Attachment 1 (L5) - AR-ETP-25-094-Softshell Jacket_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

Style# AR-ETP-25-094

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This product covers the requirements for the wind resistant softshell jacket for use in extreme cold weather that is apart of All-Range Tactical Clothing

Design soft shell jacket

Size & Length XX Small / Short

XX Small / Regular

XX Small / Long

XX Small / X Long

X Small / Short

X Small / Regular

X Small / Long

X Small / X Long

Small / Short

Small / Regular

Small / Long

Small / X Long

Medium / Short

Medium / Regular

Medium / Long

Medium / X Long

Large / Short

Large / Regular

Large / Long

Large / X Long

9/4/2025 Page 1 of 44

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

Size & Length X Large / Short

X Large / Regular

X Large / Long

X Large / X Long

XX Large / Short

XX Large / Regular

XX Large / Long

XX Large / X Long

XXX Large / Short

XXX Large / Regular

XXX Large / Long

XXX Large / X Long

XXXX Large / Short

XXXX Large / Regular

XXXX Large / Long

XXXX Large / X Long

9/4/2025 Page 2 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-24-156 Woven Stretch 4-way Outershell main body and elbow reinforcement

Woven

Nylon/Spandex 91/9

AR-MTP-24-157 Twill Weave 4-way Stretch Sleeve inner elbow patch Woven

Nylon/Spandex 91/9

AR-MTP-24-134 Nylon Plain Weave Front lower pocket liner Woven

AR-MTP-24-135 Mesh Inner chest pocket Knit

AR-MTP-24-143 Lightweight Non-fusible Interlining

Center Front Cuff, Cuff tab Shoulder

Pocket Collar Underarm zip guard CF Zip Guard CF Zip

Flap CF Zip Extensions Hood Brim (make sure pattern is Cut 2 to double stiffness)

Non Woven

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

Materials and Components

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

9/4/2025 Page 3 of 44

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-175 IFF Glint Tape 2 3/4 inch IFF Tab at each shoulder pocket

CO-PD-06-05 Type I (constructed to be hidden behind 5038 Type III tape) (CUT 2 at 3/4")

AR-CTP-24-187 Zipper, No. 5, Type III Style 8 1 29.25 inches Center Front A-A-55634 Type III Grades and Alters per Pattern

AR-CTP-24-191 Fastener, Separating, Nonreversible, Zipper, No. 5, Type I, 2 22.75 inches Underarm A-A-55634 Type I

Grades and Alters per Pattern

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 2 9.75 inches Front Pocket A-A-55634 Type I Grades and Alters per Pattern

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 2 7.5 inches Sleeve Pocket A-A-55634 Type I

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7 2 8.25 inches Inner Chest Pocket Opening A-A-55634 Type I

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 2 2 inches Side Waist Flap A-A-55126 Type II Class 1

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width 2 3/4 inch Shoulder

A-A-55126 Type II Class 1 Style A

Trim Sleeve Tab hook, shaped per pattern

AR-CTP-24-167 Nylon Fastener Tape, Hook, 5/8" Width 5 2 inches Front Clouser - Top Stow Collar, Front and Lower Front

A-A-55126 Type II Class 1 Style A

AR-CTP-24-167 Nylon Fastener Tape, Hook, 5/8" Width 1 2 inches Center back Stow Collar A-A-55126 Type II Class 1 Style A

AR-CTP-24-164 Nylon Fastener Tape, Pile, 4" Width 2 6 inches Shoulder Pocket A-A-55126 Class 1 Style A

9/4/2025 Page 4 of 44

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width 1 2 inches Rank - Front Left Flap A-A-55126 Class 1 Style A

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 2 5.25 inches Name Tape A-A-55126 Class 1 Style A

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 2 5 inches Sleeve Cuff A-A-55126 Class 1 Style A

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width 2 3.25 inches Shoulder A-A-55126 Class 1 Style A

AR-CTP-24-262 Nylon Fastener Tape, Pile, 5/8" Width 5 2 inches Front Left Flap A-A-55126 Class 1 Style A

AR-CTP-24-262 Nylon Fastener Tape, Pile, 5/8" Width 1 2 inches Hood Center Back A-A-55126 Class 1 Style A

AR-CTP-24-198 Nylon tape 1" width 2 1.25 inches Hood Facing Eyelet Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 1 inch Inner Pocket Grommet Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 2 inches Hood Eyelet Reinforcement MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 3 4 inches Hood Drawcord Keepers MIL-DTL-5038 Type III

AR-CTP-24-198 Nylon tape 1" width 2 3 inches Sleeve IR Patch MIL-DTL-5038 Type III

9/4/2025 Page 5 of 44

AR-CTP-24-198 Nylon tape 1" width 2 25 inches Center Front Binding MIL-DTL-5038 Type III

Center Front Binding Grades and Alters per Pattern.

AR-CTP-24-198 Nylon tape 1" width 2 2 inches Hem Drawcord insert into Seam MIL-DTL-5038 Type III

AR-CTP-24-199 Nylon tape 3/8" width 2 6 inches Chest Pocket Zipper Pull MIL-DTL-5038 Type III

AR-CTP-24-199 Nylon tape 3/8" width 1 5 inches Center Back Hood Barrel Lock MIL-DTL-5038 Type III

AR-CTP-24-203 Nylon tape, 1/4" width 4 6 inches Underarm zips MIL-DTL-5038 Type III

AR-CTP-24-203 Nylon tape, 1/4" width 2 6 inches Center Front MIL-DTL-5038 Type III

AR-CTP-24-203 Nylon tape, 1/4" width 2 6 inches Front Pockets MIL-DTL-5038 Type III

AR-CTP-24-203 Nylon tape, 1/4" width 2 6 inches Shoulder Pockets MIL-DTL-5038 Type III

AR-CTP-24-203 Nylon tape, 1/4" width 1 5 inches Neck Hang Loop MIL-DTL-5038 Type III

AR-CTP-24-153 Elastic 1" Width 2 4.5 inches Sleeve Cuff Opening MIL-W-5664 Type II Class 1

AR-CTP-24-150 Elastic Drawcord, 3/16" 1 36 inches Hood Opening, Hood Center Back Hem MIL-DTL-43701 Type II

9/4/2025 Page 6 of 44

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-113 Bar Code Label/Tag Paper

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-274 CordLoc - Barrel 4 Center Back Hood (1), Hem (1), Front Hood (2)

AR-CTP-25-278 Two Component Drawcord Ends 3 Center Back Hood (1), Inside Pocket (2)

Shall be equal to or better than Part #743-0125 of ITW Nexus

AR-CTP-24-208 Snaps (Male Part), No Gloss 1 Center Front Hem MIL-DTL-10884 Style 2A Finish

AR-CTP-24-207 Snaps (Female Part), No Gloss 1 Center Front Hem MIL-DTL-10884 MIL-DTL-10884 Style 2A Finish 5

AR-CTP-24-209 Grommet, Size #0 1 Drawcord Exit at Back of Hood NASM 16491 Type III Class 3

AR-CTP-24-209 Grommet, Size #0 2 Inside Front Pocket at Drawcord Entry Point NASM 16491 Type III Class 3

AR-CTP-24-210 Eyelet, Size #00 4 Hem NASM 20652/1B

AR-CTP-24-210 Eyelet, Size #00 6 Hood NASM 20652/1B

AR-CTP-24-131 Thread, Nylon, Tex 46-51 All Seams A-A-59826 Type I Class B

AR-CTP-24-176 Polyester Cotton-Covered Thread All Top Stitch A-A-50199 Type I

9/4/2025 Page 7 of 44

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-115 Identification and care label

Artwork

Image/Sketch ProductCode Description Artwork type Comments

9/4/2025 Page 8 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Material- Colors Image/Sketch Product Code Description Placement Colorway1

AR-MTP-24-156 Woven Stretch 4-way Outershell main body and elbow reinforcement

0001 | Army OCP Print |

AR-MTP-24-157 Twill Weave 4-way Stretch Sleeve inner elbow patch 0001 | Army OCP Print |

AR-MTP-24-134 Nylon Plain Weave Front lower pocket liner 499 | Tan |

AR-MTP-24-135 Mesh Inner chest pocket 499 | Tan |

AR-MTP-24-143 Lightweight Non-fusible Interlining

Center Front Cuff, Cuff tab Shoulder Pocket Collar Underarm zip guard CF

Zip Guard CF Zip Flap CF Zip Extensions Hood Brim (make sure pattern is Cut 2 to double stiffness)

WHT | White |

Component-Colors Image/Sketch Product Code Description

Colorways Color Family Color Image/Swatch (Ref)L (Ref)A (Ref)B Comments

Camouflage | 0001 | Army OCP Print |

Colors

General Statements - Colors Category Description Statements

General Statement - Colors End Item The end item(s) shall be in the following color(s) as specified in the contract.

General Statement - Colors Component - Color The color shall be specified in end item

9/4/2025 Page 9 of 44

Component-Colors Image/Sketch Product Code Description

AR-CTP-24-175 IFF Glint Tape

AR-CTP-24-187 Zipper, No. 5, Type III Style 8

AR-CTP-24-191 Fastener, Separating, Nonreversible, Zipper, No. 5, Type I, AR-CTP-24-190 Zipper, No. 5, Type I, Style 7

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7

AR-CTP-24-190 Zipper, No. 5, Type I, Style 7

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width

AR-CTP-24-166 Nylon Fastener Tape, Hook, 1" Width

AR-CTP-24-167 Nylon Fastener Tape, Hook, 5/8" Width

AR-CTP-24-167 Nylon Fastener Tape, Hook, 5/8" Width

AR-CTP-24-164 Nylon Fastener Tape, Pile, 4" Width

AR-CTP-24-163 Nylon Fastener Tape, Pile, 2" Width

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width

9/4/2025 Page 10 of 44

AR-CTP-24-165 Nylon Fastener Tape, Pile, 1" Width

AR-CTP-24-262 Nylon Fastener Tape, Pile, 5/8" Width

AR-CTP-24-262 Nylon Fastener Tape, Pile, 5/8" Width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-198 Nylon tape 1" width

AR-CTP-24-199 Nylon tape 3/8" width

AR-CTP-24-199 Nylon tape 3/8" width

AR-CTP-24-203 Nylon tape, 1/4" width

AR-CTP-24-203 Nylon tape, 1/4" width

9/4/2025 Page 11 of 44

AR-CTP-24-203 Nylon tape, 1/4" width

AR-CTP-24-203 Nylon tape, 1/4" width

AR-CTP-24-203 Nylon tape, 1/4" width

AR-CTP-24-153 Elastic 1" Width

AR-CTP-24-150 Elastic Drawcord, 3/16"

AR-CTP-24-274 CordLoc - Barrel

AR-CTP-25-278 Two Component Drawcord Ends

AR-CTP-24-208 Snaps (Male Part), No Gloss

AR-CTP-24-207 Snaps (Female Part), No Gloss

AR-CTP-24-209 Grommet, Size #0

AR-CTP-24-209 Grommet, Size #0

AR-CTP-24-210 Eyelet, Size #00

AR-CTP-24-210 Eyelet, Size #00

AR-CTP-24-131 Thread, Nylon, Tex 46-51

9/4/2025 Page 12 of 44

Label - Colors

AR-CTP-24-113 Bar Code Label/Tag

AR-CTP-24-115 Identification and care label

Component-Colors Image/Sketch Product Code Description

AR-CTP-24-176 Polyester Cotton-Covered Thread

9/4/2025 Page 13 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

| Attached to the garment by a fastener Inscription facing the wearer

| From center back Inscription facing the wearer

| From center back Inscription facing the wearer

9/4/2025 Page 14 of 44

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

9/4/2025 Page 15 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_06-BACK BACK 1 Woven Stretch 4-way (A) Shell

PD25_06-HEM-FACING HEM FACING 1 Woven Stretch 4-way (A) Shell

PD25_06-FRONT FRONT 2 Woven Stretch 4-way (A) Shell

PD25_06-CHEST-PKT-FACING CHEST POCKET FACING 2 Woven Stretch 4-way (A) Shell

PD25_06-FRONT-LEFT-FLAP FRONT LEFT FLAP 1 Woven Stretch 4-way (A) Shell

PD25_06-ZIP-GUARD ZIP GUARD 2 Woven Stretch 4-way (A) Shell

PD25_06-ZIP-GARAGE ZIP GARAGE 2 Woven Stretch 4-way (A) Shell

PD25_06-LWR-PKT-FRT-ZIP-GRD LOWER POCKET FRONT ZIP GUARD 2 Woven Stretch 4-way (A) Shell

PD25_06-LOWER-FRT LOWER FRONT 2 Woven Stretch 4-way (A) Shell

PD25_06-LWR-PKT-SD-ZIP-GRD LOWER POCKET SIDE ZIP GUARD 2 Woven Stretch 4-way (A) Shell

PD25_06-TOP-COLLAR TOP COLLAR 1 Woven Stretch 4-way (A) Shell

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

9/4/2025 Page 16 of 44

Pattern List Pattern Name Piece Part Cut Parts Material Name comments

PD25_06-UNDER-COLLAR UNDER COLLAR 1 Woven Stretch 4-way (A) Shell

PD25_06-STOW-COLLAR STOW COLLAR 1 Woven Stretch 4-way (A) Shell

PD25_06-TOP-STOW-COLLAR TOP STOW COLLAR 1 Woven Stretch 4-way (A) Shell

PD25_06-SLEEVE SLEEVE 2 Woven Stretch 4-way (A) Shell

PD25_06-SHOULDER-PKT SHOULDER POCKET 2 Woven Stretch 4-way (A) Shell

PD25_06-SHOULDER-PKT-STRIP SHOULDER POCKET STRIP 2 Woven Stretch 4-way (A) Shell

PD25_06-HOOD-CENTER HOOD CENTER 1 Woven Stretch 4-way (A) Shell

PD25_06-HOOD-TUNNEL HOOD TUNNEL 2 Woven Stretch 4-way (A) Shell

PD25_06-HOOD-FACING HOOD FACING 2 Woven Stretch 4-way (A) Shell

PD25_06-SLV-ZIP-GRD SLEEVE ZIPPER GUARD 2 Woven Stretch 4-way (A) Shell

PD25_06-SLV-TAB SLEEVE TAB 4 Woven Stretch 4-way (A) Shell

PD25_06-CUFF CUFF 2 Woven Stretch 4-way (A) Shell

PD25_06-HOOD HOOD 2 Woven Stretch 4-way (A) Shell

PD25_06-POCKET-LINING POCKET LINING 2 Nylon Plain Weave (L) Lining

PD25_06-SLV-ELBOW SLEEVE ELBOW 2 Woven Stretch 4-way (S) Stretch

PD25_06-INNER-CHEST-PKT INNER CHEST POCKET 2 Mesh (M) Mesh

PD25_06-SLV-ELBOW-PLEATS SLEEVE ELBOW PLEATS 2 (R) Reinforcement

PD25_06-BRIM-INTERLINING BRIM INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-ZIP-GUARD-INT ZIP GUARD INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-COLLAR-INTERINING COLLAR INTERLINING 1 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-CUFF-INTERLINING CUFF INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-SLV-ZIP-GRD-INT SLEEVE ZIPPER GUARD INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-LEFT-FLAP-INT LEFT FLAP INTERLINING 1 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-SLV-TAB-INT SLEEVE TAB INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

PD25_06-SHOULDER-PKT-INT SHOULDER POCKET INTERLINING 2 Lightweight Non-fusible Interlining (I) Interlining

Pattern Support Details 9/4/2025 Page 17 of 44

Pattern Name Piece Part Cut Part Comments Image

PD25_06-SHOULDER-TAB-

TMP

SHOULDER TAB 0 (T) TEMPLATE

PD25_06-SHOULDER-TAB-

LOOP-TMP

SHOULDER TAB LOOP 0 (T) TEMPLATE

PD25_06-CUFF-ELASTIC-T

MP

CUFF ELASTIC 0 (T) TEMPLATE

PD25_06-HD-FCG-EYE-RN

F-TMP

HOOD FACING EYELET

REINFORCEMENT

0 (T) TEMPLATE

PD25_06-SLV-TAB-HOOK-T

MP

SLEEVE TAB HOOK 0 (T) TEMPLATE

PD25_06-FRT-PKT-GMT-R

NF-TMP

FRONT POCKET GROMMET

REINFORCEMENT

0 (T) TEMPLATE

PD25_06-HD-EYE-RNF-TM

P

HOOD EYELET

REINFORCEMENT

0 (T) TEMPLATE

PD25_06-HD-GMT-RNF-TM

P

HOOD GROMMET

REINFORCEMENT

0 (T) TEMPLATE

PD25_06-HEM-EYE-RNF-T

MP

HEM EYELET

REINFORCEMENT

0 (T) TEMPLATE

9/4/2025 Page 18 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

9/4/2025 Page 19 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Construction Images

9/4/2025 Page 20 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image Description

Back view design details

9/4/2025 Page 21 of 44

Construction Details Construction Area / Location Description Requirement Image Number

Preparation 1) Cut fabric, cording, tape, and webbing according to the Cutters Must and Bill of Materials (BOM)

2) Ensure cord ends, tape, and webbing are seared with a hot knife or cutter to ensure unraveling is prevented. Round edges that are pointed and sharp.

3) Add markings to all pattern pieces according to the patterns and templates, which include snaps, grommets, webbing locations, pocket locations, belt loops, hook and loop, and front and under zipper guards.

4) Sew down interlining to under collar, sleeve pockets, hook tab, cuff tabs, jacket cuffs, underarm zipper guard.

5) Bar tack zipper pulls on the zipper,

(2) bar tacks each zipper pull tape

In Process Step HOOD - PART I 1) Sew brim interlining to hood facing.

2) Sew drawcord channel by serging edges and one side of the channel piece. Tack the channels to the center hood piece. Tack drawcord at top of channel. Then fold in seam allowance and double needle top stitch the channel onto the center hood piece.

NOTE: Avoid catching the drawcord.

3) Sew side pieces onto center hood with the channel tacked on. Serge seam allowance and edge stitch with double needle or two rows stitch having seam allowance facing towards

CB.

4) Place the reinforcement piece at grommet location and set grommet with all layers. No need to sew reinforcement piece. Sew barrel lock keeper right under the channel. Thread drawcord through grommet into the barrel lock.

5) Sew brim facing onto hood. Turn right side out and top stitch 1/8

In Process Step HOOD - PART II 6) Sew hem facing and turn right side out and top stitch 1/8" from the edge.

7) Sew loop on the center back

9/4/2025 Page 22 of 44

Front PART I 1) Prep: Sew grommet reinforcement onto pocket bag. Set grommet.

2) Sew zipper tape by sandwiching the zipper facing piece. Set grosgrain binding on the seam allowance. Edge stitch and push seam allowance away from zipper teeth.

3) Construct zipper guard with interlining sandwiched in between the self pieces. Edge stitch and add loop tape and rank patch loop. Set the zipper guard on wearer's left front and 1/4" top stitch.

4) Sew on hook by the zipper on the wearer's right.

5) Sew name tape on the front pieces as indicated on the pattern.

Front PART II 6) Construct the upper left inner front pocket: Serge reinforcement and then attache onto mesh pocket bag. Sew on zipper welt pocket and serge seam allowance. Lay flat and top stitch the zipper. Bartack the ends of the zipper.

Fold the pocket bag in half, according to the pattern, and tack into place aligning to the front piece.

7) Construct front lower pockets: Sew zipper garage onto zipper. Sew zipper and the pocket bag on the bottom seam of the front self piece. Sew 2 row top stitch. Sew bottom front self piece on to the zipper. Serge seam allowance and 2 row top stitch.

***NOTE: zipper should open toward CF and close at SS.

Collar 1) Sew interlining to under collar piece, follow pattern according to template.

2) Sew hook piece onto the stowable collar piece, only catching one layer.

3) Sew the (2) stowable collar piece, match the notches at the bottom seam having the piece right side facing together. Then turn pieces right side out. Then top stitch 1/8" from the edge.

4) Then combine the under collar, top collar and stowable collar together in one seam. Turn and top stitch on the top portion

9/4/2025 Page 23 of 44

Sleeves SLEEVE 1) Construct the elbow pleats: Sew inverted box pleat following the notches on the pattern. Top stitch the 1/8" away from the edge. Align the pleated self onto the stretch elbow piece. Tack down the cross section of the box pleat according to the pattern.

2) Sew elbow to sleeve. Push seam allowance towards sleeve piece and double needle top stitch.

3) Construct shoulder pocket. Sew bellow pleats and top stitch edges 1/8" from edges. Add zipper to pocket bag and zipper extension. Sew down shoulder pockets onto location according to the pattern.

4) Construct the glint tape holder with hook, loop, and webbing. Attach glint tape in location.

In Process Step JOINING - PART I 1) Sew sleeve to the front and back pieces using the double needle flat lock seam.

2) Serge side seam up to where the underarm zipper location starts.

3) Sew zippers on front of the side seam. Then top stitch with double needle or two rolls stitches.

4) Sew zipper and the underguard onto back. Sew entire side seam with a serge. Then top stitch with double needle or two rolls stitches.

5) Sew garment hang tab/loop at center back

In Process Step JOINING - PART II 6) Tacking hood onto body. Then sew the draw cord keeper together and attach between the hood collar.

7) Attach jacket, hood, collar and under collar to push the seam allowance down to the jacket body. Then top stich the the collar along with 1/8" top stitch from the edge.

9/4/2025 Page 24 of 44

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

All joining seams

301 SSa-1 9-11

Zipper guards 301 SSe-2 9-11

Quilting 301 SSv-1 9-11 hood brim and collar

Construction Details Construction Area / Location Description Requirement Image Number

Hem HEM/CLOSURE - PART I 1) Align reinforcement onto the grommet location as indicated on the pattern, and then set grommet through all layers.

2) Sew the facings on the shelf hem.

Make sure to sew the drawcord at CF.

Edge stitch the facing with the seam allowance. Turn under seam allowance and top stitch facing.

3) Make the cuff: fold self in half and add interlining. Sew together the tab and add hook. Sew the tab, loop, and the elastic onto the cuff. Sew the cuff into a closed circle.

4) Attach the cuff to the sleeve and serge seam allowance then single needle top stitch with the seam allowance toward the sleeve.

Hem HEM/CLOSURE - PART II 5) On the wearer's right side, sew the zipper and the under sipper guard onto the front piece. Bind seam allowance and double needle top stitch down.

6) On the wearer's left side, sew the zipper, zipper guard onto the front piece. Bind seam allowance and double needle top stitch down.

In Process Step FINISHING 1) Set snaps and bar-tacks on indicated location.

Construction Details Secondary Construction Area / Location Description Requirement Image

9/4/2025 Page 25 of 44

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

Jacket Front Zipper & Zipper Flap 7/8 37 stitches/tack 6

¨ þ

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4".

Jacket Sleeve pocket 7/8" 37 stitches/tack 8 þ ¨

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4".

IFF Cover 7/8 37 stitches/tack 2

¨ þ

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4".

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

Binding sewn seam/zipper guard

301 BSa-2 1/4" gauge at 1/16" to 1/8" from edge 9-11 double needle to ensure all layers are caught

Sideseams, hood, raglan, sleeve/elbow

301 LSq-3 1/4" gauge at 1/16" to 1/8" from edge 9-11

Serging 504 EFd-1 9-11

Facings: hem and hood

301 SSc-2 3/4" at sweep, 1-5/8" on hood 9-11

Attachment of pockets

301 LSd-1 9-11

Hook and loop attachment

301 LSbj-1 1/8(± 1/32)-inch from edge 9-11

Welt openings 301 SSj-2/SSs-2 9-11 SSj-2 on one sandwiched side; SSs-2 on side that is turned back and topstitch. 1/4" gauge at 1/16" to 1/8" from edge

Collar 301 LSf-1 9-11 Joining to torso

Hood Channel 301 LSbj-2 9-11 1.5" gauge

9/4/2025 Page 26 of 44

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

Jacket Inner chest pocket openings 5/8 29 4 stitches/tack þ ¨

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4".

Jacket Zipper pulls 3/8 29 24

¨ þ

Minimum bartacks shall be 3/8" 28-32 stitches unless otherwise specified. No raw edges of fabric are allowed. Threads trimmed to 1/4".

9/4/2025 Page 27 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

9/4/2025 Page 28 of 44

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ L7T05 HOOD WIDTH AT WIDEST POINT - ON HALF

(Short)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 12 5/8 3/8 1/2 1/2 0 1/2 0 0

¨ L7T06 HOOD WIDTH AT WIDEST POINT - ON HALF

(Regular)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 12 5/8 3/8 1/2 1/2 0 1/2 1/2 1/2

¨ L7T07 HOOD WIDTH AT WIDEST POINT - ON HALF

(Long)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 12 5/8 3/8 0 1/2 0 1/2 1/2 1/2

¨ L7T09 TOP OF COLLAR - ON HALF (Short)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

12 5/8 3/8 1/2 1/2 0 1/2 0 0

¨ L7T10 TOP OF COLLAR - ON HALF (Regular)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

12 5/8 3/8 1/2 1/2 0 1/2 1/2 1/2

¨ L7T11 TOP OF COLLAR - ON HALF (Long)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

12 5/8 3/8 0 1/2 0 1/2 1/2 1/2

¨ L7T12 TOP OF COLLAR - ON HALF (XLong)

MEASURED STRAIGHT FROM FOLD HALF FROM FOLD

EDGE TO EDGE AT TOP OF COLLAR WITH GARMENT LYING

FLAT AND CF FULLY CLOSED

13 5/8 3/8 0 0 0 0 0 1/2

¨ L7T35 CHEST WIDTH - ON HALF (Short)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 3/8 1/2 2 2 0 2 0 0

¨ L7T36 CHEST WIDTH - ON HALF (Regular)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 3/8 1/2 2 2 0 2 2 2

¨ L7T37 CHEST WIDTH - ON HALF (Long)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

24 3/8 1/2 0 2 0 2 2 2

¨ L7T38 CHEST WIDTH - ON HALF (XLong)

MEASURED STRAIGHT FROM FOLD EDGE TO EDGE AT 1"

BELOW ARMHOLE SEAM WITH GARMENT LYING FLAT AND

CENTER FRONTAND SIDE SEAM ZIPPERS FULLY CLOSED

28 3/8 1/2 0 0 0 0 0 2

¨ L3S15 CENTER FRONT LENGTH (Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 26 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S14 CENTER FRONT LENGTH (Regular) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 25 1/2 1/2 1/2 0 1/2 1/2 1/2

Department of Defense Clothing and Textiles

Style# AR-ETP-25-094

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Grade Rule Size Range Alpha Sizes XXS-4XL | Fit Type Unisex

Selected Sizes X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

9/4/2025 Page 29 of 44

Small Small Mediu m Large X

Large

XX

Large

¨ L3S13 CENTER FRONT LENGTH (Short) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 24 1/2 1/2 1/2 0 1/2 0 0

¨ L3S16 CENTER FRONT LENGTH (X Long) Measurement taken straight from CF at neck seam to lowest point at finished hem edge 28 1/2 0 0 0 0 0 1/2

¨ L5T17 WAIST WIDTH - ON HALF (Long) MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - 3" UP

FROM FRONT ZIPPER SEAM AT SIDE 22 1/2 1/2 0 2 0 2 2 2

¨ L5T16 WAIST WIDTH - ON HALF (Regular) MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - 3" UP

FROM FRONT ZIPPER SEAM AT SIDE 22 1/2 1/2 2 2 0 2 2 2

¨ L5T15 WAIST WIDTH - ON HALF (Short) MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - 3" UP

FROM FRONT ZIPPER SEAM AT SIDE 22 1/2 1/2 2 2 0 2 0 0

¨ L5T18 WAIST WIDTH - ON HALF (XLong) MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - 3" UP

FROM FRONT ZIPPER SEAM AT SIDE 26 1/2 1/2 0 0 0 0 0 2

¨ L7T23 BOTTOM OPENING - ON HALF (Long)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

23 3/4 1/2 0 2 0 2 2 2

¨ L7T22 BOTTOM OPENING - ON HALF (Regular)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

23 3/4 1/2 2 2 0 2 2 2

¨ L7T21 BOTTOM OPENING - ON HALF (Short)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

23 3/4 1/2 2 2 0 2 0 0

¨ L7T24 BOTTOM OPENING - ON HALF (XLong)

MEASURED STRAIGHT FROM HEM FOLD EDGE TO EDGE

WITH GARMENT LYING FLAT, CENTER FRONTAND SIDE

SEAM ZIPPERS FULLY CLOSED AND INNER SIDE PLEATS

FOLD FLAT

27 3/4 1/2 0 0 0 0 0 2

¨ L3S35 FRONT POCKET OPENING LENGTH (Long) Measurement taken from inside of pocket opening edge to edge along front torso inseam 8 1/2 1/4 0 1 0 1 1 1

¨ L3S34 FRONT POCKET OPENING LENGTH (Regular) Measurement taken from inside of pocket opening edge to edge along front torso inseam 8 1/2 1/4 1 1 0 1 1 1

¨ L3S33 FRONT POCKET OPENING LENGTH (Short) Measurement taken from inside of pocket opening edge to edge along front torso inseam 8 1/2 1/4 1 1 0 1 0 0

¨ L3S36 FRONT POCKET OPENING LENGTH (X Long) Measurement taken from inside of pocket opening edge to edge along front torso inseam 10 1/2 1/4 0 0 0 0 0 1

¨ L3S49 BACK NECK OPENING (Long) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 10 3/4 1/4 0 1/2 0 1/2 1/2 1/2

¨ L3S48 BACK NECK OPENING (Regular) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 10 3/4 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ L3S47 BACK NECK OPENING (Short) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 10 3/4 1/4 1/2 1/2 0 1/2 0 0

¨ L3S50 BACK NECK OPENING (XLong) Measurement taken straight with garment pressed flat (face down) from HPS to HPS at neck seam 11 3/4 1/4 0 0 0 0 0 1/2

¨ L3S53 CENTER BACK BODY LENGTH (Long) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

32 5/8 1/2 0 1/2 0 1/2 1/2 1/2

¨ L3S52 CENTER BACK BODY LENGTH (Regular) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

31 5/8 1/2 1/2 1/2 0 1/2 1/2 1/2

¨ L3S51 CENTER BACK BODY LENGTH (Short) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

30 5/8 1/2 1/2 1/2 0 1/2 0 0

9/4/2025 Page 30 of 44

Small Small Mediu m Large X

Large

XX

Large

¨ L3S54 CENTER BACK BODY LENGTH (XLong) Measurement taken straight from center back neck seam to folded hem edge at lowest point of drop tial at center back

34 5/8 1/2 0 0 0 0 0 1/2

¨ L6T03 LONG SLEEVE LENGTH (Long) LAY FLAT / MEASURE ALONG FOLD EDGE FROM HPS TO

SLEEVE HEM EDGE 33 1/4 1/2 0 7/8 0 7/8 7/8 7/8

¨ L6T02 LONG SLEEVE LENGTH (Regular) LAY FLAT / MEASURE ALONG FOLD EDGE FROM HPS TO

SLEEVE HEM EDGE 31 3/4 1/2 7/8 7/8 0 7/8 7/8 7/8

¨ L6T01 LONG SLEEVE LENGTH (Short) LAY FLAT / MEASURE ALONG FOLD EDGE FROM HPS TO

SLEEVE HEM EDGE 30 3/4 1/2 7/8 1 3/8 0 3/8 0 0

¨ L6T04 LONG SLEEVE LENGTH (XLong) LAY FLAT / MEASURE ALONG FOLD EDGE FROM HPS TO

SLEEVE HEM EDGE 36 1/2 1/2 0 0 0 0 0 7/8

¨ L5T03 LONG SLEEVE LENGTH 3 POINT (Long) MEASURE STRAIGHT FROM CB @ NECK SEAM - 9" OVER

TO SHOULDER/TO FINISHED EDGE OF CUFF 37 1/2 1/2 0 7/8 0 7/8 7/8 7/8

¨ L5T02 LONG SLEEVE LENGTH 3 POINT (Regular) MEASURE STRAIGHT FROM CB @ NECK SEAM - 9" OVER

TO SHOULDER/TO FINISHED EDGE OF CUFF 36 1/2 7/8 7/8 0 7/8 7/8 7/8

¨ L5T01 LONG SLEEVE LENGTH 3 POINT (Short) MEASURE STRAIGHT FROM CB @ NECK SEAM - 9" OVER

TO SHOULDER/TO FINISHED EDGE OF CUFF 35 1/2 7/8 1 3/8 0 3/8 0 0

¨ L5T04 LONG SLEEVE LENGTH 3 POINT (XLong) MEASURE STRAIGHT FROM CB @ NECK SEAM - 9" OVER

TO SHOULDER/TO FINISHED EDGE OF CUFF 40 3/4 1/2 0 0 0 0 0 7/8

¨ L7T29 BICEP WIDTH -ON HALF - ON HALF (XLong)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

12 3/4 1/4 0 0 0 0 0 1/2

¨ L7T28 BICEP WIDTH -ON HALF- ON HALF (Long)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

11 3/4 1/4 0 1/2 0 1/2 1/2 1/2

¨ L7T27 BICEP WIDTH- ON HALF - ON HALF (Regular)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

11 3/4 1/4 1/2 1/2 0 1/2 1/2 1/2

¨ L7T26 BICEP WIDTH- ON HALF - ON HALF (short)

MEASURE STRAIGHT FROM FOLD EDGE OF UNDERARM

SEAM AT 1" BELOW ARMHOLE TO FOLDED TOP EDGE OF

SLEEVE

11 3/4 1/4 1/2 1/2 0 1/2 0 0

¨ L5T07 LONG SLEEVE OPENING WIDTH - ON HALF

(EXTENDED) (Long)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC STRETCHED (FABRIC FLAT) 7 1/4 0 1/4 0 1/4 3/8 3/8

¨ L5T06 LONG SLEEVE OPENING WIDTH - ON HALF

(EXTENDED) (Regular)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC STRETCHED (FABRIC FLAT) 7 1/4 1/4 1/4 0 1/4 3/8 3/8

¨ L5T05 LONG SLEEVE OPENING WIDTH - ON HALF

(EXTENDED) (Short)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC STRETCHED (FABRIC FLAT) 7 1/4 1/4 1/4 0 1/4 0 0

¨ L5T08 LONG SLEEVE OPENING WIDTH - ON HALF

(EXTENDED) (XLong)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC STRETCHED (FABRIC FLAT) 7 5/8 1/4 0 0 0 0 0 3/8

¨ L5T11 LONG SLEEVE OPENING WIDTH - ON HALF

(RELAXED) (Long)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC NOT STRETCHED 5 1/2 1/4 0 1/4 0 1/4 3/8 3/8

¨ L5T10 LONG SLEEVE OPENING WIDTH - ON HALF

(RELAXED) (Regular)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC NOT STRETCHED 5 1/2 1/4 1/4 1/4 0 1/4 3/8 3/8

¨ L5T09 LONG SLEEVE OPENING WIDTH - ON HALF

(RELAXED) (Short)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC NOT STRETCHED 5 1/2 1/4 1/4 1/4 0 1/4 0 0

¨ L5T12 LONG SLEEVE OPENING WIDTH - ON HALF

(RELAXED) (XLong)

MEASURE STRAIGHT FROM FOLD EDGE TO EDGE - AT SLV

HEM EDGE WITH ELASTIC NOT STRETCHED 6 1/8 1/4 0 0 0 0 0 3/8

¨ L7T08 HOOD WIDTH AT WIDEST POINT - ON HALF

(XLong)

MEASURED STRAIGHT FROM MIDDLE OF FLAP STITCH LINE

AT FOLD EDGE TO BRIM JOINING SEAM 13 5/8 3/8 0 0 0 0 0 1/2

¨ L3S01 Collar Height at Center Front Measurement taken at center front from collar seam to top of bendback. 4 1/8 0 0 0 0 0 0

¨ L7S03 HOOD HEIGHT (Long) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/4 0 1/4 0 1/4 3/8 3/8

9/4/2025 Page 31 of 44

Small Small Mediu m Large X

Large

XX

Large

¨ L7S02 HOOD HEIGHT (Regular) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/4 1/4 1/4 0 1/4 3/8 3/8

¨ L7S01 HOOD HEIGHT (Short) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 1/4 1/4 1/4 0 1/4 0 0

¨ L7S04 HOOD HEIGHT (XLong) MEASURED FROM NECK SEAM HPS TO TOP OF THE HOOD

AT FOLD 17 5/8 1/4 0 0 0 0 0 3/8

Additional TOFM Details

Code Point Of Measure How to Measure Tol Base Size Grade

9/4/2025 Page 32 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods End Item General Statement General Statement Finished end items shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Testing End item General Statement General Statement Finished end items shall be examined and tested in accordance with the specified examinations and tests on the end item properties unless otherwise excluded, amended, or modified in this document or applicable procurement documents. End item physical tests apply to the finished end item to include all pre and post treatments, assemblies and operations.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements Category Description Detail Statement

9/4/2025 Page 33 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

9/4/2025 Page 34 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Dimensional Stability 50 washes %|Percentage Maximum 3.0 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-g uidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?pa ge=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.

9/4/2025 Page 35 of 44

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Option C

9/4/2025 Page 36 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/4/2025 Page 37 of 44

Description All-Range Tactical Clothing (ARTC) - Softshell Jacket

MIL/CID Number N/A

Style Status

Platform Combat

Environment Cold Weather

End Use Utility

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Jacket and Coats |

Size Range Alpha Sizes XXS-4XL |

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

1 Jackets Material 01 Any weakening defect such as smash, multiple float, thin place, drop stitch or loose slub that might develop into hole " þ ¨

2 Jackets Cutting 02 Any component part not cut in accordance with specified directional lines, twill lines and/or fabric grain not parallel between parts þ ¨

3 Jackets Components 03 Component omitted þ ¨

4 Jackets Stitching and Seaming 04 Omitted þ ¨

5 Jackets Stitching and Seaming 05 Seam and/or stitch type not as specified þ ¨

6 Jackets Bartacks 06 Loose and or tight stitch tension ¨ þ

7 Jackets Bartacks 07 Omitted þ ¨

8 Jackets Bartacks 08 Placement not as specified and/or misaligned þ ¨

9 Jackets Sleeve and armholes 09 Sleeves reversed þ ¨

10 Jackets Sleeve and armholes 10 Sleeves tight, causing pleat and/or excessive puckers on front, back and/or sleeve ¨ þ

11 Jackets Labels 11 Omitted þ ¨

12 Jackets Labels 12 Label text incorrect, incomplete and/or illegible (smeared or bleeding) þ ¨

13 Jackets Hem(s) 13 Hem twisted, pleated and/or puckered þ ¨

14 Jackets Hem(s) 14 Irregular in width ¨ þ

15 Jackets Hem(s) 16 Not finished as specified þ ¨

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

9/4/2025 Page 38 of 44

Defects End Item

Item Defect Category NOs Defect Additional Detail Measurements Major Minor

16 Jackets Cleanliness 15 Any spot and/or stain on outside that cannot be completely removed with a clean cloth moistened with water þ ¨

17 Jackets Cleanliness 17 Thread ends on the outside of the garment ¨ þ

Additional defects Part NOS Defect Major Minor

1 Material and Components 18 Incorrect, not as specified. þ ¨

2 Material and Components 19 Knots greater than Fabric Defect Scale Level C. ¨ þ

3 Material and Components 20 Slubs greater than…