GAMCO 125SwingUpTP.pdf
PDF 54 KB Posted
- Attached to
- Z2DA--626A4-19-101 - Renovate Ward 1B at the Alvin C. York VA Medical Center, Murfreesboro, TN 37129
- Solicitation number
- 36C24923R0114
About this file
This document contains technical specifications for a swing-up grab bar with integral toilet paper holder. It provides detailed product dimensions, construction information specifying stainless steel materials, a requirement for in-wall reinforcement backing for mounting, and testing standards met.
The related federal contract opportunity is a solicitation from the Department of Veterans Affairs to renovate ward 1B at the Alvin C. York VA Medical Center in Murfreesboro, Tennessee. The scope of work involves renovating an inpatient ward and would require bathroom accessories including grab bars meeting the specifications provided to comply with accessibility standards.
View the file
Other files
Show all 48
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 11/9/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Gamco Commercial Restroom Accessories.
Textured
Finish Face of Wall
Finish Face of Floor
33 to 36" 838 to 914mm
29-15/16" 760mm
6-3/4" 171mm
3/16" 5mm
10-1/2" 267mm
Toilet Paper Holder1-1/4" 32mm
5-1/8" 130mm
2-3/4" 70mm
11-13/16" 300mm
3-15/16" 100mm
5-29/32" R 150mm
10-1/4" 260mm
3/8" R 10mm
4PL
11/32" dia.
10mm
4PL
CONSTRUCTION:
Tubing - Fabricated of type 304 stainless steel and assembled into a swivel hinge. Exposed surfaces polished to a #4 satin-finish and knurled grip. Detent holds bar in vertical position.
Wall Retaining Clip - Stainless steel.
Back Plate - 3/16" (4.5mm) thick, one piece stainless steel design.
MOUNTING:
Unit absolutely must be secured to in-wall reinforcement backing. Unit is attached with 4 bolts with a minimum 1/4" (6mm) diameter. Mounting bolts not furnished. Screws (not furnished).
SPECIFICATIONS:
Grab bars have been designed and tested to withstand 500 lbs. downward pull when properly installed. This exceeds HUD, HEW, FHA, VA, and other Federal, State, and local codes, including the Americans with Disabilities Act (ADA).
Swing Up Grab Bar with Integral Toilet Paper Holder shall be Model 125TPH of GAMCO Commercial Restroom Accessories, One Gamco Place, Durant, OK, 74701-1910
1 1/4" (32mm) DIAMETER
SWING UP GRAB BAR
WITH INTEGRAL
TOILET PAPER HOLDER
125TPH
CONFIGURATION
File details come from the government source that posted it. Updated .