Attachment 1 (L4) - AR-MTP-24-142_Cloth_Batting_Polyester 2.4 oz_1.1_05Sep2025.pdf

Department of Defense Clothing and Textiles

RM # AR-MTP-24-142

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Year 2024

RM Status In Process

Size Range zRM - Rolled Goods |

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

General Statements - Scope Category Description Statements

Approved Use All Departments and Agencies General Statement This document is approved for use by all Departments and Agencies of the Department of Defense (DoD).

Classification Material General Statement The fabric(s) shall be of the following types, classes and styles as specified in the contract..

Scope

9/4/2025 Page 1 of 14

Fabric# AR-MTP-24-142

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Style Colors Color Swatch (Ref)L (Ref)A (Ref)B Comments

WHT | White |

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colors

9/4/2025 Page 2 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Material Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

Material and Component Material and component construction shall conform to the requirements specified as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished material meets the physical requirements and appearance as those produced by following the sequence of operations.

Material Construction

Yarn Ply

Yarn Details

Fiber Percentage Yarn 1 Yarn 100 Polyester

Total Composition Polyester 100

Fiber Percentage Yarn 2 Yarn

Total Composition B

Fiber/Yarn/Additional Details

Woven Information

Weave Type

Warp Count

Weft Count

Shinkage Length 0

Knit Information

Knit Type

Gauge

Wales

Courses

General Information

Fabric Weight 2.4

UOM Oz/yd2|Ounces per square yard

Width 0

UOM

9/4/2025 Page 3 of 14

Additional Construction Details Image Description

Randomized, carded, cross-lapped nonwoven batting, multi-component staple fiber blend.

Thickness (inches) 0.40

Appearance/Hand

UOM

Shirinkage Width 0

UOM

9/4/2025 Page 4 of 14

Style# AR-MTP-24-142

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Style Status

Platform

Environment

End Use

Gender

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Material General Statement General Statement Finished material shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Visual Examination General Statement General Statement The end item shall be examined for defects in color, shade, design, material, finish, construction, workmanship, marking, and the defects shall be classified in accordance with the list of defects.

Inspection Methods Yard by Yard Examination General Statement General Statement Each roll or spool in the sample shall be examined yard-by yard on the face side or face and back as deemed necessary for defects. The defects shall be defined in ASTM D3990 and only defects that are clearly noticeable at normal inspection distance (3 feet) shall be scored. Each roll or spool in the sample shall also be examined for shade variation during the yard-by-yard examination. Any roll or spool in the sample containing uneven shade or shade variation side to side, side to center, or end to end, shall be cause for rejection of entire lot represented by the sample.

Inspection Methods Testing Material and Component General Statement General Statement Materials and components shall be examined and tested in accordance with all the requirements listed on material and/or components properties and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents All requirements are applicable to the sample unit.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection Material and Component Acceptance Criteria The lot shall be unacceptable if the number of defects exceeds the Acceptable Quality Limits (AQL) or the failure of any test.

Conformance Inspection Material and Component Sampling Unless otherwise specified in subsidiary specifications, referenced documents, or procurement documents material and component sampling shall be (2) sample units for lots 800 yards of less, (3) sample units for lots 801 yards to 22,000 yards and (4) sample units for lots over 22,000 yards. For material testing, the sample unit shall be 5 continuous yards full width of the finished cloth for all physical and chemical tests.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

Additional Quality General Statements 9/4/2025 Page 5 of 14

Category Description Detail Statement

Fiber Identification General Statement Each roll of finished material shall be labeled or ticketed for fiber content in accordance with the Title 16 CFR Part 303, Rules and Regulations under the Textile Fiber Products Identification Act.

9/4/2025 Page 6 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Material Properties

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

1 Fiber Content %|Percentage 100% polyester American Association of Textile Chemist and Colorists (AATCC)

AATCC TM20|Fiber Analysis:

Qualitative|3363|

Weight Oz/yd2|Ounces per square yard

2.4 (+/- 10%) ASTM International ASTM D3776 / D3776M|Standard Test

Methods for Mass Per Unit Area (Weight) of Fabric|3363|

3 Thickness at 0.002 psi in|Inches Minimum 0.40 ASTM International ASTM D1777|Standard Test Method for Thickness of Textile Materials|3363|

4 Stiffness in|Inches Maximum 1.0 ASTM International ASTM D1388|Standard Test Method for Stiffness of Fabrics|3363|

5 Dimensional Stability length and width %|Percentage Maximum 5.0 American Association of Textile Chemist and Colorists (AATCC)

AATCC TM135|Dimensional Changes of Fabrics after Home Laundering|3363|

3 cycles AATCC 135 (1), III, (Ai)

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal ITP6|Toxicity|3363| First article testing

Material Properties and Testing

General Statements - Material Component and Physical Requirements Gs Tab Category Description Detail Statements

Material Properties and Testing

Physical Requirements - Material Properties and Testing

Material General Statement General Statement The finished material shall conforms to the requirements listed when tested as specified.

Material Properties and Testing

Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

9/4/2025 Page 7 of 14

Material Properties Color

Color Characteristic Characteristic and Additional Details UOM Min/Max Requirements Source Test method Test Method Options

Additional Material Properties and Testing

Characteristic Characteristic Additional Detail

Unit Of Measure Min/Max Requirements Source Test method Test Method Options

1 Thermal Insulation dry (initial and after 5 launderings) clo|clo Minimum 1.45 ASTM International

ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Under 0.002psi. First article testing

2 Thermal Insulation wet (initial and after 5 launderings) clo|clo Minimum 1.30 ASTM International

ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Under 0.002 psi. First article testing

3 Compression Resistance %|Percentage Maximum 25.0 ASTM International

ASTM D6571 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading

8"x8" sample with a 16.0lb load. First article testing

4 Short Term Recovery %|Percentage Minimum 85 ASTM International

ASTM D6571 Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading

8"x8" sample with a 16.0lb load. First article testing

5 % Water Re-gain, weight percent %|Percentage Maximum 200

The insulation should adsorb a maximum weight gain of water when subjected to room temperature distilled water for 20 minutes with excess water then removed via centrifugation at 1500rpm for 5 minutes. First article testing

9/4/2025 Page 8 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Internal Test Procedures

Material Internal Test Procedures Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| First article testing If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

9/4/2025 Page 9 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Defects Material Fabric type Defect Type Defect Description Details Major Minor

Defects

General Statements- Defects Category Description Detail Statement

1 Quality Material General Statement General Statement The finished material shall be examined and scored for the defects listed.

Additional defects Part NOS Defect Major Minor

9/4/2025 Page 10 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

9/4/2025 Page 11 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement

Comments, Suggestions or Questions

Defense Logistics Agency (DLA) Troop Support Comments, suggestions, or questions on this document should be addressed: 700 Robbins Street, Philadelphia, PA 19111-5096. Since contact information canchange, verify the currency of the address information using Acquisition Streamlining andStandardization Information System (ASSIST) online database https://assist.dla.mil.

2 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Other Government documents, drawings and publications

Code of Federal Regulations (CFR) Document Source Copies of these documents are available online at https://www.ecfr.gov

4 Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

9/4/2025 Page 12 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Known Sources Material Product Code Vendor Material Name Comments

Known Sources Others Other Component Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

1 General Statement - Notes General Statement This section contains information of a general or explanatory nature that may be helpful, but is not mandatory

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

9/4/2025 Page 13 of 14

Description Cloth, Batting, Polyester 2.4 ounces per square yard

MIL/CID Number N/A

Fabric Status In Process

Print/Solid Solid

Fabric Type Non Woven

Defect Type

Year 2024

Enterprise DoD | 01

Service AR | Army

Category RM | Raw Material

Sub Category Material |

Size Range zRM - Rolled Goods |

Item Details Intended End Use

Keyword listing

Comments

NSN

Size

Additional Notes

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian

9/4/2025 Page 14 of 14