Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 08 52 00

WOOD WI NDOWS

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ALUMI NUM ASSOCI ATI ON ( AA)

AA DAF45 ( 2003; Reaf f i r med 2009) Desi gnat i on Syst em f or Al umi num Fi ni shes

AMERI CAN ARCHI TECTURAL MANUFACTURERS ASSOCI ATI ON ( AAMA)

AAMA 2603 ( 2015) Vol unt ar y Speci f i cat i on, Per f or mance Requi r ement s and Test Pr ocedur es f or Pi gment ed Or gani c Coat i ngs on Al umi num Ext r usi ons and Panel s

AAMA 2604 ( 2013) Vol unt ar y Speci f i cat i on, Per f or mance Requi r ement s and Test Pr ocedur es f or Hi gh Per f or mance Or gani c Coat i ngs on Al umi num Ext r usi ons and Panel s

AAMA/ WDMA/ CSA 101/ I . S. 2/ A440 ( 2011; Updat e 1 2014) Nor t h Amer i can Fenest r at i on St andar d/ Speci f i cat i on f or Wi ndows, Door s, and Skyl i ght s

ASTM I NTERNATI ONAL ( ASTM)

ASTM D1784 ( 2011) St andar d Speci f i cat i on f or Ri gi d Pol y( Vi nyl Chl or i de) ( PVC) Compounds and Chl or i nat ed Pol y( Vi nyl Chl or i de) ( CPVC) Compounds

ASTM D3656/ D3656M ( 2013) I nsect Scr eeni ng and Louver Cl ot h Woven f r om Vi nyl - Coat ed Gl ass Yar ns

ASTM D6007 ( 2014) St andar d Test Met hod f or Det er mi ni ng For mal dehyde Concent r at i on i n Ai r f r om Wood Pr oduct s Usi ng a Smal l Scal e Chamber

ASTM D6330 ( 1998; R 2014) St andar d Pr act i ce f or Det er mi nat i on of Vol at i l e Or gani c Compounds ( Excl udi ng For mal dehyde) Emi ssi ons f r om Wood- Based Panel s Usi ng Smal l Envi r onment al Chamber s Under Def i ned Test Condi t i ons

ASTM E1333 ( 2014) Det er mi ni ng For mal dehyde Concent r at i ons i n Ai r and Emi ssi on Rat es

Apr i l 2019 Page 1 SECTI ON 08 52 00 f r om Wood Pr oduct s Usi ng a Lar ge Chamber

NATI ONAL FENESTRATI ON RATI NG COUNCI L ( NFRC)

NFRC 100 ( 2014) Pr ocedur e f or Det er mi ni ng Fenest r at i on Pr oduct U- Fact or s

NFRC 200 ( 2014) Pr ocedur e f or Det er mi ni ng Fenest r at i on Pr oduct Sol ar Heat Gai n Coef f i c i ent and Vi s i bl e Tr ansmi t t ance at Nor mal I nci dence

SCREEN MANUFACTURERS ASSOCI ATI ON ( SMA)

SMA 1004 ( 1987; R 1998) Al umi num Tubul ar Fr ame Scr eens f or Wi ndows

U. S. DEPARTMENT OF ENERGY ( DOE)

Ener gy St ar ( 1992; R 2006) Ener gy St ar Ener gy Ef f i c i ency Label i ng Syst em ( FEMP)

WI NDOW AND DOOR MANUFACTURERS ASSOCI ATI ON ( WDMA)

WDMA I . S. 4 ( 2013) Pr eser vat i ve Tr eat ment f or Mi l l wor k

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Wood Wi ndows; G

I ndi cat e el evat i ons of uni t s, f ul l - s i ze sect i ons, f ast eni ngs, met hods of i nst al l at i on and anchor age, met hod of gl azi ng, l ocat i ons of oper at i ng har dwar e, mul l i on det ai l s, met hod and mat er i al f or weat her st r i ppi ng, bar and munt i n l ayout s, met hod of at t achi ng i nsect scr eens and st or m wi ndows, det ai l s of i nst al l at i on, and connect i ons wi t h ot her wor k.

SD- 03 Pr oduct Dat a

Wood Wi ndows; G

SD- 08 Manuf act ur er ' s I nst r uct i ons

Wood Wi ndows

Submi t manuf act ur er ' s wr i t t en i nst r uct i ons f or i nst al l at i on.

SD- 10 Oper at i on and Mai nt enance Dat a

Wood Wi ndows, Dat a Package 1; G

Submi t dat a package i n accor dance wi t h Sect i on 01 78 23

Apr i l 2019 Page 2 SECTI ON 08 52 00

OPERATI ON AND MAI NTENANCE DATA.

1. 3 DELI VERY AND STORAGE

Del i ver wi ndows t o s i t e i n seal ed undamaged car t ons or i n pal l et i zed mul t i pl e uni t s. Pr ot ect f r om damage, dampness and ext r eme t emper at ur e or humi di t y changes. St or e under cover i n wel l - vent i l at ed encl osed space.

Do not st or e i n a bui l di ng under const r uct i on unt i l concr et e, masonr y, and pl ast er ar e dr y. Repl ace def ect i ve or damaged wi ndows.

1. 4 MATERI AL I DENTI FI CATI ON REQUI REMENTS

PART 2 PRODUCTS

2. 1 PRODUCT SUSTAI NABI LI TY CRI TERI A

For pr oduct s i n t hi s sect i on, wher e appl i cabl e and t o ext ent al l owed by per f or mance cr i t er i a, pr ovi de and document t he f ol l owi ng:

2. 1. 1 Reduced VOC' s f or Wi ndow Mat er i al s

Pr oduct s must not cont ai n added ur ea f or mal dehyde and must meet ot her r educed VOC r equi r ement s as st at ed wi t hi n t hi s sect i on.

2. 1. 2 Ener gy Ef f i c i ent Equi pment f or Resi dent i al Wi ndows

Provide Ener gy St ar r esi dent i al wi ndows.

2. 2 MATERIALS

2. 2. 1 Engi neer ed Wood Pr oduct s

Pr oduct s cannot cont ai n added ur ea- f or mal dehyde. Det er mi ne Vol at i l e Or gani c Compounds ( VOCs) , excl udi ng f or mal dehyde, emi t t ed f r om manuf act ur ed wood- based panel s i n accor dance wi t h ASTM D6330.

2. 3 WOOD WI NDOWS

Wood wi ndows must consi st of compl et e uni t s i ncl udi ng sash, gl ass, f r ame, weat her st r i ppi ng, i nsect scr een, and har dwar e. Wi ndow uni t s must meet t he Gr ade 40 r equi r ement s of AAMA/ WDMA/ CSA 101/ I . S. 2/ A440, except maxi mum ai r i nf i l t r at i on must not exceed 0. 34 CFM per l i near f oot of sash cr ack when t est ed under uni f or m st at i c ai r pr essur e di f f er ence of 1. 57 psf .

Resi dent i al gl azed syst ems ( i ncl udi ng f r ames and gl ass) must be Ener gy St ar qual i f i ed pr oduct s as appr opr i at e t o Sout her n c l i mat e zone.

Non- r esi dent i al gl azed syst ems ( i ncl udi ng f r ames and gl ass) must be cer t i f i ed by t he Nat i onal Fenest r at i on Rat i ng Counci l wi t h a whol e- wi ndow Sol ar Heat Gai n Coef f i c i ent ( SHGC) maxi mum of 0. 30 det er mi ned accor di ng t o NFRC 200 pr ocedur es and a U- f act or maxi mum of 0. 46 Bt u per squar e f oot by ht by degr ee F i n accor dance wi t h NFRC 100. I n addi t i on t o gener al har dwar e r equi r ement s of AAMA/ WDMA/ CSA 101/ I . S. 2/ A440, pr ovi de har dwar e f or var i ous wi ndow t ypes as i ndi cat ed bel ow. Gl ass and gl azi ng mat er i al s must conf or m t o Sect i on 08 81 00 GLAZI NG. . Wood member s whi ch wi l l r ecei ve t r anspar ent f i ni sh must be i n one pi ece, not f i nger - j oi nt ed.

2. 3. 1 Si ngl e- Hung and Doubl e- Hung Wi ndows

Pr ovi de wi t h one sash f ast ener and t wo sash l i f t s , except pr ovi de one sash

Apr i l 2019 Page 3 SECTI ON 08 52 00 l i f t when wi ndow i s f i t t ed wi t h a bal ance t hat count er bal ances wei ght of sash.

2. 3. 2 Awni ng Wi ndows ( Top Hi nged)

Awni ng wi ndow vent i l at or s i n same bay must oper at e separ at el y. Pr ovi de t wo or mor e hi nges, pi vot s, or sash- suppor t i ng ar ms f or each oper at i ve sash t o al l ow easy oper at i on, subst ant i al suppor t and cl eani ng of bot h s i des of sash f r om i nsi de. Pr ovi de l at ches f or secur i ng each sash i f oper at i ng devi ces do not i ncl ude l ocki ng f eat ur es. Pr ovi de oper at i ng devi ces f or cont r ol l i ng posi t i on of sash, i ncl udi ng f ul l open, t i ght c l ose, and i nt er medi at e f i r m hol d. Pr ovi de oper at i ng devi ces wi t h r ot ar y oper at or s of wor m- gear t ype wi t h wear - r esi st ant and i mpact - r esi st ant gear s or l ever oper at or s of l ever handl e, of f - set ar m t ype. Pr ovi de vent i ng sash wi t h cor r osi on r esi st ant st eel hi nges connect ed t o t op and bot t om r ai l s of sash. When l ever oper at or s ar e used, oper at i ng ar ms must be adj ust abl e so t hat even sash edge cont act can be mai nt ai ned.

2. 3. 3 Casement Wi ndows

Pr ovi de t wo or mor e hi nges, pi vot s, or sash- suppor t i ng ar ms f or each oper at i ve sash t o al l ow easy oper at i on, subst ant i al suppor t and cl eani ng of bot h s i des of sash f r om i nsi de. Pr ovi de l at ches f or secur i ng each sash i f oper at i ng devi ces do not i ncl ude l ocki ng f eat ur es. Pr ovi de oper at i ng devi ces f or cont r ol l i ng t he posi t i on of t he oper at i ve sash, i ncl udi ng f ul l open, t i ght c l ose, and i nt er medi at e f i r m hol d. Oper at i ng devi ces must i ncl ude r ot ar y gear s and adj ust abl e oper at i ng ar ms so t hat even sash cont act can be mai nt ai ned.

2. 3. 4 Hor i zont al - Sl i di ng Wi ndows

Pr ovi de l at ches, pul l s, and cor r osi on r esi st ant st eel s l i des necessar y t o cont r ol and secur e wi ndow. Pr ovi de f or c l eani ng of bot h s i des of sash f r om i nsi de.

2. 3. 5 St at i onar y Wi ndows

Pr ovi de f i xed sash and basi c f r ame i n accor dance wi t h

AAMA/ WDMA/ CSA 101/ I . S. 2/ A440.

2. 4 ACCESSORIES

2. 4. 1 Adhesives

Compl y wi t h appl i cabl e r egul at i ons r egar di ng t oxi c and hazar dous mat er i al s, and as speci f i ed i n Sect i on 07 92 00 JOI NT SEALANTS. For i nt er i or appl i cat i on of j oi nt seal ant s compl y wi t h appl i cabl e r egul at i ons r egar di ng r educed VOC' s as speci f i ed i n Sect i on 07 92 00 JOI NT SEALANTS and Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG.

2. 5 FINISHES

2. 5. 1 Paint

Fur ni sh wi ndows wi t h f act or y- pr i med sur f aces whi ch wi l l be exempt f r om f i r st pai nt coat appl i cat i on r equi r ed i n Sect i on 09 90 00 PAI NTS AND

COATINGS.

Apr i l 2019 Page 4 SECTI ON 08 52 00

2. 5. 2 Vi nyl ( PVC) Cl addi ng

Pr eser vat i ve t r eat al l basi c wood f r ame and sash member s i n accor dance with WDMA I . S. 4 and Sect i on 06 10 00 ROUGH CARPENTRY, except do not use pent achl or ophenol . Cl ad al l ext er i or sur f aces wi t h r i gi d pol yvi nyl sheat hi ng, compl yi ng wi t h ASTM D1784, c l ass 14344- C, not l ess t han 35 mi l aver age t hi ckness.

2. 5. 3 Al umi num Cl addi ng

Pr eser vat i ve t r eat al l basi c wood f r ame and sash member s i n accor dance with WDMA I . S. 4, except do not use pent achl or ophenol . Cl ad al l ext er i or sur f aces wi t h r ol l f or med al umi num wi t h j oi nt s seal ed dur i ng assembl y.

Al umi num cl ad f r ames and sash must meet per f or mance r equi r ement s of

AAMA/ WDMA/ CSA 101/ I . S. 2/ A440.

2. 5. 3. 1 Al umi num Fi ni sh

Fact or y f i ni sh wi t h anodi c coat i ng or or gani c coat i ng.

2. 5. 3. 2 Anodi c Coat i ng

Conf or m t o AA DAF45. Fi ni sh must be cl ear ( nat ur al ) , desi gnat i on AA- M10- C22- A41, Ar chi t ect ur al Cl ass I 0. 7 mi l or t hi cker ; i nt egr al col or - anodi zed, desi gnat i on AA- M10- C22- A42, Ar chi t ect ur al Cl ass I 0. 7 mi l or t hi cker ; or el ect r ol yt i cal l y deposi t ed col or - anodi zed, desi gnat i on AA- M10- C22- A44, Ar chi t ect ur al Cl ass I 0. 7 mi l or t hi cker . Fi ni sh Col or :

as i ndi cat ed.

2. 5. 3. 3 Or gani c Coat i ng

Cl ean and pr i me exposed al umi num sur f aces. Pr ovi de baked enamel f i ni sh i n accor dance wi t h AAMA 2603 wi t h t ot al dr y f i l m t hi ckness not l ess t han 0. 8 mi l . Fi ni sh col or as i ndi cat ed.

2. 6 I NSECT SCREENS

ASTM D3656/ D3656M, Cl ass 2, 18 by 14 mesh, col or char coal . Al umi num f r ames t o meet SMA 1004.

PART 3 EXECUTI ON

3. 1 INSTALLATION

Any mat er i al s t hat show vi sual evi dence of bi ol ogi cal gr owt h due t o t he pr esence of moi st ur e must not be i nst al l ed on t he bui l di ng pr oj ect .

3. 1. 1 Wood and Wood Cl ad Wi ndows

I nst al l i n accor dance wi t h t he appr oved i nst al l at i on i nst r uct i ons.

Secur el y anchor wi ndows i n pl ace. I nst al l and seal wi ndows i n a manner t hat wi l l pr event ent r ance of wat er and wi nd.

3. 1. 2 I nsect Scr een

I nst al l scr een panel s i n accor dance wi t h manuf act ur er ' s i nst r uct i ons.

I nst al l al umi num f r amed scr eens i n accor dance wi t h SMA 1004.

Apr i l 2019 Page 5 SECTI ON 08 52 00

3. 2 ADJUSTMENTS

Make f i nal adj ust ment f or pr oper oper at i on of vent i l at i ng uni t af t er gl azi ng. Make adj ust ment s t o oper at i ng sash or vent i l at or s t o assur e smoot h oper at i on. Uni t s must be weat her t i ght when l ocked cl osed. Ver i f y pr oduct s ar e pr oper l y i nst al l ed, connect ed, and adj ust ed.

3. 3 CLEANING

Cl ean wi ndows on bot h ext er i or and i nt er i or i n accor dance wi t h manuf act ur er ' s r ecommendat i ons.

- - End of Sect i on - -

Apr i l 2019 Page 6 SECTI ON 08 52 00