01-M204 - ROOF REMODEL -MECHANICAL.pdf

CU-1-2 CU-1-4

1 2

3 (TYP 1 OF 3)

S L O

P E

D O

W N

/4

CU-1-3

No DATEREVISION

DRAWING TITLE

CHECKED BY

ST.CLOUD, MN 56303

VA MEDICAL CENTER

BUILDING No

LOCATION

DRAWING NO.DRAWN

DWG. OF

PROJECT TITLE

PLOT SCALE

PROJECT NO.

DATE:

CONSULTA ARCHITECT/ENGINEER OF STAM

FULLY

SPRINKLERED

A

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 1

I hereby certify that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Engineer under the laws of the State of Minnesota.

Name:

Date: 03/30/2022

License Number: MN#

03/30/2022

B

IM

/2

.0

V A

S t C lo u d

E H

R M

I n fr a s tr u c tu re U p g ra d e s /6

-2

.B

.M

R

.r v t

/1

/2

:0

:0

A

M

01-M204

ROOF REMODEL -

MECHANICAL

EHRM

INFRASTRUCTURE

UPGRADES

656‐21‐235

RDL JCL

16305

1/4" = 1'-0"

ROOF - MECHANICAL - TELECOM A101/A200 - CONDENSING UNITS

1 1/4" = 1'-0"

ROOF - MECHANICAL - TELECOM 005F - CONDENSING UNITS

KEYED NOTES 2/01-M204:

1. ROUTE REFRIGERANT PIPING DOWN TO BASEMENT LEVEL - THRU CORRIDOR

C2EB AND CORRIDOR C1EB TO TELECOM ROOM 005F FOR EVAPORATOR UNIT

AC-1-3.

2. FIELD COORDINATE FINAL INSTALLATION LOCATION OF CONDENSING UNIT TO

MAINTAIN MINIMUM 10'-0" DISTANCE FROM ROOF EDGES FOR MAINTENANCE.

#KEYED NOTES 1/01-M204:

1. ROUTE REFRIGERANT PIPING DOWN TO LEVEL 01 - THRU CORRIDOR C2-A2 AND

CORRIDOR C1NC TO TELECOM ROOM A101 FOR EVAPORATOR UNITS AC-1-4.

2. ROUTE REFRIGERANT PIPING DOWN TO LEVEL 02 - THRU CORRIDOR C2-AS TO

TELECOM A22 FOR EVAPORATOR UNITS AC-1-6 AND AC-1-7.

3. FIELD COORDINATE FINAL INSTALLATION LOCATION OF CONDENSING UNIT TO

MAINTAIN MINIMUM 10'-0" DISTANCE FROM ROOF EDGES FOR MAINTENANCE.

4. EXTEND REFRIGERANT PIPING TO RELOCATED CONDENSING UNIT NEW

LOCATION.

FIELD VERIFICATION NOTES

1. THE HVAC CONTRACTOR SHOULD VISIT THE SITE PRIOR TO BID TO FIELD VERIFY ALL EXISTING CONDITIONS WHICH MAY AFFECT THEIR

BID. THE FOLLOWING ITEMS SHALL BE VERIFIED:

A. EXACT PLACEMENT, SIZE, CAPACITY MANUFACTURER AND CONDITION OF ALL EXISTING HVAC EQUIPMENT WITHIN SCOPE OF

WORK, WHETHER EXPLICITY SHOWN OR NOT.

B. SIZE AND LOCATION OF ALL EXISTING DUCTWORK.

C. SIZE AND LOCATION OF ALL EXISTING GRILLES, REGISTERS AND DIFFUSERS.

D. SIZE AND LOCATION OF ALL EXISTING THERMOSTATIC CONTROL DEVICES.

E. SIZE AND LOCATION OF ALL EXISTING PLUMBING AND HYRONIC PIPING.

2. ALL REFERENCES ON THESE DRAWINGS TO EXISTING EQUIPMENT, DUCTWORK, DIFFUSERS, THERMOSTATS AND PIPING ARE FOR REFERENCE ONLY. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO VERIFY ALL THESE ITEMS PRIOR TO BID AND INCLUDE IN THEIR

BID ANY AND ALL AMOUNTS REQUIRED TO ACCOMMODATE EXISTING CONDITIONS.

3. NO ALLOWANCES WILL BE MADE AFTER THE PROJECT HAS BEEN AWARDED FOR FAILURE TO VERIFY EXISTING CONDITIONS.

4. ANY DISCREPANCIES WHICH MAY AFFECT THE CONTRACTORS BID SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER AND

ARCHITECT FOR DIRECTION.

0 4' 8'2' 0 4' 8'2'

NN

100% CD 03/3

03/30

CONSULTANT ARCHITECT/ENGINEER OF RECORD STAMP

EMarkfort Snapshot

EMarkfort Cloud

EMarkfort Snapshot

EMarkfort Snapshot