N0017822R2501_DRAFT_QA_Responses.xlsx
XLSX spreadsheet 13 KB Posted
- Attached to
- AN/SPQ-15 Data Distribution System Production Federal contract opportunity
- Solicitation number
- N0017822R2501
About this file
This document contains a pre-solicitation synopsis and draft questions and responses related to a federal contract opportunity. The contract will provide production of hardware in support of the AN/SPQ-15(V) MK 6 MOD 1 Data Distribution System, including standard data and distribution systems, switchboards, decoders, converters, switches, and upgrades. The government plans to award a five-year C-type contract utilizing firm-fixed-price, cost-plus-fixed-fee, and not-separately-priced contract line items. The requirement is set aside for small businesses and falls under NAICS code 334118 with PSC codes K012 and 1285. The solicitation number is expected to be N0017822R2501 and will be open for bids from March 7th to April 5th 2022, with award planned for November 2022.
View the file
Other files for this federal contract opportunity
Show all 40
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N0017822R2501 - DRAFT Questions
| Section | Question | Response |
| Section C.4.3.6, Section L.1.4.(c), & Section L.2.6 | These sections state that "all personnel performing any portion of the work under this requirement will possess a personnel clearance at the SECRET level or higher." However, there is no classified hardware to be built on this contract and personnel engaged in activities such as purchasing, material handling, and production will not have access to classified material or information. Personnel engaged in test, software development, and shipboard installation and support may be exposed to classified information. Section C.3.2.6 Data Management states, "The routine use and generation of classified information is not anticipated in this contract." Rather than a blanket requirement for all personnel to hold a Secret clearance, the Government should stipulate which, if any, tasks require a clearance. The following was received from our Defense Counterintelligence and Security Agency Industrial Security Representative: "Eligibility (clearance) requirement is based off of two things, need to know and the individuals access to classified information and or classified spaces. So, you’ll need to reach out either to your company POC for the program OR the customer technical representative for the contract to determine which positions will require a clearance and what access level is required. What I don’t want to happen is you clear all individuals working on a contract, and I come to interview them and they say I’ve never accessed classified information or classified spaces. This would prove there really isn’t a need." | These sections will be updated to state that "All personnel performing engineering, logistics or installation services shall be required to have a minimum DoD "Secret" clearance. |
| Section L.2.7 Subfactor 8 Tab H - Proposed Configuration Changes | This section as written slants the playing field directly to the incumbent and eliminates the possibility of fair and open competition. Only the incumbent with the intimate knowledge of the AN/SPQ-15 can effectively answer this requirement to the level of detail specified. Additionally, this requirement rewards the incumbent financially. The costs associated with performing the effort required to meet the requirements of Tab H will be significant and obviously come out of the Offerors pocket. The incumbent will have to spend much less effort & resources meeting the Tab H requirements due to their “insider” knowledge. We recommend the deletion of this section as a solicitation requirement in total. | This requirement is intended to show the Government how the offeror will implement Engineering, Hardware and Software changes. |
| Section M.3.3 | Section states that "evaluation factors are listed in descending order of importance." Does this same criteria apply to the subfactors under Factor 1: Technical? | Yes. This is stated under the chart in M.3.3. |
| Section L.2.2.(11) | Section states minimum font size shall be 10-point but does not specify a font type. Recommend the Government specify a font type for standardization of responses. Additionally, request clarification if the minimum font size applies to both text and graphics? | This section will be updated to state the font type shall be Times New Roman and that the font size also applies to both text and graphics. |
| Section L.2.3 | Instructions state, "Proposals must be submitted electronically, via Procurement Integrated Enterprise Environment (PIEE) Contracting Communications Module to the Contract Specialist at the e-mail address listed in Block 10.C of the SF 33 in order to be considered for award." Will the Government consider changing this requirement to "Proposals must be submitted electronically, via DoD SAFE."? | DoD SAFE states that it is NOT to be used for contract solicitation or proposal submission. |
| Section L.2.1 | The total page count for the Technical volume (Vol II) is 64 pages. As a non-imcumbant our proposal must address every requirement in sufficient detail assure the Government there is minimal risk in awarding the Best Value contract to a non-incumbant. This will be a significant challange to accomplish in 64 pages. Request the Government increase the Volume II page out to 100 pages. | This section will be updated to 100 pages. |
| CLINS | CLIN x006 (SB-4229), X007 (CV-3989) are tied to SPQ-14 with no drawings. Will the the SPQ-14 missing drawings/TDPs be provided? | Yes. |
| CLINS | CLIN 700X (also 800x and 900x) are various components with no drawings: |
No dwg found for 700xxx for Synchro Generator /N: 500214-1 No dwg found for 700xxx for Quad Digital Azimuth kit P/N: 204534-1 No dwg found for 700xxx for RADDS to synchro Decoder P/N: 204222-3 No dwg found for 700xxx for RADDS to OJ-451 Decoder P/N: 204650-3 No dwg found for 700xxx for RADDS to OJ-194 Decoder P/N: 204850-1 No dwg found for 700xxx for RADDS to 6-wire DX/DY P/N 358010-3 No dwg found for 700xxx for SBC P/N:456570-2
| No dwg found for 700xxx for SBC P/N 456665-1 Will the missing drawings/TDPs be provided? | Yes, with the following exceptions: (1) Drawing for RADDS to 6-wire DX/DY P/N 358010-3 is obselete and will not be provided. (2) Drawing for P/N 456570-2 is obsolete and will not be provided. (3) Drawing for P/N 456665-1 is obsolete and will not be provided. | ||
| General Info | Is this a new requirement or contract renewal? | This is a follow-on contract. | |
| General Info | If renewal, what is current contract number? | N00178-17-D-0026 | |
| General Info | When will the RFP be released? | The solicitation is estimated to be released on or around 4/04/2022. | |
| General Info | If the opportunity presents itself to the Government and in accordance with the authority granted under FAR 6.302-5 for 8(a), 19.1506 for (WOSB), 19.306 (HUBZone), we also respectfully request a noncompetitive procurement for either SBA 8(a), HUBZone, WOSB or EDWOSB. | This contract will be competed as a Small Business set-aside in accordance with FAR Subpart 6.2, Full and Open Competition after the Exclusion of Sources. |
File details come from the government source that posted it. Updated .