Attachment 1 (L4) - AR-ETP-25-102_Insulated Liner Jacket_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

Style# AR-ETP-25-102

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This product covers the requirements for the lightweight insulated Jacket for use in extreme cold weather

Design

Insulated liner part of ARTC ensemble. Hood to be added back on.

Size & Length XX Small / X Short

XX Small / Short

XX Small / Regular

XX Small / Long

XX Small / X Long

XX Small / XX Long

XX Small / XXX Long

X Small / X Short

X Small / Short

X Small / Regular

X Small / Long

X Small / X Long

X Small / XX Long

X Small / XXX Long

Small / X Short

Small / Short

Small / Regular

Small / Long

Small / X Long

Small / XX Long

9/4/2025 Page 1 of 37

Size & Length Small / XXX Long

Medium / X Short

Medium / Short

Medium / Regular

Medium / Long

Medium / X Long

Medium / XX Long

Medium / XXX Long

Large / X Short

Large / Short

Large / Regular

Large / Long

Large / X Long

Large / XX Long

Large / XXX Long

X Large / X Short

X Large / Short

X Large / Regular

X Large / Long

X Large / X Long

X Large / XX Long

X Large / XXX Long

XX Large / X Short

XX Large / Short

XX Large / Regular

XX Large / Long

XX Large / X Long

XX Large / XX Long

XX Large / XXX Long

9/4/2025 Page 2 of 37

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

9/4/2025 Page 3 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-24-154 Lightweight Nylon Ripstop Outer shell, Zipper Guard and Hood

Lining Woven

Nylon 100 ~3.5 yards

AR-MTP-24-155 Shadow Box Dobby Ripstop Jacket Torso and Sleeve Lining Woven

Nylon 100 ~3.5 yards

AR-MTP-24-142 Cloth, Batting, Polyester 2.4 ounces per square yard Insulation - Inner Jacket and Sleeve Non Woven

Polyester 100 ~3.5 yards

2.4 osy

AR-MTP-24-136 Cloth, Hard Face Fleece

Side Stretch, Center Back Hood Panel, Hood side pieces, and Snap Cover at

CF

Knit

Polyester/Spandex 90/10 ~1.5 yards, See material composition for comments.

AR-MTP-24-143 Lightweight Non-fusible Interlining

Hood brim, Hood Flap Reinforcement, Front Pocket Opening, Front

Pocket Facing and Zipper Guard

Non Woven

~0.25 yards

2.5 osy

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 1 28.5 inches Center Front A-A-55634 Type III

Materials and Components

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

9/4/2025 Page 4 of 37

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-189 Zipper, No. 3, Type I, Style 7 2 9 inches Lower Pocket A-A-55634 Type I

AR-CTP-24-189 Zipper, No. 3, Type I, Style 7 1 7 inches Inner Chest Pocket A-A-55634 Type I

AR-CTP-24-151 Elastic binding, Tricot knit Multiple Lengths - Reference TOD for Bottom Hem Opening Finished Dimension Torso Hem and Armhole openings

4.1 osy Measurement for the binding comes from the finished measurements table

AR-CTP-24-127 Tubular Braid 11/32" 3 7 inches Zipper Pulls Center Front zipper MIL-DTL-371 Type VII Class 2

AR-CTP-24-127 Tubular Braid 11/32" 1 4 inches Center Back Hang Loop MIL-DTL-371 Type VII Class 2

AR-CTP-24-199 Nylon tape 3/8" width 3 6 inches Chest Pocket and Side Pocket zipper pull MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 3 6.25 inches Front Snap Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 6.25 inches Sleeve Thumbhole reinforcement at seams MIL-DTL-5038 Type III

AR-CTP-25-277 3/4" Elastic 2 Sleeve Hem, Thumb Loop

AR-CTP-24-208 Snaps (Male Part), No Gloss 2 Qty: 2 Snap closure at center front MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 2 Qty: 2 Snap closure at center front MIL-DTL-10884 Style 2A Finish

Use cap with short neck

9/4/2025 Page 5 of 37

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-113 Bar Code Label/Tag Paper

AR-CTP-24-115 Identification and care label

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-131 Thread, Nylon, Tex 46-51 All seaming and stitching throughout the garment, and quilting stitches A-A-59826 Type I Class B

Artwork

Image/Sketch ProductCode Description Artwork type Comments

9/4/2025 Page 6 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-24-154 Lightweight Nylon Ripstop Outer shell, Zipper Guard and Hood Lining 476/498 | Coyote |

AR-MTP-24-155 Shadow Box Dobby Ripstop Jacket Torso and Sleeve Lining 476/498 | Coyote |

AR-MTP-24-142 Cloth, Batting, Polyester 2.4 ounces per square yard Insulation - Inner Jacket and Sleeve WHT | White |

AR-MTP-24-136 Cloth, Hard Face Fleece Side Stretch, Center Back Hood Panel, Hood side pieces, and Snap Cover at

CF

476/498 | Coyote |

AR-MTP-24-143 Lightweight Non-fusible Interlining

Hood brim, Hood Flap Reinforcement, Front Pocket Opening, Front Pocket

Facing and Zipper Guard WHT | White |

Component-Colors Image/Sketch Product Code Description Colorway1

Colorways Color Family Color Image/Swatch (Ref)L (Ref)A (Ref)B Comments

Brown | 476/498 | Coyote | 45.44 4.66 15.18

Colors

General Statements - Colors Category Description Statements

General Statement - Colors End Item The end item(s) shall be in the following color(s) as specified in the contract.

General Statement - Colors Component - Color The color shall be specified in end item

9/4/2025 Page 7 of 37

Label - Colors Image/Sketch Product Code Description

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 499 | Tan |

AR-CTP-24-189 Zipper, No. 3, Type I, Style 7 499 | Tan |

AR-CTP-24-189 Zipper, No. 3, Type I, Style 7 499 | Tan |

AR-CTP-24-151 Elastic binding, Tricot knit 476/498 | Coyote |

AR-CTP-24-127 Tubular Braid 11/32" 499 | Tan |

AR-CTP-24-127 Tubular Braid 11/32" 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 476/498 | Coyote |

AR-CTP-24-198 Nylon tape 1" width 476/498 | Coyote |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-25-277 3/4" Elastic 375 | Black |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-131 Thread, Nylon, Tex 46-51 499 | Tan |

9/4/2025 Page 8 of 37

Label - Colors Image/Sketch Product Code Description

AR-CTP-24-113 Bar Code Label/Tag

AR-CTP-24-115 Identification and care label

9/4/2025 Page 9 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

9/4/2025 Page 10 of 37

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

9/4/2025 Page 11 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_05-SNAP-FLAP-FLEECE SNAP FLAP FLEECE 1 Cloth, Hard Face Fleece (F) Fleece

PD25_05-SNAP-BACKING SNAP BACKING 1 Cloth, Hard Face Fleece (F) Fleece

PD25_05-SLEEVE-FLEECE SLEEVE FLEECE 2 Cloth, Hard Face Fleece (F) Fleece

PD25_05-BODY-FLEECE BODY FLEECE 2 Cloth, Hard Face Fleece (F) Fleece

PD25_05-BACK-TOP-FLEECE-LINER BACK TOP FLEECE LINER 1 Cloth, Hard Face Fleece (F) Fleece

PD25_05-COLLAR-FLC-LNR-INS COLLAR FLEECE LINER INSULATION 1 Cloth, Batting, Polyester 2.4 ounces per square yard

(N) Insulation

PD25_05-COLLAR-FLC-LNR-INS COLLAR FLEECE LINER INSULATION 1 Cloth, Hard Face Fleece (F) Fleece

PD25_05-ZIP-GUARD-INTERLINING ZIP GUARD INTERLINING 1 Lightweight Non-fusible Interlining (I) Interlining

PD25_05-SNAP-FLAP-INT SNAP FLAP INTERLINING 1 Lightweight Non-fusible Interlining (I) Interlining

PD25_05-LOW-PKT-INT-TOP LOW POCKET INTERLINING TOP 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_05-LOW-PKT-INT-BTM LOW POCKET INTERLINING BOTTOM 2 Lightweight Non-fusible Interlining (I) Interlining

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

9/4/2025 Page 12 of 37

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_05-SLEEVE-LINER-UPPER SLEEVE LINER UPPER 2 Shadow Box Dobby Ripstop (L) Lining

PD25_05-SLEEVE-LINER-UNDER SLEEVE LINER UNDER 2 Shadow Box Dobby Ripstop (L) Lining

PD25_05-FRONT-UPPER-POCKET FRONT UPPER POCKET 1 Shadow Box Dobby Ripstop (L) Lining

PD25_05-BTM-BACK-LNR-INS BOTTOM BACK LINER INSULATION 1 Shadow Box Dobby Ripstop (L) Lining

PD25_05-BTM-BACK-LNR-INS BOTTOM BACK LINER INSULATION 1 Cloth, Batting, Polyester 2.4 ounces per square yard

(N) Insulation

PD25-05-FRONT-INS-LNR FRONT INSULATION LINER 2 Shadow Box Dobby Ripstop (L) Lining

PD25-05-FRONT-INS-LNR FRONT INSULATION LINER 2 Cloth, Batting, Polyester 2.4 ounces per square yard

(N) Insulation

PD25_05-SLEEVE-INSULATION SLEEVE INSULATION 2 Cloth, Batting, Polyester 2.4 ounces per square yard

(N) Insulation

PD25_05-ZIP-GUARD ZIP GUARD 1 Lightweight Nylon Ripstop (A) Shell

PD25_05-SNAP-FLAP SNAP FLAP 1 Lightweight Nylon Ripstop (A) Shell

PD25_05-SLEEVE-SHELL SLEEVE SHELL 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-LOW-PKT-FCG-TOP LOW POCKET FACING TOP 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-LOW-PKT-FCG-BTM LOW POCKET FACING BOTTOM 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-LOW-PKT-EXT LOW POCKET EXTENSION 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-LOW-PKT-BAG LOW POCKET BAG 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-FRONT-SHELL FRONT SHELL 2 Lightweight Nylon Ripstop (A) Shell

PD25_05-COLLAR-SHELL COLLAR SHELL 1 Lightweight Nylon Ripstop (A) Shell

PD25_05-BACK-SHELL BACK SHELL 1 Lightweight Nylon Ripstop (A) Shell

Pattern Support Details Pattern Name Piece Part Cut Part Comments Image

PD25_05-SLEEVE-HEM-EL

ASTIC-TMP

SLEEVE HEM ELASTIC

TEMPLATE

0 (T) TEMPLATE

PD25_05-SLEEVE-LINER-R

FC-TMP

SLEEVE LINER

REINFORCEMENT

TEMPLATE

0 (T) TEMPLATE

9/4/2025 Page 13 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

9/4/2025 Page 14 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction Images

9/4/2025 Page 15 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Internal View

Front details

9/4/2025 Page 16 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Back details

Construction Details Construction Area / Location Description Requirement Image Number

Collar JOINING COLLAR/NECK 1) Set twill tape to fleece snap backing backstitch,topstich and hem.

2) Set twill tape to fleece collar lining.

3) Set twill tape to snap flap fleece.

4) Baste fleece collar lining to flc collar insul. Join collar shell to fleece collar lining. Join snap flap to snap flap facing with interlining. Turn and baste snap flap to collar. Baste snap backing to collar.

9/4/2025 Page 17 of 37

Construction Details Construction Area / Location Description Requirement Image Number

Front PART I 1) Make zipper guard by sandwiching the interlining piece in the zipper guard piece and securing with stitches indicated on the pattern.

2) Chest pocket: add the zipper welt pocket for the chest pocket with the pocket lining on the lining/ insluation piece. While the pocket bag is open, top stitch around the zipper and bar tack zipper ends of the welt. Mark for pocket quilt stitch. Sew inside pocket quilt stitch line. Then fold over pocket lining to match the seams and baste.

Set size label. Attach insulation to liner.

Mark for bottom quilt stitch. Sew bottom quilt stitch. Bartack x 2 upper chest pocket.

Front PART II 3) For the side pockets, baste interlining to lower pkt fac top and lower pkt fac bottom. Edge lower pkt fac top. Set zipper to low pkt facing bottom. Set low pkt ext. Edge stitch according to pattern location having seam allowance towards the facing.

Attach zipper on this facing piece and serge the seam allowance. Sew reinforcement onto the pocket bag and location is indicated on the pattern.

Low pocket extension is sewn onto the other side of the zipper. Fold the seam allowance towards the extension and edge stitch. Fold over the pkt bag and sn baste and serge the top and sides of the pkt bag (leave opening).

4) Bartack pocket opening x 4.

5) Baste insulation to liner. Mark for quilt stitch and stitch x 2. Baste all sides of both front panels.

Back BACK TORSO

CONSTRUCTION

1) Baste bottom back insulation to back lining. Mark for quilt stitch. Make quilt stitches. Set back bottom lining to fleece back.

2) Baste center back hanger loop to fleece back. Baste all sides of panel.

Sleeves SLEEVE CONSTRUCTION 1) Baste elastic thumb loop to slv lining under. Set to sleeve liner with twill tape and backstitch.

2) Baste insulation to sleeve liner.

3) Mark for quilt stitch. Add quilt stitch x

4. Set sleeve fleece panel to liner and self (leave opening). Close sleeve (leave opening).

4) Edge sleeve cuff. Cut cuff elastic to specifications and single needle tack overlap. Insert elastic in cuff and hem.

9/4/2025 Page 18 of 37

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

At all the joining seams

301 SSa-1 9-12

Inner pocket with zipper

301 SSe-1 9-12

Binding sleeves, under armhole and bottom of the jacket

401 BSc-1 9-12

Quiliting insulation

301 SSv-1 9-12

Dart, under zipper guard

301 OSf-2 9-12

Sleeves, front and back

514 9-12 Stitch: MS

Construction Details Construction Area / Location Description Requirement Image Number

In Process Step JOINING PROCESS 1) Baste sleeves.

2) Join front, back and sleeves (leave opening in body fleece).

3) Flatlock join fleece underarm seam.

4) Bind pit bartack and trim.

5) Finish opening in fleece sleeve and sideseam.

6) Set collar to shell wrap and clean set collar to lining.

7) Bind bottom. Meet specification for length.

8) Set zipper to jacket shell with storm flap.

9) Set zipper to jacket liner.

10) Topstitch Collar (stitch in the ditch).

In Process Step FINISHING 1) Close pocket bags.

2) Bartack front zipper and pull.

4) Bartack center front bottom of zipper.

5) Mark and set snaps.

6) Trim all loose thread and inspect.

Construction Details Secondary Construction Area / Location Description Requirement Image

9/4/2025 Page 19 of 37

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

BINDING AT ZIPPER BOTTOM 1/6 x 3/8 24-32 2

¨ þ

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4"cut

TOP OF ZIPPER 1/6 x 3/8 24-32 2 ¨ þ BARTACK ZIPPER TAPE TO SEAM

ALLOWANCE

POCKET 1/6 x 3/8 24-32 6 þ ¨ TOP AND BOTTOM OF ALL POCKET

OPENINGS

OPEN ARM PIT 1/6 x 3/8 24-32 4 þ ¨ ACROSS UNDERARM SEAMS ON TOP

OF BINDING (2 PER OPENING)

ZIPPER PULL TABS 1/6 x 3/8 18-24 6

¨ ¨ Parallel to Finished Edge, 2 BARTACKS

PER 1 ZIPPER PULL

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

Underarm fleece joining panel

607 9-12 Stitch: FL

9/4/2025 Page 20 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

9/4/2025 Page 21 of 37

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ L3S05 Collar Height at Center Back Measurement taken at center back from collar seam to top of bendback. 4 3/4 1/4 0 0 0 0 0 0

¨ L3S09 HEIGHT OF BENDBACK AT TOP EDGE OF

COLLAR

Measurement taken at center back from joining seam of woven/knit to top of collar. 3/8 1/8 0 0 0 0 0 0

¨ L3S16 CENTER FRONT LENGTH (X Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 29 1/2 0 0 0 0 0 1/2

¨ L3S20 FRONT NECK DROP

Measurement taken straight with garment pressed flat (face up) from HPS height at center front to lowest point of neck opening at center front

3 3/4 1/4 0 0 0 0 0 0

¨ L3S24 CHEST WIDTH - AT UNDERARMHOLE EDGE (X

Long)

Measurement taken from folded edge to folded edge of fleece side panels at armhole opening finished bound edge

26 1/2 1/2 0 0 0 0 0 2

¨ L3S22 CHEST WIDTH - AT UNDERARMHOLE EDGE

(Regular)

Measurement taken from folded edge to folded edge of fleece side panels at armhole opening finished bound edge

22 1/2 1/2 2 2 0 2 2 2

¨ L3S23 CHEST WIDTH - AT UNDERARMHOLE EDGE

(Long)

Measurement taken from folded edge to folded edge of fleece side panels at armhole opening finished bound edge

22 1/2 1/2 0 2 0 2 2 2

¨ L3S21 CHEST WIDTH - AT UNDERARMHOLE EDGE

(Short)

Measurement taken from folded edge to folded edge of fleece side panels at armhole opening finished bound edge

22 1/2 1/2 2 2 0 2 0 0

¨ L3S25 DESIGNATED POM - FRONT BODY WAIST

LOCATION (Short)

Measurement located down from neck seam at CF to designated POM 15 1/2 1/2 1/2 1/2 0 1/2 0 0

¨ L3S27 DESIGNATED POM - FRONT BODY WAIST

LOCATION (Long)

Measurement located down from neck seam at CF to designated POM 16 1/2 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S28 DESIGNATED POM - FRONT BODY WAIST

LOCATION (X Long)

Measurement located down from neck seam at CF to designated POM 18 1/2 0 0 0 0 0 1/2

¨ L3S29 WAIST WIDTH-DOWN FROM CF NECKLINE AT

DESIGNATED POM (Short)

Measurement taken with garment laid flat from side seam edge to edge at designated front body waist location 21 1/2 2 2 0 2 0 0

¨ L3S30 WAIST WIDTH - DOWN FROM CF NECKLINE

AT DESIGNATED POM (Reg)

Measurement taken with garment laid flat from side seam edge to edge at designated front body waist location 21 1/2 2 2 0 2 2 2

¨ L3S31 WAIST WIDTH-DOWN FROM CF NECKLINE AT

DESIGNATED POM (Long)

Measurement taken with garment laid flat from side seam edge to edge at designated front body waist location 21 1/2 0 2 0 2 2 2

Department of Defense Clothing and Textiles

Style# AR-ETP-25-102

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Grade Rule Size Range Alpha Sizes XXS-4XL | Fit Type Unisex

Selected Sizes X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

9/4/2025 Page 22 of 37

Small Small Mediu m Large X

Large

XX

Large

¨ L3S32 WAIST WIDTH-DOWN FROM CF NECKLINE AT

DESIGNATED POM (XLong)

Measurement taken with garment laid flat from side seam edge to edge at designated front body waist location 25 1/2 0 0 0 0 0 2

¨ L3S37 BOTTOM OPENING WIDTH - RELAXED (Short) Measurement taken straight from inside folded edge to edge of side fleece inserts at hem opening 18 1/2 2 2 0 2 0 0

¨ L3S38 BOTTOM OPENING WIDTH - RELAXED

(Regular)

Measurement taken straight from inside folded edge to edge of side fleece inserts at hem opening 18 1/2 2 2 0 2 2 2

¨ L3S39 BOTTOM OPENING WIDTH - RELAXED (Long) Measurement taken straight from inside folded edge to edge of side fleece inserts at hem opening 18 1/2 0 2 0 2 2 2

¨ L3S40 BOTTOM OPENING WIDTH - RELAXED (X

Long)

Measurement taken straight from inside folded edge to edge of side fleece inserts at hem opening 22 1/2 0 0 0 0 0 2

¨ L3S41 BACK DROP TAIL LENGTH

Measurement taken at center of garment from hem opening height down to lowest point of drop tail at center back

2 7/8 1/4 0 0 0 0 0 0

¨ L3S45 BACK NECK DROP

Measurement taken straight with garment pressed flat (face down) from HPS height at center back to lowest point of neck opening at center back

1 1/8 1/8 0 0 0 0 0 0

¨ L3S47 BACK NECK OPENING (Short) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 9 1/4 1/2 1/2 0 1/2 0 0

¨ L3S48 BACK NECK OPENING (Regular) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 9 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ L3S49 BACK NECK OPENING (Long) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 9 1/4 0 1/2 0 1/2 1/2 1/2

¨ L3S50 BACK NECK OPENING (XLong) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 10 1/4 0 0 0 0 0 1/2

¨ L3S51 CENTER BACK BODY LENGTH (Short) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

30 7/8 1/2 1/2 1/2 0 1/2 0 0

¨ L3S52 CENTER BACK BODY LENGTH (Regular) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

31 7/8 1/2 1/2 1/2 0 1/2 1/2 1/2

¨ L3S53 CENTER BACK BODY LENGTH (Long) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

32 7/8 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S54 CENTER BACK BODY LENGTH (XLong) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

34 7/8 1/2 0 0 0 0 0 1/2

¨ L3S55 LONG SLEEVE LENGTH FROM CB (Short) 3-point measurement taken straight from CB neck seam, over 9" to fold of sleeve, then straight along center of sleeve to finished hem edge at sleeve opening

35 1/4 1/2 7/8 7/8 0 7/8 0 0

¨ L3S57 LONG SLEEVE LENGTH FROM CB (Long) 3-point measurement taken straight from CB neck seam, over 9" to fold of sleeve, then straight along center of sleeve to finished hem edge at sleeve opening

38 1/4 1/2 0 7/8 0 7/8 7/8 7/8

¨ L3S59 LONG SLEEVE LENGTH FROM SIDE NECK

(Short)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 31 3/4 1/2 3/8 7/8 0 7/8 0 0

¨ L3S60 LONG SLEEVE LENGTH FROM SIDE NECK

(Regular)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 33 1/4 1/2 7/8 7/8 0 7/8 7/8 7/8

¨ L3S61 LONG SLEEVE LENGTH FROM SIDE NECK

(Long)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 34 3/4 1/2 0 7/8 0 7/8 7/8 7/8

¨ L3S63 LONG SLEEVE INSEAM LENGTH (Short) Measurement taken straight from finished edge of underarm hole to hem edge at sleeve opening along inseam fold

21 1/2 1/2 7/8 7/8 0 7/8 0 0

¨ L3S64 LONG SLEEVE INSEAM LENGTH (Regular) Measurement taken straight from finished edge of underarm hole to hem edge at sleeve opening along inseam fold

23 1/2 7/8 7/8 0 7/8 7/8 7/8

9/4/2025 Page 23 of 37

Small Small Mediu m Large X

Large

XX

Large

¨ L3S65 LONG SLEEVE INSEAM LENGTH (Long) Measurement taken straight from finished edge of underarm hole to hem edge at sleeve opening along inseam fold

24 1/2 1/2 0 7/8 0 7/8 7/8 7/8

¨ L3S66 LONG SLEEVE INSEAM LENGTH (XLong) Measurement taken straight from finished edge of underarm hole to hem edge at sleeve opening along inseam fold

27 3/4 1/2 0 0 0 0 0 7/8

¨ L3S15 CENTER FRONT LENGTH (Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 27 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S14 CENTER FRONT LENGTH (Regular) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 26 1/2 1/2 1/2 0 1/2 1/2 1/2

¨ L3S13 CENTER FRONT LENGTH (Short) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 25 1/2 1/2 1/2 0 1/2 0 0

¨ L3S68 BICEP WIDTH- ON HALF AT UNDERARM HOLE

(Regular)

Measurement taken straight from folded edge to edge across the width of the sleeve at finished underarmhole edge

10 1/4 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ L3S69 BICEP WIDTH- ON HALF AT UNDERARM HOLE

(Long)

Measurement taken straight from folded edge to edge across the width of the sleeve at finished underarmhole edge

10 1/4 1/4 0 1/2 0 1/2 1/2 1/2

¨ L3S70 BICEP WIDTH- ON HALF AT UNDERARM HOLE

(XLong)

Measurement taken straight from folded edge to edge across the width of the sleeve at finished underarmhole edge

11 1/4 1/4 0 0 0 0 0 1/2

¨ L3S71 LONG SLEEVE OPENING WIDTH (Short) Measured from folded edge to edge at sleeve opening 3 3/4 1/4 1/8 1/8 0 1/8 0 0

¨ L3S72 LONG SLEEVE OPENING WIDTH (Regular) Measured from folded edge to edge at sleeve opening 3 3/4 1/4 1/8 1/8 0 1/8 1/8 1/8

¨ L3S74 LONG SLEEVE OPENING WIDTH (XLong) Measured from folded edge to edge at sleeve opening 4 1/4 0 0 0 0 0 1/8

¨ L3S75 UNDER ARM HOLE OPENING LENGTH

With garment pressed flat on its side and sleeve raised, measurement is taken straight along the folded edge of the armhole binding

6 1/2 1/4 0 0 0 0 0 0

¨ L3S01 Collar Height at Center Front Measurement taken at center front from collar seam to top of bendback. 4 3/4 1/4 0 0 0 0 0 0

¨ L3S67 BICEP WIDTH- ON HALF AT UNDERARM HOLE

(Short)

Measurement taken straight from folded edge to edge across the width of the sleeve at finished underarmhole edge

10 1/4 1/4 1/2 1/2 0 1/2 0 0

¨ L3S26 DESIGNATED POM - FRONT BODY WAIST

LOCATION (Regular)

Measurement located down from neck seam at CF to designated POM 16 1/2 1/2 1/2 0 1/2 1/2 1/2

¨ L3S73 LONG SLEEVE OPENING WIDTH (Long) Measured from folded edge to edge at sleeve opening 3 3/4 1/4 0 1/8 0 1/8 1/8 1/8

¨ L3S56 LONG SLEEVE LENGTH FROM CB (Regular) 3-point measurement taken straight from CB neck seam, over 9" to fold of sleeve, then straight along center of sleeve to finished hem edge at sleeve opening

36 3/4 1/2 7/8 7/8 0 7/8 7/8 7/8

¨ L3S58 LONG SLEEVE LENGTH FROM CB (XLong) 3-point measurement taken straight from CB neck seam, over 9" to fold of sleeve, then straight along center of sleeve to finished hem edge at sleeve opening

41 1/2 1/2 0 0 0 0 0 7/8

¨ L3S62 LONG SLEEVE LENGTH FROM SIDE NECK

(XLong)

Measurement taken along center of sleeve (at fold) from side neck at seam to finished hem edge at sleeve opening 38 1/2 0 0 0 0 0 7/8

¨ L3S81 SIDE SEAM INSERT LENGTH AT Back (Long) Measurement taken along back seam from finished edge at underarmhole to finished hem edge 21 1/2 3/8 0 0 0 0 0 0

¨ L3S80 SIDE SEAM INSERT LENGTH AT Back (Regular) Measurement taken along back seam from finished edge at underarmhole to finished hem edge 20 1/2 3/8 0 0 0 0 0 0

¨ L3S79 SIDE SEAM INSERT LENGTH AT Back (Short) Measurement taken along back seam from finished edge at underarmhole to finished hem edge 19 1/2 3/8 0 0 0 0 0 0

9/4/2025 Page 24 of 37

Small Small Mediu m Large X

Large

XX

Large

¨ L3S82 SIDE SEAM INSERT LENGTH AT Back (XLong) Measurement taken along back seam from finished edge at underarmhole to finished hem edge 22 1/2 3/8 0 0 0 0 0 0

¨ L3S77 SIDE SEAM INSERT LENGTH AT FRONT (Long) Measurement taken along front seam from finished edge at underarmhole to finished hem edge 19 3/8 0 0 0 0 0 0

¨ L3S76 SIDE SEAM INSERT LENGTH AT FRONT

(Regular)

Measurement taken along front seam from finished edge at underarmhole to finished hem edge 18 3/8 0 0 0 0 0 0

¨ L3S75 SIDE SEAM INSERT LENGTH AT FRONT (Short) Measurement taken along front seam from finished edge at underarmhole to finished hem edge 17 3/8 0 0 0 0 0 0

¨ L3S78 SIDE SEAM INSERT LENGTH AT FRONT

(XLong)

Measurement taken along front seam from finished edge at underarmhole to finished hem edge 20 3/8 0 0 0 0 0 0

¨ L3S80 FRONT POCKET OPENING LENGTH Measurement taken from inside of pocket opening edge to edge along front torso inseam 8 1/2 1/4 0 0 0 0 0 0

Additional TOFM Details

Code Point Of Measure How to Measure Tol Base Size Grade

9/4/2025 Page 25 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods End Item General Statement General Statement Finished end items shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Testing End item General Statement General Statement Finished end items shall be examined and tested in accordance with the specified examinations and tests on the end item properties unless otherwise excluded, amended, or modified in this document or applicable procurement documents. End item physical tests apply to the finished end item to include all pre and post treatments, assemblies and operations.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

First Article Testing AATCC 150 to be done for FAT only

9/4/2025 Page 26 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/4/2025 Page 27 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes, warp %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 50 washes, fill %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-g uidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?pa ge=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.

9/4/2025 Page 28 of 37

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C

9/4/2025 Page 29 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/4/2025 Page 30 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

1 Jackets Material 01 Hole, cut, tear, smash, burn, drill hole, run, needle chew, abrasion damaging the fabric, affecting appearance or serviceability þ ¨

2 Jackets Material 02 Any misweave, knot and/or slub, visible mend, missing or broken yarn ¨ þ

3 Jackets Material 03 Any weakening defect such as smash, multiple float, thin place, drop stitch or loose slub that might develop into hole " ¨ þ

4 Jackets Cutting 04 Any component part not cut in accordance with specified directional lines, twill lines and/or fabric grain not parallel between parts þ ¨

5 Jackets Components 05 Component omitted þ ¨

6 Jackets Stitching and Seaming 06 Omitted þ ¨

7 Jackets Stitching and Seaming 07 Seam and/or stitch type not as specified þ ¨

8 Jackets Bartacks 08 Loose and or tight stitch tension þ ¨

9 Jackets Bartacks 09 Omitted þ ¨

10 Jackets Bartacks 10 Placement not as specified and/or misaligned þ ¨

11 Jackets Sleeve and armholes 11 Sleeves reversed þ ¨

12 Jackets Sleeve and armholes 12 Sleeves tight, causing pleat and/or excessive puckers on front, back and/or sleeve ¨ þ

13 Jackets Hem(s) 13 Hem twisted, pleated and/or puckered þ ¨

14 Jackets Hem(s) 14 Irregular in width ¨ þ

15 Jackets Hem(s) 15 Not finished as specified þ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

9/4/2025 Page 31 of 37

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

16 Jackets Cleanliness 16 Any spot and/or stain on outside that cannot be completely removed with a clean cloth moistened with water þ ¨

17 Jackets Cleanliness 17 Thread ends on the outside of the garment ¨ þ

18 Jackets Labels 18 Omitted þ ¨

19 Jackets Labels 19 Label text incorrect, incomplete and/or illegible (smeared or bleeding) þ ¨

Additional defects Part NOS Defect Major Minor

1 Material and Components 20 Thread color or type not as specified. ¨ þ

2 Material and Components 21 Metallized material warping; Coating uneven - Visual Defect ¨ þ

3 Material and Components 22 Metallized material warping; Coating uneven - Functional Defect þ ¨

4 Material and Components 23 Material incorrect, not as specified. þ ¨

5 Material and Components 24 Knots greater than Fabric Defect Scale Level C. þ ¨

6 Material and Components 25 Slubs greater than Fabric Defect Scale Level D. þ ¨

7 Cleanliness 26 Any size or shade markings or residue on outside. ¨ þ

8 Material and Components 27 Any component not as specified. þ ¨

9 Material and Components 28 Label causes damage to the item. þ ¨

10 Construction, Assemby and Workmanship 29 Elastic warped; poor recovery causing hem not to gather. þ ¨

11 Construction, Assemby and Workmanship 30 Sleeve lengths vary by more than 3/4". þ ¨

12 Construction, Assemby and Workmanship 31 Bartacks not serving the intended purpose. þ ¨

13 Material and Components 32 Any component part twisted, distorted, pleated, misshaped or tight. þ ¨

14 Material and Components 33 Fullness creating unwanted permanent, fold, pleat, crease in fabric or garment. ¨ þ

15 Construction, Assemby and Workmanship 34 Seam irregular, twisted, pleated or wavy. þ ¨

16 Construction, Assemby and Workmanship 35 Seam puckered, longer than 1/4". þ ¨

17 Construction, Assemby and Workmanship 36 Any part of the shirt caught in an unrelated stitching. ¨ þ

18 Construction, Assemby and Workmanship 37 End of stitching not back stitched or caught in other seams as required. þ ¨

19 Construction, Assemby and Workmanship 38 Thread break secured by stitching back on the break less than 1/2". ¨ þ

20 Construction, Assemby and Workmanship 39 End of continuous line of stitching overlapped less than 1/2". ¨ þ 9/4/2025 Page 32 of 37

Additional defects Part NOS Defect Major Minor

21 Construction, Assemby and Workmanship 40 Gauge of stitching and seam allowance irregular or not within range specified, or varies more than 1/16" when no range is specified. þ ¨

22 Construction, Assemby and Workmanship 41 Edge or raised stitching sewn too close to edge, resulting in damage to cloth. þ ¨

23 Construction, Assemby and Workmanship 42 One or more broken stitches or two or more continuous skipped or run-off stitches on joining seam. þ ¨

24 Construction, Assemby and Workmanship 43 Raw edges (more than 1/2"). þ ¨

25 Construction, Assemby and Workmanship 44 Stitch tension resulting in loose seams (up to ½”). ¨ þ

26 Construction, Assemby and Workmanship 45 Stitch tension resulting in loose seams (more than ½”). þ ¨

27 Construction, Assemby and Workmanship 46 Tight tension (stitches break when normal strain is applied in the direction of the seam or stitching. þ ¨

9/4/2025 Page 33 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

General Statement - Packaging

Defense Logistics Agency (DLA) Troop Support For acquisition purposes, the packaging requirements shall be as specified in the contract or order. When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activities within the Military Service or Defense Agency, or within the military service’s system commands. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

2 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

Additional Packaging General Statements Category Description Detail Statement

9/4/2025 Page 34 of 37

Description All Range Tactical Clothing (ARTC) - Insulated Liner Jacket

MIL/CID Number N/A

Style Status Concept

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement comments

Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

2 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

3 Figures General Statement Disclaimer When inconsistencies exist between the written specification and the figures, the written specification shall govern.

Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

7…