Attachment 1 (L7) - AR-ETP-25-095_ARTC Extreme Cold Trouser_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

Style# AR-ETP-25-095

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This product covers the requirements for the extreme cold weather insulated trouser for use in extreme cold weather that is apart of All-Range Tactical Clothing

Design

Trouser for extreme cold weather

Size & Length

9/5/2025 Page 1 of 41

Size & Length

9/5/2025 Page 2 of 41

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

9/5/2025 Page 3 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-24-160 Plain Weave Outer shell Outershell, Inside waist front and back Woven

~5.5 yds

AR-MTP-24-161 Plain Weave Nylon 70D Reinforcement outershell on lower leg

Woven

Nylon 100 ~2 yds

AR-MTP-24-156 Woven Stretch 4-way Inseam gusset Woven

Nylon/Spandex 91/9 ~1 yd

AR-MTP-25-196 Cloth, Batting, Polyester 4 ounces per square yard Insulation Non Woven

Polyester 100

AR-MTP-24-162 Nylon Ripstop 40D Lining Woven

Nylon 100

AR-MTP-24-163 Heavyweight, Interlining

Center Back Waist Panel, Waist

Facings, Waist Adjusters, Waist Tab

Hem Tab, Side Zipper Guard, Fly Extension, Inside Waist FR and BK

Woven

Cotton 100

Components

Materials and Components

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

9/5/2025 Page 4 of 41

Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-194 No. 5, Type I, Style 4 - Individual Element 1 6.25 inches Front Fly A-A-55634 Type I Style 4 Alters - see pattern

AR-CTP-24-192 Fastener, Separating, Nonreversible, Zipper, No. 5, Type III 2 39.5 inches Side Leg A-A-55634 Type III Style 13

Grades and Alters - see pattern

AR-CTP-25-264 Webbing, Zipper Thong 2 10.5 inches, finishes at 4.5 inches Side Top A-A-55634

Sear Ends to Prevent Unravelling

AR-CTP-25-264 Webbing, Zipper Thong 2 6 inches, finishes at 3 inches Side Hem A-A-55634

Sear Ends to Prevent Unravelling

AR-CTP-25-264 Webbing, Zipper Thong 1 6 inches Front Fly A-A-55634

Sear Ends to Prevent Unravelling

AR-CTP-24-204 Rubber Tubing, 1/4" 2 2 inches Outseam Opening Top Slider

AR-CTP-24-199 Nylon tape 3/8" width 4 3.75 inches Suspender Loops Secured to Front and Back Waist Facing

MIL-DTL-5038 Type III See pattern for finished dimension. Sear Ends to prevent unravelling.

AR-CTP-24-199 Nylon tape 3/8" width 4 4 inches Exit Point of Waist Adjuster to Reinforce Opening. MIL-DTL-5038 Type III

AR-CTP-24-199 Nylon tape 3/8" width 2 3.5 inches Secure Barrel Cordlocks MIL-DTL-5038 Type III

AR-CTP-24-199 Nylon tape 3/8" width 2 1 inch Hem Shockcord MIL-DTL-5038 Type III Insert into Seam

AR-CTP-24-199 Nylon tape 3/8" width 2 1.5 inches Hem Shockcord MIL-DTL-5038 Type III Insert into Seam

AR-CTP-24-198 Nylon tape 1" width 2 42.75 inches Side Leg Openings

MIL-DTL-5038 Type III Grades and Alters for Trouser Side Leg Opening - Refer to

Pattern

9/5/2025 Page 5 of 41

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-198 Nylon tape 1" width 5 5.5 inches Belt Loops MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 3 inches Drawcord Keeper at Inseam MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 4 1 inch Hem Drawcord MIL-DTL-5038 Type III Insert into Seam

AR-CTP-24-152 Elastic 1.5" Width 1 10.5 inches Back Waist MIL-W-5664 Type II Class 1 Grades for Trouser - refer to

Pattern

AR-CTP-24-150 Elastic Drawcord, 3/16" 2 144 inches total Hem Opening MIL-DTL-43701 Type II

Grades for Trouser - refer to Pattern

AR-CTP-24-170 Nylon Fastener Tape, Hook, 2" 2 4.5 inches Waist Band Adjuster A-A-55126 Type II Class 1

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width 2 4.5 inches Waist Band Adjuster A-A-55126 Class 1

AR-CTP-24-208 Snaps (Male Part), No Gloss 2 Waist Band Closure MIL-DTL-10884 Style 2A Finish

1 per side

AR-CTP-24-207 Snaps (Female Part), No Gloss 2 Waist Band Closure MIL-DTL-10884 Style 2A Finish

1 per side

AR-CTP-24-208 Snaps (Male Part), No Gloss 1 Center Front MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 1 Center Front MIL-DTL-10884 Style 2A Finish

9/5/2025 Page 6 of 41

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-113 Bar Code Label/Tag Paper

AR-CTP-24-115 Identification and care label

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-208 Snaps (Male Part), No Gloss 2 Hem MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 2 Hem MIL-DTL-10884 Style 2A Finish

AR-CTP-24-209 Grommet, Size #0 4 Hem Stirrup Attachment Points NASM 16491 Type III Class III

AR-CTP-24-210 Eyelet, Size #00 4 Hem Cinch at each Hem NASM 20652/1B 2 per side

AR-CTP-24-274 CordLoc - Barrel 2 Hem Drawcord Cinch

AR-CTP-24-176 Polyester Cotton-Covered Thread All Top Stitch A-A-50199 Type I

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord Inside Waist A-A-59826 Type III Class A

AR-CTP-24-131 Thread, Nylon, Tex 46-51 All Seams, Quilting Stitches A-A-59826 Type I Class B

Artwork

Image/Sketch ProductCode Description Artwork type Comments

9/5/2025 Page 7 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Colorways Color Family Color Image/Swatch (Ref)L (Ref)A (Ref)B Comments

Camouflage | 0001 | Army OCP Print |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-24-160 Plain Weave Outer shell Outershell, Inside waist front and back 0001 | Army OCP Print |

AR-MTP-24-161 Plain Weave Nylon 70D Reinforcement outershell on lower leg 0001 | Army OCP Print |

AR-MTP-24-156 Woven Stretch 4-way Inseam gusset 0001 | Army OCP Print |

AR-MTP-25-196 Cloth, Batting, Polyester 4 ounces per square yard Insulation WHT | White |

AR-MTP-24-162 Nylon Ripstop 40D Lining 499 | Tan |

AR-MTP-24-163 Heavyweight, Interlining

Center Back Waist Panel, Waist Facings, Waist Adjusters, Waist Tab

Hem Tab, Side Zipper Guard, Fly Extension, Inside Waist FR and BK

Colors

General Statements - Colors Category Description Statements

General Statement - Colors End Item The end item(s) shall be in the following color(s) as specified in the contract.

General Statement - Colors Component The component (s) shall be in the following color(s) as specified in the contract.

9/5/2025 Page 8 of 41

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-194 No. 5, Type I, Style 4 - Individual Element 499 | Tan |

AR-CTP-24-192 Fastener, Separating, Nonreversible, Zipper, No. 5, Type III 499 | Tan |

AR-CTP-25-264 Webbing, Zipper Thong 499 | Tan |

AR-CTP-25-264 Webbing, Zipper Thong 499 | Tan |

AR-CTP-25-264 Webbing, Zipper Thong 499 | Tan |

AR-CTP-24-204 Rubber Tubing, 1/4" 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

9/5/2025 Page 9 of 41

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-198 Nylon tape 1" width 499 | Tan |

AR-CTP-24-152 Elastic 1.5" Width 2414 | White |

AR-CTP-24-150 Elastic Drawcord, 3/16" 499 | Tan |

AR-CTP-24-170 Nylon Fastener Tape, Hook, 2" 499 | Tan |

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width 499 | Tan |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-209 Grommet, Size #0 499 | Tan |

AR-CTP-24-210 Eyelet, Size #00 499 | Tan |

AR-CTP-24-274 CordLoc - Barrel 499 | Tan |

9/5/2025 Page 10 of 41

Label - Colors Image/Sketch Product Code Description

AR-CTP-24-113 Bar Code Label/Tag

AR-CTP-24-115 Identification and care label

Component-Colors Image/Sketch Product Code Description Colorway1

AR-CTP-24-176 Polyester Cotton-Covered Thread 499 | Tan |

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord 499 | Tan |

AR-CTP-24-131 Thread, Nylon, Tex 46-51 499 | Tan |

9/5/2025 Page 11 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

9/5/2025 Page 12 of 41

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

9/5/2025 Page 13 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_11-FRONT-WAIST-FACING FRONT WAIST FACING 2 Plain Weave Outer shell (A) Shell

PD25_11-FRT-WAIST-FCG-INTERLIN

ING FRONT WAIST FACING INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-BACK-WAIST BACK WAIST 2 Plain Weave Outer shell (A) Shell

PD25_11-BACK-WAIST-INTERLINING BACK WAIST INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-WAIST-TAB WAIST TAB 4 Plain Weave Outer shell (A) Shell

PD25_11-WAIST-TAB-INT WAIST TAB INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-WAIST-ADJUSTER WAIST ADJUSTER 2 Plain Weave Nylon 70D (R) Reinforcement

PD25_11-ADJUSTER-INTERLINING ADJUSTER INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-FLY-EXTENSION FLY EXTENSION 2 Plain Weave Outer shell (A) Shell

PD25_11-FLY-EXT-INTERLINING FLY EXTENSION INTERLINING 1 Heavyweight, Interlining (I) Interlining

PD25_11-FLY-FACING FLY FACING 2 Plain Weave Outer shell (A) Shell

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

9/5/2025 Page 14 of 41

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_11-FLY-FCG-INTERLINING FLY FACING INTERLINING 1 Heavyweight, Interlining (I) Interlining

PD25_11-BELT-LOOPS BELT LOOPS 1 Plain Weave Outer shell (A) Shell

PD25_11-FRONT-TOP FRONT TOP 2 Plain Weave Outer shell (A) Shell

PD25_11-FRONT-LOW-LEG FRONT LOW LEG 2 Plain Weave Nylon 70D (R) Reinforcement

PD25_11-BACK-TOP BACK TOP 2 Plain Weave Nylon 70D (A) Shell

PD25_11-BACK-REINFORCEMENT BACK REINFORCEMENT 2 Plain Weave Nylon 70D (R) Reinforcement

PD25_11-FRONT-INSULATION FRONT INSULATION 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_11-FRONT-INSULATION FRONT INSULATION 2 Nylon Ripstop 40D (L) Lining

PD25_11-BACK-INSULATION BACK INSULATION 2 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_11-BACK-INSULATION BACK INSULATION 2 Nylon Ripstop 40D (L) Lining

PD25_11-INSEAM-GUSSET INSEAM GUSSET 1 Woven Stretch 4-way (S) Stretch

PD25_11-INSEAM-GUSSET-INSULAT

ION INSEAM GUSSET INSULATION 1 Cloth, Batting, Polyester 4 ounces per square yard

(N) Insulation

PD25_11-INSEAM-GUSSET-INSULAT

ION INSEAM GUSSET INSULATION 1 Plain Weave Nylon 70D (L) Lining

PD25_11-OUTSEAM-FLAP OUTSEAM FLAP 2 Plain Weave Outer shell (A) Shell

PD25_11-FLAP-INTERLINING OUTSEAM FLAP INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-OUTSEAM-ZIP-GUARD OUTSEAM ZIP GUARD 2 Plain Weave Outer shell (A) Shell

PD25_11-OUTSEAM-GUARD-INTERL

INING OUTSEAM GUARD INTERLINING 2 Heavyweight, Interlining (I) Interlining

PD25_11-HEM-TAB HEM TAB 2 Plain Weave Nylon 70D (R) Reinforcement

PD25_11-HEM-TAB-INT HEM TAB INTERLINING 2 Heavyweight, Interlining (I) Interlining

Pattern Support Details Pattern Name Piece Part Cut Part Comments Image

PD25_11-FRT-WAIST-FCG-

STITCHING-TMP

FRONT WAIST FACING

STITCHING

0 (T) TEMPLATE

PD25_11-BACK-WAIST-FC

G-STITCHING-TMP

BACK WAIST FACING

STITCHING

0 (T) TEMPLATE

9/5/2025 Page 15 of 41

Pattern Support Details Pattern Name Piece Part Cut Part Comments Image

PD25_11-BELT-LOOP-REIN

FORCEMENT-TMP

BELT LOOP

REINFORCEMENT

0 (T) TEMPLATE

PD25_11-DRAWCORD-KEE

PER-TMP

DRAWCORD KEEPER 0 (T) TEMPLATE

PD25_11-WAIST-ELASTIC-

TMP

WAIST ELASTIC 0 (T) TEMPLATE

PD25_11-GUARD-GROSGR

AIN-TMP

ZIP GUARD GROSSGRAIN 0 (T) TEMPLATE

PD25_11-SNP-GMT-RNF-T

MP

SNAP AND GROMMET

REINFORCEMENT

0 (T) TEMPLATE

PD25_11-BACK-SUSPEND

ER-LOOP-TMP

BACK SUSPENDER LOOP 0 (T) TEMPLATE

9/5/2025 Page 16 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

9/5/2025 Page 17 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Construction Images

9/5/2025 Page 18 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Front, side, beck detail views

Waist detail

9/5/2025 Page 19 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Inside waist view

Front waist

9/5/2025 Page 20 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Leg placket opening detail

Construction Details Secondary Construction Area / Location Description Requirement Image

Construction Details Construction Area / Location Description Requirement Image Number

9/5/2025 Page 21 of 41

PART I 1) Cut fabric, cording, tape, and webbing according to the Cutters Must and Bill of Materials (BOM).

2) Ensure cord ends, tape, and webbing are seared with a hot knife or cutter to ensure unraveling is prevented. Round edges that are pointed and sharp.

3) Add markings to all pattern pieces according to the patterns and templates, which include snaps, grommets, webbing locations, pocket

PART II 4) Sew down interlining to under collar, hook tab, cuff tabs, sleeve extension, underarm zipper guard.

5) Bar tack zipper pulls on the zipper, SMALL COMPONENTS -

PART I

1) Align the front facing to front waist interning sew according to pattern, sew loops and bar -tack the front waist loops.

2) Align the back waist facing to back waist interlining sew according to pattern, join the two pieces together in the center, sew reinforcement tape right on the top of the edge.

3) Construct the waist adjuster by lay the interling in one side of the waist adjuster, stitch down in middle, fold in half right side together stitch bottom of the end, turn right side out, fold hem insert the elastic, top stitch all around 1/8" from the edge, also reinforce box -x stitch at elastic insert, sew down hook right side up at the end.

4) Sew belt loops.

SMALL COMPONENTS -

PART II

5) Create fly facing and fly extension by sandwiching the fly extension to fly extension interning, fly facing to fly interning, sew and turn right side out stitch down according to pattern.

6) Create outseam flap by sew interning to one side the outseam flap following the stitch pattern, fold it in half lengthwise right side together sew at the end, turn the inside out and top stitch 1/8" from the edge.

7) Lay waist tab with waist tab interning stitch down, sandwich order of the right side facing/interning, right side up outseam flap (make sure angle is right position), face down waist-tab, stitch according to pattern seam allowance , turn inside out, top stitch 1/8" from the edge.

9/5/2025 Page 22 of 41

SMALL COMPONENTS -

PART III

8) Create zipper guard by fold it in half lengthwise right side together, turn right side up, insert the interlining piece in the zipper guard piece and securing with stitches and sew down guard grosgrain indicated on the pattern.

9) hem tab - lay interning on wrong side of the hem tab sew, turn right side out top stitch 1/8" from the edge and set the snap.

QUILTING INSULATION 1) Quilting all the insulation to lining for the (2)front, (2) back, follow the designs in the pattern ***NOTE: Sew insulation on the bottom with lining on top. Baste with large stitches around the quilted pieces to keep it all together.

1) Sew front top darts along the waist seam with single needle top stitches.

Length of stitching is marked on the pattern.

2) Sew front low leg darts, seam allowance for the (2) darts point towards each other and single needle top stitch.

3) Join the front top and front low leg together, push seam allowance towards the top and double needle top stitch.

BACK 1) Sew back top darts along the waist seam with single needle top stitches.

Length of stitching is marked on the pattern.

2) Join the back top and back low leg together, push seam allowance towards the top and double needle top stitch.

3) Sew center back top together.

4) Join the back waist components

FRONT AND BACK

INSULATION

1) Sew darts on front low leg insulation

(4) each.

2) Sew darts on back top waist insulation.

3) Sew center back insulation together.

4) Sew the back waist components insulation to back top insulation together.

5) Sew inseam gusset insulation to back insulation together.

6) Tack down drawcord webbing and cord lock with keeper at the front insulation low leg according to pattern

9/5/2025 Page 23 of 41

JOINING - FLY ZIPPER -

PART I

1) Attach the left fly facing to waist facing together at front center bottom of the waist facing.

2) Lay left zipper to fly/waist/facing, sew two rolls of stitch.

3) Lay the waist facing to right side up of the insulation sew down at bottom, fold seam under and top stitch 1/8" from the edge.

4) Sew zipper to zipper extension, join the waist facing to front top and zipper extension in between the liner/insulation front and the self front piece, turn right side out top stich at zipper extension 1/8" from the edge.

5) Sew zipper facing/waist facing to top front together.

6) Sew front top riser together.

7) Sew front top insulation riser together.

8) J stitch on the left fly and two bar-tack through the both layers(front and fly facing).

JOINING - FLY ZIPPER -

PART II

9) Sew previously sewn waist top back and facing waist to top insulation, need sew back together(keep in place) as same sewn seam allowance.

10) Sew the inseam self together.

11) Sew the inseam insulation

SIDE ZIPPER 1) lay the zipper to under side prepared outseam flap and sew down zipper(open-end should on the top).

2) lay the zipper to top of the prepared zipper guard and sew down.

3) On the front, sew the prepared outseam flap in between the liner/insulation front and the self front piece, and turn inside out edge stitch on top of the insulation.

4) On the back, sew the outseam zipper guard in between the liner/insulation back and the self back piece, and turn inside out continue top stitch start from bottom of the zipper through top of the back waist and other side of the bottom of the zipper 1/8" from the edge.

HEM AND CLOSURE 1) Align reinforcement onto the grommet and eyelet location as indicated on the pattern, and then set eyelet.

2) Route through the drawcord to webbing and cord lock.

3) Make sure to sew the drawcord at side zipper opening . Turn under seam allowance and top stitch the hem. Set

9/5/2025 Page 24 of 41

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

All joining seams

301 SSa-1 9-11 EXCEPT TOP TO BOTTOM LEG

Fly extension, fly facing, back waist, waist adjuster, waist tabs and hem tabs

301 SSae-1 9-11

Quilting insulation with lining, waist facings, fly extension and zipper guards

301 SSv-1 7-9 SPI

Knee darts 301 OSf-2 1/8(± 1/32)-inch from edge

Trouser front and Back joining seam

301 LSq-2 9-11

Front and back joint seam

301 LSq-3 9-11

J-stitch and zipper guard grosgrain reinforcement

301 LSbj-1 9-11

Bottom hem 301 Efb-1 9-11

Belt loop 301 EFz-2 9-11 1/2" gauge between stitchlines; optional 504 stitch type

Inside of the trouser, secure waist adjuster loop to waist facing inner waist 301 LSbj-1 9-11

Waist adjuster secure hook to adjuster box x stitch 301 LSbj-1 9-11

FINISHING 1) Set snaps, grommet, and bar-tacks on in joins indicated location.

2) Zipper pulls.

9/5/2025 Page 25 of 41

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

TROUSER BELT LOOP 7/8 29 STITCHES/TACK 5

þ ¨

TROUSER SUSPENDER LOOP 3/8 36 STITCHES/TACK 8

þ ¨

TROUSER FLY J-STITCH (AT BOTTOM) 5/8 29 STITCHES/TACK 1

þ ¨

TROUSER FLY J-STITCH (ALONG

STRAIGHT)

5/8 29 STITCHES/TACK 1

¨ þ

TROUSER RIGHT FLY ZIPPER AT TOP 5/8 29 STITCHES/TACK 1

¨ þ

TROUSER SIDE LEG (AT TOP AND

BOTTOM OF ZIPPER)

7/8 29 STITCHES/TACK 6

¨ þ

FRONT AND BACK RISE (GUSSET

INTERSECTION)

5/8 29 STITCHES/TACK 2

þ ¨ ON SHELL SIDE OF SEAM

PERPENDICULAR TO RISE

ZIPPER PULLS (TROUSER) 1/2 36 STITCHES/TACK 6

¨ þ

9/5/2025 Page 26 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

9/5/2025 Page 27 of 41

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ 1 RELAXED WAIST (ON HALF) (Short) Measurement taken straight from inner part of folded finished top edge to edge at outseam location of waistband (relaxed)

18 1/2 1/2 2 2 0 2 0 0

¨ L7B02 RELAXED WAIST - ON HALF (Regular) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 18 1/2 1/2 2 2 0 2 2 2

¨ L7B03 RELAXED WAIST - ON HALF (Long) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 18 1/2 1/2 0 2 0 2 2 2

¨ L7B04 RELAXED WAIST - ON HALF (XLong) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 22 1/2 1/2 0 0 0 0 0 2

¨ L7B06 BACK YOKE HEIGHT - AT OUTSEAM MEASURED ALONG SEAM OF OUTSEAM FROM BACK

WAIST SEAM TO TOP EDGE 4 1/2 1/4 0 0 0 0 0 0

¨ L7B07 BACK YOKE HEIGHT - AT HIGHEST POINT MEASURED STRAIGHT FROM HIGHTEST POINT OF BACK

YOKE TO YOKE SEAM 6 3/4 1/4 0 0 0 0 0 0

¨ L7B08 BACK YOKE HEIGHT - AT CB MEASURED STRAIGHT FROM CENTER BACK YOKE SEAM

TO YOKE TOP EDGE 4 1/4 0 0 0 0 0 0

¨ D0037.1c Front Rise Waist at Top, to Gusset Seam at Top Short

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

11 1/4 1/4 1/2 1/2 0 1/2 0 0

¨ D00371.d Front Rise Waist at Top, to Gusset Seam at Top Regular

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

11 3/4 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ D0037.1e Front Rise Waist at Top, to Gusset Seam at Top Long

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

12 1/4 1/4 0 1/2 0 1/2 1/2 1/2

¨ D0037.1f Front Rise Waist at Top, to Gusset Seam at Top XLong

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

13 3/4 1/4 0 0 0 0 0 1/2

¨ L7B09 THIGH WIDTH - ON HALF (Short) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 16 3/4 3/8 1 1 0 1 0 0

¨ L7B10 THIGH WIDTH - ON HALF (Regular) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 16 3/4 3/8 1 1 0 1 1 1

¨ L7B11 THIGH WIDTH - ON HALF (Long) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 16 3/4 3/8 0 1 0 1 1 1

Department of Defense Clothing and Textiles

Style# AR-ETP-25-095

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Grade Rule Size Range Alpha Sizes XXS-4XL | Fit Type Unisex

Selected Sizes X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

9/5/2025 Page 28 of 41

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ L7B12 THIGH WIDTH - ON HALF (XLong) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 18 3/4 3/8 0 0 0 0 0 1

¨ L3B13 KNEE WIDTH AT MID-POINT - ON HALF

(Short)

MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 12 5/8 1/4 7/8 7/8 0 7/8 0 0

¨ L3B14 KNEE WIDTH AT MID-POINT - ON HALF

(Regular)

MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 12 5/8 1/4 7/8 7/8 0 7/8 7/8 7/8

¨ L3B15 KNEE WIDTH AT MID-POINT - ON HALF (Long) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 12 5/8 1/4 0 7/8 0 7/8 7/8 7/8

¨ L3B16 KNEE WIDTH AT MID-POINT - ON HALF

(XLong)

MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 14 3/8 1/4 0 0 0 0 0 7/8

¨ D0042.1c Back Rise Waist at Top, to Gusset Seam at Top Short

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 9 3/4 1/4 1/2 1/2 0 1/2 0 0

¨ D0042.1d Back Rise Waist at Top, to Gusset Seam at Top Regular

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 10 1/4 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ D0042.1e Back Rise Waist at Top, to Gusset Seam at Top Long

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 10 3/4 1/4 0 1/2 0 1/2 1/2 1/2

¨ D0042.1f Back Rise Waist at Top, to Gusset Seam at Top XLong

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 12 1/4 1/4 0 0 0 0 0 1/2

¨ L7B17 GUSSET WIDTH AT CROTCH MEASURED STRAIGHT FROM INTERSECTION AT FRONT

RISE SEAM TO INTERSECTION AT BACK RISE SEAM 4 1/4 1/4 0 0 0 0 0 0

¨ L7B18 GUSSET LENGTH MEASURED STRAIGHT FROM INTERSECTION TO

INTERSECTION AT FRONT/BACK INSEAM 20 1/4 1/2 0 0 0 0 0 0

¨ L7B19 FRONT INSEAM LENGTH (Short) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 29 3/4 1/2 0 0 0 0 0 0

¨ L7B20 FRONT INSEAM LENGTH (Regular) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 31 1/4 1/2 0 0 0 0 0 0

¨ L7B21 FRONT INSEAM LENGTH (Long) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 32 3/4 1/2 0 0 0 0 0 0

¨ L7B22 FRONT INSEAM LENGTH (XLong) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 34 1/4 1/2 0 0 0 0 0 0

¨ L7B23 LEG OPENING RELAXED - ON HALF (Short) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 10 1/2 1/4 1/2 1/2 0 1/2 0 0

¨ L7B24 LEG OPENING RELAXED - ON HALF (Regular) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 10 1/2 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ L7B25 LEG OPENING RELAXED - ON HALF (Long) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 10 1/2 1/4 0 1/2 0 1/2 1/2 1/2

¨ L7B26 LEG OPENING RELAXED - ON HALF (XLong) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 11 1/2 1/4 0 0 0 0 0 1/2

¨ D0050C Outseam - Pants Top Waist Edge to Hem- Short

Measure along outseam from top of waist edge to bottom opening 40 3/8 1/2 0 0 0 0 0 0

¨ D0050D Outseam - Pants Top Waist Edge to Hem- Regular

Measure along outseam from top of waist edge to bottom opening 42 3/8 1/2 0 0 0 0 0 0

¨ D0050E Outseam - Pants Top Waist Edge to Hem- Long

Measure along outseam from top of waist edge to bottom opening 44 3/8 1/2 0 0 0 0 0 0

¨ D0050F Outseam - Pants Top Waist Edge to Hem- X Long

Measure along outseam from top of waist edge to bottom opening 46 3/8 1/2 0 0 0 0 0 0

Additional TOFM Details

Code Point Of Measure How to Measure Tol Base Size Grade

9/5/2025 Page 29 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods End Item General Statement General Statement Finished end items shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Testing End item General Statement General Statement Finished end items shall be examined and tested in accordance with the specified examinations and tests on the end item properties unless otherwise excluded, amended, or modified in this document or applicable procurement documents. End item physical tests apply to the finished end item to include all pre and post treatments, assemblies and operations.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/5/2025 Page 30 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/5/2025 Page 31 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes, warp %|Percentage Maximum 5.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 50 washes, fill %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-g uidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?pa ge=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.

9/5/2025 Page 32 of 41

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C

9/5/2025 Page 33 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/5/2025 Page 34 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

1 Trousers Material 01 Hole, cut, tear, smash, burn, drill hole, run, needle chew, abrasion damaging the fabric, affecting appearance or serviceability þ ¨

2 Trousers Material 02 Any misweave, knot and/or slub, visible mend, missing or broken yarn ¨ þ

3 Trousers Material 03 Any weakening defect such as smash, multiple float, thin place, drop stitch or loose slub that might develop into hole " ¨ þ

4 Trousers Cutting 04 Any component part not cut in accordance with specified directional lines, twill lines and/or fabric grain not parallel between parts þ ¨

5 Trousers Components 05 Component omitted þ ¨

6 Trousers Stitching and Seaming 06 Omitted þ ¨

7 Trousers Stitching and Seaming 07 Seam and/or stitch type not as specified þ ¨

8 Trousers Bartacks 08 Omitted þ ¨

9 Trousers Bartacks 09 Loose and or tight stitch tension þ ¨

10 Trousers Bartacks 10 Placement not as specified and/or misaligned þ ¨

11 Trousers Hem(s) 11 Hem twisted, pleated and/or puckered þ ¨

12 Trousers Hem(s) 12 Irregular in width ¨ þ

13 Trousers Hem(s) 13 Not finished as specified þ ¨

14 Trousers Cleanliness 14 Any spot and/or stain on outside that cannot be completely removed with a clean cloth moistened with water þ ¨

15 Trousers Cleanliness 15 Thread ends on the outside of the garment ¨ þ

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

9/5/2025 Page 35 of 41

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

16 Trousers Labels 16 Omitted þ ¨

17 Trousers Labels 17 Label text incorrect, incomplete and/or illegible (smeared or bleeding) þ ¨

Additional defects Part NOS Defect Major Minor

1 Material and Components 01 Thread color or type not as specified. ¨ þ

2 Material and Components 02 Metallized material warping; Coating uneven and

- Visual Defect ¨ þ

3 03 Metallized material warping; Coating uneven and

- Functional Defect þ ¨

4 Material and Components 03 Material incorrect, not as specified. þ ¨

5 Cleanliness 04 Any size or shade markings or residue on outside. ¨ þ

6 Construction, Assemby and Workmanship 05 Elastic warped; poor recovery causing hem not to gather. þ ¨

7 Material and Components 06 Label causes damage to the item. þ ¨

8 Construction, Assemby and Workmanship 07 Sleeve lengths vary by more than 3/4". þ ¨

9 Construction, Assemby and Workmanship 08 Bartacks not serving the intended purpose. þ ¨

10 Material and Components 09 Any component not as specified. þ ¨

11 Material and Components 10 Any component part twisted, distorted, pleated, misshaped or tight. þ ¨

12 Material and Components 11 Fullness creating unwanted permanent, fold, pleat, crease in fabric or garment. ¨ þ

13 Construction, Assemby and Workmanship 12 Seam irregular, twisted, pleated or wavy. þ ¨

14 Construction, Assemby and Workmanship 13 Seam puckered, longer than 1/4". þ ¨

15 Construction, Assemby and Workmanship 14 End of stitching not back stitched or caught in other seams as required. þ ¨

16 Construction, Assemby and Workmanship 15 Thread break secured by stitching back on the break less than 1/2". ¨ þ

17 Construction, Assemby and Workmanship 16 End of continuous line of stitching overlapped less than 1/2". ¨ þ

18 Construction, Assemby and Workmanship 17 Gauge of stitching and seam allowance irregular or not within range specified, or varies more than 1/16" when no range is specified. þ ¨

19 Construction, Assemby and Workmanship 18 Edge or raised stitching sewn too close to edge, resulting in damage to cloth. þ ¨

20 Construction, Assemby and Workmanship 19 One or more broken stitches or two or more continuous skipped or run-off stitches on joining seam. þ ¨

21 Construction, Assemby and Workmanship 20 Raw edges (more than 1/2"). þ ¨

9/5/2025 Page 36 of 41

Additional defects Part NOS Defect Major Minor

22 Construction, Assemby and Workmanship 21 Stitch tension resulting in loose seams (up to ½”). ¨ þ

23 Construction, Assemby and Workmanship 22 Stitch tension resulting in loose seams (more than ½”). þ ¨

24 Construction, Assemby and Workmanship 23 Tight tension (stitches break when normal strain is applied in the direction of the seam or stitching. þ ¨

9/5/2025 Page 37 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

General Statement - Packaging

Defense Logistics Agency (DLA) Troop Support For acquisition purposes, the packaging requirements shall be as specified in the contract or order. When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activities within the Military Service or Defense Agency, or within the military service’s system commands. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

2 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

Additional Packaging General Statements Category Description Detail Statement

9/5/2025 Page 38 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement comments

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

3 Figures General Statement Disclaimer When inconsistencies exist between the written specification and the figures, the written specification shall govern.

Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

7 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

8 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

9 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

9/5/2025 Page 39 of 41

Description All-Range Tactical Clothing (ARTC) - Extreme Cold Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Known Sources Others Product Code Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Known Sources Material Product Code…