Attachment 1 (L6) - AR-MTP-24-158_330D Nylon 5.5 oz_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

RM # AR-MTP-24-158

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Year 2024

RM Status

Size Range zRM - Rolled Goods |

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

General Statements - Scope Category Description Statements

Approved Use All Departments and Agencies General Statement This document is approved for use by all Departments and Agencies of the Department of Defense (DoD).

Classification Material General Statement The fabric(s) shall be of the following types, classes and styles as specified in the contract..

Scope

9/4/2025 Page 1 of 16

Fabric# AR-MTP-24-158

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Style Colors Color Swatch (Ref)L (Ref)A (Ref)B Comments

0001 | Army OCP Print |

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colors

9/4/2025 Page 2 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Material Construction GS Tab Category Description Detail Statements

Construction Workmanship Material General Statement General Statement The finished material shall be uniform, and the occurrence of defects, shall not exceed the established Acceptance Quality Limits (AQL) in the contract and shall not adversely affect the serviceability, appearance, and uniformity of the product.

Construction General Statement - Construction

Material and Component Material and component construction shall conform to the requirements specified as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished material meets the physical requirements and appearance as those produced by following the sequence of operations.

Material Construction

Yarn Ply

Yarn Details

Fiber Percentage Yarn 1 Yarn 100 Nylon

Total Composition Nylon 100

Fiber Percentage Yarn 2 Yarn

Total Composition B

Fiber/Yarn/Additional Details The yarn shall be textured continuous filament nylon with a count of 330 denier.

Woven Information

Weave Type Plain Weave

Warp Count 58

Knit Information

Knit Type

Gauge

General Information

Fabric Weight 5.5

UOM Oz/yd2|Ounces per square yard

9/4/2025 Page 3 of 16

Additional Construction Details Image Description

Material Finish / Treatment Material Finish / Treatment Additional Details

Water Repellent

Width 60

UOM

Thickness (inches)

Appearance/Hand

Wales

Courses

Weft Count 38

Shinkage Length 0

UOM

Shirinkage Width 0

UOM

9/4/2025 Page 4 of 16

Style# AR-MTP-24-158

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Style Status

Platform

Environment

End Use

Gender

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Inspection Conditions General Statement General Statement Unless otherwise specified in the contract inspections shall be performed in accordance with the test conditions specified in applicable test method documents and as specified by the inspection methods.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Conformance Inspection Material and Component Acceptance Criteria The lot shall be unacceptable if the number of defects exceeds the Acceptable Quality Limits (AQL) or the failure of any test.

Conformance Inspection Material and Component Sampling Unless otherwise specified in subsidiary specifications, referenced documents, or procurement documents material and component sampling shall be (2) sample units for lots 800 yards of less, (3) sample units for lots 801 yards to 22,000 yards and (4) sample units for lots over 22,000 yards. For material testing, the sample unit shall be 5 continuous yards full width of the finished cloth for all physical and chemical tests.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

Additional Quality General Statements Category Description Detail Statement

9/4/2025 Page 5 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Fiber Identification Each roll of finished cloth shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations Under the Textile Fiber Products Identification Act.

American Association of Textile Chemist and Colorists (AATCC)

AATCC TM20|Fiber Analysis:

Qualitative|3363|

Spectral Reflectance Shall meet the requirements for the Operational Camouflage Pattern.

Department of Defense - Internal ITP4|Spectral Reflectance |3363|

Weight Oz/yd2|Ounces per square yard Maximum 5.5 ASTM International ASTM D3776 / D3776M|Standard Test

Methods for Mass Per Unit Area (Weight) of Fabric|3363|

Option C

Thread Count warp Maximum 58 ASTM International ASTM D3775|Standard Test Method for

End (Warp) and Pick (Filling) Count of Woven Fabrics|3363|

Thread Count filling Maximum 38 ASTM International ASTM D3775|Standard Test Method for

End (Warp) and Pick (Filling) Count of Woven Fabrics|3363|

Pattern Execution The pattern on the printed finished cloth(s) shall match the standard sample with respect to design, colors, and registration of the respective areas. The various areas of the pattern shall be properly registered in relation to each other and shall present definite sharp demarcations and/or feathering as required for each color.

7 pH - Water Extract not less than 5, or no more than 8

American Association of Textile Chemist and Colorists (AATCC)

AATCC TM81|pH of the Water-Extract from Wet Processed Textiles|3363|

Material Properties and Testing

General Statements - Material Component and Physical Requirements Gs Tab Category Description Detail Statements

Material Properties and Testing

Material Standard Samples General Statement The finished material shall be a good match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/4/2025 Page 6 of 16

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability warp %|Percentage Maximum The finished cloth shall have an average dimensional change of no more than 3.0 percent in the warp and, with no single value over 3.5 percent, after one (1) laundering cycle

American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

Dimensional Stability fill %|Percentage Maximum The finished cloth shall have an average dimensional change of no more than 2.0 percent in the filling directions, with no single value over 2.5 percent, after one (1) laundering cycle

American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

(1), III, (Ai)

Toxicity The finished cloth shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal ITP6|Toxicity|3363| First article testing

Break Strength warp Minimum 200 ASTM International ASTM D5034|Standard Test Method for

Breaking Strength and Elongation of Textile Fabrics (Grab Test)|3363|

Break Strength filling Minimum 155 ASTM International ASTM D5034|Standard Test Method for

Breaking Strength and Elongation of Textile Fabrics (Grab Test)|3363|

Tear Strength warp and fill Minimum 8.0 ASTM International ASTM D1424|Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus|3363|

14 Spray rating Minimum 90, 90, 80 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM22|Water Repellency:

Spray|3363|

15 Dynamic Absorption initial Maximum 25 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM70|Water Repellency-Tumble Jar Dynamic Absorption|3363|

First article testing

Yarn number denier 330 ASTM International ASTM D1907 / D1907M|Standard Test

Method for Linear Density of Yarn (Yarn Number) by the Skein Method|3363|

Weave The weave shall be plain with one (1) up and one (1) down visual

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

9/4/2025 Page 7 of 16

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

1 Colorfastness - Laundering

- Staining visual rating Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM61|Colorfastness to Laundering: Accelerated|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

2 Colorfastness - Laundering

- Color Change visual rating Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM61|Colorfastness to Laundering: Accelerated|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

Colorfastness - Light visual rating Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM16.3|Colorfastness to Light:

Xenon-Arc|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

First article testing

Colorfastness - Perspiration - Color Change - Acid and Alkaline visual rating Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP1 Evaluation Procedure for Gray Scale for Color Change.

Colorfastness - Perspiration - Staining - Acid and Alkaline visual rating Minimum 3 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM15|Colorfastness to Perspiration|3363|

AATCC EP2 Evaluation Procedure for Gray Scale for Staining.

Colorfastness - Crocking wet and dry Minimum 3.5 American Association of Textile

Chemist and Colorists (AATCC) AATCC TM8|Colorfastness to Crocking:

Crockmeter|3363|

AATCC EP8 Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale

Visual Shade Matching good match to standard sample

American Association of Textile Chemist and Colorists (AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C, with sources simulating artificial daylight D75 illuminant with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles, and shall be a good match to the standard sample under incandescent A illuminant with a color temperature of 2856K. In 2019, Option A of AATCC Evaluation Procedure 9, Visual Assessment of Color Difference of Textiles was changed to Option C.

NOTE: In case of confusion, the viewing geometry should be such that the specimen plane and illumination source are parallel to each other and aligned so that the light flux is incident at the center of the specimen plane, which is set at a 35 (± 5°) angle relative to the horizontal. The observer will view the specimens at a 90° angle, relative to the plane of the specimens.

9/4/2025 Page 8 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Internal Test Procedures

Material Internal Test Procedures Source Test Method Test method options Test method description

Department of Defense - Internal

ITP4|Spectral Reflectance |3363|

Department of Defense - Internal

ITP6|Toxicity|3363| First article testing

9/4/2025 Page 9 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Defects Material Fabric type Defect Type Defect Description Details Major Minor

1 Woven Type I - Solid colors and printed fabrics Any hole, cut, tear, abrasion mark. ¨ ¨

2 Woven Type I - Solid colors and printed fabrics Edge ravels when pulled outward. ¨ ¨

3 Woven Type I - Solid colors and printed fabrics Broken or missing yarn. ¨ ¨

4 Woven Type I - Solid colors and printed fabrics Any spot, stain or streak more than 1-inch in combined directions. ¨ ¨

5 Woven Type I - Solid colors and printed fabrics Knots greater than Fabric Defect Replica Scale Level C for dress uniforms and D for combat uniforms. ¨ ¨

6 Woven Type I - Solid colors and printed fabrics Slubs greater than Fabric Defect Replica Scale Level E for dress uniforms and F for combat uniforms. ¨ ¨

7 Woven Type I - Solid colors and printed fabrics Color not a good match to reference. ¨ ¨

Woven Type I - Solid colors and printed fabrics Any area of poor dye penetration, streak or shade bar that is

9-inches or less. Defective shade areas that are greater than 9-inches constitute a failure (when applicable).

9 Woven Type I - Solid colors and printed fabrics Width not as specified within a tolerance of less than 1/2-inch. ¨ ¨

10 Woven Type I - Solid colors and printed fabrics Objectionable odor. ¨ ¨

11 Woven Type I - Solid colors and printed fabrics Slack or tight selvages. ¨ ¨

12 Woven Type I - Solid colors and printed fabrics Any embedded foreign matter or uncleanness. ¨ ¨

13 Woven Type I - Solid colors and printed fabrics Edges rolled folded, creases, scalloped or corded, baggy, ridgy or wavy cloth. ¨ ¨

14 Woven Type I - Solid colors and printed fabrics Tackiness (sticky to touch). ¨ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality Material General Statement General Statement The finished material shall be examined and scored for the defects listed.

Additional defects 9/4/2025 Page 10 of 16

Part NOS Defect Major Minor

9/4/2025 Page 11 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

1 Length and put-up Material General Statement General Statement For Government procurements only, unless otherwise specified in the contract, the cloth shall be furnished in continuous lengths, each not less than 40 yards, and each length shall be put-up on a roll

2 Width Material General Statement General Statement For Government procurements only, unless otherwise specified the width of the finished cloth shall be as specified and shall be the minimum acceptable width inclusive of the selvage

3 Roll Identification - Face Material General Statement General Statement The face side of the cloth shall be identified by stamping the face side with the word “FACE” at each end of the roll.

4 Roll Identification - Fiber Material General Statement General Statement Each roll shall be labeled or ticketed for fiber content in accordance with 16 CFR 303

General Statement - Packaging

Defense Logistics Agency (DLA) Troop Support For acquisition purposes, the packaging requirements shall be as specified in the contract or order. When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activities within the Military Service or Defense Agency, or within the military service’s system commands. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

9/4/2025 Page 12 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional General Statements Category Description Detail Statement

1 Non Government Publications

SDL Atlas Document Source Replica set is available for purchase from SDL Atlas Customer Service, 1-803-329-2110

Other Government documents, drawings and publications

Federal Trade Commission Document Source Copies of this document are available online at https://www.ftc.gov/.

Other Government documents, drawings and publications

U.S. Army CCDC SC Document Source Copies of drawings are available from the U.S. Army Combat Capabilities Development Command (CCDC) Soldier Center, ATTN: FCDD-SCP-WC, 10 General Greene Avenue, Natick, MA 01760-5019

General Statements

General Statements Category Description Detail Statement

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Comments, Suggestions or Questions

Defense Logistics Agency (DLA) Troop Support Comments, suggestions, or questions on this document should be addressed: 700 Robbins Street, Philadelphia, PA 19111-5096. Since contact information canchange, verify the currency of the address information using Acquisition Streamlining andStandardization Information System (ASSIST) online database https://assist.dla.mil.

3 Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

4 Non Government Publications

General Statement The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those specified in the solicitation or contract.

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

7 Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Other Government documents, drawings and publications

Environmental Protection Agency (EPA) Document Source Copies of these documents are available online at http://www.epa.gov

9 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

10 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

11 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

9/4/2025 Page 13 of 16

4 Government specifications, standards, and handbooks

Department of Defense Standards Document Source Copies of this document are available online at https://quicksearch.dla.mil.

9/4/2025 Page 14 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Known Sources Material Product Code Vendor Material Name Comments

1 Brookwood | V046 |

Known Sources Others Other Component Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

9/4/2025 Page 15 of 16

Description 330D Nylon 5.5oz/yd^2

MIL/CID Number MIL-DTL-32439

Fabric Status

Print/Solid Print

Fabric Type Woven

Defect Type Type I - Solid colors and printed fabrics

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Item Details Intended End Use

Keyword listing

Comments

NSN

Size

Additional Notes

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian

9/4/2025 Page 16 of 16