Attachment 1 (L6) - AR-ETP-25-100_ARTC Cold Wet Trouser_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

Style# AR-ETP-25-100

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This covers the requirements for a waterproof, extreme cold/wet weather trouser, which serves as a layer of the All Range Tactical Clothing System (ARTC).

Design trousers for cold wet environment

Size & Length

9/5/2025 Page 1 of 37

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

Size & Length

9/5/2025 Page 2 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-25-206 100% Nylon Laminate - PTFE

Shell Reinforcements;

Reinforcements for Snaps 1"x1"x6

Multi Layer Laminated

Nylon 100

AR-MTP-25-207 Three-layer Knit Laminate Facing Multi Layer Laminated

AR-MTP-24-158 330D Nylon 5.5oz/yd^2 Knee Woven

Nylon 100

AR-MTP-25-200 Adhesive Sheet - 2 Layer

Zippers, Zipper Garage, Belt Loops, Center Front Snap

Flap

Non Woven

AR-MTP-24-143 Lightweight Non-fusible Interlining Fly Side Zipper Placket Non Woven

AR-MTP-25-201 3 Layer Seam Seal Tape Reinforcement Patches Non Woven

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

Materials and Components

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

9/5/2025 Page 3 of 37

Label Image/Sketch Product Code Description Material Comments

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 2 40 inches Side Zipper A-A-55634 Type III Grades and Alters - see pattern

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 1 9 inches Fly A-A-55634 Type III Grades and Alters - see pattern

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 2 10 inches Front Pocket A-A-55634 Type III Grades see pattern

AR-CTP-25-265 Cord, Zipper Thong 4 7.5 inches, finishes at 2-3/4 inches Zipper Pull - Side Opening A-A-55634C Sear Ends

AR-CTP-25-265 Cord, Zipper Thong 1 7.5 inches, finishes at 2-3/4 inches Zipper Pull - Center Front A-A-55634C Sear Ends

AR-CTP-25-265 Cord, Zipper Thong 2 7.5 inches, finishes at 2-3/4 inches Zipper Pull - Pocket A-A-55634C Sear Ends

AR-CTP-24-152 Elastic 1.5" Width 1 7.75 inches Waist Band MIL-W-5664 Type II Class 1

AR-CTP-24-199 Nylon tape 3/8" width 4 3 inches finishes at 1.25 inches Side Hem Stirrups MIL-DTL-5038 Type III Sear Ends

AR-CTP-24-208 Snaps (Male Part), No Gloss 3 Style 2 Front Waistband (1) Side Hem Opening (2)

MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 3 Style 2 Front Waistband (1) Side Hem Opening (2)

MIL-DTL-10884 Style 2A Finish

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord All Top Stitch, All Seams A-A-59826 Type III Class A

9/5/2025 Page 4 of 37

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-113 Bar Code Label/Tag Paper

AR-CTP-24-115 Identification and care label

Artwork

Image/Sketch ProductCode Description Artwork type Comments

9/5/2025 Page 5 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-25-206 100% Nylon Laminate - PTFE Shell Reinforcements; Reinforcements for Snaps 1"x1"x6

0001 | Army OCP Print |

AR-MTP-25-207 Three-layer Knit Laminate Facing 499 | Tan |

AR-MTP-24-158 330D Nylon 5.5oz/yd^2 Knee 0001 | Army OCP Print |

AR-MTP-25-200 Adhesive Sheet - 2 Layer Zippers, Zipper Garage, Belt Loops, Center Front Snap Flap

AR-MTP-24-143 Lightweight Non-fusible Interlining Fly Side Zipper Placket WHT | White |

AR-MTP-25-201 3 Layer Seam Seal Tape Reinforcement Patches 499 | Tan |

Component-Colors

Colorways Color Family Color Image/Swatch (Ref)L (Ref)A (Ref)B Comments

Camouflage | 0001 | Army OCP Print |

Colors

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

9/5/2025 Page 6 of 37

Label - Colors Image/Sketch Product Code Description

AR-CTP-24-113 Bar Code Label/Tag

AR-CTP-24-115 Identification and care label

Image/Sketch Product Code Description Colorway1

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 499 | Tan |

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 499 | Tan |

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 499 | Tan |

AR-CTP-25-265 Cord, Zipper Thong 499 | Tan |

AR-CTP-25-265 Cord, Zipper Thong 499 | Tan |

AR-CTP-25-265 Cord, Zipper Thong 499 | Tan |

AR-CTP-24-152 Elastic 1.5" Width 2414 | White |

AR-CTP-24-199 Nylon tape 3/8" width 499 | Tan |

AR-CTP-24-208 Snaps (Male Part), No Gloss 499 | Tan |

AR-CTP-24-207 Snaps (Female Part), No Gloss 499 | Tan |

AR-CTP-24-181 Thread, Nylon, Bonded, Monocord 499 | Tan |

9/5/2025 Page 7 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

9/5/2025 Page 8 of 37

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

9/5/2025 Page 9 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_09-CENTER-BACK-WAISTBAN

D CENTER BACK WAISTBAND 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-SIDE-BACK-WB SIDE BACK WAISTBAND 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRONT-LOWER-BOTTOM FRONT LOWER BOTTOM 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-BACK-LOWER BACK LOWER 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRONT-RIGHT FRONT RIGHT 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRT-PKT-TOP FRONT POCKET TOP 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-LEFT-SIDE-FRONT-WB LEFT SIDE FRONT WAISTBAND 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-RIGHT-SIDE-FRONT-WB RIGHT SIDE FRONT WAISTBAND 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-GRG-FCG GARAGE FACING 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-GUSSET GUSSET 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-BACK-UPPER BACK UPPER 2 100% Nylon Laminate - PTFE (A) Shell

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

9/5/2025 Page 10 of 37

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_09-BELT-LOOPS BELT LOOPS 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-SIDE-ZIP-OUTER-GUARD SIDE ZIPPER OUTER GAURD 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-ZIP-GRD-SD ZIPPER GUARD SIDE 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-ZIP-GRD-FRT ZIPPER GUARD FRONT 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRONT-LOWER-TOP FRONT LOWER TOP 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRONT-LOWER-TOP FRONT LOWER TOP 2 330D Nylon 5.5oz/yd^2 (R) Reinforcement

PD25_09-FRONT-LEFT FRONT LEFT 1 100% Nylon Laminate - PTFE (A) Shell

PD25_09-FRONT-POCKET FRONT POCKET 2 100% Nylon Laminate - PTFE (A) Shell

PD25_09-LEFT-FLY LEFT FLY 1 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-SD-ZIP-IN-GRD SIDE ZIPPER INNER GAURD 2 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-SIDE-BK-WB-LIN SIDE BACK WAISTBAND LINING 2 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-FRONT-LEFT-PATCH FRONT LEFT PATCH 1 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-FRONT-LEFT-PATCH FRONT LEFT PATCH 1 Adhesive Sheet - 2 Layer (B) Adhesive

PD25_09-FRONT-MIDDLE FRONT MIDDLE 2 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-RIGHT-SD-WB-LINING RIGHT SIDE WAISTBAND LINING 1 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-LEFT-WB-FACING LEFT WAISTBAND FACING 1 Three-layer Knit Laminate (C) Knit Laminate

PD25_09-LEFT-WB-FCG-FLY-RNF LEFT WAISTBAND FACING FLY

REINFORCEMENT 1 3 Layer Seam Seal Tape (E) Seam Seal

PD25_09-FLY-ZIP-BTM-PATCH FLY ZIPPER BOTTOM PATCH 1 3 Layer Seam Seal Tape (E) Seam Seal

PD25_09-SIDE-ZIPPER-TOP-PATCH SIDE ZIPPER TOP PATCH 1 3 Layer Seam Seal Tape (E) Seam Seal

PD25_09-LEFT-FLY-ADH LEFT FLY ADHESIVE 1 Adhesive Sheet - 2 Layer (B) Adhesive

PD25_09-LEFT-WB-ADH LEFT WAISTBAND ADHESIVE 1 Adhesive Sheet - 2 Layer (B) Adhesive

PD25_09-RGT-WB-SNAP-RNF RIGHT WAISTBAND SNAP REINFORCEMENT 1 330D Nylon 5.5oz/yd^2 (R) Reinforcement

PD25_09-GRG-ADH GARAGE ADHESIVE 2 Adhesive Sheet - 2 Layer (B) Adhesive

PD25_09-SD-ZIP-ADH SIDE ZIPPER ADHESIVE 2 Adhesive Sheet - 2 Layer (B) Adhesive

PD25_09-SNAP-RNF SNAP REINFORCEMENT 6 330D Nylon 5.5oz/yd^2 (R) Reinforcement

9/5/2025 Page 11 of 37

Pattern Support Details Pattern Name Piece Part Cut Part Comments Image

PD25_09-BACK-ELASTIC-T

MP

BACK ELASTIC TEMPLATE 0 (T) TEMPLATE

9/5/2025 Page 12 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

9/5/2025 Page 13 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Construction Images

9/5/2025 Page 14 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Construction Details Construction Area / Location Description Requirement Image Number

INSERT

Waistband WAISTBAND SEW WAISBAND FRONT & BACK

SIDE

Fly FLY FLY BEMIS HOT SEAL M/C

9/5/2025 Page 15 of 37

Construction Details Construction Area / Location Description Requirement Image Number

SEAMSEAL TAPE

TAPE

SEAMSEAL TAPE

9/5/2025 Page 16 of 37

Construction Details Construction Area / Location Description Requirement Image Number

TOPSTITCH

4. SEW BACK SIDE ZIPPER

TOPSTITCH

TAPE

TAPE

WAISTBAND

20. SET FRONT RIGHT ZIPPER

TOPSTITCH

SEAMSEAL TAPE

25. FRONT RIGHT FLY & RISE

SEAMSEAL TAPE

ELASTIC

28. SEW WAISTBAND CLOSE

HEM)

7. SET STUD SNAP ( CF WB/BOTTOM

HEM)

8. SET SOCKET SNAP ( CF

WB/BOTTOM HEM)

9/5/2025 Page 17 of 37

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

Trouser belt loops 7/8 37 STITCHES/TACK 14 þ ¨

Trouser suspender loops (on straight) 3/8 37 STITCHES/TACK 8 þ ¨

Trouser suspender loops (angled) 3/8 37 STITCHES/TACK 8 ¨ ¨ Angled

Trouser side zipper top 3/4 29 STITCHES/TACK 4 ¨ þ

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

Joining seams (without topstitch)

301 SSa 9-11

Joining seams:

rise, gusset, inseam

301 LSq-1 9-11 1/8 (+/- 1/32) from finished edge

Side zippers 301 SSs-1 SSs-1/SSj-1 9-11 1/8 (+/- 1/32) from finished edge

Zipper guards 301 SSae-1 9-11 1/8 (+/- 1/32) from finished edge

Hem 301 SSp-1 1" hem 9-11

Attaching waistband

301 LSbc-2 edgestitch 1/8" from finished edge 9-11 1/8 (+/- 1/32) from finished edge

J-stitch 301 LSbj-1 9-11

Belt loops 301 EFp-1 and EFp-2

EFp-2 9-11 3/4" gauge

Front pocket darts

301 OSf-1 9-11 1/8 (+/- 1/32) from seam

Construction Details Secondary Construction Area / Location Description Requirement Image

9/5/2025 Page 18 of 37

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

Trouser side zipper bottom 3/8 37 STITCHES/TACK 4 ¨ þ

Trouser Front pocket zipper side 5/8 29 STITCHES/TACK 4 ¨ þ

Trouser Front pocket pleats 3/8 29 STITCHES/TACK 8 þ ¨

Trouser Fly zipper bottom 3/8 37 STITCHES/TACK 1 þ ¨

Trouser Fly zipper side 3/8 37 STITCHES/TACK 1 ¨ þ

9/5/2025 Page 19 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

9/5/2025 Page 20 of 37

Grade Rules

Code Point of Measure How To Measure Base Tol XX Small

X Small Small Mediu m Large X Large

XX

Large

¨ L7B03 RELAXED WAIST - ON HALF (Long) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 17 1/2 1/2 0 0 2 0 2 2 2

¨ L7B02 RELAXED WAIST - ON HALF (Regular) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 17 1/2 1/2 0 2 2 0 2 2 2

¨ L7B04 RELAXED WAIST - ON HALF (XLong) MEASURED STRAIGHT FROM INNER FOLD EDGE TO EDGE 21 1/2 1/2 0 0 0 0 0 0 2

¨ 1 RELAXED WAIST (ON HALF) (Short) Measurement taken straight from inner part of folded finished top edge to edge at outseam location of waistband (relaxed)

17 1/2 1/2 0 2 2 0 2 0 0

¨ L6B03 Extended Waist - On Half (Long) ELASTIC STRETCHED (FABRIC FLAT) / FOLD EDGE TO EDGE

/ STRAIGHT 22 1/2 0 0 2 0 2 2 2

¨ L6B02 Extended Waist - On Half (Regular) ELASTIC STRETCHED (FABRIC FLAT) / FOLD EDGE TO EDGE

/ STRAIGHT 22 1/2 0 2 2 0 2 2 2

¨ L6B01 Extended Waist - On Half (Short) ELASTIC STRETCHED (FABRIC FLAT) / FOLD EDGE TO EDGE

/ STRAIGHT 22 1/2 0 2 2 0 2 0 0

¨ L6B04 Extended Waist - On Half (XLong) ELASTIC STRETCHED (FABRIC FLAT) / FOLD EDGE TO EDGE

/ STRAIGHT 26 1/2 0 0 0 0 0 0 2

¨ 2 WAIST BAND HEIGHT (AT OUTSEAM, CF AND

CB)

Measurement taken from finished top edge of waistband to waist seam at outseam, CF and CB 1 3/4 1/8 0 0 0 0 0 0 0

¨ D0037.1e Front Rise Waist at Top, to Gusset Seam at Top Long

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

10 1/4 0 0 1/2 0 1/2 1/2 1/2

¨ D00371.d Front Rise Waist at Top, to Gusset Seam at Top Regular

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

9 1/2 1/4 0 1/2 1/2 0 1/2 1/2 1/2

¨ D0037.1c Front Rise Waist at Top, to Gusset Seam at Top Short

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

9 1/4 0 1/2 1/2 0 1/2 0 0

¨ D0037.1f Front Rise Waist at Top, to Gusset Seam at Top XLong

Lay garment so rise is flat, measure the distance along the seam from front at top of gusset seam, to top of waist edge

11 1/2 1/4 0 0 0 0 0 0 1/2

¨ L7B11 THIGH WIDTH - ON HALF (Long) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 15 3/8 0 0 1 0 1 1 1

Department of Defense Clothing and Textiles

Style# AR-ETP-25-100

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Grade Rule Size Range Alpha Sizes XXS-4XL | Fit Type

Selected Sizes XX Small|X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

9/5/2025 Page 21 of 37

Grade Rules

Code Point of Measure How To Measure Base Tol XX Small

X Small Small Mediu m Large X Large

XX

Large

¨ L7B10 THIGH WIDTH - ON HALF (Regular) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 15 3/8 0 1 1 0 1 1 1

¨ L7B09 THIGH WIDTH - ON HALF (Short) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 15 3/8 0 1 1 0 1 0 0

¨ L7B12 THIGH WIDTH - ON HALF (XLong) MEASURED STRAIGHT FROM SEAM TO SEAM AT MIDDLE

OF 2 KNEE DARTS 17 3/8 0 0 0 0 0 0 1

¨ L6B07 KNEE WIDTH - ON HALF (Long) KNEE DART @ SIDE SEAM / FOLD EDGE TO EDGE /

STRAIGHT 9 1/2 3/8 0 0 1 0 1 1 1

¨ L6B06 KNEE WIDTH - ON HALF (Regular) KNEE DART @ SIDE SEAM / FOLD EDGE TO EDGE /

STRAIGHT 9 1/2 3/8 0 1 1 0 1 1 1

¨ L6B05 KNEE WIDTH - ON HALF (Short) KNEE DART @ SIDE SEAM / FOLD EDGE TO EDGE /

STRAIGHT 9 1/2 3/8 0 1 1 0 1 0 0

¨ L6B08 KNEE WIDTH - ON HALF (XLong) KNEE DART @ SIDE SEAM / FOLD EDGE TO EDGE /

STRAIGHT 11 1/2 3/8 0 0 0 0 0 0 1

¨ D0042.1e Back Rise Waist at Top, to Gusset Seam at Top Long

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 10 1/2 1/4 0 0 1/2 0 1/2 1/2 1/2

¨ D0042.1d Back Rise Waist at Top, to Gusset Seam at Top Regular

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 10 1/4 0 1/2 1/2 0 1/2 1/2 1/2

¨ D0042.1c Back Rise Waist at Top, to Gusset Seam at Top Short

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 9 1/2 1/4 0 1/2 1/2 0 1/2 0 0

¨ D0042.1f Back Rise Waist at Top, to Gusset Seam at Top XLong

Lay garment so rise is flat, measure the distance along the seam from back gusset seam at top to waist edge 12 1/4 0 0 0 0 0 0 1/2

¨ L7B17 GUSSET WIDTH AT CROTCH MEASURED STRAIGHT FROM INTERSECTION AT FRONT

RISE SEAM TO INTERSECTION AT BACK RISE SEAM 6 5/8 1/4 0 0 0 0 0 0 0

¨ L7B25 LEG OPENING RELAXED - ON HALF (Long) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 9 3/4 1/4 0 0 1/2 0 1/2 1/2 1/2

¨ L7B24 LEG OPENING RELAXED - ON HALF (Regular) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 9 3/4 1/4 0 1/2 1/2 0 1/2 1/2 1/2

¨ L7B23 LEG OPENING RELAXED - ON HALF (Short) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 9 3/4 1/4 0 1/2 1/2 0 1/2 0 0

¨ L7B26 LEG OPENING RELAXED - ON HALF (XLong) MEASURED STRAIGHT FROM FOLDED EDGE TO EDGE 10 3/4 1/4 0 0 0 0 0 0 1/2

¨ D0050.1e Outseam Top Waist Edge to Hem Long Along outseam from top of waist edge to bottom hem opening 45 1/2 0 0 1/2 0 1/2 1/2 1/2

¨ D0050.1d Outseam Top Waist Edge to Hem Regular Along outseam from top of waist edge to bottom hem opening 43 1/2 0 1/2 1/2 0 1/2 1/2 1/2

¨ D0050.1c Outseam Top Waist Edge to Hem Short Along outseam from top of waist edge to bottom hem opening 41 1/2 0 1/2 1/2 0 1/2 0 0

¨ D0050.1f Outseam Top Waist Edge to Hem XLong Along outseam from top of waist edge to bottom hem opening 48 1/2 0 0 0 0 0 0 1/2

¨ L7B21 FRONT INSEAM LENGTH (Long) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 33 1/4 1/2 0 0 0 0 0 0 0

¨ L7B20 FRONT INSEAM LENGTH (Regular) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 31 3/4 1/2 0 0 0 0 0 0 0

¨ L7B19 FRONT INSEAM LENGTH (Short) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 30 1/4 1/2 0 0 0 0 0 0 0

¨ L7B22 FRONT INSEAM LENGTH (XLong) MEASURED ALONG SEAM FROM INTERESCTION OF

GUSSET SEAM @ FRONT INSEAM TO BOTTOM HEM EDGE 34 3/4 1/2 0 0 0 0 0 0 0

Additional TOFM Details

9/5/2025 Page 22 of 37

Code Point Of Measure How to Measure Tol Base Size Grade

9/5/2025 Page 23 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Inspection Conditions General Statement General Statement Unless otherwise specified in the contract inspections shall be performed in accordance with the test conditions specified in applicable test method documents and as specified by the inspection methods.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/5/2025 Page 24 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/5/2025 Page 25 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes, fill %|Percentage Maximum 2.5 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 50 washes, warp %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 100 washes, fill %|Percentage Maximum 2.5 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 100 washes, warp %|Percentage Maximum 3.5 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-g uidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?pa ge=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

9/5/2025 Page 26 of 37

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Sealed Seams The seam tape shall be launderable and shall prevent water leakage through seams and stitching. Seam tape shall be applied only to the inside of the end item.

Tape shall be cut 7/8-inch to 1-inch wide strips from material that is compatible with the back side of cloth specified in Table I. The shade of the tape shall approximate the back of the basic cloth.

ASTM International ASTM D751 Standard Test Method for Coated Fabrics

Tests shall be run on the finished trousers at five

(5) different seam locations as follows: one (1) on each top seam of knee patch, one (1) on each leg seam, and one (1) on seat seam. The five (5) determinations shall be reported separately as "pass" or "fail". More than one (1) area of the five

(5) test areas on each trouser showing leakage shall constitute a failure.

Sealed Seams Hydrostatic Resistance After Laundering

No Leakage ASTM International ASTM D751 Standard Test Method for Coated Fabrics

From production lots when specified, units shall be randomly selected for five (5) launderings in accordance with the laundering procedure below.

The units shall be visually examined and then tested for hydrostatic resistance as specified in ASTM D751, Procedure B, Procedure 2, after the fifth laundering cycle.

Sealed Seams Hydrostatic Resistance No Leakage ASTM International ASTM D751 Standard Test Method for Coated Fabrics

ASTM D751, Procedure B, Procedure 2 shall be utilized to determine if the seams are resistant to leakage at a fixed hydrostatic head pressure of 50 centimeters for three (3) minutes. The hydrostatic pressure shall be applied to the outside or face of the garment. Leakage is defined as the appearance of water at three (3) or more different places or the continuous flow of water through the material or seams at one (1) or more different places within the 4-1/2-inch diameter test area.

Sealed Seams End Item Laundering for sealed seam test

Prior to laundering, one (1) trouser shall be retained for use as the unlaundered sample in evaluating the trousers after laundering. Place two

(2) end items, (one (1) end item may be ballast) (approximately 4 pounds total load), in an automatic washing machine set on permanent press cycle, high water level and warm 100°F (+ 10°F, - 0°F) wash temperature. If seams are taped sealed, then taped areas of the end item shall be visually examined prior to laundering for physical surface appearance characteristics and initial tape end and integrity conditions. The slide, hook/loop and snap fasteners of each end item shall be closed with the right side of each end item out during the wash and drying cycles. Place 28 grams of detergent conforming to 1993 AATCC Standard Reference Detergent (non-phosphate) without optical brighteners into the washer. The duration of each laundering cycle shall be 30 to 35 minutes.

After laundering, place end items in an automatic tumble dryer set on permanent press cycle, high heat setting (150°F -160°F) and run approximately for 45 minutes. Conduct five (5) laundering and drying cycles. After the fifth laundering and drying cycle, test and evaluate the end items for conformance to the required characteristics in this table. The laundering equipment (washer and dryer) shall be in accordance with AATCC-135.

9/5/2025 Page 27 of 37

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Sealed Seams Appearance After Laundering

ASTM International ASTM D751 Standard Test Method for Coated Fabrics

a. After five (5) laundering cycles, the trouser shall be examined for any sign of tape ends lifting, within 3/4-inch of sewn seam; tape ends lifting more than 1/8-inch when tape extends beyond 3/4-inch of the sewn seam, tape curling, bubbling, separation along tape edges or across the tape width, or tape outer layer more than 1/8-inch. The occurrence of any of these defects shall be considered a test failure. Tape ends lifting more than 1/8-inch beyond 3/4-inch of the sewn seam shall be tested for hydrostatic resistance in accordance with ASTM D751 Procedure B, Procedure 2. b. Color loss in print areas of camouflage pattern. After five (5) laundering cycles, the color loss shall be determined by comparing the laundered and unlaundered samples. Any color change on any area of the trouser less than the required rating on the AATCC Gray Scale for evaluating change in color shall be considered a test failure. Any physical surface appearance characteristic noted in a taped area on the unlaundered sample shall not be considered a test failure on the laundered trouser if there is no adverse change in the characteristic. Puckering and creases within taped areas, not adversely affecting appearance shall not be considered a test failure. c. Physical surface appearance changes of the basic shell material. After five (5) laundering cycles, the camouflage face side of the end item shall be visually examined on all visible pattern parts for any evidence of physical surface appearance changes as unlaundered sample. Any physical surface appearance change shall be considered a test failure. Any physical surface appearance characteristic noted in a taped area on the unlaundered end item, if seams are tape sealed, shall not be considered a test failure on the laundered end item if there is no adverse change in the characteristic. Puckering and creases within taped areas, not adversely affecting appearance shall not be considered a test failure.

9/5/2025 Page 28 of 37

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C

9/5/2025 Page 29 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/5/2025 Page 30 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

1 Trousers Material 01 Hole, cut, tear, smash, burn, drill hole, run, needle chew, abrasion damaging the fabric, affecting appearance or serviceability þ ¨

2 Trousers Cutting 02 Any component part not cut in accordance with specified directional lines, twill lines and/or fabric grain not parallel between parts þ ¨

3 Trousers Components 03 Component omitted þ ¨

4 Trousers Components 04 Component bent, broken, cracked, torn, cut, twisted, folded or scratched þ ¨

5 Trousers Stitching and Seaming 05 Omitted þ ¨

6 Trousers Stitching and Seaming 06 Seam and/or stitch type not as specified þ ¨

7 Trousers Bartacks 07 Omitted þ ¨

8 Trousers Bartacks 08 Loose and or tight stitch tension ¨ þ

9 Trousers Sleeve and armholes 09 Sleeves reversed þ ¨

10 Trousers Sleeve and armholes 10 Sleeves tight, causing pleat and/or excessive puckers on front, back and/or sleeve ¨ þ

11 Trousers Labels 11 Label text incorrect, incomplete and/or illegible (smeared or bleeding) þ ¨

12 Trousers Labels 12 Omitted þ ¨

13 Trousers Hem(s) 13 Not finished as specified þ ¨

14 Trousers Hem(s) 14 Hem twisted, pleated and/or puckered þ ¨

15 Trousers Hem(s) 15 Irregular in width þ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

9/5/2025 Page 31 of 37

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

16 Trousers Cleanliness 16 Any spot and/or stain on outside that cannot be completely removed with a clean cloth moistened with water ¨ ¨

17 Trousers Cleanliness 17 Thread ends on the outside of the garment ¨ ¨

Additional defects Part NOS Defect Major Minor

1 Material and Components 01 Incorrect, not as specified. þ ¨

2 Material and Components 02 Knots greater than Fabric Defect Scale Level C. ¨ þ

3 Material and Components 03 Slubs greater than Fabric Defect Scale Level D. ¨ þ

4 Construction, Assemby and Workmanship 04 Any component or part omitted (unless classified herein). þ ¨

5 Material and Components 05 Any component not as specified. þ ¨

6 Material and Components 06 Any component part twisted, distorted, pleated, misshaped or tight. þ ¨

7 Construction, Assemby and Workmanship 07 Fullness creating unwanted permanent, fold, pleat, crease in fabric or garment. ¨ þ

8 Material and Components 08 Elastic warped; poor recovery causing back waist not to gather ¨ þ

9 Material and Components 09 Zipper ends not secured. þ ¨

10 Material and Components 10 Thread color or type not as specified. ¨ þ

11 Construction, Assemby and Workmanship 11 Seam irregular, twisted, pleated, or wavy þ ¨

12 Construction, Assemby and Workmanship 12 Seam puckered (longer than ¼”) þ ¨

13 Construction, Assemby and Workmanship 13 Any part of the shirt caught in an unrelated stitching. ¨ þ

14 Construction, Assemby and Workmanship 14 End of stitching not back stitched or caught in other seams as required. þ ¨

15 Construction, Assemby and Workmanship 15 Thread break secured by stitching back on the break less then ½". ¨ þ

16 Construction, Assemby and Workmanship 16 End of continuous line of stitching overlapped less than 1/2". ¨ þ

17 Construction, Assemby and Workmanship 17 Gauge of stitching and seam allowance irregular or not within range specified, or varies more than 1/16" when no range is specified. þ ¨

18 Construction, Assemby and Workmanship 18 Edge or raised stitching sewn too close to edge, resulting in damage to cloth. þ ¨

19 Construction, Assemby and Workmanship 19 One or more broken stitches or two or more continuous skipped or run-off stitches on joining seam. þ ¨

20 Construction, Assemby and Workmanship 20 Raw edges (more than 1/2"). þ ¨

21 Construction, Assemby and Workmanship 21 Stitch tension resulting in loose seams (up to ½”). ¨ þ

22 Construction, Assemby and Workmanship 22 Stitch tension resulting in loose seams (more than ½”). þ ¨ 9/5/2025 Page 32 of 37

Additional defects Part NOS Defect Major Minor

23 Construction, Assemby and Workmanship 23 Tight tension (stitches break when normal strain is applied in the direction of the seam or stitching. þ ¨

24 Construction, Assemby and Workmanship 24 Sleeve lengths vary by more than 3/4". þ ¨

25 Material and Components 25 Label causes damage to the item. þ ¨

26 Cleanliness 26 Any size or shade markings or residue on outside. ¨ þ

27 Construction, Assemby and Workmanship 27 Sem Seal disengaging þ ¨

9/5/2025 Page 33 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

General Statement - Packaging

Defense Logistics Agency (DLA) Troop Support For acquisition purposes, the packaging requirements shall be as specified in the contract or order. When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activities within the Military Service or Defense Agency, or within the military service’s system commands. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

2 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

Additional Packaging General Statements Category Description Detail Statement

9/5/2025 Page 34 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement comments

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

3 Figures General Statement Disclaimer When inconsistencies exist between the written specification and the figures, the written specification shall govern.

Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

7 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

8 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

9 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

9/5/2025 Page 35 of 37

Description All Range Tactical Clothing (ARTC) - Cold Wet Trouser

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Legwear |

Size Range Alpha Sizes XXS-4XL |

Known Sources Others Product Code Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Known Sources Material Product Code Vendor Material Name Comments

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

NSN

Size

Additional Notes

Item Details Intended End Use

Keyword listing

Comments

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian