytoluamide. Five specimens shall be laid flat, face side up, on a glass plate 4 by 4 inches by 1/4 inch thick. Three drops of diethyltoluamide containing 75% diethyltoluamide and 25% ethanol shall be applied to the center of each specimen. A glass plate of the same dimensions shall be placed on the specimen (or specimen area) and a pressure of 0.25 pounds per square inch of glass plate contact area be applied to the assembly. After 16 hours, the specimens shall be removed from between the glass plates and tested immediately for hydrostatic resistance.

Material Properties and Testing

General Statements - Material Component and Physical Requirements Gs Tab Category Description Detail Statements

Material Properties and Testing

Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing

Physical Requirements - Material Properties and Testing

Material General Statement General Statement The finished material shall conforms to the requirements listed when tested as specified.

9/5/2025 Page 6 of 16

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Hydrostatic Pressure PSI - pounds per square inch

Minimum 120 ASTM International ASTM D751 |Sttandard Test Method for Coated Fabrics|3363|

To Burst. ASTM D-751, Hydrostatic Resistance, Procedure A (Pressure Application by Mullen Type Hydrostatic Tester), Procedure 1 with water pressure applied to the face side of the test specimens.

After diethytoluamide. Five specimens shall be laid flat, face side up, on a glass plate 4 by 4 inches by 1/4 inch thick. Three drops of diethyltoluamide containing 75% diethyltoluamide and 25% ethanol shall be applied to the center of each specimen. A glass plate of the same dimensions shall be placed on the specimen (or specimen area) and a pressure of 0.25 pounds per square inch of glass plate contact area be applied to the assembly. After 16 hours, the specimens shall be removed from between the glass plates and tested immediately for hydrostatic resistance.

First article testing

Toxicity The finished cloth shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal ITP6|Toxicity|3363| First article testing

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

9/5/2025 Page 7 of 16

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

1 Water Permeability Initial No Leakage ASTM International ASTM D751 | Standard Test Method for Coated Fabrics | 3363 |

Water permeability. ASTM D-751, Hydrostatic Resistance, Procedure B, Procedure 2 with a fixed hydrostatic head of 1 psi applied to the face side of the test specimen for 10 minutes. Five specimens shall be tested. Leakage is defined as any visual appearance of one (1) or more areas where weeping, wicking, or a droplet of water appears within the 4-1/2 inch diameter test area. In case of the weeping or wicking type failure, use blotting paper to confirm wetness or leakage. The test may be performed on any device, which tests the equivalent specimen area at the equivalent pressure. a.

Water permeability after Flex at 70F and -40F. One warp and one fill specimen, 8 inch by 12 inch area, shall be cut from the sample unit with the 8-inch dimension in the indicated direction (warp or filling, as applicable).

The specimen shall be conditioned and flexed as specified in ASTM F-392, except that the specimen shall not be aged, the short edges shall not be heat sealed or otherwise joined, and the specimen shall be flexed for 1500 full flex cycles. Two six (6) inch by eight (8) inch specimens shall be cut from the 8-inch by 12-inch flexed specimen and tested for water permeability as described above.

2 Water Permeability After synthetic perspiration No Leakage ASTM International ASTM D751 | Standard Test Method for Coated Fabrics | 3363 |

Water permeability. ASTM D-751, Hydrostatic Resistance, Procedure B, Procedure 2 with a fixed hydrostatic head of 1 psi applied to the face side of the test specimen for 10 minutes. Five specimens shall be tested. Leakage is defined as any visual appearance of one (1) or more areas where weeping, wicking, or a droplet of water appears within the 4-1/2 inch diameter test area. In case of the weeping or wicking type failure, use blotting paper to confirm wetness or leakage. The test may be performed on any device, which tests the equivalent specimen area at the equivalent pressure. a.

Water permeability after Flex at 70F and -40F. One warp and one fill specimen, 8 inch by 12 inch area, shall be cut from the sample unit with the 8-inch dimension in the indicated direction (warp or filling, as applicable).

The specimen shall be conditioned and flexed as specified in ASTM F-392, except that the specimen shall not be aged, the short edges shall not be heat sealed or otherwise joined, and the specimen shall be flexed for 1500 full flex cycles. Two six (6) inch by eight (8) inch specimens shall be cut from the 8-inch by 12-inch flexed specimen and tested for water permeability as described above.

9/5/2025 Page 8 of 16

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

3 Puncture Propagation Kilograms of Force, warp Minimum 3.5 ASTM International ASTM D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

Tear resistance. ASTM D-2582 with exceptions as follows: Five warp and five filling specimens shall be tested.

Specimen size shall be 8 inches by 8 inches. Only one tear shall be made on a single specimen. The specimen shall be positioned with the face side toward the probe and with the designated yarns of the face fabric at right angles to the direction of tear. If the tear is not straight on face side of the laminate, the result shall be considered invalid and another specimen shall be tested. The thickness of the specimen shall not be measured.

4 Puncture Propagation Kilograms of Force, fill Minimum 3.5 ASTM International ASTM D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

Tear resistance. ASTM D-2582 with exceptions as follows: Five warp and five filling specimens shall be tested.

Specimen size shall be 8 inches by 8 inches. Only one tear shall be made on a single specimen. The specimen shall be positioned with the face side toward the probe and with the designated yarns of the face fabric at right angles to the direction of tear. If the tear is not straight on face side of the laminate, the result shall be considered invalid and another specimen shall be tested. The thickness of the specimen shall not be measured.

5 Moisture Vapor Transmission g/m^2/24h Minimum 6000 ISO ISO 15496

Moisture vapor transmission rate. ISO #15496, except results are reported in MVTR by using the following formula MVTR Kace = (2168*24) / (1/WVP + 1/WVPapp) Note: with MVTR in g/(m2*24h); WVP in g(Pa*m2*h)

Physical Surface Appearance Change after Laundering

No change after 5 launderings when compared to unlaundered.

NCTRF PD 04-09

Physical surface appearance. Conduct 5 home laundering and drying cycles in accordance with test method options.

Each sample, 48 inches in length by full width shall be cut in half across the width of the cloth. One half of the sample (24 inches in length) shall be laundered and the remaining half retained as the unlaundered portion for the final evaluation, as necessary. After each drying cycle, examine both sides of the cloth for changes in physical surface appearance when compared to the unlaundered sample.

Laundering procedure. Place 2.0 ± 0.2 pounds of the cloth and if needed, ballast in an automatic washing machine set on permanent press cycle, high water level and warm (100+10F - 0F) wash temperature. Place 0.5 ounce (14 grams) of 1993 AATCC Standard Reference Detergent (non-phosphate) without optical brighteners into the washer. The duration of each laundering cycle shall be 30 ± 5 minutes. After laundering, place sample and ballast in an automatic tumble dryer set on permanent press cycle, 150-160F and dry for approximately thirty (30) minutes or until dry. The laundering equipment, washer and dryer, shall be in accordance with AATCC No.135

9/5/2025 Page 9 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Internal Test Procedures

Material Internal Test Procedures Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| First article testing If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/5/2025 Page 10 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Defects Material Fabric type Defect Type Defect Description Details Major Minor

1 Multi Layer Laminated Type III - Laminated fabrics Any hole, cut, pinhole, tear, abrasion mark. ¨ ¨

2 Multi Layer Laminated Type III - Laminated fabrics Edge ravels when pulled outward. ¨ ¨

3 Multi Layer Laminated Type III - Laminated fabrics Broken or missing yarn. ¨ ¨

4 Multi Layer Laminated Type III - Laminated fabrics Any spot, stain or streak more than 1-inch in combined directions. ¨ ¨

5 Multi Layer Laminated Type III - Laminated fabrics Uneven or non-uniform lamination application. ¨ ¨

6 Multi Layer Laminated Type III - Laminated fabrics Any pit, blister, tunnel bubbles or delamination of component layers. ¨ ¨

7 Multi Layer Laminated Type III - Laminated fabrics Delamination, separation of film polymer from base cloth. ¨ ¨

Multi Layer Laminated Type III - Laminated fabrics Crease or wrinkle resulting in doubling or adhesion of surfaces that cannot be corrected by manual pressure, adhesion of surfaces against each other or any distortion of face side surface.

9 Multi Layer Laminated Type III - Laminated fabrics Color not a good match to reference. ¨ ¨

Multi Layer Laminated Type III - Laminated fabrics Any area of poor dye penetration, streak or shade bar that is

9-inches or less. Defective shade areas that are greater than 9-inches constitute a failure.

11 Multi Layer Laminated Type III - Laminated fabrics Width not as specified within a tolerance of less than 1/2-inch. ¨ ¨

12 Multi Layer Laminated Type III - Laminated fabrics Objectionable odor. ¨ ¨

13 Multi Layer Laminated Type III - Laminated fabrics Knots greater than Fabric Defect Replica Scale Level D. ¨ ¨

14 Multi Layer Laminated Type III - Laminated fabrics Slubs greater than Fabric Defect Replica Scale Level F. ¨ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality Material General Statement General Statement The finished material shall be examined and scored for the defects listed.

9/5/2025 Page 11 of 16

Defects Material Fabric type Defect Type Defect Description Details Major Minor

15 Multi Layer Laminated Type III - Laminated fabrics Any embedded foreign matter or uncleanness. ¨ ¨

16 Multi Layer Laminated Type III - Laminated fabrics Edges rolled folded, creases, scalloped or corded, baggy, ridgy or wavy cloth. ¨ ¨

Additional defects Part NOS Defect Major Minor

9/5/2025 Page 12 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

1 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

2 Length and put-up Material General Statement General Statement For Government procurements only, unless otherwise specified in the contract, the cloth shall be furnished in continuous lengths, each not less than 50 yards, and each length shall be put-up on a roll

3 Roll Identification - Face Material General Statement General Statement The face side of the cloth shall be identified by stamping the face side with the word “FACE” at each end of the roll. T

4 Roll Identification - Fiber Material General Statement General Statement Each roll shall be labeled or ticketed for fiber content in accordance with Title 16 CFR 303

5 Width Material General Statement General Statement For Government procurements only, unless otherwise specified, the width of the finished cloth shall be as specified and shall be the minimum acceptable width exclusive of the selvage

9/5/2025 Page 13 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

2 Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

3 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

4 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

Other Government documents, drawings and publications

Code of Federal Regulations (CFR) Document Source Copies of these documents are available online at https://www.ecfr.gov

Other Government documents, drawings and publications

Defense Logistics Agency (DLA) Troop Support Document Source Copies of this document are available online at https://www.dla.mil

9/5/2025 Page 14 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Known Sources Material Product Code Vendor Material Name Comments

Known Sources Others Other Component Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

9/5/2025 Page 15 of 16

Description Three-layer Knit Laminate

MIL/CID Number N/A

Fabric Status In Process

Print/Solid

Fabric Type Multi Layer Laminated

Defect Type Type III - Laminated fabrics

Year 2025

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Item Details Intended End Use

Keyword listing

Comments

NSN

Size

Additional Notes

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian

9/5/2025 Page 16 of 16