TLRFIA-over-Steel-Model.pdf

This is a technical specification sheet for Tremco Low Rise Foam Insulation Adhesive application procedures related to a roofing project. The document provides detailed installation guidelines for applying foam insulation boards to steel roof decks. Key application requirements include placing insulation boards into the adhesive within 15 seconds of foam initiation, applying adhesive at 12 inches on center in the field of the roof at four beads per board, increasing to 6 inches on center in perimeter areas at eight beads per board, and 4 inches on center in corner areas at twelve beads per board. Ideal ambient temperature for application is 45 degrees Fahrenheit and rising, with material temperature maintained between 70 and 85 degrees Fahrenheit. Critical installation notes specify that boards must be stepped into place without repositioning once set, and adhesive must not be puddled or mounded to prevent excessive rise and uneven board surfaces.

The document does not contain information regarding pricing terms, contract duration, funding sources, bid submission dates, or other commercial terms associated with a procurement opportunity. This appears to be a technical specification drawing intended to establish installation standards for a roofing insulation project rather than a standalone bidding document.