Attachment 1 (L7) - AR-ETP-25-093_ARTC Parka_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

Style# AR-ETP-25-093

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This product covers the requirements for the extreme weather insulated parka for use in extreme cold weather that is apart of All-Range Tactical Clothing

Design parka for extreme cold environment

Size & Length X Small / Short

X Small / Regular

X Small / Long

X Small / X Long

Small / Short

Small / Regular

Small / Long

Small / X Long

Medium / Short

Medium / Regular

Medium / Long

Medium / X Long

Large / Short

Large / Regular

Large / Long

Large / X Long

X Large / Short

X Large / Regular

X Large / Long

X Large / X Long

9/5/2025 Page 1 of 43

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

Size & Length XX Large / Short

XX Large / Regular

XX Large / Long

XX Large / X Long

9/5/2025 Page 2 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-24-160 Plain Weave Outer shell Outershell Woven

~5.5 yds

AR-MTP-24-162 Nylon Ripstop 40D Lining inside pocketing Woven

Nylon 100 ~5.5 yds

AR-MTP-24-136 Cloth, Hard Face Fleece Fleece Knit

Polyester/Spandex 90/10 ~0.5 yds

AR-MTP-24-161 Plain Weave Nylon 70D Reinforcement Outershell Woven

Nylon 100 ~2 yds

AR-MTP-24-156 Woven Stretch 4-way Stretch Panels and Hood brim channel Woven

Nylon/Spandex 91/9 ~1 yd

Heavyweight, Interlining Hood brim stiffener Woven

Cotton 100 A-A-59992

AR-MTP-24-135 Mesh Mesh: 2x Inside mesh pockets Knit

N/A

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

Materials and Components

9/5/2025 Page 3 of 43

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-192 Fastener, Separating, Nonreversible, Zipper, No. 5, Type III 1 34.5 inches Center Front A-A-55634 Type III Style 13

Grades and Alters, see pattern

AR-CTP-24-195 No. 5, Type I, Style 4 - Continuous Element 2 22.75 inches Sides A-A-55634 Type I Style 4

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 2 8.5 inches Front Pocket A-A-55634 Type I Style 7

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 2 9.5 inches Front Inside Pass Through Pocket A-A-55634 Type I Style 7

AR-CTP-25-264 Webbing, Zipper Thong 4 11.5 inches Sides and Center Front A-A-55634

Finishes at 4.5 inches. Sear ends to prevent unravelling.

AR-CTP-25-264 Webbing, Zipper Thong 2 9 inches Pockets A-A-55634

Finishes at 3 inches. Sear ends to prevent unravelling.

AR-CTP-24-204 Rubber Tubing, 1/4" 4 3 inches Center Front Zipper Pulls (2) Side Seam Zipper Pull (2)

AR-CTP-24-204 Rubber Tubing, 1/4" 2 2 inches Front Pocket Zipper Pulls

AR-CTP-24-199 Nylon tape 3/8" width 5 3.5 inches Secure Barrel Cordlocks MIL-DTL-5038 Type III

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-25-196 Cloth, Batting, Polyester 4 ounces per square yard Non Woven

Polyester 100

AR-MTP-25-202 Knit Cuff Knit

Wool 100 MIL-C-3735 Type I Class II

9/5/2025 Page 4 of 43

AR-CTP-24-199 Nylon tape 3/8" width 2 1 inch Hood Shockcord Insert into Seam MIL-DTL-5038 Type III

AR-CTP-24-199 Nylon tape 3/8" width 2 1.5 inches Hem Shockcord Insert into Seam MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 4 3 inches Pass through Pocket Zipper, Top and Bottom MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 1 8.5 inches Hood Grommet Reinforcement MIL-DTL-5038 Type III

Grades for Center Back Hood Grommet Reinforcement

AR-CTP-24-198 Nylon tape 1" width 2 6.125 inches Front Hood Eyelet/Drawcord Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 1.5 inches Hem Drawcord Inset MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 3.5 inches Hem Eyelet Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 1.25 inches Collar Eyelet Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-200 Nylon tape 1" width (Heavy) 3 3.375 inches Front Opening Tabs

A-A-55301 Type III Catch Center Front Tabs in Left

Flap Seam, at 1/2 inch seam allowance. Finished length

1.125 inches (To Folded Edge)

AR-CTP-25-279 Fold Over Elastic 1" 2 11 inches Mesh Pocket Edge

AR-CTP-24-150 Elastic Drawcord, 3/16" 1 about 36 inches Hem Hood Opening and Center Back MIL-DTL-43701 Type II

9/5/2025 Page 5 of 43

AR-CTP-24-150 Elastic Drawcord, 3/16" 2 11.5 inches Zipper pull at Pass Through Pocket MIL-DTL-43701 Type II

AR-CTP-24-205 16 AWG G16 Wire Tinted Copper 1 30 inches Hood Brim Edge Stiffener

MIL-DTL-6279

RECOMMENDED FINISH: Cut wire to length, fold in half, twist wire together uniformly leaving .25" at end to fold back for a smooth, rounded finished end

We recommend wrapping the folded with a strong, durable, low-profile tape or coating the end in wax to secure

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 5 3 inches Center Front Closure A-A-55126 Type II Class 1 Style A

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 2 2.5 inches Sleeve Tab A-A-55126 Type II Class 1 Style A

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width 1 2 inches Rank Patch A-A-55126 Class 1 Style A

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 5 3 inches Center Front Closure A-A-55126 Class 1 Style A

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 2 7 inches Sleeve Hem A-A-55126 Class 1 Style A

AR-CTP-24-208 Snaps (Male Part), No Gloss 2 Style 2 Hood Brim MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 2 Style 2 Hood Brim MIL-DTL-10884 Style 2A Finish

AR-CTP-24-209 Grommet, Size #0 3 Hood Center Back (1) Inside Front Pocket/Through Insulation (2) NASM 16491 Type III Class III

9/5/2025 Page 6 of 43

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-113 Bar Code Label/Tag Paper

AR-CTP-24-115 Identification and care label

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-210 Eyelet, Size #00 6 Drawcord exit reinforcement at Hood Drawcord Channel (2), Hem drawcord cinch (4)

NASM 20652/1B

AR-CTP-24-274 CordLoc - Barrel 5 Center Back Hood (1) Hem (2) Inside Pocket

AR-CTP-25-278 Two Component Drawcord Ends 3 Center Back Hood (1), Hood Drawcord Ends (2)

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord Tex 45 Rows of Quilting A-A-59826 Type III Class A

AR-CTP-24-131 Thread, Nylon, Tex 46-51 All Seams A-A-59826 Type I Class B

AR-CTP-24-131 Thread, Nylon, Tex 46-51 Tex 40 Quilting Stitches A-A-59826 Type I Class B

AR-CTP-24-176 Polyester Cotton-Covered Thread Tex 45 All Top Stitching A-A-50199 Type I

Artwork

Image/Sketch ProductCode Description Artwork type Comments

9/5/2025 Page 7 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Colorways Color Family Color Image/Swatch (Ref)L (Ref)A (Ref)B Comments

Camouflage | 0001 | Army OCP Print |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-24-160 Plain Weave Outer shell Outershell 0001 | Army OCP Print |

AR-MTP-24-162 Nylon Ripstop 40D Lining inside pocketing 476/498 | Coyote |

AR-MTP-24-136 Cloth, Hard Face Fleece Fleece 476/498 | Coyote |

AR-MTP-24-161 Plain Weave Nylon 70D Reinforcement Outershell 0001 | Army OCP Print |

AR-MTP-24-156 Woven Stretch 4-way Stretch Panels and Hood brim channel 0001 | Army OCP Print |

Heavyweight, Interlining Hood brim stiffener

Colors

General Statements - Colors Category Description Statements

General Statement - Colors End Item The end item(s) shall be in the following color(s) as specified in the contract.

General Statement - Colors Component - Color The color shall be specified in end item

9/5/2025 Page 8 of 43

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-192 Fastener, Separating, Nonreversible, Zipper, No. 5, Type III 499 | Tan |

AR-CTP-24-195 No. 5, Type I, Style 4 - Continuous Element 499 | Tan |

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 499 | Tan |

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 499 | Tan |

AR-CTP-25-264 Webbing, Zipper Thong 499 | Tan |

AR-CTP-25-264 Webbing, Zipper Thong 499 | Tan |

AR-CTP-24-204 Rubber Tubing, 1/4" 499 | Tan |

AR-CTP-24-204 Rubber Tubing, 1/4" 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-24-135 Mesh Mesh: 2x Inside mesh pockets 499 | Tan |

AR-MTP-25-196 Cloth, Batting, Polyester 4 ounces per square yard

AR-MTP-25-202 Knit Cuff 499 | Tan |

9/5/2025 Page 9 of 43

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-200 Nylon tape 1" width (Heavy) 499 | Tan |

AR-CTP-25-279 Fold Over Elastic 1" 499 | Tan |

AR-CTP-24-150 Elastic Drawcord, 3/16" 499 | Tan |

AR-CTP-24-150 Elastic Drawcord, 3/16" 499 | Tan |

AR-CTP-24-205 16 AWG G16 Wire Tinted Copper

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 499 | Tan |

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 499 | Tan |

9/5/2025 Page 10 of 43

Label - Colors Image/Sketch Product Code Description

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width 499 | Tan |

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 499 | Tan |

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 499 | Tan |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-209 Grommet, Size #0 499 | Tan |

AR-CTP-24-210 Eyelet, Size #00 499 | Tan |

AR-CTP-24-274 CordLoc - Barrel 499 | Tan |

AR-CTP-25-278 Two Component Drawcord Ends 499 | Tan |

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord 499 | Tan |

AR-CTP-24-131 Thread, Nylon, Tex 46-51 499 | Tan |

AR-CTP-24-131 Thread, Nylon, Tex 46-51 499 | Tan |

AR-CTP-24-176 Polyester Cotton-Covered Thread 499 | Tan |

9/5/2025 Page 11 of 43

Label - Colors Image/Sketch Product Code Description

AR-CTP-24-113 Bar Code Label/Tag

AR-CTP-24-115 Identification and care label

9/5/2025 Page 12 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

9/5/2025 Page 13 of 43

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

9/5/2025 Page 14 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_10-HOOD-BRIM HOOD BRIM - BRIM AND BRIM FACING 1 Plain Weave Outer shell (A) Shell

PD25_10-HOOD-BRIM HOOD BRIM - BRIM AND BRIM FACING 1 Plain Weave Nylon 70D (R) Reinforcement

PD25_10-UNDER-COLLAR UNDER COLLAR 1 Plain Weave Outer shell (A) Shell

PD25_10-COLLAR COLLAR 1 Plain Weave Outer shell (A) Shell

PD25_10-BACK-TOP BACK TOP 1 Plain Weave Outer shell (A) Shell

PD25_10-BACK-HEM-FACING CENTER BACK BOTTOM 1 Plain Weave Outer shell (A) Shell

PD25_10-FRONT-HEM-FACING FRONT HEM FACING 2 Plain Weave Outer shell (A) Shell

PD25_10-FRONT FRONT 2 Plain Weave Outer shell (A) Shell

PD25_10-SIDE-HOOD SIDE HOOD 2 Plain Weave Outer shell (A) Shell

PD25_10-TOP-CB-HOOD TOP CENTER BACK HOOD 1 Plain Weave Outer shell (A) Shell

PD25_10-OUTER-LEFT-FLAP OUTER LEFT FLAP 1 Plain Weave Outer shell (A) Shell

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

9/5/2025 Page 15 of 43

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_10-INNER-LEFT-FLAP INNER LEFT FLAP 1 Plain Weave Outer shell (A) Shell

PD25_10-RIGHT-CF-FLAP RIGHT CENTER FRONT FLAP 1 Plain Weave Outer shell (A) Shell

PD25_10-BOTTOM-CB-HOOD BOTTOM CENTER BACK HOOD 1 Plain Weave Outer shell (A) Shell

PD25_10-SLEEVE-TOP SLEEVE TOP 2 Plain Weave Outer shell (A) Shell

PD25_10-SLEEVE-BOTTOM SLEEVE BOTTOM 2 Plain Weave Nylon 70D (R) Reinforcement

PD25_10-CENTER-BACK-BTM CENTER BACK BOTTOM 1 Plain Weave Nylon 70D (R) Reinforcement

PD25_10-CUFF-TABS CUFF TABS 4 Plain Weave Nylon 70D (R) Reinforcement

PD25_10-SIDE-GUSSET SIDE GUSSET 2 Woven Stretch 4-way (S) Stretch

PD25_10-ZIP-GARAGE ZIP GARAGE 2 Woven Stretch 4-way (S) Stretch

PD25_10-FRONT-HOOD-CHANNEL FRONT HOOD CHANNEL 1 Woven Stretch 4-way (S) Stretch

PD25_10-HOOD-DRAWCORD-CHAN

NEL HOOD DRAWCORD CHANNEL 1 Woven Stretch 4-way (S) Stretch

PD25_10-HOOD-STIFFENER HOOD STIFFENER 1 (I) Interlining

PD25_10-COLLAR-FLEECE COLLAR FLEECE 1 Cloth, Hard Face Fleece (F) Fleece

PD25_10-RIGHT-CF-FLEECE RIGHT CENTER FRONT FLAP FLEECE 1 Cloth, Hard Face Fleece (F) Fleece

PD25_10-CF-EXT-INTERLINING CENTER FRONT EXTENSION INTERLINING 2 (I) Interlining

PD25_10-CF-EXTENSION CENTER FRONT EXTENSION 4 Plain Weave Outer shell (A) Shell

PD25_10-RIGHT-CF-FLAP-INT RIGHT CENTER FRONT FLAP INTERLINING 1 (I) Interlining

PD25_10-LEFT-CF-FLAP-INT LEFT FLAP INTERLINING 1 (I) Interlining

PD25_10-CUFF-TAB-INT CUFF TAB INTERLINING 2 (I) Interlining

PD25_10-SIDE-HOOD-INSULATION SIDE HOOD INSULATION 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-SIDE-HOOD-INSULATION SIDE HOOD INSULATION 2 Nylon Ripstop 40D (L) Lining

PD25_10-CB-HOOD-INSULATION CENTER BACK HOOD INSULATION 1 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-CB-HOOD-INSULATION CENTER BACK HOOD INSULATION 1 Nylon Ripstop 40D (L) Lining

PD25_10-BACK-BTM-INSULATION BACK BOTTOM INSULATION 1 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-BACK-BTM-INSULATION BACK BOTTOM INSULATION 1 Nylon Ripstop 40D (L) Lining

9/5/2025 Page 16 of 43

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_10-POCKET-BAG-FCG POCKET BAG FACING 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-POCKET-BAG-FCG POCKET BAG FACING 2 Nylon Ripstop 40D (L) Lining

PD25_10-POCKET-BAG POCKET BAG 2 Nylon Ripstop 40D (L) Lining

PD25_10-SLEEVE-INSULATION SLEEVE INSULATION 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-SLEEVE-INSULATION SLEEVE INSULATION 2 Nylon Ripstop 40D (L) Lining

PD25_10-FRONT-INSULATION FRONT INSULATION 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-FRONT-INSULATION FRONT INSULATION 2 Nylon Ripstop 40D (L) Lining

PD25_10-CUFF-EXTENSION CUFF EXTENSION 4 Nylon Ripstop 40D (L) Lining

PD25_10-FRONT-MESH FRONT MESH 2 Mesh (M) Mesh

PD25_10-BACK-TOP-INSULATION BACK TOP INSULATION 1 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_10-BACK-TOP-INSULATION BACK TOP INSULATION 1 Nylon Ripstop 40D (L) Lining

Pattern Support Details Pattern Name Piece Part Cut Part Comments Image

PD25_10-HEM-EYE-RNF-T

MP

HEM EYELET

REINFORCEMENT

0 (T) TEMPLATE

PD25_10-FRT-HD-EYE-RNF

-TMP

FRONT HOOD EYELET

REINFORCEMENT

0 (T) TEMPLATE

PD25_10-HEM-DWC-INSET

-RNF-TMP

HEM DRAWCORD INSET

REINFORCEMENT

0 (T) TEMPLATE

PD25_10-COLLAR-RNF-TM

P

COLLAR REINFORCEMENT 0 (T) TEMPLATE

PD25_10-HD-GMT-RNF-TM

P

HOOD GROMMET

REINFORCEMENT

0 (T) TEMPLATE

PD25_10-POCKET-FIX-TMP POCKET FIX 0 (T) TEMPLATE

9/5/2025 Page 17 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

9/5/2025 Page 18 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction Images

9/5/2025 Page 19 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Front details

Back view

9/5/2025 Page 20 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Inside view

Construction Details Construction Area / Location Description Requirement Image Number

Preparation 1) Cut fabric, cording, tape, and webbing according to the Cutters Must and Bill of Materials (BOM).

2) Ensure cord ends, tape, and webbing are seared with a hot knife or cutter to ensure unraveling is prevented. Round edges that are pointed and sharp.

3) Add markings to all pattern pieces according to the patterns and templates, which include snaps, grommets, webbing locations, pocket locations, hook and loop, zipper flap, and under zipper guards.

4) Sew down interlining to under collar, hook tab, cuff tabs, sleeve extension, underarm zipper guard.

9/5/2025 Page 21 of 43

Construction Details Construction Area / Location Description Requirement Image Number

In Process Step SMALL COMPONENTS -

PART I

1) Sew zipper flap: Fold webbing in half and sew box X. Sew hook pieces on the inner zipper flap as indicated on the pattern. Sandwich interlining with (2) zipper flap self pieces while including pull tap within the seam. Flip zipper flap right side out and top stitch 1/8" from edge.

2) Sew zipper extension on the zipper tape by sandwiching the tape for a clean finish.

3) Sew under flap: sew the flaps right sides together with interlining. Flip right sides out and top stitch 1/8" from edge.

Sew loop pieces as indicated on the patterns.

4) Baste the left zipper extension onto

In Process Step SMALL COMPONENTS -

PART II

5) Front pocket: Mark the slit pockets placements for setting zippers per pattern on front shell. Mark the inside pass-through zipper placements for setting zippers per pattern on front pocket bags.

6) Sew side pleat: sew zipper onto the side seams of the pleat. Sew zipper garage on the top.

7) Sew sleeve tab right side together with interlining, flip right sides out, then top stitch 1/8" from the edge and sew hook tape.

8) Construct the front mesh pockets:

Sew elastic binding on top of mesh

In Process Step SMALL COMPONENTS -

PART II

HOOD:

1) Cut pieces and check notches are cut (we recommend cutting all quilted piece parts together by layerning the liner face down on cutting table, followed by loft of insulation with scrim on top)

2) Create markings on cut pieces for all placement indication lines notated as per patterns (quilt stitch marks, component placement marks, etc.)

3) Prepare all quilted piece parts: (2) "front", (1) "back", (2) "sleeve", and (2) "front-pkt", stacking fabric layers as follows: (torso and sleeve) stitch with liner side face up/scrim side face down.

(Pocket) liner side face up/fleece side face down. Secure insulation/fleece along the tacking marks according to the pattern using 5-7 SPI (we recommend basting all raw edges of lining, insulation and scrim together for ease of construction).

9/5/2025 Page 22 of 43

In Process Step SMALL COMPONENTS -

PART III

HOOD continue:

4) Cut wire to length, fold in half, twist wire together uniformally leaving .25" at end to fold back for a smooth, rounded finished end (we recommend wrapping the folded with a strong, durable, low-profile tape or coating the end in wax to secure)

5) Feed (Type III, 5038, 1/4") through the open areas of the barrel lock and secure with a tack stitch. Add barrel locks to hood drawcord.

Preparation QUILTING INSULATION 1) Sew down under collar to collar fleece using the pattern according to the pattern. Sew collar together at top seam then edge stitch with seam allowance towards the under collar.

2) Quilting all the insulation to lining for the (1) hood, (2) front, (1) back, (2) sleeve; follow the designs in the pattern ***NOTE: Sew insulation on the bottom with lining on top. Baste with large stitches around the quilted pieces to keep it all together.

In Process Step HOOD - PART I 1) Sew hood stiffener: sew stiffener to lining following the stitch pattern according to the pattern.

2) Prep wire by folding in half, twisting, trim excess length, fold ends inward to avoid poking. Sew brim pieces together and finish corners. Flip brim right side out and top stitch 1/8" from edge on the 3 sides. Insert the wire to the brim edge. Sew close to the wire to create a channel but still avoiding sewing over the wire ***NOTE: Make sure to keep wire in place that it is even, it can tend to shift while sewing channel.

3) Sew hem of the face drawcord by folding over twice and top stitch. Add barrel lock keepers to the ends. Insert the cord fold channel in half, and baste the channel together.

4) Baste face drawcord channel into underside of brim.

9/5/2025 Page 23 of 43

In Process Step HOOD - PART II 5) Sew down hood grommet reinforcement in to bottom back hood piece. Set grommet through all layers, and sew the cord lock keeper directly above the grommet.

6) Top center back hood fold seam allowance to match marking and top stitch down. Then align the top and bottom center back hood pieces according to the markings on the pattern. Sew down to attach top and bottom center back pieces.

7) Join the side hood pieces onto the CB hood. Push seam allowance towards the center back and double needle top stitch

8) Join top of the side hood pieces together, which create a CF seam.

Seam allowance towards wearer's left and double needle top stitch.

9) Sew the newly created "fish eye" dart.

In Process Step HOOD - PART III 10) Sew the lining with insulation sides to the lining with insulation center back.

Then sew the top of the side hood pieces together at CF. Then sew "fisheye" dart.

11) Sew the reinforcement tape channel onto the lining with insulation according to the markings on the pattern. Set eyelet through all layer.

Baste the reinforcement tape channel on the brim side.

12) Sew horizontal drawcord hood channel onto the insulation/lining layer.

Tack down the drawcord at the end of the channels leaving 1/2" tail. Thread drawcord through grommet and into barrel lock.

13) Then sew the brim, shell, and lining all together in one seam. Then flip right side out.

14) Set snaps.

15) Set cord ends.

9/5/2025 Page 24 of 43

Front PART I 1) Sew front pocket bags to the front panels

2) Sew front slit zipper through front panels and front pocket bags at location indicated on pattern

3) Sew pass-through zipper on inside front pocket bags at location indicated on pattern

4) Sew the mesh pockets on the front lining & insulation with 1/4" double needle stitch.

5) Sew the pocket flap, top and bottom front pieces (self and lining with insulation) for a clean seam. Flip right

Front PART II 6) Line up front mesh inner pocket and baste stitch the side seam and sleeve armhole.

*** NOTE: leave CF open Sew front slit zippers, pass-through zippers and front pockets.

Sleeves 1) Sew sleeve bottom darts, seam allowance for the (2) darts point towards each other and single needle top stitch. Sew the cuff loop on the self lower sleeve at location. Attach cuff tab to designated location.

2) Join sleeve top and bottom together, push seam allowance towards the top and double needle top stitch.

3) Sew knit cuff towards.

Seam JOINING - SLEEVE TO

BODY

1) Attach the sleeve self to front back self pieces, which joins the body pieces and join sleeve inseam according to pattern.

2) Attach the sleeve liner/insulation piece to the front and back liner/insulation pieces, which joins the body and join sleeve inseam according to pattern.

3) Attach cuff extension to bottom of the sleeve insert the cuff toward the up right stitch bring down to bottom and top stitch.

Seam JOINING - HOOD TO BODY 1) Align with front welt zipper pocket to insulation welt pocket top stitch around to join. make sure mesh is not catch with top stitch, line up with mesh tack in place.

2) Sew the outer collar, hood piece, self front piece sandwich together

3) Sew under collar to liner/insulation boby

4) Join the two pieces together sewn outer collar/hood/front with sewn under collar/insulation( keep in place)

9/5/2025 Page 25 of 43

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

At all the join seams

301 SSa-1 9-11

Parka zipper guard opening around the hood and cuff tabs

301 SSae-1 9-11 SSae

Hood joint seam jacket front & back joint seam jacket raglan & joint sleeve seam

LSq-3 9-11

Construction Details Construction Area / Location Description Requirement Image Number

Seam ZIPPER 1) On the wearer's right, sew the under zipper flap and zipper in between the liner/insulation front and the self front piece.

2) On the wearer's left side, sew the zipper flap and the zipper in between the liner/insulation front and the self front piece.

3) Sew the side seam inner pleat zipper in between the front liner/insulation and the self front piece and bar-tack.

4) Sew the side seam inner pleat zipper in between the liner/insulation and the self piece.

Hem HEM AND CLOSURE 2) Align reinforcement onto the grommet location as indicated on the pattern, and then set grommet through all layers

3) Sew the facings on the shelf hem.

Make sure to sew the drawcord at CF.

Edge stitch the facing with the seam allowance. Turn under seam allowance

In Process Step FINISHING 1) Set snaps and bar-tacks on in joins indicated location

2) zipper pulls

Construction Details Secondary Construction Area / Location Description Requirement Image

9/5/2025 Page 26 of 43

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

JACKET FRONT ZIPPER 3/8 36 stitches/tack 4 ¨ þ

JACKET CF AT HEM 7/8 29 stitches/tack 2 ¨ þ

JACKET HOOD 5/8 29 stitches/tack 2 þ ¨

JACKET BASE OF UNDERARM ZIPPER

GARAGE

1/2 36 stitches/tack 2 þ ¨

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

Quilting insulation, collar, Jacket, insulation with lining

301 SSv-1 7-9 stitches per inch

Hem jacket sewing the facing

301 SSaw-2 9-11

Jacket inner mesh pocket

401 BSa-1 9-11

Jacket fronter zipper

301 SSq-1 9-11

Channel hem for draw cord on hood

301 EFa-1 and EFa-2

EFa-1 9-11

Hook & loop front hood reinforcement channel

301 LSbj-1 9-11 Gauge: 1/8(± 1/32)-inch from edge

Side Hood Inner Channel

301 LSbj-2 9-11

Darts, front center zipper guard jacket back pleat and pocket pleat

301 Osf-2 Gauge: 1/8(± 1/32)-inch from edge

9/5/2025 Page 27 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

9/5/2025 Page 28 of 43

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ L7S01 HOOD HEIGHT (Short) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/2 1/2 3/8 3/8 0 3/8 0 0

¨ L7S02 HOOD HEIGHT (Regular) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/2 1/2 3/8 3/8 0 3/8 3/8 3/8

¨ L7S03 HOOD HEIGHT (Long) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/2 1/2 0 3/8 0 3/8 3/8 3/8

¨ L7S04 HOOD HEIGHT (XLong) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 18 1/4 1/2 0 0 0 0 0 3/8

¨ L7T05 HOOD WIDTH AT WIDEST POINT - ON HALF

(Short)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 13 1/2 1/2 1/2 0 1/2 0 0

¨ L7T06 HOOD WIDTH AT WIDEST POINT - ON HALF

(Regular)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 13 1/2 1/2 1/2 0 1/2 0 1/2

¨ L7T07 HOOD WIDTH AT WIDEST POINT - ON HALF

(Long)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 13 1/2 0 1/2 0 1/2 0 1/2

¨ L7T08 HOOD WIDTH AT WIDEST POINT - ON HALF

(XLong)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 13 1/2 1/2 0 0 0 0 0 1/2

¨ L7T09 TOP OF COLLAR - ON HALF (Short)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

13 1/2 3/4 3/4 0 3/4 0 0

¨ L7T10 TOP OF COLLAR - ON HALF (Regular)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

13 1/2 3/4 3/4 0 3/4 3/4 3/4

¨ L7T11 TOP OF COLLAR - ON HALF (Long)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

13 1/2 0 3/4 0 3/4 3/4 3/4

¨ L7T12 TOP OF COLLAR - ON HALF (XLong)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

14 1/2 1/2 0 0 0 0 0 3/4

¨ L3S15 CENTER FRONT LENGTH (Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 27 3/4 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S14 CENTER FRONT LENGTH (Regular) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 26 3/4 1/2 1/2 1/2 0 1/2 1/2 1/2

Department of Defense Clothing and Textiles

Style# AR-ETP-25-093

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Grade Rule Size Range Alpha Sizes XXS-4XL | Fit Type Unisex

Selected Sizes X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

9/5/2025 Page 29 of 43

Small Small Mediu m Large X

Large

XX

Large

¨ L3S13 CENTER FRONT LENGTH (Short) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 25 3/4 1/2 1/2 1/2 0 1/2 0 0

¨ L3S01 Collar Height at Center Front Measurement taken at center front from collar seam to top of bendback. 7 1/4 0 0 0 0 0 0

¨ L3S05 Collar Height at Center Back Measurement taken at center back from collar seam to top of bendback. 4 3/4 1/4 0 0 0 0 0 0

¨ L7T21 BOTTOM OPENING - ON HALF (Short)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

25 1/2 1/2 2 2 0 2 0 0

¨ L7T22 BOTTOM OPENING - ON HALF (Regular)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

25 1/2 1/2 2 2 0 2 2 0

¨ L7T23 BOTTOM OPENING - ON HALF (Long)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

25 1/2 1/2 0 2 0 2 2 2

¨ L7T24 BOTTOM OPENING - ON HALF (XLong)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

29 1/2 1/2 0 0 0 0 0 2

¨ L7T25 SIDE SEAM EXTENSION AT HEM MEASURED STRAIGHT FROM SIDE EXTENSION SEAM TO

SEAM AT HEM EDGE WITH ZIPPER OPEN 5 1/2 0 0 0 0 0 0

¨ L3S51 CENTER BACK BODY LENGTH (Short) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

33 1/2 1/2 1/2 0 1/2 0 0

¨ L3S52 CENTER BACK BODY LENGTH (Regular) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

34 1/2 1/2 1/2 0 1/2 1/2 1/2

¨ L3S53 CENTER BACK BODY LENGTH (Long) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

35 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S54 CENTER BACK BODY LENGTH (XLong) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

37 1/2 0 0 0 0 0 1/2

¨ L3S59 LONG SLEEVE LENGTH FROM SIDE NECK

(Short)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 31 1/2 1 1 0 1 0 0

¨ L3S60 LONG SLEEVE LENGTH FROM SIDE NECK

(Regular)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 32 1/2 1/2 1 1 0 1 1 1

¨ L3S61 LONG SLEEVE LENGTH FROM SIDE NECK

(Long)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 34 1/2 0 1 0 1 1 1

¨ L3S62 LONG SLEEVE LENGTH FROM SIDE NECK

(XLong)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 37 1/2 1/2 0 0 0 0 0 1

¨ L7T26 BICEP WIDTH- ON HALF - ON HALF (short)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

12 1/8 3/8 1/2 1/2 0 1/2 0 0

¨ L7T27 BICEP WIDTH- ON HALF - ON HALF (Regular)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

12 1/8 3/8 1/2 1/2 0 1/2 1 1/2

¨ L7T29 BICEP WIDTH -ON HALF - ON HALF (XLong)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

13 5/8 3/8 0 0 0 0 0 1/2

¨ L7T30 LONG SLEEVE OPENING WIDTH - ON HALF

(Short)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE AT

FINISHED SLEEVE OPENING 7 3/4 1/4 1/4 1/4 0 1/4 0 0

9/5/2025 Page 30 of 43

Small Small Mediu m Large X

Large

XX

Large

¨ L7T31 LONG SLEEVE OPENING WIDTH - ON HALF

(Regular)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE AT

FINISHED SLEEVE OPENING 7 3/4 1/4 1/4 1/4 0 1/4 1/4 1/4

¨ L7T32 LONG SLEEVE OPENING WIDTH - ON HALF

(Long)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE AT

FINISHED SLEEVE OPENING 7 3/4 1/4 0 1/4 0 1/4 1/4 1/4

¨ L7T33 LONG SLEEVE OPENING WIDTH - ON HALF

(XLong)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE AT

FINISHED SLEEVE OPENING 8 1/4 1/4 0 0 0 0 0 0

¨ L7T35 CHEST WIDTH - ON HALF (Short)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 1/2 1/2 2 2 0 2 0 0

¨ L7T36 CHEST WIDTH - ON HALF (Regular)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 1/2 1/2 2 2 0 2 2 2

¨ L7T37 CHEST WIDTH - ON HALF (Long)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 1/2 1/2 0 2 0 2 2 2

¨ L7T38 CHEST WIDTH - ON HALF (XLong)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

28 1/2 1/2 0 0 0 0 0 2

¨ L3S16 CENTER FRONT LENGTH (X Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 29 3/4 1/2 0 0 0 0 0 1/2

¨ L7T28 BICEP WIDTH -ON HALF- ON HALF (Long)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

12 1/8 3/8 0 1/2 0 1/2 1 1/2

Additional TOFM Details

Code Point Of Measure How to Measure Tol Base Size Grade

9/5/2025 Page 31 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods End Item General Statement General Statement Finished end items shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Testing End item General Statement General Statement Finished end items shall be examined and tested in accordance with the specified examinations and tests on the end item properties unless otherwise excluded, amended, or modified in this document or applicable procurement documents. End item physical tests apply to the finished end item to include all pre and post treatments, assemblies and operations.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/5/2025 Page 32 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/5/2025 Page 33 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes, warp %|Percentage Maximum 5.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 50 washes, fill %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-g uidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?pa ge=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.

9/5/2025 Page 34 of 43

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C

9/5/2025 Page 35 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/5/2025 Page 36 of 43

Description All-Range Tactical Clothing (ARTC) - Parka

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

1 Jackets Material 01 Hole, cut, tear, smash, burn, drill hole, run, needle chew, abrasion damaging the fabric, affecting appearance or serviceability þ ¨

2 Jackets Material 02 Any misweave, knot and/or slub, visible mend, missing or broken yarn ¨ þ

3 Jackets Material 03 Any weakening defect such as smash, multiple float, thin place, drop stitch or loose slub that might develop into hole " ¨ þ

4 Jackets Cutting 04 Any component part not cut in accordance with specified directional lines, twill lines and/or fabric grain not parallel between parts þ ¨

5 Jackets Components 05 Component omitted þ ¨

6 Jackets Stitching and Seaming 06 Omitted þ ¨

7 Jackets Stitching and Seaming 07 Seam and/or stitch type not as specified þ ¨

8 Jackets Bartacks 08 Omitted þ ¨

9 Jackets Bartacks 09 Loose and or tight stitch tension þ ¨

10 Jackets Bartacks 10 Placement not as specified and/or misaligned þ ¨

11 Jackets Sleeve and armholes 11 Sleeves reversed þ ¨

12 Jackets Sleeve and armholes 12 Sleeves tight, causing pleat and/or excessive puckers on front, back and/or sleeve ¨ þ

13 Jackets Hem(s) 13 Hem twisted, pleated and/or puckered þ ¨

14 Jackets Hem(s) 14 Irregular in width ¨ þ

15 Jackets Hem(s) 15 Not finished as specified þ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

9/5/2025…