Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 08 56 53

BLAST RESI STANT TEMPERED GLASS WI NDOWS

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ALUMI NUM ASSOCI ATI ON ( AA)

AA DAF45 ( 2003; Reaf f i r med 2009) Desi gnat i on Syst em f or Al umi num Fi ni shes

AMERI CAN ARCHI TECTURAL MANUFACTURERS ASSOCI ATI ON ( AAMA)

AAMA 2603 ( 2015) Vol unt ar y Speci f i cat i on, Per f or mance Requi r ement s and Test Pr ocedur es f or Pi gment ed Or gani c Coat i ngs on Al umi num Ext r usi ons and Panel s

AAMA 2604 ( 2013) Vol unt ar y Speci f i cat i on, Per f or mance Requi r ement s and Test Pr ocedur es f or Hi gh Per f or mance Or gani c Coat i ngs on Al umi num Ext r usi ons and Panel s

AAMA/ WDMA/ CSA 101/ I . S. 2/ A440 ( 2011; Updat e 1 2014) Nor t h Amer i can Fenest r at i on St andar d/ Speci f i cat i on f or Wi ndows, Door s, and Skyl i ght s

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

ANSI Z97. 1 ( 2015) Saf et y Gl azi ng Mat er i al s Used i n Bui l di ngs - Saf et y Per f or mance Speci f i cat i ons and Met hods of Test

ASTM I NTERNATI ONAL ( ASTM)

ASTM C1048 ( 2012; E 2012) St andar d Speci f i cat i on f or Heat - Tr eat ed Fl at Gl ass - Ki nd HS, Ki nd FT Coat ed and Uncoat ed Gl ass

ASTM C509 ( 2006; R 2015) El ast omer i c Cel l ul ar Pr ef or med Gasket and Seal i ng Mat er i al

ASTM C920 ( 2014a) St andar d Speci f i cat i on f or El ast omer i c Joi nt Seal ant s

GLASS ASSOCI ATI ON OF NORTH AMERI CA ( GANA)

GANA Gl azi ng Manual ( 2009) Gl azi ng Manual

Apr i l 2019 Page 1 SECTI ON 08 56 53

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Wi ndow uni t s; G

Submi t dr awi ngs i ndi cat i ng el evat i ons of wi ndows, f ul l - s i ze sect i ons, t hi ckness of met al , f ast eni ngs, pr oposed met hod of anchor i ng, s i ze and spaci ng of anchor s, det ai l s of const r uct i on, compl et e det ai l s of set t i ng met hods and mat er i al s f or each t ype of gl azi ng mat er i al , det ai l s of har dwar e, mul l i on det ai l s, met hod and mat er i al s f or weat her st r i ppi ng, suppor t condi t i ons f or t he gl ass, mat er i al and met hod of at t achi ng subf r ames, st ool s, casi ngs, s i l l s , t r i m, i nst al l at i on det ai l s, and ot her r el at ed i t ems.

SD- 03 Pr oduct Dat a

Wi ndow uni t s; G

Hardware

Set t i ng mat er i al s

Weatherstripping

Submi t wi ndow f r ame dat a f or each t ype and f i ni sh.

SD- 04 Sampl es

Wi ndow uni t s

Submi t when f act or y- f i ni shed col or coat i ng i s pr ovi ded.

SD- 08 Manuf act ur er ' s I nst r uct i ons

Glass

Submi t gl ass manuf act ur er ' s i nst r uct i ons f or set t i ng and seal i ng mat er i al s and f or i nst al l at i on of each t ype of gl azi ng mat er i al specified.

SD- 10 Oper at i on and Mai nt enance Dat a

Wi ndow uni t s, Dat a Package 1; ; G

Submi t dat a package i n accor dance wi t h Sect i on 01 78 23

OPERATI ON AND MAI NTENANCE DATA.

1. 3 QUALI TY ASSURANCE

1. 3. 1 Label

Each pr i me wi ndow uni t shal l bear t he AAMA Label war r ant i ng t hat t he pr oduct compl i es wi t h AAMA/ WDMA/ CSA 101/ I . S. 2/ A440. Cer t i f i cat es of

Apr i l 2019 Page 2 SECTI ON 08 56 53

Compl i ance at t est i ng t hat t he pr i me wi ndow uni t s meet t he r equi r ement s of AAMA/ WDMA/ CSA 101/ I . S. 2/ A440 wi l l be accept abl e i n l i eu of pr oduct labeling.

1. 3. 2 Gl ass and Gl azi ng

Pr ovi de mat er i al s t hat ar e cer t i f i ed t o meet ANSI Z97. 1 by an i ndependent t est i ng l abor at or y.

1. 3. 3 I ndependent Test i ng

Test i ng shal l be per f or med by an i ndependent t est i ng l abor at or y ( cer t i f i ed by t he Cont r act i ng Of f i cer ) and t est r epor t shal l be s i gned by a r egi st er ed pr of essi onal engi neer and shal l i ncl ude r esul t s f r om t est s i n t he cal cul at i ons.

1. 4 DELI VERY, STORAGE, AND HANDLI NG

a. Del i ver pr oduct s t o t he s i t e i n unopened cont ai ner s, l abel ed pl ai nl y wi t h manuf act ur er s ' name and br ands. Del i ver wi ndow assembl i es i n an undamaged condi t i on. Exer ci se car e i n handl i ng and hoi st i ng wi ndows dur i ng t r anspor t at i on and at t he j ob s i t e.

St or e wi ndows and component s out of cont act wi t h t he gr ound, under a weat her t i ght cover i ng, so as t o pr event bendi ng, war pi ng, or ot her wi se damagi ng t he wi ndows.

b. Fi ni shed sur f aces shal l be pr ot ect ed dur i ng shi ppi ng and handl i ng usi ng t he manuf act ur er ' s st andar d met hod, except t hat no coat i ngs or l acquer s shal l be appl i ed t o sur f aces t o whi ch seal ant s, caul k i ng, or gl azi ng compounds must adher e.

1. 5 ENVI RONMENTAL CONDI TI ONS

Do not st ar t gl azi ng wor k unt i l t he out door t emper at ur e i s above40 degr ees F and r i s i ng unl ess appr oved pr ovi s i ons ar e made t o war m t he gl ass and r abbet sur f aces. Pr ovi de suf f i c i ent vent i l at i on t o pr event condensat i on of moi st ur e on gl azi ng wor k dur i ng i nst al l at i on. Do not per f or m gl azi ng wor k i f moi st ur e col l ect s on wi ndow assembl i es or dur i ng r ai ny weat her .

PART 2 PRODUCTS

2. 1 WI NDOW UNI TS

Pr i med wi ndow f r ames shal l conf or m t o AAMA/ WDMA/ CSA 101/ I . S. 2/ A440 and t he r equi r ement s speci f i ed her ei n. Pr ovi de wi ndows of t ypes, gr ades, per f or mance cl asses, combi nat i ons, and si zes i ndi cat ed or speci f i ed.

Pr ovi de wi ndows t o accommodat e har dwar e, gl ass, weat her st r i ppi ng and accessor i es. Each wi ndow shal l be a compl et e f act or y- assembl ed uni t wi t h gl ass f act or y or f i el d i nst al l ed.

2. 2 WEATHERSTRIPPING

Weat her st r i ppi ng shal l conf or m t o AAMA/ WDMA/ CSA 101/ I . S. 2/ A440.

2. 3 GLASS

Use ASTM C1048 and ANSI Z97. 1 Gr ade B ( t emper ed) , St y l e I ( uncoat ed) , Type 2, Cl ass 1 ( t r anspar ent ) .

Apr i l 2019 Page 3 SECTI ON 08 56 53

2. 4 SETTI NG MATERI ALS

Pr ovi de t ypes r equi r ed f or t he appl i cabl e set t i ng met hod speci f i ed i n t he GANA Gl azi ng Manual , unl ess speci f i ed ot her wi se her ei n. Do not use met al sash put t y, non- ski nni ng compounds, nonr esi l i ent pr ef or med seal er s, or i mpr egnat ed pr ef or med gasket s. Mat er i al s exposed t o v i ew and unpai nt ed shal l be bl ack or neut r al col or .

2. 4. 1 El ast omer i c Seal ant

ASTM C920, Type S or M, Gr ade NS, Cl ass 12. 5, Use NT. Use f or channel or st op gl azi ng and met al sash. Seal ant shal l be chemi cal l y compat i bl e wi t h set t i ng bl ocks, edge bl ocks, and seal i ng t apes. Col or of seal ant shal l be as sel ect ed .

2. 4. 2 Seal i ng Tapes, Beads or Gasket s

Gasket s or beads shal l be at l east 3/ 8 i nch wi de wi t h a Shor e " A" dur omet er har dness of 50 and conf or m t o ASTM C509.

2. 4. 3 Set t i ng Bl ocks and Edge Bl ocks

Use neopr ene of 70 t o 90 Shor e " A" dur omet er har dness, chemi cal l y compat i bl e wi t h seal ant s used, and of s i zes r ecommended by t he gl ass manufacturer.

2. 4. 4 Accessories

Use accessor i es as r equi r ed t o pr ovi de a compl et e i nst al l at i on, i ncl udi ng gl azi ng poi nt s, c l i ps, shi ms, angl es, beads, and spacer st r i ps. Pr ovi de noncor r odi ng met al accessor i es. Pr ovi de pr i mer - seal er s and cl eaner s as r ecommended by t he gl ass and seal ant manuf act ur er s.

2. 5 WI NDOW ASSEMBLI ES

Wi ndow uni t s shal l conf or m t o AAMA/ WDMA/ CSA 101/ I . S. 2/ A440.

2. 5. 1 Pr ovi s i ons f or Gl azi ng

Pr ovi de wi ndows and r abbet s sui t abl e f or speci f i ed gl ass t hi ckness.

Pr ovi de sash f or gl azi ng and f or secur i ng gl ass wi t h met al beads, gl azi ng cl i ps, or gl azi ng channel s and gl azi ng compound.

2. 5. 2 Seal ant , Gasket s, and Beads

Seal ant , gasket s, and beads shal l be cont i nuous ar ound t he per i met er of t he gl ass.

2. 5. 3 Weatherstripping

Pr ovi de f or vent i l at i ng sect i ons of wi ndows t o ensur e a weat her t i ght seal meet i ng t he i nf i l t r at i on r equi r ement s speci f i ed i n AAMA/ WDMA/ CSA 101/ I . S. 2/ A440. Pr ovi de f act or y- appl i ed weat her st r i ppi ng t hat can be r epl aced by f i el d r epai r mechani cs. Use mol ded vi nyl , mol ded or mol ded- expanded neopr ene f or weat her st r i ppi ng f or compr essi on cont act sur f aces. Do not use neopr ene or pol yvi nyl chl or i de weat her st r i ppi ng wher e i t wi l l be exposed t o di r ect sunl i ght .

Apr i l 2019 Page 4 SECTI ON 08 56 53

2. 5. 4 Fasteners

Pr ovi de f l at head, cr oss- r ecessed t ype, exposed head scr ews and bol t s wi t h st andar d t hr eads f or use on wi ndows, t r i m, and accessor i es. Scr ew heads shal l f i ni sh f l ush wi t h adj oi ni ng sur f aces. Sel f - t appi ng sheet - met al scr ews ar e not accept abl e f or mat er i al mor e t han 1/ 16 i nch t hi ck.

2. 5. 5 Dr i ps and Weep Hol es

Pr ovi de cont i nuous dr i ps over heads of t op vent i l at or s. Wher e f i xed wi ndows adj oi n vent i l at or s, dr i ps shal l be cont i nuous acr oss t ops of f i xed wi ndows. Pr ovi de dr i ps and weep hol es as r equi r ed t o r et ur n wat er t o t he outside.

2. 5. 6 Combi nat i on Wi ndows

Wi ndows used i n combi nat i on shal l be t he same gr ade and per f or mance cl ass and shal l be f act or y assembl ed. Wher e f act or y assembl y of i ndi v i dual wi ndows i nt o l ar ger uni t s i s l i mi t ed by t r anspor t at i on consi der at i ons, pr ef abr i cat e, mat ch mar k, t r anspor t , and f i el d assembl e.

2. 5. 7 Accessories

Pr ovi de wi ndows compl et e wi t h necessar y har dwar e, f ast eni ngs, c l i ps, f i ns, anchor s, gl azi ng beads, and ot her appur t enances necessar y f or compl et e i nst al l at i on and pr oper oper at i on.

2. 5. 8 Hardware

The i t em, t ype, and f unct i onal char act er i st i cs shal l be t he manuf act ur er ' s st andar d f or t he par t i cul ar wi ndow t ype and shal l conf or m t o AAMA/ WDMA/ CSA 101/ I . S. 2/ A440. Pr ovi de har dwar e t hat f unct i ons af t er t he wi ndow assembl y has wi t hst ood t he appl i cat i on of t he desi gn bl ast pr essur e causi ng t he devel opment of a st at i c desi gn r esi st ance, r u, uni f or mal l y appl i ed over bot h gl azi ng and f r ame as def i ned i n par agr aph ent i t l ed " Cer t i f i cat es of Compl i ance" of t hi s sect i on. Equi p oper at i ng vent i l at or s wi t h a l ock or l at chi ng devi ce whi ch can be secur ed f r om t he i nsi de.

2. 5. 9 Anchors

Pr ovi de conceal ed anchor s of t he t ype r ecommended by t he wi ndow manuf act ur er f or t he speci f i c t ype of const r uct i on. Anchor s and f ast ener s shal l be compat i bl e wi t h t he wi ndow and t he adj oi ni ng const r uct i on.

Pr ovi de a mi ni mum of t hr ee anchor s f or each j amb l ocat ed appr oxi mat el y 6 i nches f r om each end and at mi dpoi nt .

2. 5. 10 Finishes

Exposed al umi num sur f aces shal l be f act or y f i ni shed wi t h an anodi c coat i ng or or gani c coat i ng. Col or shal l be as i ndi cat ed. Wi ndows f or each bui l di ng shal l have t he same f i ni sh.

2. 5. 10. 1 Anodi c Coat i ng

Cl ean exposed al umi num sur f aces and pr ovi de an anodi zed f i ni sh conf or mi ng to AA DAF45..

Apr i l 2019 Page 5 SECTI ON 08 56 53

2. 5. 10. 2 Or gani c Coat i ng

Cl ean and pr i me exposed al umi num sur f aces. Pr ovi de a baked enamel f i ni sh i n accor dance wi t h AAMA 2603 wi t h t ot al dr y f i l m t hi ckness not l ess t han

0. 8 mi l .

PART 3 EXECUTI ON

3. 1 INSTALLATION

3. 1. 1 Met hod of I nst al l at i on

I nst al l i n accor dance wi t h t he wi ndow manuf act ur er ' s pr i nt ed i nst r uct i ons and det ai l s. Set wi ndows at pr oper el evat i on, l ocat i on, and r eveal .

Br ace pr oper l y t o pr event di st or t i on and mi sal i gnment . Bed scr ews or bol t s i n s i l l member s, j oi nt s at mul l i ons, cont act s of wi ndows wi t h s i l l s , bui l t - i n f i ns, and subf r ames i n mast i c seal ant of a t ype r ecommended by t he wi ndow manuf act ur er . I nst al l wi ndows i n a manner t hat wi l l pr event ent r ance of wat er . Fast en har dwar e t o wi ndows.

3. 1. 2 Gl ass Set t i ng

I t ems t o be gl azed shal l be ei t her shop or f i el d gl azed usi ng gl ass of t he qual i t y and t hi ckness speci f i ed or i ndi cat ed. Pr epar at i on and gl azi ng, unl ess ot her wi se appr oved, shal l conf or m t o appl i cabl e r ecommendat i ons i n the GANA Gl azi ng Manual . Wi ndows may be gl azed i n conf or mance wi t h one of t he gl azi ng met hods descr i bed i n t he st andar ds under whi ch t hey ar e pr oduced, except t hat f ace put t y i ng wi t h no beddi ng wi l l not be per mi t t ed. Handl e and i nst al l gl azi ng mat er i al s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons. Use beads or st ops f ur ni shed wi t h i t ems t o be gl azed, t o secur e gl ass i n pl ace.

3. 1. 3 Di ssi mi l ar Mat er i al s

Wher e al umi num sur f aces ar e i n cont act wi t h, or f ast ened t o, masonr y, wood, or di ssi mi l ar met al s, except st ai nl ess st eel or z i nc, t he al umi num sur f ace shal l be pr ot ect ed f r om di ssi mi l ar mat er i al s as r ecommended i n t he Appendi x t o AAMA/ WDMA/ CSA 101/ I . S. 2/ A440. Do not coat sur f aces on whi ch seal ant s ar e t o adher e.

3. 1. 4 Anchor s and Fast eni ngs

Make pr ovi s i on f or secur i ng uni t s t o each ot her and t o adj oi ni ng construction.

3. 1. 5 Adj ust ment s Af t er I nst al l at i on

Af t er i nst al l at i on of wi ndows and compl et i on of gl azi ng and f i el d pai nt i ng, adj ust vent i l at or s and har dwar e t o oper at e smoot hl y and t o pr ovi de weat her t i ght seal i ng when vent i l at or s ar e c l osed and l ocked.

Lubr i cat e har dwar e and oper at i ng par t s as r ecommended by t he manuf act ur er .

3. 2 CLEANING

Cl ean i nt er i or and ext er i or sur f aces of wi ndow uni t s of mor t ar , pl ast er , pai nt spat t er i ng spot s, and ot her f or ei gn mat t er t o pr esent a neat appear ance, t o pr event f oul i ng of weat her i ng sur f aces and weat her st r i ppi ng, and t o pr event i nt er f er ence wi t h t he oper at i on of har dwar e. Remove st ai ned, di scol or ed, or abr aded wi ndows t hat cannot be

Apr i l 2019 Page 6 SECTI ON 08 56 53 r est or ed t o t hei r or i gi nal condi t i on, and r epl ace wi t h new wi ndows.

- - End of Sect i on - -

Apr i l 2019 Page 7 SECTI ON 08 56 53