08 34 01.pdf

Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 08 34 01

FORCED ENTRY RESI STANT COMPONENTS

04/17

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AI R MOVEMENT AND CONTROL ASSOCI ATI ON I NTERNATI ONAL ( AMCA)

AMCA 500- D ( 2012) Labor at or y Met hods of Test i ng Damper s f or Rat i ng

ALUMI NUM ASSOCI ATI ON ( AA)

AA DAF45 ( 2003; Reaf f i r med 2009) Desi gnat i on Syst em f or Al umi num Fi ni shes

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS D1. 1/ D1. 1M ( 2015; Er r at a 1 2015; Er r at a 2 2016) St r uct ur al Wel di ng Code - St eel

ASM I NTERNATI ONAL ( ASM)

ASM STFA ( 2001; 6t h Ed) The Sur f ace Tr eat ment and Fi ni shi ng of Al umi num and I t s Al l oys ( 2 Vol.)

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2013) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A653/ A653M ( 2015; E 2016) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM C1036 ( 2016) St andar d Speci f i cat i on f or Fl at Glass

ASTM C1048 ( 2012; E 2012) St andar d Speci f i cat i on f or Heat - Tr eat ed Fl at Gl ass - Ki nd HS, Ki nd FT Coat ed and Uncoat ed Gl ass

ASTM C1172 ( 2014) St andar d Speci f i cat i on f or Lami nat ed Ar chi t ect ur al Fl at Gl ass

ASTM D1003 ( 2013) Haze and Lumi nous Tr ansmi t t ance of Tr anspar ent Pl ast i cs

Apr i l 2019 Page 1 SECTI ON 08 34 01

ASTM D1044 ( 2013) Resi st ance of Tr anspar ent Pl ast i cs t o Sur f ace Abr asi on

ASTM D1922 ( 2015) Pr opagat i on Tear Resi st ance of Pl ast i c Fi l m and Thi n Sheet i ng by Pendul um Method

ASTM D256 ( 2010) Det er mi ni ng t he I zod Pendul um I mpact Resi st ance of Pl ast i cs

ASTM D3595 ( 2014) Pol ychl or ot r i f l uor oet hyl ene ( PCTFE) Ext r uded Pl ast i c Sheet and Fi l m

ASTM D3951 ( 2015) Commer ci al Packagi ng

ASTM D4093 ( 1995; R 2014) Phot oel ast i c Measur ement s of Bi r ef r i ngence and Resi dual St r ai ns i n Tr anspar ent or Tr ansl ucent Pl ast i c Materials

ASTM D4802 ( 2016) St andar d Speci f i cat i on f or Pol y( Met hyl Met hacr yl at e) Acr yl i c Pl ast i c Sheet

ASTM D542 ( 2014) I ndex of Ref r act i on of Tr anspar ent Or gani c Pl ast i cs

ASTM D5420 ( 2016) St andar d Test Met hod f or I mpact Resi st ance of Fl at , Ri gi d Pl ast i c Speci men by Means of a St r i ke I mpact ed by a Fal l i ng Wei ght ( Gar dner I mpact )

ASTM D570 ( 1998; E 2010; R 2010) St andar d Test Met hod f or Wat er Absor pt i on of Pl ast i cs

ASTM D635 ( 2014) St andar d Test Met hod f or Rat e of Bur ni ng and/ or Ext ent and Ti me of Bur ni ng of Sel f - Suppor t i ng Pl ast i cs i n a Hor i zont al Posi t i on

ASTM D638 ( 2014) St andar d Test Met hod f or Tensi l e Pr oper t i es of Pl ast i cs

ASTM D696 ( 2016) St andar d Test Met hod f or Coef f i c i ent of Li near Ther mal Expansi on of Pl ast i cs Bet ween - 30 degr ees C and 30 degr ees C Wi t h a Vi t r eous Si l i ca Dilatometer

ASTM D792 ( 2013) Densi t y and Speci f i c Gr avi t y ( Rel at i ve Densi t y) of Pl ast i cs by Displacement

ASTM D882 ( 2012) Tensi l e Pr oper t i es of Thi n Pl ast i c Sheeting

ASTM D905 ( 2008; E 2009) St r engt h Pr oper t i es of Adhesi ve Bonds i n Shear by Compr essi on

Apr i l 2019 Page 2 SECTI ON 08 34 01

Loading

ASTM E1300 ( 2016) St andar d Pr act i ce f or Det er mi ni ng Load Resi st ance of Gl ass i n Bui l di ngs

ASTM E169 ( 2016) St andar d Pr act i ces f or Gener al Techni ques of Ul t r avi ol et - Vi s i bl e Quant i t at i ve Anal ysi s

ASTM E831 ( 2014) Li near Ther mal Expansi on of Sol i d Mat er i al s by Ther momechani cal Anal ysi s

ASTM E90 ( 2009) St andar d Test Met hod f or Labor at or y Measur ement of Ai r bor ne Sound Tr ansmi ssi on Loss of Bui l di ng Par t i t i ons and El ement s

ASTM F1233 ( 2008; R 2013) Secur i t y Gl azi ng Mat er i al s and Syst ems

ASTM F428 ( 2009; R 2014) I nt ensi t y of Scr at ches on Aer ospace Gl ass Encl osur es

ASTM F520 ( 2016) St andar d Test Met hod f or Envi r onment al Resi st ance of Aer ospace Tr anspar enci es t o Ar t i f i c i al l y I nduced Exposures

ASTM F521 ( 2016) St andar d Test Met hods f or Bond I nt egr i t y of Tr anspar ent Lami nat es

ASTM F548 ( 2009; R 2014nt ensi t y of Scr at ches on Aer ospace Tr anspar ent Pl ast i cs

ASTM F735 ( 2011) Abr asi on Resi st ance of Tr anspar ent Pl ast i cs and Coat i ngs Usi ng t he Osci l l at i ng Sand Met hod

ASTM F791 ( 1996; R 2013) St r ess Cr azi ng of Tr anspar ent Pl ast i cs

ASTM G155 ( 2013) St andar d Pr act i ce f or Oper at i ng Xenon Ar c Li ght Appar at us f or Exposur e of Non- Met al l i c Mat er i al s

BUI LDERS HARDWARE MANUFACTURERS ASSOCI ATI ON ( BHMA)

ANSI / BHMA A156. 1 ( 2013) But t s and Hi nges

ANSI / BHMA A156. 115 ( 2016) Har dwar e Pr epar at i on i n St eel Door s and St eel Fr ames

ANSI / BHMA A156. 13 ( 2012) Mor t i se Locks & Lat ches Ser i es 1000

ANSI / BHMA A156. 16 ( 2013) Auxi l i ar y Har dwar e

ANSI / BHMA A156. 18 ( 2016) Mat er i al s and Fi ni shes

ANSI / BHMA A156. 4 ( 2013) Door Cont r ol s - Cl oser s

Apr i l 2019 Page 3 SECTI ON 08 34 01

ANSI / BHMA A156. 5 ( 2014) Cyl i nder and I nput Devi ces f or Locks

ANSI / BHMA A156. 8 ( 2015) Door Cont r ol s - Over head St ops and Holders

GLASS ASSOCI ATI ON OF NORTH AMERI CA ( GANA)

GANA Gl azi ng Manual ( 2009) Gl azi ng Manual

H. P. WHI TE LABORATORY ( HPW)

HPW TP- 0500. 03 ( 2003) Tr anspar ent Mat er i al s f or use i n For ced Ent r y or Cont ai nment Bar r i er s

NATI ONAL ASSOCI ATI ON OF ARCHI TECTURAL METAL MANUFACTURERS ( NAAMM)

NAAMM HMMA 801 ( 2012) Gl ossar y of Ter ms f or Hol l ow Met al Door s and Fr ames

NAAMM HMMA 802 ( 2007) Manuf act ur i ng of Hol l ow Met al Door s and Fr ames

NAAMM HMMA 810 ( 2009) Hol l ow Met al Door s

NAAMM HMMA 820 ( 2008) Hol l ow Met al Fr ames

NAAMM HMMA 830 ( 2002) Har dwar e Sel ect i on f or Hol l ow Met al Door s and Fr ames

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 80 ( 2016) St andar d f or Fi r e Door s and Ot her Openi ng Pr ot ect i ves

NFPA 80A ( 2017) Recommended Pr act i ce f or Pr ot ect i on of Bui l di ngs f r om Ext er i or Fi r e Exposur es

U. S. DEPARTMENT OF STATE ( SD)

SD St d- 01. 01 ( 1993 Rev G Amended; I nx Cer t i f i ed Pr od/ Mf g) Cer t i f i cat i on St andar d For ced Ent r y and Bal l i s t i c Resi st ance of St r uct ur al Syst ems

UNDERWRI TERS LABORATORI ES ( UL)

UL 10B ( 2008; Repr i nt Feb 2015) Fi r e Test s of Door Assembl i es

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

I nst al l at i on; G

Apr i l 2019 Page 4 SECTI ON 08 34 01

SD- 03 Pr oduct Dat a

For ced Ent r y Resi st ant Component s Installation Components

SD- 07 Cer t i f i cat es

For ced Ent r y Resi st ant Component s; G

1. 3 QUALI TY ASSURANCE

Qual i f y wel di ng pr ocedur es, wel der s, and wel di ng oper at or s i n accor dance with AWS D1. 1/ D1. 1M. For ced ent r y r esi st ant component s shal l be cer t i f i ed as r esi st ant t o one or mor e of t he f or ced ent r y t est st andar ds i ndi cat ed bel ow. For ced ent r y r esi st ant component s shal l be t est ed based on t he l evel of t hr eat ; t hr eat l evel s and t est i ng r equi r ement s wi l l be det er mi ned on a per pr oj ect basi s, and i ndi cat ed i n t he cont r act document s. The t est r esul t s and cer t i f i cat i on t her eof shal l be appr oved by t he Cont r act i ng Of f i cer bef or e del i ver y of t he component t o t he j ob s i t e.

Test St andar d Level Wi t hi n Test St andar d ( I f Any)

Mi ni mum At t ack Ti me ( Mi nut es)

ASTM F1233 Cl ass I V Variable

ASTM F1233 Cl ass V Variable

HPW TP- 0500. 03 Prolonged 180

HPW TP- 0500. 03 Level I I Variable

HPW TP- 0500. 03 Level I I I Variable

HPW TP- 0500. 03 Level I V Variable

HPW TP- 0500. 03 Level V Variable

SD St d- 01. 01 5 Mi nut e 5

SD St d- 01. 01 15 Mi nut e 15

SD St d- 01. 01 60 Mi nut e 60

1. 4 DELI VERY, STORAGE, AND HANDLI NG

Del i ver Component s t o t he j ob s i t e wi t h t he manuf act ur er ' s name, and model number c l ear l y mar ked t her eon. Component s shal l be del i ver ed, st or ed, and handl ed so as not t o be damaged or def or med and shal l be i n accor dance with ASTM D3951. Component s shal l be handl ed car ef ul l y t o pr event damage t o t he f aces, edges, cor ner s, ends, and gl azi ng wher e appl i cabl e.

Abr aded, scar r ed, or r ust y ar eas shal l be c l eaned, r epai r ed, or r epl aced i mmedi at el y upon det ect i on of t he damage. Repl ace damaged component s t hat cannot be r est or ed. Component s and equi pment shal l be st or ed i n a dr y l ocat i on on pl at f or ms or pal l et s t hat ar e vent i l at ed adequat el y, f r ee of dust , wat er , and ot her cont ami nant s, and st or ed i n a manner whi ch per mi t s easy access f or i nspect i on and handl i ng. Submi t l i s t s i ncl udi ng schedul e

Apr i l 2019 Page 5 SECTI ON 08 34 01 of component s t o be i ncor por at ed i n t he wor k wi t h manuf act ur er ' s model or cat al og number s, speci f i cat i on and dr awi ng r ef er ence number s, war r ant y i nf or mat i on, t hr eat l evel desi gnat ed, f i r e r at i ngs, sound t r ansmi ssi on coef f i c i ent r at i ngs, i nsul at i on " U" val ue, and number of i t ems pr ovi ded.

Li st i ng of s i mi l ar pr oduct s t hat have been sat i sf act or i l y i n use f or t wo year s or mor e, i ncl udi ng name of pur chaser s, l ocat i ons of i nst al l at i ons, dat es of i nst al l at i ons, and ser vi ce or gani zat i ons.

1. 5 SEQUENCI NG AND SCHEDULI NG

When t est i ng of a pr evi ousl y unt est ed component i s speci f i ed, al l ow suf f i c i ent l ead t i me so t hat t est i ng wi l l not del ay const r uct i on. The t est r esul t s and component shal l be appr oved by t he Cont r act i ng Of f i cer bef or e del i ver y of t he component t o t he j ob s i t e.

1. 6 WARRANTY

Manuf act ur er ' s war r ant y f or 5 year s shal l be f ur ni shed f or gl azi ng mat er i al s. War r ant y shal l pr ovi de f or r epl acement and i nst al l at i on of gl azi ng i f del ami nat i on, di scol or at i on, or cr acki ng or cr azi ng occur s.

PART 2 PRODUCTS

2. 1 SYSTEM DESCRI PTI ON

2. 1. 1 Gener al Requi r ement s

Component s cover ed i n t hi s speci f i cat i on ar e desi gned t o r esi st f or ced ent r y at t acks wi t h i ncr easi ng sever i t y l evel s of hand, power , and t her mal t ool s and weapons and expl osi ves. The component s may i ncl ude f or ced ent r y r esi st ant per sonnel door / f r ame assembl i es l ouver s wi ndows gl azi ng f or door s and pass- t hr ough dr awer s. Each t ype of f or ced ent r y r esi st ant component shal l be a compl et e assembl y pr oduced by a s i ngl e manuf act ur er . Movabl e and oper abl e component s shal l oper at e smoot hl y and f r eel y. I t ems f or ext er i or i nst al l at i on shal l be desi gned t o r esi st wat er and vapor penet r at i on or ent r apment . Submi t manuf act ur er ' s descr i pt i ve dat a, i nst al l at i on i nst r uct i ons, and cer t i f i cat e and t est r epor t showi ng compl i ance wi t h t he speci f i ed f or ced ent r y t est st andar d as speci f i ed i n par agr aph COMPONENT TEST REQUI REMENTS f or al l component s. Fol l owi ng appr oval of manuf act ur er ' s descr i pt i ve dat a, submi t a schedul e l i s t i ng t he i t ems and component s t o be f ur ni shed. Manuf act ur er ' s cer t i f i cat e shal l be submi t t ed i ndi cat i ng t hat compl i ance wi t h t he i nst al l at i on i nst r uct i ons and dr awi ngs wi l l pr ovi de t he speci f i ed degr ee of f or ced ent r y r esi st ance.

2. 1. 2 Ot her Submi t t al Requi r ement s

The f ol l owi ng shal l be submi t t ed:

a. Manuf act ur er ' s descr i pt i ve dat a and f i ni sh sampl es.

b. The f or ced ent r y r esi st ant door l ock f unct i ons, f or sel ect i on by t he Cont r act i ng Of f i cer .

c. Ai r f l ow cal cul at i ons f or l ouver s.

d. Manuf act ur er ' s cer t i f i cat es at t est i ng t hat component s conf or m t o t he r equi r ement s on dr awi ngs and i n speci f i cat i ons.

e. Test i ng r epor t s f r om i ndependent t est i ng l abor at or i es i ndi cat i ng

Apr i l 2019 Page 6 SECTI ON 08 34 01 conf or mance t o r egul at or y r equi r ement s.

f . Cer t i f i cat e, i n l i eu of a l abel , f or f i r e r at ed door s.

g. Cer t i f i cat e i ndi cat i ng compl i ance wi t h t he r equi r ement s f or door s of t he t ype and f i r e r at i ng c l ass.

h. Manuf act ur er cer t i f i cat i on t hat compl i ance wi t h t he i nst al l at i on i nst r uct i ons and/ or dr awi ngs wi l l pr ovi de t he speci f i ed degr ee of f or ced ent r y r esi st ance.

2. 2 COMPONENTS

Each t ype of f or ced ent r y r esi st ant component shal l be t he st andar d pr oduct of a manuf act ur er r egul ar l y engaged i n t he manuf act ur e of such pr oduct s and shal l dupl i cat e i t ems t hat have been t est ed and appr oved i n accor dance wi t h t he f or ced ent r y t est st andar d speci f i ed i n par agr aph

COMPONENT TEST REQUI REMENTS.

2. 3 FORCED ENTRY RESI STANT PERSONNEL DOOR AND FRAME ASSEMBLI ES

Door s and f r ames shal l be f act or y f abr i cat ed assembl i es of i ndi cat ed si zes. Door s shal l be of st eel , har dened st eel , or be r ei nf or ced i nt er nal l y wi t h st eel shapes and cl ad wi t h al umi num. I nt er i or composi t i on and r ei nf or cement shal l be det er mi ned by t he manuf act ur er . Rubber s i l encer s shal l be i nst al l ed on door f r ames. Ext er i or door s shal l have t op edges cl osed f l ush and seal ed agai nst wat er penet r at i on, be i nsul at ed, and pr ovi ded wi t h weat her st r i ppi ng and t hr eshol ds. Locks and hi nges shal l be t he same or equal i n per f or mance and number as t he har dwar e used on t he t est ed door . Lock and har dwar e shal l be pr ovi ded by t he manuf act ur er as a compl et e assembl y. Fr ames shal l be f ur ni shed by t he door f abr i cat or , wi t h anchor age t o wal l const r uct i on compl et el y speci f i ed as t o number of anchor s, anchor s i ze, mat er i al , and l engt h.

2. 3. 1 Fi r e Rat ed Door s

Pr ovi de f i r e r at ed door s at l ocat i ons i ndi cat ed. Door assembl i es shal l compl y wi t h t he f or ced ent r y t est st andar d speci f i ed and shal l bear t he l i s t i ng i dent i f i cat i on l abel of t he Under wr i t er s ' Labor at or i es, I nc. or a nat i onal l y r ecogni zed t est i ng l abor at or y t hat i s qual i f i ed t o per f or m t est s of f i r e door assembl i es i n accor dance wi t h UL 10B, and t hat has a l i s t i ng ser vi ce f or t he t est ed assembl i es. Door assembl i es i ncl ude door , har dwar e, f r ame, c l oser s, and gl azi ng. A cer t i f i cat e i ndi cat i ng t hat t he uni t s wer e i nspect ed i n accor dance wi t h NFPA 80 and NFPA 80Amay be f ur ni shed i n l i eu of l abel . For over si zed door s, a cer t i f i cat e f r om Under wr i t er s ' Labor at or i es, I nc. or a nat i onal l y r ecogni zed t est i ng l abor at or y may be f ur ni shed i n l i eu of l abel . The cer t i f i cat e shal l st at e t hat over si zed door s ar e manuf act ur ed i n compl i ance wi t h t he r equi r ement s f or door s of t he t ype and f i r e r at i ng c l ass. Manuf act ur er ' s descr i pt i ve dat a shal l be submi t t ed.

2. 3. 2 Sound Rat ed Door s

Pr ovi de sound r at ed door s at l ocat i ons i ndi cat ed. Door assembl i es shal l compl y wi t h t he f or ced ent r y t est st andar d speci f i ed and shal l consi st of door , har dwar e, f r ame, t hr eshol d, and adj ust abl e gasket s. The assembl y shal l have a l abor at or y Sound Tr ansmi ssi on Cl ass ( STC) r at i ng as i ndi cat ed when t est ed i n accor dance wi t h ASTM E90. Submi t manuf act ur er ' s descr i pt i ve dat a, t est r epor t , and cer t i f i cat i on of t he t est r epor t

Apr i l 2019 Page 7 SECTI ON 08 34 01 showi ng compl i ance wi t h t he speci f i ed r equi r ement s.

2. 3. 3 Door and Fr ame Fabr i cat i on

The subsur f aces shal l be f l at , par al l el , and pl umb af t er f abr i cat i on.

Door s shal l be r ei nf or ced i n accor dance wi t h manuf act ur er ' s desi gn. Door f r ames shal l be anchor ed as speci f i ed by t he door manuf act ur er .

Coor di nat e t he door manuf act ur er ' s r equi r ement s f or wel di ng t o wal l r ei nf or cement or cast i ng f r ame embedment s i nt o wal l bef or e wal l i s pl aced. St eel door f r ames shal l be mi t er ed or coped and wel ded at t he cor ner s wi t h wel ds gr ound smoot h. Wher e st r uct ur al channel f r ames ar e used t he si ze, wei ght , st ops, wel di ng, and anchor age i nt o sur r oundi ng const r uct i on shal l be speci f i ed and t est ed al ong wi t h t he door as an assembl y. Any necessar y r ei nf or cement s i n t he door and t he f r ame shal l be made i n t he f act or y. Door and f r ame shal l be dr i l l ed and t apped as r equi r ed f or t he speci f i ed har dwar e. Fr ame channel s shal l be mi t er ed or coped and wel ded at cor ner s wi t h f ul l penet r at i on gr oove wel ds. Exposed wel ds shal l be dr essed smoot h. Hol l ow met al door s and f r ames shal l be manuf act ur ed i n accor dance wi t h NAAMM HMMA 801, NAAMM HMMA 802, NAAMM HMMA 810, and NAAMM HMMA 820 as a st andar d of qual i t y, and shal l meet t he speci f i ed f or ced ent r y t est i ng st andar d.

2. 3. 4 Si del i ght Fr ames and Door Gl azi ng

Const r uct s i del i ght f r ames usi ng f or ced ent r y r esi st ant door f r ame sect i ons. For gl azi ng i n door or s i del i ght , st op hei ght and r abbet dept h shal l be as r equi r ed t o accommodat e t he gl azi ng mat er i al t hat i s r esi st ant t o t he f or ced ent r y t est st andar d speci f i ed. The assembl y shal l be t est ed wi t h t he speci f i ed gl azi ng and st ops i nst al l ed. Ext er i or ( at t ack s i de) gl azi ng st ops shal l be wel ded or i nt egr al t o t he f r ame. I nt er i or ( pr ot ect ed si de) gl azi ng st ops shal l be r emovabl e st ops at t ached wi t h hi gh- st r engt h al l oy st eel machi ne scr ews wi t h t amper - r esi st ant heads or as r equi r ed by t he manuf act ur er . Gl azi ng i s speci f i ed i n par agr aph For ced Ent r y Resi st ant Gl azi ng Mat er i al s.

2. 3. 5 Pr epar at i on f or Har dwar e

Pr epar e door s and f r ames f or har dwar e i n accor dance wi t h manuf act ur er ' s i nst r uct i ons. Sur f ace appl i ed har dwar e shal l be dr i l l ed and t apped i n t he field.

2. 3. 6 Hardware

Har dwar e f or f or ced ent r y r esi st ant door assembl i es shal l be pr ovi ded by t he door assembl y manuf act ur er t o ensur e a compl et e f or ced ent r y r esi st ant assembl y. Wher e t est st andar d r equi r es har dwar e t o be t est ed wi t h t he door assembl y, l ocks and hi nges shal l be i ncl uded i n t he l abel i ng and/ or t est cer t i f i cat i on. Locks and hi nges shal l be t he same or equal i n per f or mance, qual i t y, gr ade, and quant i t y as used on t he successf ul l y t est ed door assembl y i n accor dance wi t h t he speci f i ed f or ced ent r y t est i ng st andar d. Pr ovi de cer t i f i cat i on t hat t he l ocks, l at ches, and hi nges pr ovi de t he same degr ee of f or ced ent r y r esi st ance as r equi r ed by t he speci f i ed f or ced ent r y t est i ng st andar d. Keyi ng shal l be as speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE.

2. 3. 6. 1 Locks and Lat chset s

The door manuf act ur er shal l submi t avai l abl e l ock f unct i ons f or sel ect i on of f unct i on by t he Cont r act i ng Of f i cer . Mor t i se l ock and l at chset s shal l

Apr i l 2019 Page 8 SECTI ON 08 34 01 be, as a mi ni mum, ser i es 1000, oper at i onal Gr ade 1, Secur i t y Gr ade 1 or 1A, and shal l conf or m t o ANSI / BHMA A156. 13. St r i kes f or mor t i se l ocks and l at ches ( i ncl udi ng deadbol t l ocks) , as a mi ni mum, shal l conf or m t o ANSI / BHMA A156. 115 except st r i kes shal l be r ect angul ar ( wi t hout cur ved l i p) . Mor t i se- t ype l ocks and l at ches f or door s 1- 3/ 4 i nches t hi ck and over shal l have adj ust abl e bevel f r ont s or ot her wi se conf or m t o t he shape of t he door . Mor t i se l ocks shal l have ar mor ed f r ont s. Mor t i se l ocks and l at ches shal l have f ul l escut cheon, t hr ough- bol t ed, ext r uded st ai nl ess st eel t r i m. Lock f i ni sh shal l be 630i n accor dance wi t h ANSI / BHMA A156. 18.

2. 3. 6. 2 Hinges

St eel door s and f r ames r equi r ed t o r esi st t he " ver y l ow" or " l ow" t hr eat sever i t y l evel t hat ar e up t o and i ncl udi ng 7 f eet 0 i nches hi gh shal l , as a mi ni mum, be equi pped wi t h t hr ee Gr ade 1 hi nges i n accor dance wi t h ANSI / BHMA A156. 1, mi ni mum si ze 5 i nches hi gh, heavy, doubl e, or t r i pl e wei ght as r equi r ed f or wei ght of door . For each addi t i onal 12 i nches of door hei ght beyond 7 f eet 0 i nches, pr ovi de a mi ni mum of one mor e hi nge.

Hi nges shal l be f ul l mor t i se, hal f mor t i se, f ul l sur f ace, or hal f sur f ace desi gn as r ecommended by t he manuf act ur er f or f r ame and door desi gn and shal l be t amper pr oof unl ess mount ed on t he pr ot ect ed si de of t he door .

Hi nges shal l have nonr emovabl e pi nsand be equi pped wi t h a saf et y st ud.

Spot wel di ng of hi nge pi n wi l l not be accept abl e. Pr ovi de hi nge manuf act ur er ' s cer t i f i cat i on t hat t he hi nge suppl i ed meet s appl i cabl e t est r equi r ement s f or ANSI / BHMA A156. 1 t ype number of hi nge speci f i ed and t hat t he hi nge i s sui t abl e f or t he s i ze and wei ght of t he door assembl y on whi ch i t wi l l be ut i l i zed. Cont i nuous ext r a heavy- dut y pi ano- t ype hi nge si zed t o car r y t he wei ght of t he door wi t hout saggi ng i s per mi t t ed. I f cont i nuous pi ano- t ype hi nges ar e pr ovi ded wi t h t he door , i ndependent l abor at or y r epor t s cover i ng bot h t he door wei ght capaci t y and a 2, 500, 000 cycl e t est i ng t o mat ch t he ANSI / BHMA A156. 1 Gr ade 1 r equi r ement s shal l be f ur ni shed by t he Cont r act or . I nt er i or door hi nges shal l be f ur ni shed i n pr i me coat ed st eel . Ext er i or door hi nges shal l be f ur ni shed i n nonf er r ous met al or st ai nl ess st eel .

2. 3. 6. 3 El ect r i c St r i kes

Wher e r equi r ed, pr ovi de el ect r i c st r i kes conf or mi ng t o ANSI / BHMA A156. 5 Gr ade 1. Fur ni sh st r i ke boxes wi t h deadbol t and l at ch st r i kes f or Gr ade

1. St r i kes shal l be f ai l secur e.

2. 3. 6. 4 Door Cl oser s

Cl oser s shal l be ext r a heavy dut y of s i ze and t ype r ecommended by t he manuf act ur er and shal l be Gr ade 1 conf or mi ng t o ANSI / BHMA A156. 4. Door c l oser f i ni sh shal l be 689 i n accor dance wi t h ANSI / BHMA A156. 18.

2. 3. 6. 5 Door St ops

Door st ops shal l be ext r a heavy dut y, conf or mi ng t o ANSI / BHMA A156. 8, Type C08511 f or over head sur f ace mount ed t ype, ANSI / BHMA A156. 16, Type L11251 f or f l oor mount ed i nst al l at i onor ANSI / BHMA A156. 16, Type L11271 f or wal l mount ed i nst al l at i on.

2. 3. 7 Fr ame Anchor s

Pr ovi de j amb and head anchor s wi t h door / f r ame assembl y as speci f i ed by t he manuf act ur er and f or ced ent r y r esi st ant t o t he same degr ee as t he component . Coor di nat e concr et e wor k wi t h component manuf act ur er s when t he

Apr i l 2019 Page 9 SECTI ON 08 34 01 manuf act ur er speci f i es f r ame anchor s t o be embedded i nt o a concr et e or concr et e masonr y uni t sur f ace dur i ng const r uct i on.

2. 3. 8 Weatherstripping

Pr ovi de head and j ambs of ext er i or door s wi t h compr essi on- t ype neopr ene bul b or c l osed- cel l neopr ene adj ust abl e t ype weat her st r i ppi ng. Door st ops shal l be weat her st r i pped wi t h a sur f ace- mount ed sponge neopr ene st r i p i n br onze housi ng not l ess t han 0. 070 i nch t hi ck i nst al l ed t o make cont act wi t h t he door . I nst al l weat her st r i ppi ng i n conf or mance wi t h t he manuf act ur er ' s di r ect i ons af t er compl et i on of f i ni sh pai nt i ng.

2. 3. 9 Louver s f or Door s

Wher e i ndi cat ed, pr ovi de door s wi t h f ul l l ouver s or l ouver sect i on.

Louver s shal l be s i ght pr oof t ype i nser t ed i nt o t he door . Pi er ced l ouver s shal l not be used. I nser t ed l ouver s shal l be st at i onar y and shal l be nonr emovabl e f r om t he at t ack s i de of f or ced ent r y r esi st ant door s. The f r ee ar ea of t he t ot al squar e f eet of t he l ouver shal l be 39 per cent f or chevr on st y l e l ouver s . Louver s shal l be i n accor dance wi t h AMCA 500- D ai r f l ow t est ; mi ni mum ai r f l ow shal l be 35 per cent f or chevr on st y l e.

Submi t ai r f l ow cal cul at i ons and t est dat a showi ng compl i ance.

2. 4 FORCED ENTRY RESI STANT LOUVERS

Fabr i cat e l ouver s and f r ames f r om st eel shapes t o t he openi ng di mensi ons i ndi cat ed. The f r ee ar ea of t he t ot al squar e f eet of t he l ouver shal l be 39 per cent f or chevr on st y l e l ouver s . Louver submi t t ed shal l have been t est ed i n accor dance wi t h AMCA 500- D ai r f l ow t est ; mi ni mum ai r f l ow shal l be 35 per cent f or chevr on st y l e. Submi t ai r f l ow cal cul at i ons and t est dat a showi ng compl i ance.

2. 5 FORCED ENTRY RESI STANT WI NDOW ASSEMBLI ES

For ced ent r y r esi st ant wi ndow assembl i es shal l be const r uct ed usi ng f or ced ent r y r esi st ant f r ame sect i ons. Fr ames shal l be wel ded uni t s of s i zes and shapes i ndi cat ed wi t h mi ni mum f r ame f ace di mensi ons of 2 i nches. Fr ame anchor age shal l be as speci f i ed by t he manuf act ur er and f or ced ent r y r esi st ant t o t he same degr ee as t he component . Top hei ght and r abbet dept h shal l be as r equi r ed t o accommodat e t he gl azi ng mat er i al r esi st ant t o t he f or ced ent r y t est st andar d speci f i ed. Ext er i or ( at t ack s i de) gl azi ng st ops shal l be wel ded t o or i nt egr al t o t he f r ame. I nt er i or ( pr ot ect ed si de) gl azi ng st ops shal l be r emovabl e st ops at t ached wi t h hi gh- st r engt h al l oy st eel machi ne scr ews wi t h t amper - r esi st ant heads, or as r equi r ed by t he manuf act ur er .

2. 5. 1 Deal Tr ays

Deal t r ay shal l pr ovi de nomi nal 12- 3/ 4 i nch wi de by 1- 5/ 8 i nch hi gh openi ng i n s i l l of wi ndow f r ame and shal l i ncl ude a 6- 1/ 2 i nch st eel wr i t i ng l edge on ext er i or s i de of wi ndow. Deal t r ay shal l be of t he same mat er i al s and f i ni sh, shal l be a wel ded subassembl y of t he wi ndow assembl y, and shal l conf or m t o speci f i ed f or ced ent r y r equi r ement s f or t he ent i r e wi ndow assembl y.

2. 5. 2 Speaki ng Aper t ur es

Fabr i cat e speaki ng aper t ur es t o al l ow passage of voi ce at nor mal speaki ng vol ume wi t hout di st or t i on, and t o r esi st t he r ef er enced f or ced ent r y

Apr i l 2019 Page 10 SECTI ON 08 34 01 r esi st ant st andar d f or i ndoor use. Speaki ng aper t ur e shal l be a wel ded subassembl y of t he wi ndow assembl y and shal l conf or m t o t he speci f i ed r equi r ement s f or t he ent i r e wi ndow assembl y.

2. 5. 3 For ced Ent r y Resi st ant Gl azi ng Mat er i al

Gl azi ng mat er i al shal l be gl ass, pl ast i c, or composi t e and shal l conf or m t o appl i cabl e r equi r ement s ASTM C1036, ASTM E1300, and ASTM C1048.

Gl azi ng mat er i al s shal l be t est ed i n accor dance wi t h t he appl i cabl e sect i ons of t he f ol l owi ng t est pr ocedur es: ASTM D905, ASTM D1003, ASTM F428, ASTM F548, ASTM D4093, and ASTM F520. Pl ast i c gl azi ng shal l be acr yl i c pl ast i c sheet s, pol ycar bonat e pl ast i c sheet s, or appr oved equal .

Pl ast i c gl azi ng shal l be smoot h and cl ear on bot h s i des. Gl azi ng mat er i al shal l be f act or y i nst al l ed. Fact or y- gl azed component s shal l be cover ed t o pr ot ect t hem f r om damage dur i ng adj acent f i ni sh wor k.

2. 5. 3. 1 Lami nat ed Gl ass

Lami nat ed gl ass shal l be al l gl ass l ami nat ed const r uct i on conf or mi ng t o appl i cabl e sect i ons of ASTM C1172. The adhesi ve i nt er l ayer mat er i al f or bondi ng gl ass t o gl ass shal l be chemi cal l y compat i bl e wi t h sur f aces whi ch ar e t o be bonded. Mat er i al s sel ect ed f or l ami nat i on pur poses shal l be t est ed i n accor dance wi t h t he f ol l owi ng t est i ng pr ocedur es: ASTM D905, ASTM D1044, ASTM F735, ASTM D4093, ASTM F521, ASTM F520, and ASTM D1003.

Gl ass pl i es used i n t he l ami nat i on shal l be anneal ed f l oat gl ass conf or mi ng t o Type I , qual i t y q3, Cl ass 1, ASTM C1036 or heat - st r engt hened or f ul l y heat - t emper ed f l oat gl ass, Condi t i on A, Type I , qual i t y q3, Cl ass

1, ASTM C1048.

2. 5. 3. 2 Acr yl i c Pl ast i c Sheet s

Acr yl i c pl ast i c gl azi ng sheet s shal l be f or use " as cast " and i n st r et chi ng oper at i ons wi t h i mpr oved moi st ur e absor pt i on r esi st ance conf or mi ng t o ASTM D4802. Acr yl i c mat er i al s shal l be t est ed i n accor dance wi t h t he appl i cabl e sect i ons of t he f ol l owi ng t est i ng pr ocedur es:

ASTM D256, ASTM D5420, ASTM D542, ASTM D570, ASTM D635, ASTM D638,

ASTM D696, ASTM D792, ASTM D1003, ASTM E831, ASTM F791, and ASTM G155.

2. 5. 3. 3 Pol ycar bonat e Pl ast i c Sheet s

Pol ycar bonat e pl ast i c sheet shal l be l ami nat ed or sol i d, ul t r avi ol et st abi l i zed f l ame r esi st ant hi gh abr asi on r esi st ant sheet s shal l conf or m t o ASTM D3595. Pol ycar bonat e mat er i al s shal l be t est ed i n accor dance wi t h t he appl i cabl e sect i ons of t he f ol l owi ng t est i ng pr ocedur es: ASTM D256, ASTM D5420, ASTM D792, ASTM F735, ASTM D1003, ASTM D635, ASTM D638, ASTM D1044, ASTM D882, ASTM D1922, ASTM D570, ASTM F520, ASTM E169, ASTM G155, and ASTM F791. Pol yvi nyl but yr al shal l not be used i n cont act wi t h pol ycar bonat e because i t s pl act i c i zer may cr aze pol ycar bonat e.

2. 5. 3. 4 Gl ass/ Pl ast i c Lami nat e Gl azi ng

Gl ass/ pl ast i c l ami nat ed gl azi ng mat er i al s shal l be gl ass/ pl ast i c l ami nat ed const r uct i on or gl ass- cl ad pl ast i c " sandwi ch" const r uct i on conf or mi ng t o appl i cabl e sect i ons of ASTM C1172.

2. 5. 3. 5 Gl ass/ Pl ast i c Ai r - Gap Gl azi ng

For ced ent r y r esi st ant gl ass/ pl ast i c ai r - gap gl azi ng shal l consi st of an assembl y i n whi ch gl ass f or ms t he ext er i or and i nt er i or ( pr ot ect ed si de)

Apr i l 2019 Page 11 SECTI ON 08 34 01 l ayer , separ at ed by an ai r space f r om t he l ami nat ed pl ast i c pl i es. Gl ass pl i es shal l be anneal ed f l oat gl ass conf or mi ng t o Type I , qual i t y q3, Cl ass 1, ASTM C1036 or heat - st r engt hened or f ul l y heat - t emper ed f l oat gl ass, Condi t i on A, Type I , qual i t y q3, Cl ass 1, ASTM C1048. Pl ast i c pl i es shal l consi st of l ami nat ed ul t r avi ol et st abi l i zed pol ycar bonat e sheet s, conf or mi ng t o par agr aph Pol ycar bonat e Pl ast i c Sheet s and/ or acr yl i c sheet s f or use " as cast " and i n st r et chi ng oper at i ons wi t h i mpr oved moi st ur e absor pt i on r esi st ance conf or mi ng t o par agr aph Acr yl i c Pl ast i c Sheet s.

2. 5. 4 Adhesi ve I nt er l ayer Mat er i al s

Adhesi ve i nt er l ayer mat er i al f or bondi ng l ami nat es ( gl ass- gl ass, gl ass- pl ast i c, or pl ast i c- pl ast i c bonds) shal l be chemi cal l y compat i bl e wi t h t he sur f aces bonded. I nt er l ayer mat er i al s may be pol yvi nyl but yr al , cast - i n- pl ace ur et hane, pr opr i et ar y mat er i al s, sheet f r om ur et hane and ot her mat er i al s. Pol yvi nyl but yr al shal l not be used t o bond pol ycar bonat e. Adhesi ves shal l conf or m t o ASTM D905 and t he manuf act ur er ' s r ecommendat i ons.

2. 5. 5 Sealants

Seal ant s f or gl azi ngs shal l be chemi cal l y compat i bl e wi t h t he gl azi ng mat er i al s t hey ar e i n cont act wi t h and shal l have no del et er i ous ef f ect s t o t he gl azi ng mat er i al s or t o t he adhesi ves used i n gl azi ng l ami nat es.

Seal ant s shal l conf or m t o t he gl azi ng manuf act ur er ' s r ecommendat i ons and t he r equi r ement s of GANA Gl azi ng Manual .

2. 6 FORCED ENTRY RESI STANT PASS- THROUGH DRAWER

Fabr i cat e pass- t hr ough dr awer of st eel and of t he s i ze i ndi cat ed.

Assembl y shal l pr ovi de a weat her r esi st ant openi ng. At t achment t o wal l assembl y shal l be i n accor dance wi t h t he manuf act ur er ' s r ecommendat i ons.

Fi ni sh shal l be sat i n st ai nl ess st eel .

2. 7 ACCESSORIES

Pr ovi de accessor i es f or t he i nst al l at i on of component s i nt o t he sur r oundi ng st r uct ur e. Anchor age shal l be f or ced ent r y r esi st ant t o t he same degr ee as t he component . I nst al l at i on shal l be i n accor dance wi t h t he manuf act ur er ' s r ecommended i nst r uct i ons. Mat er i al s, par t s, bol t s, anchor s, suppor t s, br aces, f ast ener s, and connect i ons necessar y f or compl et i on of t he wor k.

2. 8 LABELING

For ced ent r y r esi st ant component s shal l be pl ai nl y and per manent l y l abel ed as t o t he appl i cabl e f or ced ent r y t est st andar d and l evel wi t hi n t he t est st andar d under whi ch t he component was t est ed and appr oved. Label shal l be v i s i bl e onl y f r om t he pr ot ect ed si de af t er component i nst al l at i on and shal l i ncl ude t he f ol l owi ng i nf or mat i on: ( 1) manuf act ur er ' s name or i dent i f y i ng symbol ; ( 2) model number , cont r ol number , or equi val ent ; ( 3) dat e of manuf act ur e wi t h t he week, mont h or quar t er , and year ( t hi s may be abbr evi at ed or be i n a t r aceabl e code such as t he l ot number ) ; ( 4) cor r ect mount i ng posi t i on ( by r emovabl e l abel ) ; and ( 5) f or ced ent r y r esi st ant r at i ng by i ndi cat i ng t he t est st andar d, l evel wi t hi n t he t est st andar d ( i f any) , and mi nut es of at t ack t i me wi t hst ood ( i f var i abl e i n t he st andar d) .

Apr i l 2019 Page 12 SECTI ON 08 34 01

2. 9 SHOP/ FACTORY FI NI SHI NG

Unl ess ot her wi se speci f i ed, al l f act or y or manuf act ur ed component s shal l be shop f i ni shed as i ndi cat ed bel ow.

2. 9. 1 Fer r ous Met al

Sur f aces of f er r ous met al , except gal vani zed and st ai nl ess st eel sur f aces, shal l be c l eaned and f act or y pr i med f or pai nt i ng. Fi ni sh pai nt i ng shal l be i n accor dance wi t h Sect i on 09 90 00 PAI NTS AND COATI NGS. Pr i or t o shop pai nt i ng, c l ean sur f aces wi t h sol vent s t o r emove gr ease and oi l and wi t h power wi r e- br ushi ng or sandbl ast i ng t o r emove l oose r ust , l oose mi l l scal e, and ot her f or ei gn subst ances. Sur f aces of i t ems t o be embedded i n concr et e shal l not be shop pai nt ed.

2. 9. 2 Galvanizing

I t ems speci f i ed t o be gal vani zed shal l be hot - di p pr ocessed af t er f abr i cat i on. Gal vani z i ng shal l be i n accor dance wi t h ASTM A123/ A123M or

ASTM A653/ A653M.

2. 9. 3 Aluminum

Unl ess ot her wi se speci f i ed, al umi num i t ems shal l be st andar d mi l l f i ni sh.

When anodi c coat i ngs ar e speci f i ed, coat i ngs shal l conf or m t o ASM STFA, wi t h t r eat ment t o a coat i ng t hi ckness not l ess t han t hat speci f i ed f or pr ot ect i ve and decor at i ve t ype f i ni sh i n AA DAF45. I t ems t o be anodi zed shal l r ecei ve a pol i shed sat i n f i ni sh pr et r eat ment and a c l ear l acquer over coat conf or mi ng t o t he above- r ef er enced st andar d.

PART 3 EXECUTI ON

3. 1 EXAMINATION

Fi el d ver i f y di mensi ons of r ough openi ngs f or component s and t hat sur f aces of openi ngs ar e l evel , pl umb, and pr ovi de r equi r ed cl ear ances. Component s shal l be exami ned f or r acki ng, t wi st i ng, and ot her mal f or mat i on and cor r ect ed pr i or t o i nst al l at i on. Repl ace damaged component s t hat cannot be cor r ect ed. Pr ot ect sur r oundi ng wor k pr i or t o i nst al l at i on of f or ced ent r y r esi st ant component s. Sur r oundi ng wor k, whi ch i s damaged as a r esul t of t he i nst al l at i on of f or ced ent r y r esi st ant component s, shal l be r epai r ed i n an appr oved manner pr i or t o accept ance. Pr ot ect gl azed uni t s f r om damage dur i ng adj acent wor k.

3. 2 FABRICATION

Component s shal l be const r uct ed, assembl ed, wel ded, and equi pped wi t h al l har dwar e and accessor i es r equi r ed t o compl et e t he assembl y i n t he shop of a compet ent f abr i cat or .

3. 3 FASTENERS

Fast ener s exposed t o v i ew shal l mat ch i n col or and f i ni sh and shal l har moni ze wi t h t he mat er i al t o whi ch f ast ener s ar e appl i ed. Hol es f or bol t s and scr ews shal l be dr i l l ed or neat l y punched. Poor mat chi ng of hol es shal l be cause f or r ej ect i on of t he wor k. Fast ener s shal l be conceal ed wher e pr act i cabl e. Unl ess ot her wi se speci f i ed, f ast ener s shal l conf or m t o Sect i on 05 50 13 MI SCELLANEOUS METAL FABRI CATI ONS.

Apr i l 2019 Page 13 SECTI ON 08 34 01

3. 4 CORROSI ON PROTECTI ON - DI SSI MI LAR MATERI ALS

Cont act sur f aces bet ween di ssi mi l ar met al s and al umi num sur f aces i n cont act wi t h concr et e, masonr y, pr essur e- t r eat ed wood, or absor pt i ve mat er i al s subj ect t o wet t i ng shal l be gi ven a pr ot ect i ve coat i ng i n accor dance wi t h Sect i on 09 90 00 PAI NTS AND COATI NGS.

3. 5 INSTALLATION

The f i ni shed wor k shal l be f r ee f r om def ect s. I nst al l component s pl umb and l evel and secur e r i gi dl y i n pl ace. I nst al l component s i n accor dance wi t h appr oved manuf act ur er ' s r ecommended i nst r uct i ons. Test oper abl e par t s of component s f or smoot h oper at i on i n t he pr esence of t he Cont r act i ng Of f i cer . Coor di nat e f r ame embedment s i nt o t he const r uct i on wher e r equi r ed by t he component manuf act ur er . Repl ace or r epai r mat er i al s whi ch i ncur damage as a r esul t of adj acent f i ni sh wor k as speci f i ed above. Wi ndow assembl i es, whi ch ar e not speci f i ed as f act or y gl azed, shal l have gl azi ng i nst al l ed i n accor dance wi t h GANA Gl azi ng Manual and t he manuf act ur er ' s r ecommended i nst r uct i ons. Fi el d gl azi ng shal l occur onl y af t er concr et e, masonr y, cei l i ng, el ect r i cal , mechani cal , pl umbi ng and adj acent f i ni sh wor k has been compl et ed. Pr oper l y i nst al l f or ced ent r y r esi st ant door assembl i es so t hat oper at i ng c l ear ances and bear i ng sur f aces conf or m t o t he manuf act ur er ' s i nst r uct i ons. Secur e t he bot t om of door f r ames t o t he f l oor s l ab i n accor dance wi t h t he manuf act ur er ' s r ecommendat i ons. Weat her st r i ppi ng and t hr eshol ds shal l be i nst al l ed at ext er i or door openi ngs t o pr ovi de a weat her t i ght i nst al l at i on. Submi t Dr awi ngs showi ng ( 1) anchor age of component s and appur t enances i nt o t he act ual sur r oundi ng const r uct i on, ( 2) c l ear ances f or oper at i on, and ( 3) har dwar e l ocat i on and i nst al l at i on det ai l s. Submi t compl et e dr awi ngs f or f or ced ent r y r esi st ant pr ef abr i cat ed guar dhouses. Submi t a copy of i nst al l at i on i nst r uct i ons and r ecommended cl eani ng and mai nt enance instructions.

3. 6 MANUFACTURER' S FI ELD SERVI CES

The manuf act ur er shal l pr ovi de t he ser vi ces of a manuf act ur er ' s r epr esent at i ve who i s exper i enced i n t he i nst al l at i on, adj ust ment , and oper at i on of t he component speci f i ed. At t he r equest of t he Cont r act i ng Of f i cer , t he r epr esent at i ve shal l super vi se t he i nst al l at i on, adj ust ment , and oper at i on ( i f oper abl e) of t he component .

3. 7 ADJUSTING/CLEANING

Make adj ust ment s t o assur e smoot h oper at i on. Uni t s shal l be weat her t i ght when cl osed and l ocked. Cl ean component s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons. Use onl y c l eanser r ecommended by t he manuf act ur er t o c l ean pol ycar bonat e, pl ast i c, and appl i ed har dcoat s.

- - End of Sect i on - -

Apr i l 2019 Page 14 SECTI ON 08 34 01