Lifting_Eye_Comp_Cut_Sheet_LIFTMAX-PEP-00100 (050726).pdf
PDF 119 KB Posted
- Solicitation number
- N4008526R0005
About this file
This is a technical engineering drawing for a plate-mounted pad eye lifting device manufactured by Bishop Lifting Products Inc. The drawing (PEP-00100, Revision 2) specifies a 1 metric ton rated capacity (RC) pad eye designed for below-the-hook lifting applications. The device features a 1/2-inch diameter eye opening with an 5/8-inch radius, dimensions of 5 inches by 4 inches on the mounting plate, and four mounting holes (3/8-inch diameter, typical). The estimated weight is 2.9 pounds.
The drawing includes comprehensive specifications requiring welding per AWS D1.1 standards, cold galvanized coating system, testing to 2.0 times rated capacity per BLP procedures, and compliance with ANSI/ASME B30.20 below-the-hook lifting device requirements. Design temperature range is -20°F to 150°F. Tolerance requirements specify machined surfaces per ASME/ANSI B46.1 with standard fractional tolerances (±1/8" for whole numbers, ±0.02 for decimals to two places, and ±1° for angular dimensions). The drawing contains confidential information and was approved through revision cycles in April 2023, September 2023, and November 2023, with the final check dated November 30, 2023. General notes emphasize that the base structure must be capable of handling applied forces, the pad eye should be oriented to minimize side loads, and all edges should be chamfered approximately 1/8 inch.
View the file
Other files
Show 40 more
Latest 50 of 55 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PEP-00100
B SIZE SCALE:NTS
REV.
DWG NO.THIRD ANGLE
PROJECTION
EST. WT. 2.9 lbm SHEET 1 OF 1
REVISION HISTORY
REV. DESCRIPTION DATE APPROVED
0 PRELIMINARY 4-14-23 AQ
1 UPDATED WELD SIZE 09-05-23 OO
2 INTERNAL UPDATES 11-29-23 OO
THIS DRAWING CONTAINS CONFIDENTIAL INFORMATION.
DATA CONTAINED WITHIN IS TO BE USED FOR INTENDED
PURPOSES ONLY. NO DUPLICATION OR DISCLOSURE ALLOWED
WITHOUT PRIOR WRITTEN CONSENT FROM BISHOP LIFTING
PRODUCTS INC. ALL DUPLICATES SHALL BE RETURNED OR
DESTROYED IMMEDIATELY UPON REQUEST!
UNLESS NOTED
ALL MACHINED
SURFACES PER
ASME/ANSI B46.1
TITLE
10340 WALLISVILLE RD.
HOUSTON,TEXAS 77013
WWW.LIFTING.COM • (713)674-2266
CHECK OFF
ACTION APP. DATE
DESIGN AQ 4-14-23
DRAWN OO 11-29-23
ENG. CH 4-14-23
CHK. CH 11-30-23
µin
ALL FRACTIONAL u 1/8" .0 u 0.1 .00 u 0.02 .000 u 0.005
ANGULAR TOLERANCE
UNLESS NOTED
ALL ANGULAR DIM. u 1v
PROJECT: REF # UPE-001000
TOLERANCE UNLESS NOTED
DRAWING APPROVAL
BY
DATE
AS DRAWN AS NOTED
GENERAL NOTES:
1. WELDING PER AWS D1.1.
2. ENSURE BASE STRUCTURE IS CAPABLE OF HANDLING FORCES APPLIED BY PADEYE.
3. ORIENT PADEYE IN DIRECTION OF SLING TO MINIMIZE SIDE LOAD.
4. TESTING SHALL BE PERFORMED AS PER BLP PROCEDURE TO 2.0 X RATED CAPACITY.
5. BREAK ALL EDGES AND CORNERS UNLESS OTHERWISE SPECIFIED, CHAMFER EDGES APPROX. 1/8".
6. THIS PADEYE MEETS OR EXCEEDS ANSI/ASME B30.20 BELOW THE HOOK LIFTING DEVICES REQUIREMENTS.
7. COATING SYSTEM SHALL BE COLD GALVANIZED.
8. DESIGN TEMP. -20 DEG F TO 150 DEG F.
BLP PLATE MOUNTED PAD EYE
RC 1 METRIC TON
2"
2-1/2"
3"
5"
4"
2"
O 1/2"
R 5/8"
1/2"
1/2"
XXX XXX XXXX
XX XXX XXX
STAMP SN,RC,PN.
O 3/8"
TYP.
File details come from the government source that posted it. Updated .