SG and EG - Security Grille Cutsheet.pdf

ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER.

D

MSPG

PERFORATED FACE

SECURITY GRILLE271259

PROJECT:

ENGINEER:

CUSTOMER:

SUBMITTAL DATE: SPEC. SYMBOL:

Submittal Sheet MSPG - Perforated Face Security Grille

2024-02-21

OF REVSHEET 1 2© Copyright PRICE INDUSTRIES 2024 MSPG-1-1

MATERIAL:

£ Steel £ Aluminum (minimum security, 10ga. only) £ Stainless Steel (10ga. only)

AVAILABLE SIZES:

• Minimum size 6" x 6" (152mm x 152mm)

• Maximum 30" x 30" (762mm x 762mm)

• Fractional sizes available

FACE PLATE:

£ FP187 - 3/16" (5mm) £ FP10 - 10 ga.

£ FP12 - 12 ga.

PATTERN:

£ P1 - 5/16" (8mm) Holes on 7/16" (11mm) x 60° staggered centers

£ P2 - 3/16" (5mm) Holes on 5/16" (8mm) x 60° staggered centers (not available with FP187 face plate)

£ P3 - 1/4" (6mm) Holes on 3/8" (10mm) x 60° staggered centers

£ P4 - 7/16" (11mm) Holes on 11/16" (17mm) x 60° staggered centers

£ P5 - 1/8 " (3mm) Holes on 3/16" (5mm) x 60° staggered centers

(steel 12 ga. only)

N o m

/8

(3 m m

O p e n in g

N o m

S iz e

Sleeve Length

(per order) F a ce

O ve ra ll

N o m

(5 m m

SLEEVE:

• Minimum length:

• 6" (152mm) with mounting angles or masonry rods

• 2" (51mm) with CS12 fastening

• 4" (102mm) with VCS3BF damper

• 6" (152mm) with barrier bars

• 8" (203mm) with barrier bars and wire mesh

• Maximum length 26" (660mm)

• Sleeve length approximately 4" (102mm) larger than wall thickness is recommended to allow for mounting angles and duct connection

• SLEEVE GAUGE:

£ S187 - 3/16" (5mm) £ S10 - 10 ga.

£ S12 - 12 ga.

• WELDS:

£ Stitch welded (standard) £ CWS - Continuously welded seams

STANDARD FINISH:

£ B12 - Standard White (for steel & aluminum construction) £ 2B - Mill Stainless Steel (for stainless steel construction)

OPTIONAL FINISHES:

• Optional colors

• Custom colors See finishes brochure for additional information.

Contact your PRICE representative for leadtimes and pricing.

NOTE:

• P5 pattern accepted by New York Office of Mental Health for use in medium risk areas in new construction, and for high risk areas for retrofit applications only.

• See NYS-OMH Patient Safety Standards for Guidelines.

Perforated holes on staggered centers

Perf. Area (approx.)

= Nom.Size - 1" (25mm)

BARRIER BARS (OPTIONAL):

(Not available with countersunk screw fastening options)

£ BB16 - 1/2" (13mm) dia. bars (steel only)

£ BB17 - 3/4" (19mm) dia. bars

£ BB19 - 1/2" (13mm) dia. hardened bars in sockets (steel only)

£ BB20 - 3/4" (19mm) dia. hardened bars in sockets (steel only)

£ BB22 - 2" x 1/4" (51mm x 6mm) flat bar

DAMPER (OPTIONAL):

£ VCS3BF - steel opposed blade damper, front operated (not available with fractional sizing, barrier bars, P2 face pattern or P5 face pattern)

TRANSFER GRILLE (OPTIONAL):

£ TG14 - transfer grille, matching faceplate welded to rear of sleeve

(not available with dampers or mounting frames)

ALL METRIC DIMENSIONS ( ) ARE SOFT CONVERTED. IMPERIAL DIMENSIONS ARE CONVERTED TO METRIC AND ROUNDED TO THE NEAREST MILLIMETER.

D

MSPG

PERFORATED FACE

SECURITY GRILLE271259

PROJECT:

ENGINEER:

CUSTOMER:

SUBMITTAL DATE: SPEC. SYMBOL:

Submittal Sheet MSPG - Perforated Face Security Grille

2024-02-21

OF REVSHEET 2 2© Copyright PRICE INDUSTRIES 2024 MSPG-1-1

FASTENING OPTIONS:

£ MF1 - 1" x 1" x 3/16" (25mm x 25mm x 5mm) angle frame

£ MF2 - 11/2" x 11/2" x 3/16" (38mm x 38mm x 5mm) angle frame

£ MF3 - 1" x 1" x 1/8" (25mm x 25mm x 3mm) angle frame

£ MF4 - 11/2" x 11/2" x 1/8" (38mm x 38mm x 3mm) angle frame (MF2 / MF3 / MF4 not available with aluminum or stainless steel construction)

£ MR6 - 3/4" x 3" (19mm x 76mm) Masonry rods, welded 3" (76mm) from face (not available with aluminum or stainless construction)

£ Countersunk holes in face with #12 x 2" (51mm) screws:

£ CS12-SPNR - plated spanner head tamperproof £ CS12-TORX - plated tamper resistant Torx £ CS12-SPNR-SS - stainless spanner head tamperproof £ CS12-TORX-SS - stainless tamper resistant Torx

• Screwdriver bits, handles, and replacement screws for CS fastening options may be ordered under GRD-PARTS model code.

WIRE MESH (OPTIONAL):

£ WM - 10 ga. Wire mesh, 3/8" (10mm) clear opening (WM not available with stainless steel construction or VCS3BF damper)

Mounting Angles (shipped loose) Field welded or fastened to sleeve (fasteners by others)

Recommended sleeve length 4" (102mm) greater than wall to allow for angles and duct connection

Masonry rods to embed in wall construction

Wire mesh behind face retaining angles welded to sleeve

Barrier bars approximately centered in sleeve

Vertical bars on 6" (152mm) centers. Horizontal bars on 12" (305mm) centers are included when height exceeds 12" (305mm)

Max. 4" (102mm)

Scan for link to additional product information.