Contingency_Design_Program.PDF

Contingency Center of Standardization Executive Summary-Booklet A Contingency Standard Design Program i

TABLE OF CONTENTS Page

Introduction

Design Overview ............................................................................ iii Design Objectives ........................................................................... iii Design Criteria ................................................................................. iv Interface with PAX and AFCS .......................................................... v

Enduring Standard Designs Administration Building, Small Administration Building, Medium Administration Building, Large Barracks, CMU – 40-person Barracks, CMU – 80-person Barracks, CMU – 160-person Barracks, CMU, Pitch Roof – 160-person Medical Facilities – Troop Medical Clinic Medical Facilities – Dental Clinic Joint Operations Center Joint Operations Center, Hardened Tactical Ops Facility Morale Welfare Recreational (MWR) Facilities Dining Facility (DFAC), 400-seat with Kitchen Dining Facility (DFAC), 300-seat without Kitchen ii

Entry Control Point (ECP) – Guard Shack Entry Control Point (ECP) – Pass and ID Building

Guard Towers Warehouse Warehouse, Hardened Warehouse, w/o AC Wash Rack, Theater Level Maintenance Wash Rack, 50 Point Wash Rack, 100 Point Vehicle Maintenance Facility Vehicle Maintenance Facility, Hardened Vehicle Maintenance Facility w/ Paint Booth & Blast Booth Hangar, Fixed Wing Aircraft Hangar, Rotary/Fixed Wing Aircraft Helicopter Pad Fuels Storage System (3 Mil, 7.5 Mil and 10 Mil Gallons) Modular Power Distribution/Supply Sys Modular Water Distribution/Supply Sys Modular Sewage System (Waste Water Treatment System)

Contact Information iii

INTRODUCTION

DESIGN OVERVIEW

The primary focus of the Contingency Standard Designs is to provide standard designs that will meet current and future contingency operational needs in the CENTCOM Area of Responsibility (AOR).

The ultimate goal is to provide standard facility designs that will be constructed using local materials and building methods to reduce the overall construction costs and significantly reduce construction completion timeframes.

DESIGN OBJECTIVE

The overarching objective of the Contingency Standard Designs program is to provide a mechanism or a system that allows the in-experienced user to develop DD Form 1391s that are clearly defined and accurate.

iv

DESIGN CRITERIA

The overall design shall meet the “Temporary” standards specified in the USCENTCOM Regulation 415-1 (“Sand Book”) under the category of Contingency. Each facility design shall include the necessary level of force protection. Each standard design facility is assumed to be located at a secure military installation within a controlled perimeter. Each facility has been designed to include safety and fire prevention to meet minimal military and national building code requirements to the extent possible and practical. In general, each facility design package shall provide a 80% design solution. Each design is generic in nature; modifications will be required to conform to particular site conditions.

CONTINGENCY COS PROGRAM OBJECTIVE

COS Program Objective: Utilize existing standard designs and drawings within the CENTCOM AOR and provide material adaptations which will facilitate the utilization of these designs in other COCOM AORs as appropriate.

v

INTERFACE WITH PAX AND AFCS

Middle East District (TAM): The Middle East District provides quality, responsive engineering, construction, and related services to customers in the Middle East, Central Asia and other areas as required. As a result of government-to-government agreements, the Middle East District designs and builds facilities for deployed U.S. forces in certain countries in the U.S. Central Command (CENTCOM) area of operations. TAM has designed numerous contingency standard designs to support CENTCOM operations.

Programming Automation and Execution System (PAX): PAX provides a secure, automated single source of reliable MILCON programming, budget and execution information; using the best value solutions in support of the Army. The PAX Team supports the DD 1391 PAX Processor. The DD Form 1391 Processor is an “Automated” system to develop project justifications and produce MILCON budget books for submission to Congress.

Army Facilities Component System (AFCS): TAM COS Contingency Designs are loaded into the Software Database currently known as Theater Construction Management System (TCMS). TCMS is designed to Enhance Engineer Performance of Mission Construction Activities.

vi

ADMINISTRATION BUILDING

SMALL

SMALL

FACILITY SIZE: 131m² BLDG DIMENSIONS: 16.6m x 7.4m

OCCUPANT CAP: 10

CATEGORY CODE: 61050

AC TONNAGE: 10.0 Tons (35.5 KW)

FUNCTIONAL FACILITY DESCRIPTION

Hardened Administrative Facility includes operations room, platoon room, communications room, arms room, office, and supply space.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete frame; cmu infill walls full height interior and exterior, painted. Roof; cast-in-place concrete with protective roof system and concrete pavers. Floor; concrete slab on grade.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone systems and may vary due to the utility services and equipment available at the particular site where located.

MEDIUM

MEDIUM

FACILITY SIZE: 360m² BLDG DIMENSIONS: 28m x 12.5m

OCCUPANT CAP: 25

CATEGORY CODE: 61050

AC TONNAGE: 18.5 Tons (65.1 KW)

FUNCTIONAL FACILITY DESCRIPTION

Hardened Administrative Facility includes intelligence and operations room, conference room, communications room, open office space, and offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete frame with cmu infill walls, full height interior and exterior, painted. Roof; cast-in-place concrete protective roof system and concrete pavers. Floor; concrete slab on grade.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

LARGE

FACILITY SIZE: 569m² BLDG DIMENSIONS: 30.4m x 18.4m

OCCUPANT CAP: 50

CATEGORY CODE: 61050

AC TONNAGE: 29 Tons (102.0 KW)

FUNCTIONAL FACILITY DESCRIPTION

Hardened Administrative Facility includes intelligence and operations room, communications room, open office space, and offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete frame with cmu infill walls, full height interior and exterior, painted. Roof; cast-in-place concrete with protective roof system and concrete pavers. Floor; concrete slab on grade

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

BARRACKS, CMU

40-PERSON

40-PERSON

FACILITY SIZE: 551m² BLDG DIMENSIONS: 44m x 12m

OCCUPANT CAP: 40

CATEGORY CODE: 72111

AC TONNAGE: 21 Tons

FUNCTIONAL FACILITY DESCRIPTION

A single story Hardened Barracks to house forty persons, with two 2-person rooms and nine 4-person rooms. Each sleeping quarter has an AC wall mounted unit, and includes showers and toilet facilities.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete Structural Framing, with concrete floors and cmu infill for internal and external walls. Roof; cast-in-place concrete with protective roof system and concrete pavers. Interior stair roof access.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

80-PERSON

80-PERSON

FACILITY SIZE: 1,115m² BLDG DIMENSIONS: 89m x 12m

OCCUPANT CAP: 80

CATEGORY CODE: 72111

AC TONNAGE: 42 Tons

FUNCTIONAL FACILITY DESCRIPTION

A single story Hardened Barracks to house eighty persons, with four 2-person rooms and eighteen 4-person rooms. Each sleeping quarter has an AC wall mounted unit, and includes showers and toilet facilities.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete floors; cmu in-fills for internal and external walls. Roof; cast-in-place concrete with protective roof system and concrete pavers. Interior stair roof access.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

160-PERSON

160-PERSON

FACILITY SIZE: Ground Floor 1,215m² Second Floor 1,215m² Total 2,430m² BLDG DIMENSIONS: 89m x 12m OCCUPANT CAP: Ground Floor 80 Second Floor 80 Total 160

CATEGORY CODE: 72111

AC TONNAGE: 84 Tons

FUNCTIONAL FACILITY DESCRIPTION

A two story Hardened Barracks to house one hundred sixty persons, each floor to have four 2-person rooms and eighteen 4-person rooms. Each sleeping quarter has an AC wall mounted unit, and includes showers and toilet facilities.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing with concrete floors; cmu infill for internal and external walls. Roof; cast-in-place concrete with protective roof system and concrete pavers. Interior stair to second floor and roof access stairs from second floor.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

PITCHED ROOF, 160-PERSON

PITCHED ROOF, 160-PERSON

FACILITY SIZE: Ground Floor 1,200m² Second Floor 1,200m² Total 2,400m² BLDG DIMENSIONS: Ground Floor 89m x 12m OCCUPANT CAP: Ground Floor 80 Second Floor 80 Total occ. 160

CATEGORY CODE: 72111

AC TONNAGE: 84 Tons

FUNCTIONAL FACILITY DESCRIPTION

A two-story Hardened Barracks to house one hundred sixty persons, each floor has four 2-person rooms and eighteen 4-person rooms. Each sleeping quarters has an AC wall mounted unit and includes showers and toilet facilities.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete floors, with prefinished metal roof panels sloped over concrete protective roof system.

Stuccoed cmu internal and external walls. Interior stair to second floor and roof access stairs from second floor.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

MEDICAL FACILITIES

TROOP MEDICAL CLINIC

TROOP MEDICAL CLINIC

FACILITY SIZE: 660m² BLDG DIMENSIONS: 30m x 22m

OCCUPANT CAP: 50

CATEGORY CODE: 55010

AC TONNAGE: 50 Tons (64 KW)

FUNCTIONAL FACILITY DESCRIPTION

Clinic provides for covered drop off area, ambulance room, reception-waiting area, six offices, medical comm. office, public health office, bio admin area, one conference room, medical records and support, CC support, and comm. room. Medical area consists of four exam rooms, one treatment room, one screening room, clean and soiled room, medical storage, and toilet facilities, plus miscellaneous storage rooms.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protective roof system and concrete slab. Exterior reinforced cmu walls and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

DENTAL CLINIC

DENTAL CLINIC

FACILITY SIZE: 630m² BLDG DIMENSIONS: 21m x 30m

OCCUPANT CAP: 46

CATEGORY CODE: 54010

AC TONNAGE: 30 Tons (89.7 KW)

FUNCTIONAL FACILITY DESCRIPTION

Clinic provides reception-waiting area, three 2-person offices, library/conference room, x-ray film processing suite, sterilization room, lab, eight dental chairs, clean and soiled utility rooms, toilet facilities, and miscellaneous storage room.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protective roof system and concrete slab. Exterior reinforced cmu walls, and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

JOINT OPERATIONS CENTER

PLANS

SECTION

FACILITY SIZE: 525m² BLDG DIMENSIONS: 16.4m x 32m

OCCUPANT CAP: 131

CATEGORY CODE: 61050

AC TONNAGE: 14.9 Tons (52.4 KW)

FUNCTIONAL FACILITY DESCRIPTION

Main auditorium has theater style seating with second level secure conference room, four enclosed offices with open office space, communications room, and electrical room. Lower level provides main entry and security check point, office, server room, radio room, and building mechanical support.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Structural steel frame with concrete slab on grade, and prefinished insulated metal roof panels, sloped. Exterior walls are cmu up three meters with prefinished insulated metal panels on upper portions. Interior cmu walls are full height with painted finish, and cast-in-place concrete theater seating tiers. Ceilings are lay-in acoustical tile.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

HARDENED

PLANS

SECTION

HARDENED

FACILITY SIZE: 545m² BLDG DIMENSIONS: 32m x 17m

OCCUPANT CAP: 125

CATEGORY CODE: 61050

AC TONNAGE: 14.9 Tons (52.4 KW)

FUNCTIONAL FACILITY DESCRIPTION

Main Auditorium has theater style seating with second level secure conference room, four offices w/open office space, commutations room, and electrical room. Lower level provides main entry & security check point, office, sever room, radio room, and building mechanical support.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, pre-detonation roof over composite roof deck- bar joists support;

exterior reinforced cmu walls; internal walls of rated gypsum board & cmu full height.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

TACTICAL OPS FACILITY

TACTICAL OPS FACILITY

FACILITY SIZE: 315m² BLDG DIMENSIONS: 25.4m x 12.4m

OCCUPANT CAP: 75

CATEGORY CODE: 14182

AC TONNAGE: 16.8 Tons (59.2 KW)

FUNCTIONAL FACILITY DESCRIPTION

Hardened Ops Facility includes briefing and operations room, communications room, I/O work area, storage room, conference room, and two offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, protective roof system and concrete slab. Exterior reinforced cmu walls, and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

MORALE WELFARE

RECREATIONAL (MWR)

FACILITIES

MORALE WELFARE

RECREATIONAL (MWR)

FACILITIES

FACILITY SIZE: 526m² BLDG DIMENSIONS: 28.6m x 18.4m

OCCUPANT CAP: 117

CATEGORY CODE: 74034

AC TONNAGE: 12.5 Tons (80.5 KW)

FUNCTIONAL FACILITY DESCRIPTION

Hardened MWR Facility provides morale, welfare and recreational functions to installation personnel. Functions include television viewing room, phone center, café, and game room.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protective roof system and concrete slab. Exterior reinforced cmu walls, and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

DINING FACILITY (DFAC)

400-SEAT WITH KITCHEN

400-SEAT WITH KITCHEN

FACILITY SIZE: 1,745m² BLDG DIMENSIONS: 57.4m x 30.4m

OCCUPANT CAP: 411

CATEGORY CODE: 72210

AC TONNAGE: 91.8 Tons

FUNCTIONAL FACILITY DESCRIPTION

Hardened Dining Facility includes kitchen, seating area, and support storage areas. Open seating plan with compartmentalized cmu panels provide protection from blast fragments within the facility.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protective roof system over and slab. Exterior reinforced cmu walls, and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

300-SEAT WITHOUT KITCHEN

300-SEAT WITHOUT KITCHEN

FACILITY SIZE: 685m² BLDG DIMENSIONS: 36.8m x 18.6m

OCCUPANT CAP: 305

CATEGORY CODE: 72210

AC TONNAGE: 20 Tons

FUNCTIONAL FACILITY DESCRIPTION

Hardened Dining Facility includes serving lines, seating area, and support tray return areas. Open seating plan with compartmentalized cmu panels provide protection from blast fragments within the facility. No kitchen, dining only.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protective roof system and concrete slab. Exterior reinforced CMU walls, and internal walls CMU full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

ENTRY CONTROL POINT (ECP)

GUARD SHACKS

SMALL MEDIUM

GUARDHOUSE

GUARD SHACKS

Small Medium Large GuardHouse FACILITY SIZE: 16m² 17.2m² 21.1m² 83.16m² BLDG DIMENSIONS: 4x4 3.6 x 4.8 4.4 x 4.8 5.4 x 15.4

OCCUPANT CAP: N/A

CATEGORY CODE: 85110

AC TONNAGE: - - - 2.87 T

(10.1 KW)

FUNCTIONAL FACILITY DESCRIPTION

The small and large buildings have only one room. The medium facility has a covered entry w/toilet room. Each building (sm, med, large) has windows on three sides. The guard house has a duty room, office, entry, kitchenette, and toilet.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

All guard facilities are concrete structures with cmu walls stucco finish. Small/ Large guard shack have a metal roof and the medium and guard house have concrete roofs.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

PASS AND ID BUILDINGS

SMALL MEDIUM

PASS AND ID BUILDING

Small Medium Large FACILITY SIZE: 24m² 67m² 135m² BLDG DIMS: 4m x 6m 6.7m x 9.9m 9.0m x 14.8m

OCCUPANT CAP: N/A

CATEGORY CODE: 85110

AC TONNAGE: 1.4T(5KW) 3.13T (11KW) 4.17T(14.7KW)

FUNCTIONAL FACILITY DESCRIPTION

Small Pass/ID has a guard’s room and a waiting room. The Medium Pass/ID provides a guard office, pass ID office, and personnel search room, with a lay-in ceiling. The Large Pass/ID provides a customer service space, pass-ID rm, office, conference room, toilet facilities, and utility room.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

All three Pass & ID Facilities are concrete structures with cmu walls stucco finish with concrete roof structures.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

GUARD TOWER

TYPE 1 TYPE 2

UNPROTECTED PROTECTED

GUARD TOWER

Type 1 Type 2

UNPROTECTED PROTECTED

FACILITY SIZE: 9m² 20m² BLDG DIMENSIONS: 3m x 3m 4.4m x 4.4m

OCCUPANT CAP: N/A

CATEGORY CODE: 87210

AC TONNAGE: N/A

FUNCTIONAL FACILITY DESCRIPTION

Guard Tower unprotected (1) sits on a concrete support with an exterior ships ladder for access with a search light on the roof.

The Guard Tower (2) has a concrete enclosed base with a ladder inside to get to the viewing platform.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

The guard tower facilities are concrete structures. A roof structure for unprotected (1) has a metal roof and the protected tower (2) has a concrete roof.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

WAREHOUSE

WAREHOUSE

FACILITY SIZE: 5,570m² BLDG DIMENSIONS: 121.6m x 45.8m

OCCUPANT CAP: 10

CATEGORY CODE: 44220

AC TONNAGE: 60.2 Tons (212 KW)

FUNCTIONAL FACILITY DESCRIPTION

Main storage area supported by two tool rooms, comms room, toilet facilities, two mech/elec rooms, plus second level offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Pre-engineered building; steel frame, concrete slab on grade, sloped prefinished metal panel. Exterior walls; cmu, interior face lined with insulation and gypsum board, painted. Prefinished metal panel siding above cmu. Interior walls; painted cmu with bar joist and metal deck ceiling. Second level office with bar joist and metal deck ceiling. Steel stairs.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

WAREHOUSE, HARDENED

WAREHOUSE, HARDENED

OCCUPANT CAP: 10

CATEGORY CODE: 44220

AC TONNAGE: 60.2 Tons (212 KW)

FUNCTIONAL FACILITY DESCRIPTION

Main storage area supported by two tool rooms, comms room, toilet facilities, two mech/elec rooms, plus second level offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and pre-detonation roof over composite roof deck on bar joists support. Exterior walls are reinforced insulated cmu, and internal walls are full height cmu.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

WAREHOUSE w/o AC

WAREHOUSE w/o AC

OCCUPANT CAP: 50

CATEGORY CODE: 44220

AC TONNAGE: 4.8 Tons

FUNCTIONAL FACILITY DESCRIPTION

Main storage area supported by two tool rooms, comm room, toilet facilities, two mech/elec rooms, plus two offices.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Pre-engineered building; steel frame, concrete slab on grade, sloped prefinished metal panel. Exterior walls; cmu, interior face lined with insulation and gypsum board, painted. Prefinished metal panel siding above cmu. Interior walls; painted cmu with bar joist and metal deck ceiling. Second level office with bar joist and metal deck ceiling.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

WASH RACK

THEATER LEVEL

MAINTENANCE

WASH RACK THEATER

LEVEL MAINTENANCE

FACILITY SIZE: 600m² BLDG DIMENSIONS: 30m x 20m

OCCUPANT CAP: 2

CATEGORY CODE: 14962

AC TONNAGE: N/A

FUNCTIONAL FACILITY DESCRIPTION

The Wash Rack is designed for the washing and maintenance of three large vehicles, with a small building for mechanical equipment and supply storage.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Metal building system; steel frame, prefinished metal roof panels, concrete slab wash floor. Mechanical/storage building;

concrete floor slab, cmu walls full height, painted, metal joist roof supports with prefinished metal fascia panels, and pre-finished metal roof panels.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

50 POINT

50 POINT

FACILITY SIZE: 500m² BLDG DIMENSIONS: 28.7m x 17.4m

OCCUPANT CAP: 18

CATEGORY CODE: 14962

AC TONNAGE: 12 Tons

FUNCTIONAL FACILITY DESCRIPTION

The 50 Point Wash Rack has a general purpose bldg, pump bldg, water storage tank, holding tanks, waste water collection tank, and generator. The wash rack area is concrete slab with center trench and the remaining surface is graveled.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

General Purpose Bldg is a pre-engineered building; steel frame, concrete slab on grade, exterior prefinished metal panel siding with insulation and gypsum board interior face, painted.

Prefinished, sloped metal roof panels. Interior walls; gypsum board full height, painted. Cmu wall at mech/elec room. Office area has lay-in ceiling.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

100 POINT

100 POINT

FACILITY SIZE: 500m² BLDG DIMENSIONS: 28.7m x 17.4m

OCCUPANT CAP: 18

CATEGORY CODE: 14962

AC TONNAGE: 12 Tons

FUNCTIONAL FACILITY DESCRIPTION

The 100 Point Wash Rack has a general purpose bldg, pump bldg, water storage tank, holding tanks, waste water collection tank and generator. The wash rack area is concrete slab with center trench and the remaining surface is graveled.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

The General Purpose Bldg is a pre-engineered building: steel frame, concrete slab on grade, exterior prefinished metal panel siding with insulation and gypsum board interior face, painted.

Prefinished, sloped metal roof panels. Interior walls; gypsum board full height, painted. Cmu wall at mech/elec room. Office area has lay-in ceiling.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

VEHICLE MAINTENANCE

FACILITY

FACILITY

FACILITY SIZE: 1,620m² BLDG DIMENSIONS: 64.8m x 25m

OCCUPANT CAP: 37

CATEGORY CODE: 21410

AC TONNAGE: 11.45 Tons (40.3 KW)

FUNCTIONAL FACILITY DESCRIPTION

Maintenance Facility housing ten vehicle bays, two 32-metric ton bridge cranes, tool room, battery room, shop storage, open office area with one enclosed office.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Pre-engineered metal building system, with concrete floor, cmu exterior walls, painted, up 3 meters, with insulated prefinished metal panel above. Interior walls; gypsum board and cmu, full height, painted. Pre-finished metal insulated roof panels.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

FACILITY, HARDENED

FACILITY, HARDENED

FACILITY SIZE: Base Facilities 1,620m² Option 480m² Base + Opt. 2,100m² BLDG DIMENSIONS: Base Facilities 25m x 64.8m Option 25m x 19.2m Base + Opt. 25m x 84m OCCUPANT CAP: Base Facilities 31 Option 4 Base + Opt. 35

CATEGORY CODE: 21410

AC TONNAGE: 11.45 Tons (40.3 KW)

FUNCTIONAL FACILITY DESCRIPTION

Maintenance Facility housing ten vehicle bays, two 32-metric ton bridge cranes, tool room, battery room, shop storage, open office area with enclosed office. Option has paint and bead blast booth with storage and mech/elec room support for each booth.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, pre-detonation roof over composite roof deck over bar joists supports. Exterior walls are reinforced cmu, and internal walls are full height cmu.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

FACILITY, w/ PAINT BOOTH

& BLAST BOOTH

FACILITY, w/ PAINT BOOTH

& BLAST BOOTH

FACILITY SIZE: 2,100 m² BLDG DIMENSIONS: 25m x 84m

OCCUPANT CAP: 35

CATEGORY CODE: 21410

AC TONNAGE 11.45 Toms (40.3 KW)

FUNCTIONAL FACILITY DESCRIPTION

Maintenance Facility housing ten vehicle bays, two 32-metric ton bridge cranes, tool room, battery room, shop storage, and open office area with enclosed office. Paint and bead blast booths with storage and mech/elec room support for each booth.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, pre-detonation roof over composite roof deck on bar joists support.

Exterior walls are reinforced cmu, and internal walls are rated gypsum board and cmu, full height.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

HANGAR, FIXED

WING AIRCRAFT

HANGAR, FIXED

FACILITY SIZE: 4,415m² BLDG DIMENSIONS: 104.8m x 42.2m

OCCUPANT CAP: 16

CATEGORY CODE: 21110

AC TONNAGE: 174.1 Tons

FUNCTIONAL FACILITY DESCRIPTION

Facility houses two C-130 aircraft maintenance bays, including one fuel cell bay with fuel test room, mechanical room, toilet and break rooms, isochronal bay, 5-ton crane, and fire protection and communications rooms.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Steel structural frame, with prefinished sloped metal roof panels on steel trusses. Exterior wall is 3-meter high cmu with prefinished insulated metal siding panels above. Interior walls are cmu up to mezzanine, with concrete slab roof. Full height fire rated wall between hangar bays. Detached pre-engineered mechanical building.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

HANGAR, ROTARY/FIXED

HANGAR, ROTARY/FIXED

FACILITY SIZE: 12,491m² BLDG DIMENSIONS: Ground Floor 10,515 m² First Floor 1,121 m² Second Floor 855 m²

OCCUPANT CAP: 125

CATEGORY CODE: 21110

AC TONNAGE: 533 Tons

FUNCTIONAL FACILITY DESCRIPTION

Hangar facilities with three rotary wing bays and one fixed-wing bay. Multi-level center core support area includes crew/ ready/briefing rooms, administration offices, arms room, armament shop, avionics shops, and offices. Support facilities include supply rooms, welding and engine shops, tool storage, and sheet metal shop.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural frame, prefinished sloped metal roof panels on steel trusses at hangar bays, cmu w/stucco finish and prefinished insulated metal siding panels above. Interior walls;

cmu up to structure with concrete slab roof/protected roof membrane over support areas, mech/elec rooms.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

HELICOPTER PAD

HELICOPTER PAD

FACILITY SIZE: 381,600m² BLDG DIMENSIONS: 480m x 795m - pad

OCCUPANT CAP: N/A

CATEGORY CODE: 11130

AC TONNAGE: N/A

FUNCTIONAL FACILITY DESCRIPTION

Landing pads and aprons to accommodate arrival and departure of rotary wing aircraft.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

The two Helicopter Pads are designed with approach and departure surfaces, lighted wind cones, and static ground points.

(No building structures.)

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

FUELS STORAGE SYSTEM

(3 Mil; 7.5 Mil and 10 Mil Gallons)

SITE PLAN

CONTROL BUILDING

FUELS STORAGE SYSTEM

(3 Mil; 7.5 Mil and 10 Mil Gallons)

FACILITY SIZE: 138m² BLDG DIMENSIONS: 8.4m x 16.4m

OCCUPANT CAP: 5

CATEGORY CODE: 12630

AC TONNAGE: 6.39 Tons (22.5 KW)

FUNCTIONAL FACILITY DESCRIPTION

Control Building provides a control room with laboratory furnished with bench work and sink along with a toilet room and mechanical space.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing, concrete slab on grade, and protected membrane roof system over sloped concrete slab.

Exterior reinforced cmu walls, and internal walls cmu full height, painted.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

MODULAR POWER

DISTRIBUTION/SUPPLY

SYSTEM

MODULAR POWER

FACILITY SIZE: 183.4m x 144.5m 26,500 m²

BLDG DIMS:

Switchgear Bldg. 42.6m x 7m 299 m² Sunshade Trans. Pad 17.2m x 7m 120.4m²

OCCUPANT CAP: 3

CATEGORY CODE: 81117

AC TONNAGE: Switchgear Bldg-28 Tons (98.7 KW)

FUNCTIONAL FACILITY DESCRIPTION

Large open switchgear area with battery room and toilet facilities at building end near building entry. Transformers provided with sun shade.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Structural steel frame with concrete slab on grade, prefinished roof panels sloped, exterior walls cmu up three meters w/ prefinished metal panels and interior cmu full height w/painted finish. Sunshade Transformer pad; Steel column with sloped K-span roof.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

MODULAR WATER

TREATMENT BUILDING

MODULAR WATER

FACILITY SIZE: 183m x 144m 26,535m²

BLDG DIMENSIONS:

Treatment Bldg. 46.25m x 22.75m 1,052m² Well House 4.7m x 2.7m 13m²

OCCUPANT CAP: 3

CATEGORY CODE: 81117

AC TONNAGE:

Treatment Bldg. 11.23 Tons (39.5 KW) Well House N/A

FUNCTIONAL FACILITY DESCRIPTION

Large water treatment room with chemical storage room, water testing laboratory with supporting MCC/control room, mechanical room, and with building toilet facilities.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Structural steel frame with concrete slab on grade, prefinished insulated metal roof panels sloped, exterior walls cmu up three meters w/prefinished insulated metal panels and interior cmu full height w/painted finish.

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

MODULAR SEWAGE SYSTEM

(WASTE WATER

TREATMENT SYSTEM)

CONTROL BUILDING

MODULAR SEWAGE SYSTEM

(WASTE WATER

TREATMENT SYSTEM)

FACILITY SIZE: 188m x 144m 27,072m²

BLDG DIMENSIONS:

Control Bldg. 69m x 14.5m 1,000m²

OCCUPANT CAP: 4

CATEGORY CODE: 81117

AC TONNAGE: 5.2 Tons (18.5 KW)

FUNCTIONAL FACILITY DESCRIPTION

Control building is divided into an office area with toilet facilities, chemical storage room, and water testing laboratory with supporting mechanical/electrical room.

ARCHITECTURAL AND STRUCTURAL SYSTEMS

Concrete structural framing with concrete slab on grade, protected membrane roof system over sloped concrete slab;

exterior reinforced cmu walls; internal walls cmu full height painted

MECHANICAL AND ELECTRICAL SYSTEMS

The mechanical and electrical systems will be stand-alone

CONTACT INFORMATION:

Plans for the facilities represented in this document are available from the U.S. Army Corps of Engineers – Middle East District

Middle East District

U.S. Army Corps of Engineers Attn: Chief, Contingency Standards (James Robb) P.O. 2250 Winchester, VA 22604 -1450 Phone: 540-665-4019 n0ectdsa Typewritten Text Email: TCXCOSMED@usace.army.mil

40-PERSON

BARRACKS, CMU

80-PERSON

BARRACKS, CMU

160-PERSON

GUARD TOWER

AC

50 POINT

SYSTEM