TE-09q Fugitive Dust Control Form 17-Trackout.pdf

Environmental Programs FDCP-17 Air Quality Program Revision 0

Dugway Proving Ground Fugitive Dust Control Plan Form 17 Roads, Paved and Unpaved

Trackout Prevention and Cleanup of Mud, Silt and Soil Tracked onto Paved Roads Activity Description: The depositing of mud, silt and soil onto paved roads by vehicles or equipment.

General Information

Location(s): Start Date: End Date:

Point of Contact: Email: Phone Number:

Description of site:

Fugitive Dust Emission Control Techniques Select at least one best management practice (BMP) for each critical mitigation area:

Prevent dust from trackout

BMP 17-01 Clean trackout at the end of the work shift from paved surfaces to maintain dust control.

BMP 17-02 Maintain dust control during working hours and clean trackout from paved surfaces at the end of the work shift/day.

BMP 17-03

Install gravel pad(s), clean, well-graded gravel or crushed rock. Minimum dimensions must be 30 feet wide by 3 inches deep, and, at minimum, 50' or the length of the longest haul truck, whichever is greater. Re-screen, wash or apply additional rock in gravel pad to maintain effectiveness.

BMP 17-04 Install wheel shakers. Clean wheel shakers on a regular basis to maintain effectiveness.

BMP 17-05 Install wheel washers. Maintain wheel washers on a regular basis to maintain effectiveness.

BMP 17-06 Motorized vehicles will only operate on paved surfaces.

BMP 17-07 Install cattle guard before paved road entrance.

All exiting traffic must be routed over selected trackout control device(s) BMP 17-08 Clearly establish and enforce traffic patterns to route traffic over select trackout control device(s).

BMP 17-09 Limit site accessibility to routes with trackout control devices in place by installing effective barriers on unprotected routes.

Trackout Prevention In accordance with Utah Administrative Code R307-205-6(2), any person(s) performing fugitive dust emission activities will to the maximum extent possible, keep material from being deposited onto any paved road other than a designated deposit site. Any such person(s) who deposits materials that may create fugitive dust on a paved road shall clean the road promptly.

*By signing you attest that you have read and understand the requirements of the DPG FDCP and will follow the BMPs you have selected.

Signature Date This form is to be completed and kept on record according to the requirements found in the Dugway Proving Ground (DPG) Fugitive Dust Control Plan (FDCP). Copies of form(s) shall be provided to EP, Air Program Manager, upon the completion of operation(s) and/or annually at the end of each calendar year whichever occurs first. Submit completed form in hardcopy or electronically, via email to Environmental Program’s (EP) Air Program Manager:

boyd.roberts.civ@mail.mil