Halon Fire Extinguisher Inspections
The Maryland Air National Guard is seeking a small business contractor to perform comprehensive inspection and maintenance services for 34 Amerex 600 150 lb. wheeled Halon (1211 Agent) fire extinguishers located at Martin State Airport. The solicitation (W50S8225QA003) requires annual inspections, 6-year maintenance, and 12-year hydrostatic testing in compliance with NFPA 10 standards. Contractors must complete detailed documentation, provide service reports to the Contracting Officer, and follow specific technical requirements for inspection, maintenance, and testing procedures. The solicitation requires vendors to pick up fire extinguishers in a phased approach and perform all necessary services with precision and regulatory compliance. The proposal response is due by April 11, 2025, with services potentially covering a three-year period from April 2025 to April 2028.
The contract is a 100% small business set-aside under NAICS code 922160 for fire protection services, with performance located in Middle River, MD 21220. The contract includes multiple contract line item options and will utilize firm fixed pricing arrangements for the required services. Transportation and handling of fire extinguishers will be the contractor's responsibility, with delivery and service locations at the Air National Guard facility in Baltimore, Maryland. While specific award value is not explicitly stated, the contract involves comprehensive maintenance of 34 fire extinguishers across a potential three-year service period. The solicitation emphasizes technical compliance, requiring precise adherence to industry standards for fire extinguisher inspection, maintenance, and testing protocols.
W50S8225QA003 Department of the Army Maryland Army National Guard
3/28/25, 5:24 PM Wing Wide Fire Extinguisher Service
The Department of the Army National Guard, 130th Airlift Wing located in Charleston, West Virginia, is seeking quotes for a firm-fixed-price contract to provide wing-wide fire extinguisher service. The work scope includes hydrostatic testing and reservice of existing fire extinguishers as well as the purchase of new fire extinguishers. Quotes are due by September 23, 2024, and the award will be made on a lowest price technically acceptable basis without discussions. Relevant details such as the list of required services and supplies, inspection/acceptance points, and delivery schedule are provided in the attached Statement of Work and combined synopsis/solicitation document.
This requirement is designated as a total small business set-aside under NAICS code 922160. The contract will be awarded as a purchase order, and the work must be completed between September 27, 2024 and December 30, 2024. The total quantity of fire extinguishers to be serviced and replaced is 212, and the place of performance is the 130th Air National Guard Base in Charleston, West Virginia.
W50S9J-24-Q-0006 Department of the Army National Guard
9/12/24, 8:52 AM Morning Pride Bunker Gear
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is LEEDESMCF0052 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 922160 with a small business size standard of 0.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-08-21 14:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Lee, VA 23801The MICC End User requires the following items, Brand Name Only (Exact Match), to the following: LI 001: LTO-62H3 Bunker Tails Black "Spec ID GSAFTL00046" LTOTOS62B LTO Tail Outer Shell -7 osy PBI Max - Black LTOTTLH LTO Tail Thermal Liner -6.8 osy Glide PBI G2 LTOTMB3 LTO Tail Moisture Barrier -4.7 osy Type 2F Crosstech Black IPLC (O20) Std -Inspection Port Liner LNDC Std-Liner detachable LNSETTE Std -SET Thermal Enhancement PKTLSTD Std -Liner Label Pocket RS-RRSAC (R01) Std-Articulating Rapid Rescue Strap SATUPST-62B (O01) Std -Take Up Straps - 2 Postman TLWH (W50) Std -Wristlets- Long Hybrid with tabs - Nomex TR-DSS Std -Trim Double-Stitched TRC304M-TL Trim -(4) NEW YORK -lime 2-tone Scotchlite (3") LTBACK-62B Back Patch - PBI Max - Black * straight * no periods * no spaces between EMS LT3S15-SL 15 -3" sewn letters -lime Scotchlite LTHEMV-62B Hem Patch w/Velcro - PBI Max - Black - FF LAST NAME ONLY ( 1st INITIAL ONLY when specified) - Avg. 7 letters - OK to use 2" to fit LT3S07-SL 7 -3" sewn letters -lime Scotchlite PO-EUS-R (O17) Embroidered American Flag - stars towards front --right sleeve CLZV2-62B (E10) 2" Velcro/Zipper Coat Closure CCLTO-62B (Q02) LTO Comfort Chinstrap LNDAPC (O50) Dead Air Panels CFCC-ARB Coat Cuffs - Arashield - Black CFSHC-62B Shingle Cuffs - PBI Max - Black PKPTPHW-62B Pleated Patch Pockets w/Handwarmers - PBI Max - Black PKRCPTVS-62B Large Hook on a Patch w/Velcro Strap - PBI Max - Black --left chest PKRD-62B Radio Pocket - PBI Max - Black 8 X 3 X 2 --right chest PKRD-FNL Notch Flap -Left, 5, EA;LI 002: LTO-62H3 Bunker Pants Black "Spec ID GSAFTL00047" LTOPOS62B LTO Pant Outer Shell -7 osy PBI Max - Black LTOPTLH LTO Pant Thermal Liner -6.8 osy Glide PBI G2 LTOPMB3 LTO Pant Moisture Barrier -4.7 osy Type 2F Crosstech Black IPLP (O21) Std -Inspection Port Liner LNDP Std -Liner Detachable TR-DSSP Std -Trim Double-Stitched TRP307M-TL Trim -(7) NFPA -lime 2-tone Scotchlite (3") CLNFV2RCT-62B (J14) Narrow Fly -2" Velcro w/ Reverse Hook on Tab CFAN-ARB (O03) Angled Cuffs - Arashield - Black CFPC-ARB (M27) Pant Cuffs - Arashield - Black KNBFR-62B BiFlex Heat Channel Knees Replaceable - PBI Max - Black KNBFH-ARB (K54) Horizontal Strips in BiFlex knees to be Arashield - Black PKBLP-62B Bellows Pockets - PBI Max - Black 9 x 9 x 1.5 PKBLP-V1 3 Vertical Strips Velcro on Flap/Full on Pocket OPSSA Snap Style Suspender Attachment RSLADKV Ladder Escape Belt - Kevlar RSLADLOWR (H16) R/L Life Grip Ladder/Escape Pant Adapt Lower Placement SPHBBSQI Basic H-Back Suspenders w/ Snap Attach & Quick Adjust Install SPP Suspender Padding, 5, EA;LI 003: Shipping Cost, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions - Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factors shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price."No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis.5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/ .
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation DisclosuresReporting During Contract Performance
LEEDESMCF0052 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum
8/17/20, 2:39 PM