33 11 00.pdf

Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 33 11 00

* * * WATER UTI LI TY DI STRI BUTI ON PI PI NG

PART 1 GENERAL

1. 1 UNI T PRI CES

Measur ement and payment wi l l be based on compl et ed wor k per f or med i n accor dance wi t h t he dr awi ngs, speci f i cat i ons, and t he Cont r act payment schedules.

1. 1. 1 Measurement

The l engt h of wat er l i nes wi l l be det er mi ned by measur i ng al ong t he cent er l i nes of t he var i ous s i zes of pi pe pr ovi ded. Pi pe wi l l be measur ed f r om cent er of f i t t i ng t o cent er of f i t t i ng, f r om cent er of wat er mai n t o cent er of f i r e hydr ant and f r om cent er of wat er mai n t o end of ser vi ce connect i on. No deduct i on wi l l be made f or t he space occupi ed by val ves or fittings.

1. 1. 2 Payment

Payment wi l l be made f or wat er l i nes at t he Cont r act uni t pr i ce per l i near f oot f or t he var i ous t ypes and si zes of wat er l i nes, and wi l l be f ul l compensat i on f or al l pi pes, j oi nt s, speci al s, and f i t t i ngs, compl et e and i n pl ace. Payment f or f i r e hydr ant s, val ves, and val ve boxes wi l l be made at t he r espect i ve Cont r act uni t pr i ce each f or such i t ems compl et e and i n pl ace. Payment wi l l i ncl ude pr ovi di ng al l t est i ng, pl ant , l abor , and mat er i al and i nci dent al s necessar y t o compl et e t he wor k, as speci f i ed and as shown.

1. 2 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

(AASHTO)

AASHTO HB- 17 ( 2002; Er r at a 2003; Er r at a 2005, 17t h Edi t i on) St andar d Speci f i cat i ons f or Hi ghway Br i dges

AMERI CAN RAI LWAY ENGI NEERI NG AND MAI NTENANCE- OF- WAY ASSOCI ATI ON

(AREMA)

AREMA Eng Man ( 2017) Manual f or Rai l way Engi neer i ng

AMERI CAN WATER WORKS ASSOCI ATI ON ( AWWA)

AWWA B300 ( 2010; Addenda 2011) Hypochl or i t es

AWWA B301 ( 2010) Li qui d Chl or i ne

AWWA C104/ A21. 4 ( 2016) Cement - Mor t ar Li ni ng f or

Apr i l 2019 Page 1 SECTI ON 33 11 00

Duct i l e- I r on Pi pe and Fi t t i ngs f or Wat er

AWWA C105/ A21. 5 ( 2010) Pol yet hyl ene Encasement f or Duct i l e- I r on Pi pe Syst ems

AWWA C110/ A21. 10 ( 2012) Duct i l e- I r on and Gr ay- I r on Fi t t i ngs f or Wat er

AWWA C111/ A21. 11 ( 2017) Rubber - Gasket Joi nt s f or Duct i l e- I r on Pr essur e Pi pe and Fi t t i ngs

AWWA C115/ A21. 15 ( 2011) Fl anged Duct i l e- I r on Pi pe Wi t h Duct i l e- I r on or Gr ay- I r on Thr eaded Fl anges

AWWA C151/ A21. 51 ( 2017) Duct i l e- I r on Pi pe, Cent r i f ugal l y Cast

AWWA C153/ A21. 53 ( 2011) Duct i l e- I r on Compact Fi t t i ngs f or Wat er Ser vi ce

AWWA C200 ( 2012) St eel Wat er Pi pe - 6 I n. ( 150 mm) and Lar ger

AWWA C203 ( 2008) Coal - Tar Pr ot ect i ve Coat i ngs and Li ni ngs f or St eel Wat er Pi pel i nes - Enamel and Tape - Hot - Appl i ed

AWWA C205 ( 2012) Cement - Mor t ar Pr ot ect i ve Li ni ng and Coat i ng f or St eel Wat er Pi pe - 4 I n. ( 100

mm) and Lar ger - Shop Appl i ed

AWWA C206 ( 2017) Fi el d Wel di ng of St eel Wat er Pi pe

AWWA C207 ( 2018) St andar d f or St eel Pi pe Fl anges f or Wat er wor ks Ser vi ce, Si zes 4 i n. t hr ough 144 i n. ( 100 mm t hr ough 3600 mm)

AWWA C208 ( 2017) Di mensi ons f or Fabr i cat ed St eel Wat er Pi pe Fi t t i ngs

AWWA C209 ( 2013) Col d- Appl i ed Tape Coat i ngs f or t he Ext er i or of Speci al Sect i ons, Connect i ons and Fi t t i ng f or St eel Wat er Pi pel i nes

AWWA C210 ( 2007) St andar d f or Li qui d Epoxy Coat i ng Syst ems f or t he I nt er i or and Ext er i or of St eel Wat er Pi pel i nes

AWWA C213 ( 2015) Fusi on- Bonded Epoxy Coat i ng f or t he I nt er i or and Ext er i or of St eel Wat er Pipelines

AWWA C300 ( 2016) Rei nf or ced Concr et e Pr essur e Pi pe, St eel - Cyl i nder Type

AWWA C301 ( 2014) Pr est r essed Concr et e Pr essur e Pi pe, St eel - Cyl i nder Type

AWWA C303 ( 2017) Concr et e Pr essur e Pi pe, Apr i l 2019 Page 2 SECTI ON 33 11 00

Bar - Wr apped, St eel - Cyl i nder Type

AWWA C500 ( 2009) Met al - Seat ed Gat e Val ves f or Wat er Suppl y Ser vi ce

AWWA C502 ( 2014) Dr y- Bar r el Fi r e Hydr ant s

AWWA C503 ( 2014) Wet - Bar r el Fi r e Hydr ant s

AWWA C504 ( 2015) St andar d f or Rubber - Seat ed But t er f l y Val ves

AWWA C508 ( 2017) Swi ng- Check Val ves f or Wat er wor ks Ser vi ce, 2 I n. Thr ough 48- I n. ( 50- mm Thr ough 1, 200- mm) NPS

AWWA C509 ( 2015) Resi l i ent - Seat ed Gat e Val ves f or Wat er Suppl y Ser vi ce

AWWA C511 ( 2017) Reduced- Pr essur e Pr i nci pl e Backf l ow Pr event i on Assembl y

AWWA C512 ( 2015) Ai r - Rel ease, Ai r / Vacuum, and Combi nat i on Ai r Val ves f or Wat er and Wast ewat er Ser vi ce

AWWA C515 ( 2015) Reduced- Wal l , Resi l i ent - Seat ed Gat e Val ves f or Wat er Suppl y Ser vi ce

AWWA C550 ( 2017) Pr ot ect i ve I nt er i or Coat i ngs f or Val ves and Hydr ant s

AWWA C600 ( 2017) I nst al l at i on of Duct i l e- I r on Mai ns and Thei r Appur t enances

AWWA C602 ( 2011) Cement –Mor t ar Li ni ng of Wat er Pi pel i nes i n Pl ace—4 I n. ( 100 mm) and Larger

AWWA C604 ( 2011) I nst al l at i on of Bur i ed St eel Wat er Pi pe—4 I n. ( 100 mm) and Lar ger

AWWA C605 ( 2014) Under gr ound I nst al l at i on of Pol yvi nyl Chl or i de ( PVC) and Mol ecul ar l y Or i ent ed Pol yvi nyl Chl or i de ( PVCO) Pr essur e Pi pe and Fi t t i ngs

AWWA C606 ( 2015) Gr ooved and Shoul der ed Joi nt s

AWWA C651 ( 2014) St andar d f or Di s i nf ect i ng Wat er Mains

AWWA C655 ( 2009) Fi el d Dechl or i nat i on

AWWA C700 ( 2015) Col d- Wat er Met er s - Di spl acement Type, Met al Al l oy Mai n Case

AWWA C701 ( 2015) Col d- Wat er Met er s - Tur bi ne Type f or Cust omer Ser vi ce

Apr i l 2019 Page 3 SECTI ON 33 11 00

AWWA C702 ( 2015) Col d- Wat er Met er s - Compound Type

AWWA C703 ( 2015) Col d- Wat er Met er s - Fi r e Ser vi ce Type

AWWA C704 ( 2015) Pr opel l er - Type Met er s f or Wat er wor ks Appl i cat i ons

AWWA C706 ( 2010) Di r ect - Readi ng, Remot e- Regi st r at i on Syst ems f or Col d- Wat er Met er s

AWWA C707 ( 2010; R 2016) Encoder - Type Remot e- Regi st r at i on Syst ems f or Col d- Wat er Meters

AWWA C800 ( 2014) Under gr ound Ser vi ce Li ne Val ves and Fittings

AWWA C900 ( 2016) Pol yvi nyl Chl or i de ( PVC) Pr essur e Pi pe, and Fabr i cat ed Fi t t i ngs, 4 I n.

Thr ough 60 I n. ( 100 mm Thr ough 1, 500 mm)

AWWA C906 ( 2015) Pol yet hyl ene ( PE) Pr essur e Pi pe and Fi t t i ngs, 4 I n. ( 100 mm) t hr ough 65 I n. , ( 1, 575 mm) f or Wat er Di st r i but i on and Transmission

AWWA C909 ( 2016) Mol ecul ar l y Or i ent ed Pol yvi nyl Chl or i de ( PVCO) Pr essur e Pi pe, 4 I n. ( 100

mm) and Lar ger

AWWA C950 ( 2013) Fi ber gl ass Pr essur e Pi pe

AWWA M11 ( 2016) St eel Pi pe: A Gui de f or Desi gn and Installation

AWWA M23 ( 2002; 2nd Ed) Manual : PVC Pi pe - Desi gn and I nst al l at i on

AWWA M41 ( 2009; 3r d Ed) Duct i l e- I r on Pi pe and Fittings

AWWA M45 ( 2013; 3r d Ed) Fi ber gl ass Pi pe Desi gn

AWWA M55 ( 2006) PE Pi pe - Desi gn and I nst al l at i on

AWWA M6 ( 2012) Wat er Met er s - Sel ect i on, I nst al l at i on, Test i ng, and Mai nt enance

AWWA M9 ( 2008; Er r at a 2013) Manual : Concr et e Pr essur e Pi pe

ASME I NTERNATI ONAL ( ASME)

ASME B1. 20. 1 ( 2013) Pi pe Thr eads, Gener al Pur pose ( I nch)

ASME B1. 20. 3 ( 1976; R 2013) Dr yseal Pi pe Thr eads ( I nch)

Apr i l 2019 Page 4 SECTI ON 33 11 00

ASME B16. 1 ( 2015) Gr ay I r on Pi pe Fl anges and Fl anged Fi t t i ngs Cl asses 25, 125, and 250

ASME B16. 18 ( 2012) Cast Copper Al l oy Sol der Joi nt Pr essur e Fi t t i ngs

ASME B16. 26 ( 2013) St andar d f or Cast Copper Al l oy Fi t t i ngs f or Fl ar ed Copper Tubes

ASME B16. 3 ( 2011) Mal l eabl e I r on Thr eaded Fi t t i ngs, Cl asses 150 and 300

ASME B16. 4 ( 2011) St andar d f or Gr ay I r on Thr eaded Fi t t i ngs; Cl asses 125 and 250

ASME B18. 2. 2 ( 2015) Nut s f or Gener al Appl i cat i ons:

Machi ne Scr ew Nut s, Hex, Squar e, Hex Fl ange, and Coupl i ng Nut s ( I nch Ser i es)

ASME B18. 5. 2. 1M ( 2006; R 2011) Met r i c Round Head Shor t Squar e Neck Bol t s

ASME B18. 5. 2. 2M ( 1982; R 2010) Met r i c Round Head Squar e Neck Bol t s

ASTM I NTERNATI ONAL ( ASTM)

ASTM A276/ A276M ( 2017) St andar d Speci f i cat i on f or St ai nl ess St eel Bar s and Shapes

ASTM A307 ( 2014; E 2017) St andar d Speci f i cat i on f or Car bon St eel Bol t s, St uds, and Thr eaded Rod 60 000 PSI Tensi l e St r engt h

ASTM A47/ A47M ( 1999; R 2014) St andar d Speci f i cat i on f or Fer r i t i c Mal l eabl e I r on Cast i ngs

ASTM A48/ A48M ( 2003; R 2012) St andar d Speci f i cat i on f or Gr ay I r on Cast i ngs

ASTM A53/ A53M ( 2012) St andar d Speci f i cat i on f or Pi pe, St eel , Bl ack and Hot - Di pped, Zi nc- Coat ed, Wel ded and Seaml ess

ASTM A536 ( 1984; R 2014) St andar d Speci f i cat i on f or Duct i l e I r on Cast i ngs

ASTM A563 ( 2015) St andar d Speci f i cat i on f or Car bon and Al l oy St eel Nut s

ASTM A563M ( 2007; R 2013) St andar d Speci f i cat i on f or Car bon and Al l oy St eel Nut s ( Met r i c)

ASTM A746 ( 2009; R 2014) St andar d Speci f i cat i on f or Duct i l e I r on Gr avi t y Sewer Pi pe

ASTM B32 ( 2008; R 2014) St andar d Speci f i cat i on f or Sol der Met al

Apr i l 2019 Page 5 SECTI ON 33 11 00

ASTM B584 ( 2014) St andar d Speci f i cat i on f or Copper Al l oy Sand Cast i ngs f or Gener al Applications

ASTM B61 ( 2015) St andar d Speci f i cat i on f or St eam or Val ve Br onze Cast i ngs

ASTM B62 ( 2017) St andar d Speci f i cat i on f or Composi t i on Br onze or Ounce Met al Cast i ngs

ASTM B88 ( 2016) St andar d Speci f i cat i on f or Seaml ess Copper Wat er Tube

ASTM B88M ( 2018) St andar d Speci f i cat i on f or Seaml ess Copper Wat er Tube ( Met r i c)

ASTM C1433 ( 2016b) St andar d Speci f i cat i on f or Pr ecast Rei nf or ced Concr et e Monol i t hi c Box Sect i ons f or Cul ver t s, St or m Dr ai ns, and Sewers

ASTM C150/ C150M ( 2018) St andar d Speci f i cat i on f or Por t l and Cement

ASTM C94/ C94M ( 2017a) St andar d Speci f i cat i on f or Ready- Mi xed Concr et e

ASTM D1599 ( 2014; E 2015) Resi st ance t o Shor t - Ti me Hydr aul i c Fai l ur e Pr essur e of Pl ast i c Pi pe, Tubi ng, and Fi t t i ngs

ASTM D1784 ( 2011) St andar d Speci f i cat i on f or Ri gi d Pol y( Vi nyl Chl or i de) ( PVC) Compounds and Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Compounds

ASTM D1785 ( 2015; E 2018) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) , Pl ast i c Pi pe, Schedul es 40, 80, and 120

ASTM D2241 ( 2015) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pr essur e- Rat ed Pi pe ( SDR Ser i es)

ASTM D2466 ( 2017) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 40

ASTM D2467 ( 2015) St andar d Speci f i cat i on f or Pol y( Vi nyl Chl or i de) ( PVC) Pl ast i c Pi pe Fi t t i ngs, Schedul e 80

ASTM D2774 ( 2012) Under gr ound I nst al l at i on of Ther mopl ast i c Pr essur e Pi pi ng

ASTM D2855 ( 2015) St andar d Pr act i ce f or Maki ng Sol vent - Cement ed Joi nt s wi t h Pol y( Vi nyl Chl or i de) ( PVC) Pi pe and Fi t t i ngs

Apr i l 2019 Page 6 SECTI ON 33 11 00

ASTM D3035 ( 2015) Pol yet hyl ene ( PE) Pl ast i c Pi pe ( DR- PR) Based on Cont r ol l ed Out si de Diameter

ASTM D3139 ( 1998; R 2011) Joi nt s f or Pl ast i c Pr essur e Pi pes Usi ng Fl exi bl e El ast omer i c Seal s

ASTM D3261 ( 2016) St andar d Speci f i cat i on f or But t Heat Fusi on Pol yet hyl ene ( PE) Pl ast i c Fi t t i ngs f or Pol yet hyl ene ( PE) Pl ast i c Pi pe and Tubi ng

ASTM D3839 ( 2014) Under gr ound I nst al l at i on of " Fi ber gl ass" ( Gl ass- Fi ber - Rei nf or ced Ther moset t i ng- Resi n) Pi pe

ASTM D4161 ( 2014) " Fi ber gl ass" (Glass-Fiber-Reinforced Ther moset t i ng- Resi n) Pi pe Joi nt s Usi ng Fl exi bl e El ast omer i c Seal s

ASTM F1483 ( 2017) St andar d Speci f i cat i on f or Or i ent ed Pol y( Vi nyl Chl or i de) , PVCO, Pr essur e Pi pe

ASTM F1674 ( 2011) St andar d Test Met hod f or Joi nt Rest r ai nt Pr oduct s f or Use wi t h PVC Pi pe

ASTM F1962 ( 2011) St andar d Gui de f or Use of Maxi - Hor i zont al Di r ect i onal Dr i l l i ng f or Pl acement of Pol yet hyl ene Pi pe or Condui t Under Obst acl es, I ncl udi ng Ri ver Cr ossi ngs

ASTM F2164 ( 2013) St andar d Pr act i ce f or Fi el d Leak Test i ng of Pol yet hyl ene ( PE) and Cr ossl i nked Pol yet hyl ene ( PEX) Pr essur e Pi pi ng Syst ems Usi ng Hydr ost at i c Pr essur e

ASTM F2620 ( 2013) St andar d Pr act i ce f or Heat Fusi on Joi ni ng of Pol yet hyl ene Pi pe and Fi t t i ngs

ASTM F402 ( 2005; R 2012) Saf e Handl i ng of Sol vent Cement s, Pr i mer s, and Cl eaner s Used f or Joi ni ng Ther mopl ast i c Pi pe and Fi t t i ngs

ASTM F477 ( 2014) St andar d Speci f i cat i on f or El ast omer i c Seal s ( Gasket s) f or Joi ni ng Pl ast i c Pi pe

ASTM F714 ( 2013) Pol yet hyl ene ( PE) Pl ast i c Pi pe ( SDR- PR) Based on Out si de Di amet er

FOUNDATI ON FOR CROSS- CONNECTI ON CONTROL AND HYDRAULI C RESEARCH

(FCCCHR)

FCCCHR Li st ( cont i nuousl y updat ed) Li st of Appr oved Backf l ow Pr event i on Assembl i es

FCCCHR Manual ( 10t h Edi t i on) Manual of Cr oss- Connect i on Control

Apr i l 2019 Page 7 SECTI ON 33 11 00

MANUFACTURERS STANDARDI ZATI ON SOCI ETY OF THE VALVE AND FI TTI NGS

I NDUSTRY ( MSS)

MSS SP- 80 ( 2013) Br onze Gat e, Gl obe, Angl e and Check Valves

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 1961 ( 2013) St andar d on Fi r e Hose

NFPA 1963 ( 2014) St andar d f or Fi r e Hose Connect i ons

NFPA 24 ( 2016; ERTA 2016) St andar d f or t he I nst al l at i on of Pr i vat e Fi r e Ser vi ce Mai ns and Thei r Appur t enances

NSF I NTERNATI ONAL ( NSF)

NSF 372 ( 2011) Dr i nki ng Wat er Syst em Component s - Lead Cont ent

NSF/ ANSI 14 ( 2017b) Pl ast i cs Pi pi ng Syst em Component s and Rel at ed Mat er i al s

NSF/ ANSI 61 ( 2017) Dr i nki ng Wat er Syst em Component s - Heal t h Ef f ect s

U. S. DEPARTMENT OF DEFENSE ( DOD)

UFC 3- 600- 01 ( 2016; wi t h Change 1) Fi r e Pr ot ect i on Engi neer i ng f or Faci l i t i es

UNDERWRI TERS LABORATORI ES ( UL)

UL 246 ( 2011; Repr i nt Feb 2013) Hydr ant s f or Fi r e- Pr ot ect i on Ser vi ce

UL 262 ( 2004; Repr i nt Oct 2011) Gat e Val ves f or Fi r e- Pr ot ect i on Ser vi ce

UL 312 ( 2010; Repr i nt Mar 2018) UL St andar d f or Saf et y Check Val ves f or Fi r e- Pr ot ect i on Service

UNI - BELL PVC PI PE ASSOCI ATI ON ( UBPPA)

UBPPA UNI - PUB- 08 ( 2016) Tappi ng Gui de f or PVC Pr essur e Pi pe

1. 3 DEFINITIONS

1. 3. 1 Wat er Tr ansmi ssi on Mai ns

Wat er t r ansmi ssi on mai ns i ncl ude wat er pi pi ng havi ng di amet er s gr eat er t han 14 i nch, speci f i c mat er i al s, met hods of j oi ni ng and any appur t enances deemed necessar y f or a sat i sf act or y syst em.

Apr i l 2019 Page 8 SECTI ON 33 11 00

1. 3. 2 Wat er Mai ns

Wat er mai ns i ncl ude wat er pi pi ng havi ng di amet er s 4 t hr ough 14 i nch, speci f i c mat er i al s, met hods of j oi ni ng and any appur t enances deemed necessar y f or a sat i sf act or y syst em.

1. 3. 3 Wat er Ser vi ce Li nes

Wat er ser vi ce l i nes i ncl ude wat er pi pi ng f r om a wat er mai n t o a bui l di ng ser vi ce at a poi nt appr oxi mat el y 5 f eet f r om bui l di ng or t he poi nt i ndi cat ed on t he dr awi ngs, speci f i c mat er i al s, met hods of j oi ni ng and any appur t enances deemed necessar y f or a sat i sf act or y syst em.

1. 3. 4 Addi t i onal Def i ni t i ons

For addi t i onal def i ni t i ons r ef er t o t he def i ni t i ons i n t he appl i cabl e r ef er enced st andar d.

1. 4 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e [ f or Cont r act or Qual i t y Cont r ol appr oval . ] [ f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on

01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Connect i ons; G

SD- 03 Pr oduct Dat a

Pi pe, Fi t t i ngs, Joi nt s and Coupl i ngs; G

Bal l And Socket Joi nt ; G

Val ves; G

Val ve Boxes; G

Fi r e Hydr ant s; G

Pi pe Rest r ai nt ; G

Tappi ng Sl eeves; G

Cor por at i on St ops; G

Backf l ow Pr event er ; G

Rai l r oad Cr ossi ng Casi ng Pi pe; G

Pr ecast Concr et e Thr ust Bl ocks; G

Di si nf ect i on Pr ocedur es; G

Apr i l 2019 Page 9 SECTI ON 33 11 00

SD- 06 Test Repor t s

Backf l ow Pr event er Test s; G

Bact er i ol ogi cal Sampl es; G

Post - Const r uct i on Fusi on Repor t ; G

Leakage Test

Hydr ost at i c Test

SD- 07 Cer t i f i cat es

Pi pe, Fi t t i ngs, Joi nt s and Coupl i ngs

Shop- Appl i ed Li ni ng [ and Coat i ng]

Lining

Li ni ng f or Fi t t i ngs

Valves

Fi r e Hydr ant s

Backf l ow Pr event i on Tr ai ni ng Cer t i f i cat e

Backf l ow Test er Cer t i f i cat i on

Fusi on Techni c i an Qual i f i cat i ons; G

Tur bi ne Type Met er s

Pr opel l er Type Met er s

Di spl acement Type Met er s

Compound Type Met er s

Fi r e Ser vi ce Type Met er s

Backf l ow Cer t i f i cat e

SD- 08 Manuf act ur er ' s I nst r uct i ons

Duct i l e I r on Pi pi ng

PVC Pi pi ng

PVCO Pi pi ng

Pol yet hyl ene ( PE) Pi pe

Fi ber gl ass Pi pe, Fi t t i ngs, Joi nt s And Joi nt Mat er i al s

Concr et e Pr essur e Pi pe

Pr est r essed Concr et e Pr essur e Pi pe

Apr i l 2019 Page 10 SECTI ON 33 11 00

Rei nf or ced Concr et e Cyl i nder Pi pe

PVC Pi pi ng For Ser vi ce Li nes

Copper Pi pe For Ser vi ce Li nes

1. 5 QUALI TY CONTROL

1. 5. 1 Regul at or y Requi r ement s

Compl y wi t h NSF/ ANSI 14 or NSF/ ANSI 61 and NSF 372 f or mat er i al s f or pot abl e wat er syst ems; compl y wi t h l ead cont ent r equi r ement s f or " l ead- f r ee" pl umbi ng as def i ned by t he U. S. Saf e Dr i nki ng Wat er Act ef f ect i ve Januar y 2014. Pr ovi de mat er i al s bear i ng t he seal of t he Nat i onal Sani t at i on Foundat i on ( NSF) f or pot abl e wat er ser vi ce.

Compl y wi t h NFPA 24 f or mat er i al s, i nst al l at i on, and t est i ng of f i r e mai n pi pi ng and component s.

1. 5. 2 Qualifications

1. 5. 2. 1 Backf l ow Pr event er s

1. 5. 2. 1. 1 Backf l ow Pr event er Cer t i f i cat e

Cer t i f i cat e of Ful l Appr oval f r om FCCCHR Li st , Uni ver si t y of Sout her n Cal i f or ni a, at t est i ng t hat t he desi gn, s i ze and make of each backf l ow pr event er has sat i sf act or i l y passed t he compl et e sequence of per f or mance t est i ng and eval uat i on f or t he r espect i ve l evel of appr oval . Cer t i f i cat e of Pr ovi s i onal Appr oval wi l l not be accept abl e.

[ 1. 5. 2. 1. 1. 1 Backf l ow Test er Cer t i f i cat e

Pr i or t o t est i ng, submi t t o t he Cont r act i ng Of f i cer cer t i f i cat i on i ssued by t he St at e or l ocal r egul at or y agency at t est i ng t hat t he backf l ow t est er has successf ul l y compl et ed a cer t i f i cat i on cour se sponsor ed by t he r egul at or y agency. [ Test er must not be af f i l i at ed wi t h any company par t i c i pat i ng i n any ot her phase of t hi s Cont r act . ]

] 1. 5. 2. 1. 1. 2 Backf l ow Pr event i on Tr ai ni ng Cer t i f i cat e

Submi t a cer t i f i cat e r ecogni zed by t he St at e or l ocal aut hor i t y t hat st at es t he Cont r act or has compl et ed at l east 10 hour s of t r ai ni ng i n backf l ow pr event er i nst al l at i ons. The cer t i f i cat e must be cur r ent .

1. 5. 2. 2 Fusi on Techni c i an Qual i f i cat i ons

Submi t a cer t i f i cat e f r om t he manuf act ur er of t he f usi bl e pi pe t hat shows t he f usi on t echni c i an i s f ul l y qual i f i ed t o i nst al l f usi bl e pi pe of t he t ypes and si zes bei ng used. Qual i f i cat i on must be cur r ent as of t he act ual dat e of f usi on per f or mance on t he pr oj ect .

1. 6 DELI VERY, STORAGE, AND HANDLI NG

1. 6. 1 Del i ver y and St or age

I nspect mat er i al s del i ver ed t o s i t e f or damage. Unl oad and st or e wi t h mi ni mum handl i ng and i n accor dance wi t h manuf act ur er ' s i nst r uct i ons.

Apr i l 2019 Page 11 SECTI ON 33 11 00

St or e mat er i al s on si t e i n encl osur es or under pr ot ect i ve cover i ng. St or e pl ast i c pi pi ng, j oi nt i ng mat er i al s and r ubber gasket s under cover out of di r ect sunl i ght . Do not st or e mat er i al s di r ect l y on t he gr ound. Keep i nsi de of pi pes, f i t t i ngs, val ves, f i r e hydr ant s, and ot her accessor i es f r ee of di r t and debr i s.

1. 6. 2 Handling

Handl e pi pe, f i t t i ngs, val ves, f i r e hydr ant s, and ot her accessor i es i n accor dance wi t h manuf act ur er ' s i nst r uct i ons and i n a manner t o ensur e del i ver y t o t he t r ench i n sound undamaged condi t i on. Avoi d i nj ur y t o coat i ngs and l i ni ngs on pi pe and f i t t i ngs; make r epai r s i f coat i ngs or l i ni ngs ar e damaged. Do not pl ace ot her mat er i al , hooks, or pi pe i nsi de a pi pe or f i t t i ng af t er t he coat i ng has been appl i ed. I nspect t he pi pe f or def ect s bef or e i nst al l at i on. Car r y, do not dr ag pi pe t o t he t r ench. Use of pi nch bar s and t ongs f or al i gni ng or t ur ni ng pi pe wi l l be per mi t t ed onl y on t he bar e ends of t he pi pe. Cl ean t he i nt er i or of pi pe and accessor i es of f or ei gn mat t er bef or e bei ng l ower ed i nt o t he t r ench and keep t hem cl ean dur i ng l ayi ng oper at i ons by pl uggi ng. Repl ace def ect i ve mat er i al wi t hout addi t i onal expense t o t he Gover nment . St or e r ubber gasket s, not i mmedi at el y i nst al l ed, under cover or out of di r ect sunl i ght .

Handl e duct i l e i r on pi pe, f i t t i ngs, and accessor i es i n accor dance wi t h AWWA C600 and AWWA M41. Handl e PVC and PVCO pi pe, f i t t i ngs, and accessor i es i n accor dance wi t h AWWA C605. Handl e PE pi pe, f i t t i ngs, and accessor i es i n accor dance wi t h AWWA M55. [ Handl e f i ber gl ass pi pe, f i t t i ngs, and accessor i es i n accor dance wi t h AWWA M45. ] [ Handl e st eel pi pe, f i t t i ngs and accessor i es i n accor dance wi t h AWWA C604.]

PART 2 PRODUCTS

2. 1 MATERIALS

Pr ovi de al l mat er i al s i n accor dance wi t h AWWA C800 and as i ndi cat ed her ei n. Pr ovi de val ves and f i t t i ngs wi t h pr essur e r at i ngs equi val ent t o t he pr essur e r at i ngs of t he pi pe.

2. 1. 1 Pi pe, Fi t t i ngs, Joi nt s And Coupl i ngs

Submi t manuf act ur er ' s st andar d dr awi ngs or cat al og cut s, except submi t bot h dr awi ngs and cut s f or push- on [ and r ubber - gasket ed bel l - and- spi got ] j oi nt s. I ncl ude i nf or mat i on concer ni ng gasket s wi t h submi t t al f or j oi nt s and coupl i ngs.

2. 1. 1. 1 Duct i l e- I r on Pi pi ng

2. 1. 1. 1. 1 Pi pe and Fi t t i ngs

Pi pe, [ except f l anged pi pe, ] AWWA C151/ A21. 51, [ Pr essur e Cl ass [ _____] ] [ Thi ckness Cl ass [ _____] ] . [ Fl anged pi pe, AWWA C115/ A21. 15. ] Fi t t i ngs, AWWA C110/ A21. 10 or AWWA C153/ A21. 53[ ; f i t t i ngs wi t h push- on j oi nt ends ar e t o meet t he same r equi r ement s as f i t t i ngs wi t h mechani cal - j oi nt ends, except f or t he f act or y modi f i ed bel l desi gn] . Pr ovi de f i t t i ngs wi t h pr essur e r at i ngs equi val ent t o t hat of t he pi pe. Pr ovi de compat i bl e pi pe ends and f i t t i ngs f or t he speci f i ed j oi nt s. Pr ovi de cement - mor t ar l i ni ng, AWWA C104/ A21. 4, [ t wi ce t he] st andar d t hi ckness on pi pe and f i t t i ngs.

Apr i l 2019 Page 12 SECTI ON 33 11 00

2. 1. 1. 1. 2 Joi nt s and Joi nt i ng Mat er i al

[ Pr ovi de [ push- on j oi nt s[ or mechani cal j oi nt s] ] f or pi pe and f i t t i ngs [ unl ess ot her wi se i ndi cat ed] . ] [ Pr ovi de mechani cal j oi nt s wher e i ndi cat ed. ] [ Pr ovi de f l anged j oi nt s wher e i ndi cat ed. ] [ Pr ovi de mechani cal l y coupl ed t ype j oi nt s usi ng a s l eeve- t ype mechani cal coupl i ng wher e i ndi cat ed. ] [ Pr ovi de [ gr ooved] [ or ] [ shoul der ed] t ype j oi nt s wher e indicated.] [ Pr ovi de i nsul at i ng j oi nt s wher e i ndi cat ed. ] [ Sl eeve- t ype mechani cal coupl i ngs i n l i eu of push- on j oi nt s ar e accept abl e, subj ect t o t he l i mi t at i ons speci f i ed i n t he par agr aph SLEEVE- TYPE MECHANI CAL COUPLI NGS. ] [ Ut i l i ze [ gr ooved] [ or ] [ shoul der ed] t ype j oi nt s i n l i eu of [ f l anged j oi nt or ] push- on j oi nt , except wher e j oi nt i s bur i ed. ]

a. Push- On Joi nt s: Shape of pi pe ends and f i t t i ng ends, gasket s, and l ubr i cant f or j oi nt assembl y as r ecommended i n AWWA C111/ A21. 11.

b. Mechani cal Joi nt s: Di mensi onal and mat er i al r equi r ement s f or pi pe ends, gl ands, bol t s and nut s, and gasket s as r ecommended i n

AWWA C111/ A21. 11.

c. Fl anged Joi nt s: Bol t s, nut s, and gasket s f or f l anged connect i ons as r ecommended i n Appendi x A of AWWA C115/ A21. 15. Pr ovi de AWWA C115/ A21. 15 duct i l e i r on f l anges and conf or m t o ASME B16. 1, Cl ass

125. [ Pr ovi de ASTM A536 epoxy coat ed st eel set scr ew f l anges. Gasket and l ubr i cant s f or set scr ew f l anges, i n accor dance wi t h mechani cal - j oi nt gasket s speci f i ed i n AWWA C111/ A21. 11.]

d. I nsul at i ng Joi nt s: Desi gned t o pr event met al - t o- met al cont act at t he j oi nt bet ween adj acent sect i ons of pi pi ng. Pr ovi de f l anged t ype j oi nt wi t h i nsul at i ng gasket , i nsul at i ng bol t s l eeves, and i nsul at i ng washer s. Pr ovi de f ul l f ace di el ect r i c t ype gasket s, as r ecommended i n t he Appendi x t o AWWA C115/ A21. 15. Bol t s and nut s, as r ecommended i n t he Appendi x t o AWWA C115/ A21. 15.

e. Sl eeve- Type Mechani cal Coupl ed Joi nt s: As speci f i ed i n t he par agr aph

SLEEVE- TYPE MECHANI CAL COUPLI NGS.

[ f . [ Gr ooved] [ and] [ Shoul der ed] Type Joi nt s: [ Gr ooved] [ and] [ shoul der ed] pi pe ends and coupl i ngs, AWWA C606. Joi nt di mensi on as speci f i ed i n AWWA C606 f or r i gi d j oi nt s [ , j oi nt di mensi ons as speci f i ed i n AWWA C606 f or f l exi bl e j oi nt s] .

] 2. 1. 1. 2 Pl ast i c Pi pi ng

2. 1. 1. 2. 1 PVC and PVCO Pi pi ng

2. 1. 1. 2. 1. 1 PVC Pi pi ng

AWWA C900 pl ai n end or gasket bel l end pi pe meet i ng or exceedi ng ASTM D1784 cel l c l ass 12454, wi t h a mi ni mum Pr essur e Cl ass [ 150 ( DR27. 5) ] , [ 165 ( DR25) ] , [ 200 ( DR21) ] , [ 235 ( DR 18) ] , [ 250 ( DR17) ] [ 305 ( DR 14) ] wi t h duct i l e i r on out si de di amet er ( DI OD) .

2. 1. 1. 2. 1. 2 PVCO Pi pi ng

AWWA C909, ASTM F1483 pl ai n end or gasket bel l end pi pe meet i ng or exceeding ASTM D1784 cel l c l ass 12454, Pr essur e Cl ass [ 165] [ _____] PVCO pr essur e pi pe, wi t h duct i l e i r on out si de di amet er ( DI OD) .

Apr i l 2019 Page 13 SECTI ON 33 11 00

2. 1. 1. 2. 1. 3 Fi t t i ngs f or PVC and PVCO Pi pe

Gr ay i r on or duct i l e i r on f i t t i ngs, AWWA C110/ A21. 10 wi t h speci al f i t t i ngs i n accor dance wi t h Appendi x B or AWWA C153/ A21. 53, wi t h cement - mor t ar l i ni ng f or f i t t i ngs, AWWA C104/ A21. 4, st andar d t hi ckness. Fi t t i ngs wi t h push- on j oi nt ends ar e t o conf or m t o t he same r equi r ement s as f i t t i ngs wi t h mechani cal - j oi nt ends, except f or t he f act or y modi f i ed bel l desi gn compat i bl e f or use wi t h PVC pi pe as speci f i ed.

[ Fi t t i ngs f r om mat er i al t hat meet s or exceeds ASTM D1784 cel l c l ass 12454 and i s t he same mat er i al as t he pi pe wi t h el ast omer i c gasket s, i n conf or mance wi t h AWWA C605 and AWWA C900.

] 2. 1. 1. 2. 1. 4 Joi nt s and Joi nt i ng Mat er i al f or PVC and PVCO Pi pi ng

a. Push- on j oi nt s: Use j oi nt i ng mat er i al i n accor dance wi t h ASTM D3139 and AWWA C111/ A21. 11 bet ween pi pes, pi pes and met al f i t t i ngs, val ves, and ot her accessor i es or compr essi on- t ype j oi nt s/ mechani cal j oi nt s.

Pr ovi de each j oi nt connect i on wi t h an el ast omer i c gasket compat i bl e f or t he bel l or coupl i ng used. Gasket s f or push- on j oi nt s f or pi pe, ASTM F477. Gasket s f or push- on j oi nt s and compr essi on- t ype j oi nt s/ mechani cal j oi nt s f or j oi nt connect i ons bet ween pi pe and met al f i t t i ngs, val ves, and ot her accessor i es, AWWA C111/ A21. 11, r espect i vel y, f or push- on j oi nt s and mechani cal j oi nt s.

b. Mechani cal Joi nt : Use mechani cal l y coupl ed j oi nt s havi ng a s l eeve- t ype mechani cal coupl i ng, as speci f i ed i n t he par agr aph SLEEVE- TYPE MECHANI CAL COUPLI NGS, as an opt i onal j oi nt i ng met hod f or pl ai n- end PVC pi pe, subj ect t o t he l i mi t at i ons speci f i ed f or mechani cal l y coupl ed j oi nt s usi ng a s l eeve- t ype mechani cal coupl i ng as speci f i ed f or compr essi on- t ype j oi nt s i n ASTM D3139. Pr ovi de j oi nt i ng mat er i al i n accor dance wi t h AWWA C111/ A21. 11 bet ween pi pe and sl eeve- t ype mechani cal coupl i ngs.

2. 1. 1. 2. 2 PVC Pi pi ng f or Ser vi ce Li nes

2. 1. 1. 2. 2. 1 Pi pe and Fi t t i ngs

Provide ASTM D1784 cel l c l ass 12454 pi pe and f i t t i ngs of t he same PVC material.

a. ASTM D1785, Schedul e 40 wi t h ASTM D2466 Schedul e 40 or ASTM D2467 Schedul e 80 f i t t i ngs.

b. ASTM D2241 pi pe and f i t t i ngs wi t h SDR as necessar y t o pr ovi de 150 psi mi ni mum pr essur e r at i ng wi t h ASTM D2466 Schedul e 40 or ASTM D2467 Schedul e 80 f i t t i ngs.

2. 1. 1. 2. 2. 2 Joi nt s and Connect i ons

Fi t t i ngs may be j oi ned by t he sol vent - cement met hod or t hr eadi ng.

2. 1. 1. 2. 2. 3 Sol vent Joi ni ng

Pr ovi de sol vent j oi nt s i n accor dance wi t h ASTM D2855.

2. 1. 1. 2. 3 Pol yet hyl ene ( PE) Pi pe

AWWA C906, ASTM D3035, PE4710, mat er i al desi gnat i on code[ CC2] [ CC3] wi t h a

Apr i l 2019 Page 14 SECTI ON 33 11 00 mi ni mum Pr essur e Cl ass [ 200 ( DR11) ] [ 250 ( DR 9) ] [ 335 ( DR 7) ] wi t h duct i l e i r on out si de di amet er ( DI OD) .

2. 1. 1. 2. 3. 1 Fi t t i ngs For PE Pi pe

AWWA C906, AWWA M55, ASTM D3035, mol ded and manuf act ur ed t o compl y wi t h

ASTM F714.

2. 1. 1. 2. 3. 2 Joi nt s and Joi nt i ng Mat er i al s

Mechani cal Joi nt : AWWA C111/ A21. 11 DI OD Mechani cal j oi nt adapt er and gasket s f or mechani cal j oi nt s f or j oi nt connect i ons bet ween pi pe and met al f i t t i ngs, val ves, and ot her accessor i es.

2. 1. 1. 3 Fi ber gl ass Pi pe, Fi t t i ngs, Joi nt s and Joi nt Mat er i al s

AWWA C950, Type [ I ] [ I I ] , Pr essur e Cl ass 150 wi t h a mi ni mum pi pe st i f f ness of 36 psi , Gr ade [ 1] [ 2] [ 3] [ 4] , Li ner [ A] [ B] [ C] [ D] [ E] [ F] .

a. Pr ovi de pi pe wi t h a qui ck- bur st st r engt h gr eat er t han or equal t o f our t i mes t he nor mal wor ki ng pr essur e of t he pi pe. The qui ck- bur st st r engt h t est i s t o meet t he r equi r ement s of ASTM D1599.

b. Pr ovi de f i t t i ngs and speci al s compat i bl e wi t h t he pi pe suppl i ed.

Fi l ament wound or mol ded f i t t i ngs up t o 6 i nches ar e t o conf or m t o AWWA C950. Pr ovi de cement - mor t ar l i ned i r on f i t t i ngs i n accor dance with AWWA C104/ A21. 4 and conf or mi ng t o AWWA C110/ A21. 10 and AWWA C111/ A21. 11. [ Pr ovi de f i t t i ngs and speci al s r equi r ed f or c l osur es, cur ves, bends, br anches and connect i ons t o val ves, pi pe, or st r uct ur es consi st ent wi t h t he det ai l s f ur ni shed by t he manuf act ur er and t o AWWA C300, AWWA C301, or AWWA C303. ] Pr ovi de f i t t i ngs t hat wi l l wi t hst and wor ki ng and t est i ng pr essur es speci f i ed f or t he pi pe.

c. Pr ovi de bel l and spi got j oi nt s wi t h el ast omer i c gasket s i n accor dance with ASTM D4161. Pr ovi de mechani cal l y coupl ed j oi nt s wi t h el ast omer i c gasket , f l anged, t hr eaded and bonded coupl i ng, or bel l and spi got wi t h compat i bl e adhesi ve, pr ovi ded t hey ar e compat i bl e wi t h t he pi pe and convey wat er at t he pr essur e and t emper at ur e of t he pi pe.

2. 1. 1. 4 [ Concr et e Pr essur e Pi pe] [ Pr est r essed Concr et e Pr essur e Pi pe ( PCCP) ] [ and] [ Rei nf or ced Concr et e Cyl i nder Pi pe ( RCCP) ]

2. 1. 1. 4. 1 Pi pi ng, Fi t t i ngs, Joi nt s and Joi nt i ng Mat er i al

[ Pr est r essed concr et e pr essur e pi pe ( PCCP) , AWWA C301.][Reinforced Concr et e Cyl i nder Pi pe ( RCCP) , st eel - cyl i nder t ype AWWA C300.][Concrete pr essur e pi pe, r ei nf or ced wi t h a st eel cyl i nder t hat i s hel i cal l y wr apped wi t h mi l d st eel bar r ei nf or cement AWWA C303.]

[ Pi pe has been desi gned f or t he f ol l owi ng mi ni mum condi t i ons:

a. Pr essur e r at i ng - [ _____] psi

b. Ear t h cover - [ _____] f eet

c. Wat er hammer - [ _____] per cent of pr essur e r at i ng

d. Li ve l oad - [ AASHTO H 20 t r uck l oadi ng] [ _____]

Apr i l 2019 Page 15 SECTI ON 33 11 00

Pr ovi de f i t t i ngs t hat mat ch t he same speci f i cat i on as t hat used f or t he pi pe and ar e desi gned as speci f i ed f or t he pi pe. [ Ut i l i ze [ Type I I ] [ Type V] [ l ow al kal i cement ] pi pe and f i t t i ngs t hat mat ch t he r equi r ement s of ASTM C150/ C150M. ] I ncl ude f act or y i nscr i bed pr essur e r at i ng i dent i f i cat i on mar ki ngs f or pi pe and f i t t i ngs.

Joi nt i ng Mat er i al : Pr ovi de r ubber - gasket j oi nt s compat i bl e wi t h t he t ype usi ng a bel l and spi got j oi nt desi gn of st eel .

2. 1. 1. 5 St eel Pi pi ng

2. 1. 1. 5. 1 Pi pe and Fi t t i ngs

Pipe, AWWA C200. Fi t t i ngs, AWWA C208 and AWWA C200, wi t h r ef er ence t o t he r equi r ement s speci f i ed t her ei n f or " Speci al Sect i ons. " Pr ovi de cement - mor t ar l i ni ng and [ cement - mor t ar ] [ coal - t ar enamel ] [ coal - t ar epoxy] coat i ng on pi pe and f i t t i ngs [ f or under gr ound l i nes] i n accor dance wi t h appl i cabl e AWWA st andar d. Pr ovi de cement - mor t ar l i ni ng on [ pi pe and f i t t i ngs f or abovegr ound l i nes. ] Ut i l i ze pi pe ends and f i t t i ngs compat i bl e f or t he j oi nt s and j oi nt i ng mat er i al s used.

a. Ut i l i ze wel ded or seaml ess pi pe wi t h pl ai n, or shoul der ed and gr ooved ends i n accor dance wi t h AWWA C606 f or use wi t h mechani cal coupl i ngs or bel l - and- spi got ends wi t h r ubber gasket s. Pr ovi de bel l - and- spi got ends f or s i zes l ess t han 6 i nches di amet er i n accor dance wi t h AWWA C200.

b. Pr ovi de f i t t i ngs and speci al s made of t he same mat er i al as t he pi pe.

Use speci al s and f i t t i ngs made of st andar d st eel t ube t ur ns or segment al l y wel ded sect i ons, wi t h ends t o accommodat e t he t ype of coupl i ngs or j oi nt s speci f i ed f or t he pi pe. Mat ch t he t hi ckness r at i ng of pi pe f i t t i ngs and speci al s t o t he t hi ckness speci f i ed and t he pr essur e r at i ng cal cul at ed f or t he pi pe wi t h whi ch t hey ar e used.

Pr ovi de i dent i cal pr ot ect i ve mat er i al s f or f i t t i ngs and speci al s as speci f i ed f or t he pi pe. Hand wr ap, l i ne, or coat speci al s and f i t t i ngs t hat cannot be mechani cal l y wr apped, l i ned, or coat ed usi ng t he same mat er i al used f or t he pi pe wi t h t he same number of appl i cat i ons of each mat er i al , smoot hl y appl i ed.

2. 1. 1. 5. 2 Wal l Thi ckness f or Pi pe and Fi t t i ngs

The mi ni mum met al t hi ckness f or st eel pi pe wal l i s [ _____] i nches, based on st eel havi ng a y i el d st r engt h of [ _____] psi . Pi pe has been desi gned f or t he f ol l owi ng mi ni mum condi t i ons:

Pr essur e r at i ng [ _____] psi

[ Ear t h cover ] [ [ _____] f eet ]

Wat er hammer 40 per cent of pr essur e r at i ng

Li ve l oad AASHTO H 20 t r uck l oadi ng

Al l owabl e def l ect i on 2 per cent of nomi nal pi pe di amet er

Ensur e t hat t he wal l t hi ckness of f i t t i ngs i s equal t o or gr eat er t han t hat r equi r ed f or t he pi pe. Rei nf or ce f i t t i ngs i n accor dance wi t h met hods gi ven i n AWWA M11, Chapt er 13, " Suppl ement ar y Desi gn Dat a and Det ai l s"

Apr i l 2019 Page 16 SECTI ON 33 11 00 when necessar y t o meet t he pr essur e t est r equi r ement s.

2. 1. 1. 5. 3 Joi nt s and Joi nt i ng Mat er i al

Pr ovi de r ubber - gasket ed pi pe and f i t t i ng bel l - and- spi got j oi nt s[ , wel ded j oi nt s, ] or t he mechani cal l y coupl ed t ype usi ng a s l eeve- t ype mechani cal coupl i ng[ , unl ess ot her wi se speci f i ed] . [ Pr ovi de f l anged j oi nt s wher e i ndi cat ed. ] [ Pr ovi de mechani cal l y coupl ed t ype j oi nt s usi ng a s l eeve t ype mechani cal coupl i ng wher e i ndi cat ed. ] [ Pr ovi de [ gr ooved] [ or ] [ shoul der ed] t ype wher e i ndi cat ed. ] [ Pr ovi de i nsul at i ng j oi nt s wher e i ndi cat ed. ] [ I t i s accept abl e t o use [ gr ooved] [ or ] [ shoul der ed] t ype j oi nt s i n l i eu of f l anged j oi nt s. ]

a. Rubber - Gasket ed Bel l - and- Spi got Joi nt s: Pr ovi de j oi nt s and pi pe ends i n accor dance wi t h t he pi pe manuf act ur er ' s st andar d f or t hi s t ype of j oi nt , except t hat t he j oi nt i s t o al so meet t he r equi r ement s speci f i ed f or r ubber - gasket ed j oi nt s and r ubber gasket s i n AWWA C200.

b. Wel ded Joi nt s: Pr ovi de el ect r odes of t he qual i t y speci f i ed i n

AWWA C206.

c. Sl eeve- Type Mechani cal Coupl ed Joi nt s: As speci f i ed i n par agr aph

SLEEVE- TYPE MECHANI CAL COUPLI NGS.

d. [ Gr ooved] [ and] [ Shoul der ed] Type Joi nt s: [ Pr ovi de pi pe ends gr ooved by r ol l gr oovi ng or wi t h wel ded- on adapt er s and cut gr ooves. Pr ovi de gr ooves made by r ol l gr oovi ng wi t h di mensi ons as r ecommended by t he coupl i ng manuf act ur er . Mat ch di mensi ons f or cut gr ooves i n adapt er s t o AWWA C606. ] Coupl i ngs [ and shoul der ed pi pe ends] , AWWA C606. Mat ch t he j oi nt di mensi ons as speci f i ed i n AWWA C606 f or r i gi d j oi nt [ , j oi nt di mensi ons as speci f i ed i n AWWA C606 f or f l exi bl e j oi nt s] .

e. Fl anged Joi nt s: Pr ovi de pi pe ends wi t h st eel f l anges, AWWA C207;

[ Cl ass D] [ Cl ass E] . Bol t s and nut s f or f l anged connect i ons, AWWA C207. Rubber gasket s, AWWA C207; asbest os gasket s ar e not allowed.

f . I nsul at i ng Joi nt s: Desi gned t o pr event met al - t o- met al cont act at t he j oi nt bet ween adj acent sect i ons of pi pi ng. Pr ovi de f l ange t ype j oi nt s wi t h i nsul at i ng gasket , i nsul at i ng bol t s l eeves, and i nsul at i ng washer s. Pr ovi de di el ect r i c t ype gasket s, f ul l f ace, and i n ot her r espect s as r ecommended i n t he Appendi x t o AWWA C115/ A21. 15. Bol t s and nut s as r ecommended i n t he Appendi x to AWWA C115/ A21. 15.

2. 1. 1. 5. 4 Li ni ng [ and Coat i ng] :

a. Cement - Mor t ar Li ni ng: AWWA C205, shop- appl i ed. Mat er i al s f or cement mor t ar l i ni ng i n pl ace as speci f i ed i n AWWA C602.

b. Cement - Mor t ar Coat i ng: AWWA C205, shop- appl i ed.

c. Coal - Tar Enamel Coat i ng: Except as ot her wi se speci f i ed, pr epar e, pr i me, and coat pi pi ng wi t h hot - appl i ed coal - t ar enamel and a bonded [ s i ngl e l ayer of f el t wr ap i n accor dance wi t h AWWA C203] [ doubl e f el t wr aps i n accor dance wi t h AWWA C203] . Pr ovi de shop appl i ed coat i ng of f i br ous- gl ass mat f el t mat er i al as speci f i ed i n

Apr i l 2019 Page 17 SECTI ON 33 11 00

Sect i on 10 of AWWA C203. Do not use asbest os f el t .

d. Coal - Tar Epoxy Coat i ng: Cl ean, pr i me, and t opcoat pi pi ng wi t h coal - t ar epoxy coat i ng syst em i n accor dance wi t h AWWA C210.

Shop- appl y coat i ng.

[ 2. 1. 1. 5. 5 St eel Pi pi ng f or Ser vi ce Li nes

Pipe, ASTM A53/ A53M, St andar d Wei ght , z i nc- coat ed. Fi t t i ngs, ASME B16. 4, Cl ass 125, z i nc coat ed; or ASME B16. 3, Cl ass 150, z i nc coat ed, t hr eaded.

Mechani cal l y appl y, i n a f act or y or pl ant especi al l y equi pped f or t he pur pose, t he pr ot ect i ve mat er i al s f or st eel pi pe. Unl ess ot her wi se i ndi cat ed, t he mat er i al s consi st of [ one of t he f ol l owi ng] [ t he f ol l owi ng] f or t he i ndi cat ed pi pe mat er i al and si ze:

Cl ean pi pe and f i t t i ngs l ess t han 3 i nches i n di amet er of f or ei gn mat er i al by wi r e br ushi ng and sol vent c l eani ng, and appl y one coat of coal - t ar pr i mer and t wo coat s of coal - t ar enamel mat chi ng t he r equi r ement s of AWWA C203; pr ot ect t hr eaded ends of pi pe and f i t t i ngs pr i or t o coat i ng.

] ] 2. 1. 1. 6 Copper Pi pe For Ser vi ce Li nes

2. 1. 1. 6. 1 Copper Tubi ng and Associ at ed Fi t t i ngs

Provide ASTM B88, Type K copper t ubi ng. Pr ovi de AWWA C800 f i t t i ngs.

AWWA C800 i ncl udes ASME B1. 20. 3, ASME B1. 20. 1, ASME B16. 18 sol der - t ype j oi nt f i t t i ngs.

[ 2. 1. 1. 7 Tr enchl ess Pi pi ng

2. 1. 1. 7. 1 PVC Pi pe

AWWA C900 pl ai n end meet i ng or exceedi ng ASTM D1784 cel l c l ass 12454, pl ast i c f or mul at ed f or f usi ng wi t h a mi ni mum Pr essur e Cl ass [ 235 ( DR18) ] [ 305 ( DR 14) ] wi t h duct i l e i r on out si de di amet er ( DI OD) .

2. 1. 1. 7. 1. 1 But t Fusi on

Use but t f usi on j oi nt i ng met hod f or pl ai n- end PVC pi pe. Compl y wi t h AWWA C900 and AWWA C605 f or but t f usi on j oi nt s. No of f set i n al i gnment bet ween adj acent pi pe j oi nt s of f i t t i ngs i s per mi t t ed. The f usi on t echni c i an must be qual i f i ed by t he f usi on equi pment manuf act ur er t o t her mal l y but t - f use t he si ze of pi pe used at t he t i me of f usi on per f or mance. Each j oi nt must be dat al ogged, r ecor ded and submi t t ed f or r evi ew and meet t he r equi r ement s of ASTM F1674.

2. 1. 1. 7. 2 PE Pi pe

Pr ovi de i n accor dance wi t h AWWA C906, ASTM D3035, ASTM F1962, PE4710, wi t h mat er i al desi gnat i on code [ CC2] [ CC3] wi t h a mi ni mum Pr essur e Cl ass of [ 250 ( DR 9) ] [ 335 ( DR 7) ] wi t h duct i l e i r on out si de di amet er ( DI OD) .

2. 1. 1. 7. 2. 1 But t Fusi on Fi t t i ngs

Use AWWA C906, AWWA M55, ASTM D3261 ANSI Cl ass 250 or as necessar y t o pr ovi de mi ni mum pr essur e r at i ng.

Apr i l 2019 Page 18 SECTI ON 33 11 00

2. 1. 1. 7. 2. 2 But t Fusi on

Use but t f usi on j oi nt i ng met hod f or pl ai n- end PE pi pe. Compl y wi t h AWWA C906 and ASTM F2620 f or But t Fusi on j oi nt s. No of f set i n al i gnment bet ween adj acent pi pe j oi nt s of f i t t i ngs i s per mi t t ed. The f usi on t echni c i an must be qual i f i ed by t he f usi on equi pment manuf act ur er t o t her mal l y but t - f use t he si ze of pi pe used at t he t i me of f usi on per f or mance. Each j oi nt must be dat al ogged, r ecor ded and submi t t ed f or review.

2. 1. 1. 7. 3 Duct i l e I r on Bal l and Socket Joi nt

Use cent r i f ugal l y cast duct i l e i r on pi pe meet i ng t he appl i cabl e r equi r ement s of AWWA C151/ A21. 51 [ Pr essur e Cl ass [ _____] ] [ Thi ckness Cl ass [ _____] ] and i n accor dance wi t h pi pe manuf act ur er ' s i nst r uct i ons. The separ at el y cast Duct i l e- I r on bal l , bel l and r et ai ner r i ng conf or ms wi t h t he r equi r ement s of ASTM A536, Gr ade 70- 50- 05. Cr i t i cal sur f aces of t he bal l , bel l socket and r et ai ner r i ng ar e machi ned.

2. 1. 1. 7. 3. 1 Fittings

Duct i l e i r on bel l , bal l and r et ai ner r i ng meet i ng t he appl i cabl e r equi r ement s of AWWA C110/ A21. 10and i n accor dance wi t h pi pe manuf act ur er ' s i nst r uct i ons f or bal l and socket j oi nt pi pe.

][ 2. 1. 1. 8 Pi pi ng Beneat h Rai l r oad Ri ght - of - Way

Pi pi ng passi ng under t he r i ght - of - way of a commer ci al r ai l r oad i s t o conf or m t o t he speci f i cat i ons f or pi pel i nes conveyi ng nonf l ammabl e subst ances i n AREMA Eng Man. Pr ovi de duct i l e- i r on pi pe i n l i eu of cast - i r on pi pe. Duct i l e- i r on r ai l r oad cr ossi ng casi ng pi pe i s t o conf or m t o and have st r engt h comput ed i n accor dance wi t h ASTM A746.

] 2. 1. 2 Valves

[ Pr ovi de a pr ot ect i ve i nt er i or coat i ng i n accor dance wi t h AWWA C550.

] 2. 1. 2. 1 Gat e Val ves 3 I nch Si ze and Lar ger [ on Bur i ed Pi pi ng]

AWWA C500, AWWA C509, AWWA C515, or UL 262 and:

a. AWWA C500: nonr i s i ng st em t ype wi t h doubl e- di sc gat e and mechani cal - j oi nt ends or push- on j oi nt ends compat i bl e f or t he adj oi ni ng pi pe

b. AWWA C509 or AWWA C515: nonr i s i ng st em t ype wi t h mechani cal - j oi nt ends[ or r esi l i ent - seat ed gat e val ves 3 t o 12 i nches i n s i ze]

c. UL 262: i nsi de- scr ew t ype wi t h oper at i ng nut , doubl e- di sc or spl i t - wedge t ype gat e, desi gned f or a hydr aul i c wor ki ng pr essur e of 175[ _____] psi , and have mechani cal - j oi nt ends or push- on j oi nt ends as appr opr i at e f or t he pi pe t o whi ch i t i s j oi ned.

Mat ch mat er i al s f or UL 262 gat e val ves t o t he r ef er ence st andar ds speci f i ed i n AWWA C500. Gat e val ves open by count er cl ockwi se r ot at i on of t he val ve st em. St uf f i ng boxes have 0- r i ng st em seal s[ , except f or t hose val ves f or whi ch gear i ng i s speci f i ed, i n whi ch case use convent i onal packi ng i n pl ace of 0- r i ng seal ] . St uf f i ng boxes ar e bol t ed and const r uct ed so as t o per mi t easy r emoval of par t s f or r epai r . [ Use gat e

Apr i l 2019 Page 19 SECTI ON 33 11 00 val ves wi t h speci al ends f or connect i on t o[ cement pi pi ng or ] s l eeve- t ype mechani cal coupl i ng i n l i eu of mechani cal - j oi nt ends and push- on j oi nt ends. ] Pr ovi de val ve ends and gasket s f or connect i on t o[ cement pi pi ng or t o] s l eeve- t ype mechani cal coupl i ngs t hat conf or m t o t he r equi r ement s speci f i ed [ r espect i vel y ] f or t he [ j oi nt or ] coupl i ng. [ Pr ovi de AWWA C500 [ _____] i nch gat e val ves wi t h gear i ng[ and i ndi cat or ] . ] [ Wher e an i ndi cat or post ar e shown, pr ovi de an i ndi cat or post f l ange f or AWWA C500, AWWA C509, or AWWA C515 gat e val ves conf or mi ng t o t he r equi r ement s of UL 262. ] [ Pr ovi de AWWA C500 [ _____] i nch gat e val ves wi t h bypasses. ] [ Pr ovi de gat e val ves [ on [ _____] i nch ser vi ce l i nes] wi t h t hr eaded ends.

] [ Gat e val ves[ on [ _____] i nch ser vi ce l i nes] have ends compat i bl e wi t h j oi ni ng t o t he pi pe used; [ push- on j oi nt ends or mechani cal - j oi nt ends f or j oi ni ng t o duct i l e- i r on pi pe] [ or ] [ push- on j oi nt ends or mechani cal - j oi nt ends f or j oi ni ng t o PVC wat er mai n pi pe] ; wi t h AWWA C111/ A21. 11 gasket s and pi pe ends. ] Pr ovi de al l val ves f r om one manufacturer.

2. 1. 2. 2 Gat e Val ves 3 I nch Si ze and Lar ger [ i n Val ve Pi t ( s) ] [ and] [ Abovegr ound Locat i ons]

AWWA C500, AWWA C509, AWWA C515, or UL 262 and:

a. AWWA C500: [ out s i de- scr ew- and- yoke r i s i ng- st em] [ nonr i s i ng st em] t ype wi t h [ doubl e- di sc] [ sol i d- wedge] gat es and f l anged ends

b. AWWA C509 or AWWA C515: [ out s i de- scr ew- and- yoke r i s i ng- st em] [ nonr i s i ng st em] t ype wi t h f l anged ends

c. UL 262: [ out s i de- scr ew- and- yoke] [ i nsi de- scr ew] t ype, wi t h [ doubl e- di sc or spl i t - wedge] [ sol i d or one- pi ece] t ype gat e and f l anged ends, and desi gned f or a hydr aul i c wor ki ng pr essur e of 175[ _____] psi

Mat ch mat er i al s f or UL 262 gat e val ves t o t he r ef er ence st andar ds speci f i ed i n AWWA C500. [ [ [ _____] i nch ] Gat e val ves ar e nonr i s i ng st em t ype or i nsi de- scr ew t ype [ wher e i ndi cat ed] . ] [ [ [ _____] i nch si ze ] Gat e val ves ar e sol i d- wedge gat es or sol i d or one- pi ece t ype gat es[ wher e i ndi cat ed] . ] Pr ovi de gat e val ves wi t h handwheel s t hat open by count er cl ockwi se r ot at i on of t he val ve st em. Bol t and const r uct st uf f i ng boxes so as t o per mi t easy r emoval of par t s f or r epai r . I n l i eu of f l anged ends, pr ovi de val ves wi t h [ gr ooved] [ or ] [ shoul der ed] ends compat i bl e wi t h [ gr ooved] [ or ] [ shoul der ed] t ype j oi nt s, as speci f i ed i n t he par agr aph DUCTI LE- I RON PI PI NG. [ Pr ovi de val ves [ _____] i nch si ze wi t h gear i ng[ and i ndi cat or ] , AWWA C500 or AWWA C509. ] [ Pr ovi de [ _____] i nch si ze val ve wi t h bypasses, AWWA C500.] Pr ovi de al l val ves f r om one manufacturer.

2. 1. 2. 3 Check Val ves

[ Pr ovi de a pr ot ect i ve i nt er i or coat i ng i n accor dance wi t h AWWA C550.

] Swi ng- check t ype, AWWA C508 or UL 312 and:

a. AWWA C508: I r on or st eel body and cover and f l anged ends

b. UL 312: Cast i r on or st eel body and cover , f l anged ends, and desi gned f or a mi ni mum wor ki ng pr essur e of [ 150] [ _____] psi .

Mat er i al s f or UL 312 check val ves ar e t o mat ch t he r ef er ence st andar ds speci f i ed i n AWWA C508. Pr ovi de check val ves wi t h a c l ear por t openi ng. [ Pr ovi de [ spr i ng- l oaded] [ wei ght - l oaded] check val ves[ wher e i ndi cat ed] . ] [

Apr i l 2019 Page 20 SECTI ON 33 11 00

Cl ass 125 f l anges ar e t o mat ch ASME B16. 1.] Pr ovi de [ gr ooved] [ or ] [ shoul der ed] ends [ gr ooved] [ or ] [ shoul der ed] t ype j oi nt s, as speci f i ed i n t he par agr aph DUCTI LE- I RON PI PI NG i n l i eu of f l anged ends. Pr ovi de al l check val ves f r om one manuf act ur er .

2. 1. 2. 4 Rubber - Seat ed But t er f l y Val ves

Pr ovi de r ubber - seat ed but t er f l y val ves and waf er t ype val ves t hat mat ch t he per f or mance r equi r ement s of AWWA C504. Waf er t ype val ves not meet i ng l ayi ng l engt h r equi r ement s ar e accept abl e i f suppl i ed and i nst al l ed wi t h a spacer , pr ovi di ng t he speci f i ed l ayi ng l engt h. Meet al l t est s r equi r ed by AWWA C504. Fl anged- end val ves ar e r equi r ed i n a pi t .