32 01 16.pdf
PDF 12 KB Posted
- Solicitation number
- FA813726R0030
About this file
This is a Technical Specification document for cold milling and asphaltic concrete work at Tinker Air Force Base, Oklahoma, dated April 2019.
The specification covers the removal of existing bituminous pavement surfaces through cold milling to depths and limits designated on project drawings or by the Contracting Officer, including loading, stockpiling, or disposal of milled material. Work is measured and paid by the square yard to the nearest unit, with no payment for milling outside the specified work area. The cold-milling machine must be self-propelled and capable of milling to specified depth and smoothness while maintaining effective control of transverse slope and dust production, without causing damage to pavement structures that are to remain. The contractor must provide all necessary cleaning equipment suitable for removing loose material and all required traffic controls during operations. Prior to milling, pavement surfaces must be cleaned of excessive dirt, clay, and foreign material. The contractor is responsible for collecting, removing, hauling, and disposing of all asphalt millings off-site in accordance with local regulations. Finished mill surfaces must conform to indicated lines, grades, and cross sections, with surfaces at junctures matching abutting pavements. Any damaged items such as manholes, valve boxes, utility lines, or torn, gouged, broken, or undercut pavement must be repaired or replaced as directed by the Contracting Officer. Milled material shall be removed to a stockpile area designated by the contracting officer or disposed of off-base in accordance with all local, state, and federal regulations.
View the file
Other files
Show 40 more
Latest 50 of 184 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tinker AFB, OK TAFB Technical Specifications 2019
April 2019 Page 1 Section 32 01 16
SECTION 32 01 16
COLD MILLING; ASPHALTIC CONCRETE
Part 1 General
This specification covers the removal of the existing bituminous surface by cold milling to the depths and limits shown on the drawings or as established by the Contracting Officer. It also includes the loading and stockpiling or disposal of the milled material.
1.1 Unit Prices
1.1.1 Measurement
The unit of measurement for milling shall be square yards.
1.1.2 Payment
Payment will be to the nearest square yard. No payment will be made for milling outside of the specified area of work.
1.2 Equipment, Tools, and Machines
All equipment, tools and machine used in the performance of the work shall be maintained in a satisfactory working condition.
1.2.1 Cold-Milling Machine
1.2.1.1 The cold-milling machine shall be a self-propelled machine capable of milling the pavement to a specified depth and smoothness.
1.2.1.2 The milling machine shall have effective means of
controlling transverse slope.
1.2.1.3 The milling machine shall have an effective means of
controlling dust produced during the pavement milling operation.
1.2.1.4 The milling machine shall not cause damage to any part of the pavement structure that is not to be removed.
1.2.2 Cleaning Equipment
1.2.2.1 All cleaning equipment shall be suitable for removing and cleaning loose material from the pavement surface.
Tinker AFB, OK TAFB Technical Specifications 2019
April 2019 Page 2 Section 32 01 16
1.3 Quality Assurance
1.3.1 Grade
1.3.1.1 The finished mill surfaces shall conform to the lines, grades, and cross sections indicated on the drawings.
1.3.1.2 Finished surfaces at a juncture with other pavements shall coincide with the finished surfaces of the abutting pavements.
1.3.2 Traffic Control
1.3.2.1 Provide all necessary traffic controls during the milling operation.
PART 2 PRODUCTS – Not Used
PART 3 EXECUTION
3.1 Preparation of Surface
3.1.1 The pavement surface shall be cleaned of excessive dirt, clay, or other foreign material immediately prior to milling the pavement.
3.2 Milling Operation
3.2.1 Sufficient passes shall be made so that the designated area is milled to the grades and cross sections indicated on the drawings.
3.2.2 The Contractor shall collect, remove, haul, and dispose of all asphalt millings off site in accordance with all applicable local regulations.
3.2.3 Any items, such as manholes, valve boxes, and utility
lines, damaged or any pavement that is torn, gouged, broken, or undercut shall be repaired or replaced as directed by the Contracting Officer.
3.3 Removal of Material
3.3.1 Milled material shall be removed from the project site to a stockpile area designated by the contracting officer or shall be disposed of, off base, in accordance with all local, state and federal regulations.
- End of Section -
File details come from the government source that posted it. Updated .