Flashing-for-Non-Wall-Supported (1).pdf

This is a technical drawing specification document for built-up roof hot/cold wall flashing for non-wall-supported deck construction. The drawing (DWG No. 11) details the installation requirements for a specified Bureau of Roofing (BUR) membrane system with two-ply fasteners spaced at eight-inch on-center intervals. The specification includes a one-piece counterflashing, specified sealant application, and specified insulation materials. The roof deck assembly incorporates gravel surfacing installed into a reglet and secured with lead wedges at eight-inch on-center spacing, a flexible vapor retarder serving as an insulation retainer, compressible insulation, and wood nailers secured to the deck with appropriate fasteners in two staggered rows at twenty-four-inch on-center spacing. Additional components include stripping base flashing in twelve-inch on-center staggered rows, wood blocking in two rows, and wood cant nailed to the sheet, with a four-inch minimum measurement specification noted.

No pricing terms, contract award dates, response deadlines, or procurement-related information is contained within this technical drawing. The document serves solely as a construction specification guide and does not address procurement timeline, funding sources, set-asides, or other contractual elements relevant to a solicitation process.