Gutter-Flashing-Model.pdf

This is a technical drawing specification document for gutter flashing installation details. The document, designated as Drawing No. 53, provides a comprehensive visual model for proper gutter flashing construction and assembly. The specification details the integration of multiple materials and components, including Tremply Kee membrane, Tremco metal products, galvanized annular ring shank nails, wood blocking, aluminum tape, and flashing strips. The drawing specifies precise installation requirements, such as fastening wood blocking at 250 LBF/FT using nails spaced 3 inches on center, membrane attachment with hot air welding techniques, and continuous galvanized metal cleats for joint treatment. Flashing strips are specified as 4 inches minimum width with 2-inch wide sections for overlap, featuring aluminum tape 4 inches wide that is heat-welded in place. The document indicates insulation attachment per specification requirements and includes edge flashing strip details with specific gap measurements of 1/4 inch.

This technical specification drawing does not contain information regarding pricing terms, set-asides, contract incumbents, funding sources, or other commercial contract elements. The document serves as a reference standard for construction or renovation work involving roof gutter systems and represents technical requirements rather than a complete solicitation or bid package.