2.01 Amend 0011 Q&A.pdf

22 MB Posted

Attached to
YON-285 Outfit
Solicitation number
N6264926R0013
Issued by

About this file

Written by GovTribe AI ·

This is a Questions and Answers (Q&A) document related to Amendment 0011 for the YON-285 Outfit solicitation (N6264926R0013), a Firm-Fixed-Price contract for repair and continuous maintenance of the YON-285 Craft at Commander, Fleet Activities Sasebo (CFAS) in Sasebo Naval Base, Japan. The document does not contain the actual Q&A responses but rather provides technical specification tables and requirements for welding, fabrication, and inspection work.

The file establishes detailed welding and fabrication requirements organized in Table 1, which specifies applicable standards and procedures across five material categories: Class P-1, P-2, and P-LT piping; Class P-3a piping; hard-facing valve parts; Class A pressure vessels; and propulsion boilers with bronze propellers. For each category, the table identifies mandatory requirements for welder and brazer qualifications, welding procedures, brazing procedures, welding requirements, filler material, joint design, heat treatment, workmanship requirements, visual inspection of joint fit-up, and visual inspection, referencing specific military standards (S9074-AQ-GIB-010/248, S9074-AR-GIB-010/278, MIL-STD-2035, MIL-STD-2185, DOD-STD-2185, S9221-C1-GTP-010/020, and 0900-LP-001-7000). The document also includes a material list for socket-welded joint components (1/2" and 3/4" x 1/2" couplings and 316 stainless steel pipe) and provides optional compliance pathways allowing the shipbuilder to utilize alternative standards such as MIL-STD-1689 or previously ABS-accepted procedures, provided such alternatives result in no additional government cost and are approved by the supervisor.

View the file

Other files

File Type Posted
Solicitation Amendment N6264926R00130015 SF 30.pdf PDF
LETTER-130-0011-26.pdf PDF
Solicitation Amendment N6264926R00130014 SF 30.pdf PDF
2.01 Soli Amendment 0013 LAR explaination for KTR.pdf PDF
Solicitation Amendment N6264926R00130012 SF 30.pdf PDF
2.01 Solicitation Amendment N6264926R00130011 SF 30.pdf PDF
2.01 Amend 0011 Attachment.pdf PDF
Solicitation Amendment N6264926R00130011 SF 30.pdf PDF
2.01 Solicitation Amendment N6264926R00130011 SF 30.pdf PDF
Solicitation Amendment N6264926R00130010 SF 30.pdf PDF
Q_A_Amend 0009.pdf PDF
Solicitation Amendment N6264926R00130009 SF 30.pdf PDF
89MVA86401_00_A01 v2.pdf PDF
89MVA12301_00_A01 v2.pdf PDF
89MVA15003_00_A01 v2.pdf PDF
89MVA15006_00_A01 v2.pdf PDF
89MVA15005_00_A01 v2.pdf PDF
89MVA15002_00_A01 v2.pdf PDF
89MVA86303_00_A01 v2.pdf PDF
89MVA15007_00_A01 v2.pdf PDF
Solicitation Amendment N6264926R00130008 SF 30.pdf PDF
2.01 Solicitation Amendment N6264926R00130006 SF 30.pdf PDF
2.01 RFP N6264926R00130006 Q&A YON 285 Outfit.pdf PDF
YON Location Akasaki.pdf PDF
Solicitation Amendment N6264926R00130004 SF 30.pdf PDF
Geographical Akasaki YONs.docx DOCX document
89MVA86401_00_A01.pdf PDF
89MVA15005_00_A01.pdf PDF
Attachment II Price Proposal Form N6264926R0013_Final.xlsx XLSX spreadsheet
89MVA15003_00_A01.pdf PDF
89MVA15006_00_A01.pdf PDF
2.01 Solicitation Amendment N6264926R00130002 SF 30.pdf PDF
89MVA15007_00_A01.pdf PDF
89MVA86301_00_A01.pdf PDF
89MVA86303_00_A01.pdf PDF
Attachment 3 YON 285 6B1 CONTRACTOR QUESTIONS.pdf PDF
Attachment 4 YON 285 6B1 DSRA PERL.xlsx XLSX spreadsheet
Attachment 6 YON 285 6B1 CONTRACT DATA SHEET.docx DOCX document
DD1423 YON-285 6B1 DSRA CDRL A005 WEEKLY PROGRESS REPORT.pdf PDF
DD1423 YON-285 6B1 DSRA CDRL A004 DAILY REPORT.pdf PDF
Attachment 5 YON 285 6B1 MILESTONE DSRA.xlsx XLSX spreadsheet
DD1423 YON-285 6B1 DSRA CDRL A010 KTR DEFICIENCY REPORTING.pdf PDF
DD1423 YON-285 6B1 DSRA CDRL A002 QUALITY ASSURANCE PROGRAM PLAN.pdf PDF
YON 285 6B1 Specs 5-8.pdf PDF
DD1423 YON-285 6B1 DSRA CDRL A006 CONFERENCE REPORT.pdf PDF
DD1423 YON-285 6B1 DSRA CDRL A008 TEMPORARY SERVICES.pdf PDF
YON 285 6B1 Specs 1-4.pdf PDF
YON 285 6B1 Specs 9-11.pdf PDF
Attachment 2 YON 285 6B1 PROPOSAL BREAKDOWN.xlsx XLSX spreadsheet
DD1423 YON-285 6B1 DSRA CDRL A007 KEY EVENT REPORT.pdf PDF
Show 40 more

50 files listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

6B1

FY26

* - PARAGRAPH 3.4.4 APPLIES 6 of 30 ITEM NO: 009- 12

** - PARAGRAPH 3.10 APPLIES FY-26

TABLE 1

WELDING, FABRICATION, AND INSPECTION OF PIPING, PRESSURE VESSELS, PROPELLERS, AND MACHINERY

COLUMN A B C D E

L I N E

SITUATION

EVOLUTION

CLASS P-1, P-2

AND P-LT PIPING

CLASS P-3a

SPECIAL

CATEGORY,

OTHER CLASS P-

3a, AND P-3b

PIPING

HARD

FACING

VALVE

PARTS

CLASS A

PRESSURE

VESSEL

** PROPULSION

BOILERS

*PROPELLE

RS

(BRONZE)

1 WELDER AND

BRAZER

QUALIFICATI

ON

S9074-AQ-GIB-

010/248, PARAGRAPH 5

0900-LP-001-7000,

SECTION 4

S9074-AQ-GIB-010/248,

PARAGRAPH 5

S9221-C1-GTP-

010/020

2 WELDING

PROCEDURE

S9074-AQ-GIB-

010/248, PARAGRAPH 4

NOT

APPLICABLE

S9074-AQ-GIB-010/248,

PARAGRAPH 4

S9221-C1-GTP-

010/020

DOD-STD-

2185, PARAGRAP

H 4

3 BRAZING

PROCEDURE

NOT APPLICABLE 0900-LP-001-7000,

SECTION 4

NOT APPLICABLE

4 WELDING

REQUIREMEN

TS

S9074-AR-GIB-

010/278, PARAGRAPH 6

NOT

APPLICABLE

S9074-AR-GIB-010/278,

PARAGRAPH 6

MIL-STD-

2185, PARAGRAP

H 5

* - PARAGRAPH 3.4.4 APPLIES 7 of 30 ITEM NO: 009- 12

** - PARAGRAPH 3.10 APPLIES FY-26

TABLE 1

WELDING, FABRICATION, AND INSPECTION OF PIPING, PRESSURE VESSELS, PROPELLERS, AND MACHINERY

COLUMN A B C D E

L I N E

SITUATION

EVOLUTION

CLASS P-1, P-2

AND P-LT PIPING

CLASS P-3a

SPECIAL

CATEGORY,

OTHER CLASS P-

3a, AND P-3b

PIPING

HARD

FACING

VALVE

PARTS

CLASS A

PRESSURE

VESSEL

** PROPULSION

BOILERS

*PROPELLE

RS

(BRONZE)

5 FILLER

MATERIAL

S9074-AR-GIB-

010/278, PARAGRAPH 5

0900-LP-001-7000,

SECTION 5 S9074-AR-GIB-010/278,

PARAGRAPH 5

S9221-C1-GTP-

010/020

DOD-STD-

2185, PARAGRAP

H 5

6 JOINT

DESIGN

S9074-AR-GIB-

010/278, PARAGRAPH 9

MIL-STD-22

0900-LP-001-7000,

SECTION 5

NOT

APPLICABLE

S9074-AR-

GIB-010/278,

PARAGRAP

H 9 MIL-

STD-22

S9221-C1-GTP-

010/020

* - PARAGRAPH 3.4.4 APPLIES 8 of 30 ITEM NO: 009- 12

** - PARAGRAPH 3.10 APPLIES FY-26

TABLE 1

WELDING, FABRICATION, AND INSPECTION OF PIPING, PRESSURE VESSELS, PROPELLERS, AND MACHINERY

COLUMN A B C D E

L I N E

SITUATION

EVOLUTION

CLASS P-1, P-2 AND

P-LT PIPING

CLASS P-3a

SPECIAL

CATEGORY,

OTHER CLASS

P-3a, AND P-3b

PIPING

HARD

FACING

VALVE

PARTS

CLASS A

PRESSURE

VESSEL

** PROPULSION

BOILERS

*PROPELLER

S (BRONZE)

7 HEAT

TREATMENT

S9074-AR-GIB-

010/278, PARAGRAPH 6

0900-LP-001-

7000, SECTION 5

S9074-AR-

GIB-010/278,

PARAGRAPH

S 6 AND 11.6 S9074-AR-

GIB-010/278,

PARAGRAP

H 6

S9221-C1-GTP-

010/020

S9074-AR-

GIB-010/278,

PARAGRAPH

DOD-STD-

2185, PARAGRAPH

8 WORKMANS

HIP

REQUIREMEN

TS

S9074-AR-GIB-

010/278, PARAGRAPH 7

0900-LP-001-

7000, SECTION 5

S9074-AR-

GIB-010/278,

PARAGRAPH

S 7 AND 11.6

S9074-AR-

GIB-010/278,

PARAGRAP

H 7

S9221-C1-GTP-

010/020 S9074-AR-

GIB-010/278,

PARAGRAPH

* - PARAGRAPH 3.4.4 APPLIES 9 of 30 ITEM NO: 009- 12

** - PARAGRAPH 3.10 APPLIES FY-26

TABLE 1

WELDING, FABRICATION, AND INSPECTION OF PIPING, PRESSURE VESSELS, PROPELLERS, AND MACHINERY

COLUMN A B C D E

L I N E

SITUATION

EVOLUTION

CLASS P-1, P-2 AND

P-LT PIPING

CLASS P-3a

SPECIAL

CATEGORY,

OTHER CLASS

P-3a, AND P-3b

PIPING

HARD

FACING

VALVE

PARTS

CLASS A

PRESSURE

VESSEL

** PROPULSION

BOILERS

*PROPELLER

S (BRONZE)

9 VISUAL

INSPECT

JOINT FIT-UP

S9074-AR-GIB-

010/278, PARAGRAPH 9

MIL-STD-22

0900-LP-001-

7000, SECTION 7

NOT

APPLICABLE

S9074-AR-

GIB-010/278,

PARAGRAP

H 9 MIL-

STD-22

S9221-C1-GTP-

010/020 DOD-STD-

2185, PARAGRAPH

10 VISUAL

INSPECTION

S9074-AR-GIB-

010/278, PARAGRAPH 10

MIL-STD-2035,

PARAGRAPH 4

0900-LP-001-

7000, SECTION 7

AND 8

S9074-AR-

GIB-010/278,

PARAGRAPH

11.6.3

MIL-STD-

2035, PARAGRAPH

S9074-AR-GIB-010/278,

PARAGRAPH 10

MIL-STD-2035,

PARAGRAPH 4

MIL-STD-

2035, PARAGRAPH

22 of 30 ITEM NO: 009- 12

FY-26

WELDING/NDT PROCEDURE AND PERSONNEL QUALIFICATION REQUIREMENTS, OR TO DEFINE OTHER

ATTRIBUTES LISTED IN THE "MATERIAL EVOLUTION" LINE OF TABLE 3.

** - THE SUPERVISOR MAY ALSO ALLOW THE SHIPBUILDER TO CHOOSE FROM THE FOLLOWING OPTIONS, PROVIDING:

- THE SHIPBUILDER'S UTILIZATION OF THE FOLLOWING OPTIONS MUST RESULT IN NO ADDITIONAL COST

TO THE GOVERNMENT.

- THE SHIPBUILDER MUST UTILIZE THE FABRICATION DOCUMENT SELECTED FOR THE ENTIRE

AVAILABILITY AND MUST NOT SWITCH BACK AND FORTH BETWEEN DOCUMENTS.

- THE SHIPBUILDER MUST NOTIFY THE SUPERVISOR OF WHICH FABRICATION DOCUMENT HAS BEEN

SELECTED.

OPTIONS:

A) MIL-STD-1689 MAY BE UTILIZED BY THE SHIPBUILDER AT THE SHIPBUILDER'S DISCRETION. THE

REQUIREMENTS OF TABLE 2 ABOVE WOULD THEN APPLY.

B) FOR DETERMINATION OF NDT METHOD(S) AND EXTENT OF NDT INSPECTION WHEN REPAIRS ARE TO BE ACCOMPLISHED, THE SHIPBUILDER MAY REQUEST TO UTILIZE THE SAME NDT REQUIREMENTS THAT WERE INVOKED IN CONSTRUCTION OF THE VESSEL. IN SUCH CASES, THE SHIPBUILDER MUST BE RESPONSIBLE TO DETERMINE THE ORIGINAL NDT REQUIREMENTS AND SUBMIT EVIDENCE SUCH AS

DRAWINGS OR SPECIFICATIONS WHICH DETAIL THE REQUIREMENTS TO THE SUPERVISOR ALONG

WITH A REQUEST FOR APPROVAL.

C) THE SHIPBUILDER MAY REQUEST TO UTILIZE PRE-ESTABLISHED WELDING AND/OR NDT PROCEDURES AND PERSONNEL QUALIFICATION PROGRAM(S) WHICH HAVE BEEN PREVIOUSLY UTILIZED IN THE PERFORMANCE OF SIMILAR ABS-ACCEPTED WORK. IN SUCH CASES, THE SHIPBUILDER MUST SUBMIT EVIDENCE OF SUCH ABS ACCEPTABILITY TO THE SUPERVISOR ALONG WITH DESCRIPTIVE DETAILS AND SUPPORTING DOCUMENTATION FOR THE PROPOSED PROGRAM(S). SUCH DOCUMENTATION MUST

INCLUDE THE WELDING/NDT PROCEDURES AND METHODS OF WELDING/NDT PERSONNEL

QUALIFICATION THAT WERE UTILIZED IN FORMER ABS-ACCEPTED WORK. THE SHIPBUILDER MUST

ALSO SUBMIT OTHER SUPPORTING EVIDENCE THAT MAY BE REQUESTED BY THE SUPERVISOR TO

23 of 30 ITEM NO: 009- 12

FY-26

ESTABLISH THAT THE PROPOSED PROGRAMS HAVE BEEN PREVIOUSLY UTILIZED FOR SIMILAR ABS-

ACCEPTED WORK.

*** - PARAGRAPH 3.8 APPLIES.

ICN: 89MVA15007_00_A01

TITLE: Knukle Crane; install (Part-3, Piping Work)

11. Requirement for Socket welded joint

MATERIAL LIST

PC No. Description STOCK

NUMBER QTY

F-15

COUPLING, 1/2", COUPLING,

6000#, SWLDG X FPT, 316 SS,

ASTM A182

9B 4730 2/EA

P-7

PIPE, 1/2" PIPE, 0.840" OD X

0.187" THK, SCH 80, ASTM A312,

316 SS, SEAMLESS

9B 4730 3/FT

F-9

RDC COUPLING, 3/4" X 1/2",

REDUCING COUPLING, 6000#,

SWLDG, 316 SS, ASTM A182

9B 4730 2/EA

2. Change of requirements

CLASS: ABS/NK

Drawing No.: WPR-20-SUSPI-000

Filler Metal: TG-S308L/316L, DW-308L/316L

(Pipe: K304LTP/K316LPT)

Title: The Welding Procedure Test Result TIG oneside butt welding with gas backing for SUS pipe and CO2 semi-automatic fillet welding without gas backing for SUS pipe

SOLI Q&A Option A_1_Redacted1.pdf

File details come from the government source that posted it. Updated .