SECTION_05_12_00_Structural_Steel.docx
DOCX document 22 KB Posted
- Attached to
- Dugway Proving Ground, Utah Road Maintenance
- Solicitation number
- W911S6-17-B-0001
About this file
SECTION 05 12 00 STRUCTURAL STEEL
View the file
Other files
Show 40 more
Latest 50 of 87 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION 05 12 00
SECTION 05 12 00
STRUCTURAL STEEL
| PART 1 | GENERAL |
| 1.1 | SECTION INCLUDES |
| A. | Miscellaneous structural steel members with welds and fasteners. |
| 1.2 | REFERENCES |
| A. | AISC S326: Specification for Design, Fabrication and Erection of Cold-Formed Structural Members for Buildings. |
| B. | ASTM A 6: Standard Specification for General Requirements for Rolled Steel Plates, Shapes, Sheet Piling, and Bars for Structural Use. |
| C. | ASTM A 36: Standard Specification for Structural Steel. |
| D. | ASTM A 53: Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. |
| E. | ASTM A 307: Standard Specification for Carbon Steel, Bolts and Studs, 60,000 psi Tensile Strength. |
| F. | ASTM A 446: Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality. |
| G. | ASTM A 500: Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes. |
| H. | ASTM A 501: Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing. |
| 1.6 | DELIVERY, STORAGE, AND HANDLING |
| A. | Store materials to permit easy access for Inspection and identification. Keep steel members off the ground using pallets, platforms, or other supports. Protect steel members and packaged materials from corrosion and deterioration. |
| B. | Repair or replace damaged materials as acceptable to COR. |
| PART 2 | PRODUCTS |
| 2.1 | GENERAL |
| A. | Use only materials which are smooth and free of surface blemishes, including pitting, seam marks, roller marks, rolled trade names, and roughness. |
| 2.2 | MATERIALS |
| A. | Structural Steel Shapes, Plates, and Bars: ASTM A 36 steel. |
| B. | Tubing: Cold-formed steel, ASTM A 500, Grade B. Hot-formed steel, ASTM A 501. |
| 2.3 | ACCESSORIES |
| A. | Bolts: Galvanized steel; Section 05 05 23. |
| 2.4 | NON-SHRINK GROUT |
| A. | Cement Based, Section 03 61 00. |
| PART 3 | EXECUTION |
| 3.1 | INSTALLATION |
| A. | Make provisions for sufficient temporary bracing to maintain safe, plumb, and in true alignment until completion of installation. |
| B. | Clean concrete and masonry bearing surfaces. |
| C. | Set accurately to lines and elevations indicated. Align and adjust before permanently fastening. |
| D. | Do not enlarge holes in members by burning or by use of drift pins. Ream holes that must be enlarged to admit bolts. |
END OF SECTION
STRUCTURAL STEEL Page 1
File details come from the government source that posted it. Updated .