Section_33_11_00.07_Polyvinyl_Chloride_Pipe.docx
DOCX document 22 KB Posted
- Attached to
- Dugway Proving Ground, Utah Road Maintenance
- Solicitation number
- W911S6-17-B-0001
About this file
SECTION 33 11 00.07 POLYVINYL CHLORIDE PIPE
View the file
Other files
Show 40 more
Latest 50 of 87 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION 33 11 00.07
SECTION 33 11 00.07
POLYVINYL CHLORIDE PIPE
PART 1 GENERAL
| 1.1 | SECTION INCLUDES |
| A. | Polyvinyl chloride pipe, couplings, fittings and joint materials. |
1.2 REFERENCES
A. ASTM D 1784: Standard Specification for Rigid Polyvinyl Chloride (PVC) Compounds and Chlorinated Polyvinyl Chloride (CPVC) Compounds.
B. ASTM D 2241: Standard Specification for Polyvinyl Chloride (PVC) Pressure Rated Pipe (SDR-Series).
C. ASTM D 2321: Standard Practice for Underground Installation of Flexible Thermoplastic Sewer Pipe.] D. ASTM D 2412: Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading.
E. ASTM D 2564: Standard Specification for Solvent Cement for Polyvinyl Chloride (PVC) Plastic Pipe and Fittings.
F. ASTM D 2729: Standard Specification for Polyvinyl Chloride (PVC) Sewer Pipe and Fittings.
G. ASTM D 2774: Standard Recommended Practice for Underground Installation of Thermoplastic Pressure Piping.
H. ASTM D 2855: Standard Practice for Making Solvent Cemented Joints With Polyvinyl Chloride (PVC) Pipe and Fittings.
I. ASTM D 3034: Standard Specification for Type PSM Polyvinyl Chloride (PVC) Sewer Pipe and Fittings.
J. ASTM D 3139: Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals.
K. ASTM D 3212: Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals.
L. ASTM F 656: Standard Specification for Primers for Use in Solvent Cement Joints of Polyvinyl Chloride (PVC) Plastic Pipe and Fittings.
M. ASTM F 679: Standard Specification for Polyvinyl Chloride (PVC) Large Diameter Plastic Gravity Sewer Pipe and Fittings.
N. ASTM F 949: Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings.
O. AWWA C 900: AWWA Standard for Polyvinyl Chloride (PVC) Pressure Pipe, 4 In. Through 12 In., for Water.
1.3 DEFINITIONS
A. Standard Dimension Ratio (SDR): Outside diameter of pipe divided by wall thickness.
1.4 SUBMITTALS
A. Certified copies of test reports demonstrating conformance to applicable pipe specifications.
| PART 2 | PRODUCTS | |
| 2.1 | GRAVITY PIPE SYSTEMS |
A. Pipe: Rigid PVC plastic per ASTM D 1784 for a minimum cell class of 12454 B or 12454C and an ASTM D 2241 SDR rating as indicated.
1. 4 inches through 15 inches per ASTM D 3034.
2. 18 inches through 27 inches per ASTM F 679.
3. 4 to 10 inches diameter corrugated wall with a smooth interior, ASTM F 949.
B. Fittings: ASTM D 1784.
C. Stiffness: 50 psi minimum when measured at 5 percent deflection per ASTM D 2412.
D. Additives and Fillers: Not to exceed 10 parts by weight per 100 parts of resin in the compound.
E. Joints: Bell and spigot with flexible elastomeric seals per ASTM D 3212.
F. Flattening: No visual evidence of splitting, cracking, or breaking when flattened to 60 percent deflection per ASTM D 2412.
2.2 PRESSURE PIPING
A. Pipe: Conform to AWWA C900 except use outside diameters defined by ductile iron pipe sizes. Dimensions, class, SDR, and tolerances per ASTM D 2241.
B. Compounds: Type 1, Grade 1, Class 12454A per ASTM D 1784.
C. Joints:
1. Bell and spigot with flexible elastomeric seals per ASTM D 3139. Use non-toxic lubricant.
2. Solvent weld per ASTM D 2564.
| 2.3 | PERFORATED PIPE SYSTEMS |
| A. | Pipe: Refer to gravity pipe products above. |
| B. | Perforations: ASTM D 2729. |
| C. | Joints: Push-on, solvent weld or other. |
2.3 SOLVENT WELDS
A. Primer, ASTM F 656.
B. Glue, ASTM D 2564.
| PART 3 | EXECUTION | |
| 3.1 | INSTALLATION |
A. Install pipe per manufacturer’s instructions, ASTM D 2321 for gravity systems, AWWA C 900 or ASTM D 2774 for pressure systems, and ASTM D 2855 for underground Irrigation Systems.
B. Water distribution and transmission, Section 33 12 19.
C. Gravity water systems, Section 33 31 00 or Section 33 41 00.
D. Irrigation System, Section 32 84 23.
END OF SECTION
POLYVINYL CHLORIDE PIPE Page 1
File details come from the government source that posted it. Updated .