1602000 J Electrical Amendment 0003.pdf

Section J Documents, Exhibits, and Other Attachments

Table of Contents

Attachment Number

Attachment Title

J-1602000-01 Definitions and Acronyms J-1602000-02 References and Technical Documents J-1602000-03 Contractor Provided Electrical Generation Plant Equipment and Distribution

Systems Description and Inventory J-1602000-04 Layout Of Power Distribution From Generators J-1602000-05 Single Line Diagram Generator-Fed Facilities J-1602000-06 Generator Inventory (Non-Contractor Provided)

Attachment J-1602000-01 Definitions and Acronyms

Definition Description Equipment, Collateral Encompasses built-in and large substantially affixed equipment/property that is normally acquired and installed as part of a facility project.

Equipment, Installed Encompasses building-type equipment, built-in equipment, and large, substantially affixed equipment/property, and is normally acquired and installed as part of a facility project. Installed equipment is normally required to make a facility useful and operable. Removing such equipment would impair the usefulness, safety, or environment of the facility or the facility restoration work required after its removal, is substantial.

Equipment, Personal Property Personal property equipment includes all equipment other than collateral equipment. Such equipment, when acquired and used in a facility or a test apparatus, can be severed and removed after erection or installation without substantial loss of value or damage thereto or to the premises where installed.

Facilities Life Cycle A facilities life cycle is divided into four stages, requirements (planning and design), acquisition (construction and acceptance), stewardship (operations, maintenance and repair), and disposal.

Facilities Maintenance Management

The planning, prioritizing, organizing, controlling, reporting, evaluating, and adjusting of facilities maintenance operations to support the CNO/NAVFAC facilities policy and objectives and satisfy customers’ facility needs. Defined by the International Facility Management Association as “the practice of coordinating the physical workplace with the people and work of the organization.”

High Voltage Transmission Transmission of electrical loads greater than 69 kilovolts (KV).

Integrated Maintenance Plan IMP is a recurring state-of-the-art, reliability-centered inspection, testing, maintenance and repair program that determines best practices for managing the functions and consequences of failures of facilities equipment and system components. IMP encompasses accepted commercial practices, including reactive, preventive, predictive and proactive maintenance, into one optimal program. The IMP approach gives the Contractor full responsibility to maintain systems and equipment and perform repairs whenever necessary to ensure equipment and systems are operational and remain in a constant state of readiness.

Life-Cycle Costs A form of economic analysis that considers the total cost of owning, operating, and maintaining a building or system over its useful life.

Low Voltage Distribution Distribution of electrical loads less than or equal to 600 volts (V).

Medium Voltage Distribution Distribution of electrical loads ranging from greater than 600 V up to and including 69 KV.

Repair Repair is the restoration of facilities or equipment to such a condition that it may be effectively utilized for its designated purposes by overhaul, reconstruction, or replacement of constituent parts or materials which have deteriorated by action of the elements or usage, and which have not been corrected through maintenance. This term also applies to replacement of the entire unit or system if beyond economical repair. The intent of repair is to have the equipment at normal working condition.

Replacement Replacement, as a distinct work element, is confined to a program of planned replacement of a facility or its components. It may be further limited to major components such as air conditioning compressors, furnaces or hot water heaters. Replacement is performed when the equipment has reached the end of its useful life; when it no longer can perform due to degradation of its internal components and repair is no longer cost effective. Included under the replacement would be the major rebuilding of any component, since rebuilding also restores performance.

SCADA A version of telemetry commonly used in wide-area industrial applications, such as electrical power generation and distribution and water distribution, which includes supervisory control of remote stations as well as data

Attachment J-1602000-01 Definitions and Acronyms

Definition Description Acronym Title

AC Alternating Current (electricity)

ANSI American National Standards Institute

ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers

ASME American Society of Mechanical Engineers

BPVC Boiler and Pressure Vessel Code

IMP Integrated Maintenance Program NEC National Electrical Code NFPA National Fire Protection Association SCADA Supervisory Control and Data Acquisition SRM Sustainment, Restoration and Modernization

UFC Unified Facilities Criteria

UPV Unfired Pressure Vessel

Attachment J-1602000-02

References and Technical Documents

Reference Title MO-209 Engineering Criteria UFC 3-430-02FA Central Steam Boiler Plants UFC 3-430-07 Operations and Maintenance: Inspection and Certification of Boilers and

Unfired Pressure Vessels UFC 3-430-08N Central Heating Plants UFC 3-501-01 Electrical Engineering UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-560-01 Electrical Safety. O&M NAVFAC P-307 Management of Weight Handling Equipment Department of the Army.

AR 420-49 Heating, Energy Selection and Fuel Storage, Distribution, and Dispensing Systems TM 5-811-6 Electric Power Plant Design TM 5-815-1 Air Pollution Control Systems Boilers and Incinerators

Non-Government Publications.

American Association of State Highway and Transportation Officials, (AASHTO) 444 North Capital Street, N.W., Suite 249, Washington, DC 20001

American Boiler Manufacturers Association (ABMA) 950 N. Glebe Road, Suite 160, Arlington, VA 22203

American Concrete Institute (ACI) P.O. Box 19150, Redford Station, Detroit, MI 48219-0150

American Gear Manufacturers Association (AGMA) 1500 King Street, Suite 201, Alexandria, VA 22314

American National Standards Institute, Inc. (ANSI) 11 West 42nd Street, New York, NY 10036

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Publication Dept. 1791 Tullie Circle, N.E., Atlanta, GA 30329

ASHRAE (1991) Handbook, HVAC Applications ASHRAE (1992) Handbook, HVAC Systems and Equipment ASHRAE (1993) Handbook, Fundamentals ASHRAE (1990) Handbook, Refrigeration Systems and Applications

ATTACHMENT J-1602000-03

CURRENT ELECTRICAL POWER GENERATION PLANT AND TRANSMISSION AND DISTRIBUTION

SYSTEM DESCRIPTION AND INVENTORY

- The existing power generation system consists of four eight (8) fuel fed generators with a capacity of 1000 500 kva for a total of 4000 kva. Fuel is supplied from two above ground fuel tanks.

- A synchro panel is connected to the generators for power distribution to the facilities by means of seven panels located around the facilities.

- The fuel generation is confined though a chain link fence equipped with two vehicle access gates and one pedestrian gate.

- Electrical cables from the generators to the seven distribution panels are buried. Cables are surface installed from distribution panel #5 to the secured area.

ATTACHMENT J-1602000-04

LAYOUT OF POWER DISTRIBUTION FROM GENERATORS

See separate .pdf file: “J-1602000-04 LAYOUT OF POWER DISTRIBUTION FROM GENERATORS.pdf”

ATTACHMENT J-1602000-05

SINGLE LINE DIAGRAM GENERATOR-FED FACILITIES

See separate .pdf file: “J-1602000-05 SINGLE LINE DIAGRAM-GENERATORS FED FACILITIES.pdf”

ATTACHMENT J-1602000-06

Non-Contractor Provided Generator Inventory

Location Generator Type Model Quantity Remarks

Oman - Tidmar Island

Caterpillar Diesel 220 kVA

Genset 400/230V, 50 Hz

3 Host Nation Operated